--- description: 'Learn how to administer GitLab Pages.' --- # GitLab Pages administration > - [Introduced][ee-80] in GitLab EE 8.3. > - Custom CNAMEs with TLS support were [introduced][ee-173] in GitLab EE 8.5. > - GitLab Pages [was ported][ce-14605] to Community Edition in GitLab 8.17. > - Support for subgroup project's websites was > [introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/30548) in GitLab 11.8. GitLab Pages allows for hosting of static sites. It must be configured by an administrator. Separate [user documentation][pages-userguide] is available. NOTE: **Note:** This guide is for Omnibus GitLab installations. If you have installed GitLab from source, see [GitLab Pages administration for source installations](source.md). ## Overview GitLab Pages makes use of the [GitLab Pages daemon], a simple HTTP server written in Go that can listen on an external IP address and provide support for custom domains and custom certificates. It supports dynamic certificates through SNI and exposes pages using HTTP2 by default. You are encouraged to read its [README][pages-readme] to fully understand how it works. In the case of [custom domains](#custom-domains) (but not [wildcard domains](#wildcard-domains)), the Pages daemon needs to listen on ports `80` and/or `443`. For that reason, there is some flexibility in the way which you can set it up: 1. Run the Pages daemon in the same server as GitLab, listening on a secondary IP. 1. Run the Pages daemon in a separate server. In that case, the [Pages path](#change-storage-path) must also be present in the server that the Pages daemon is installed, so you will have to share it via network. 1. Run the Pages daemon in the same server as GitLab, listening on the same IP but on different ports. In that case, you will have to proxy the traffic with a loadbalancer. If you choose that route note that you should use TCP load balancing for HTTPS. If you use TLS-termination (HTTPS-load balancing) the pages will not be able to be served with user provided certificates. For HTTP it's OK to use HTTP or TCP load balancing. In this document, we will proceed assuming the first option. If you are not supporting custom domains a secondary IP is not needed. ## Prerequisites Before proceeding with the Pages configuration, you will need to: 1. Have an exclusive root domain for serving GitLab Pages. Note that you cannot use a subdomain of your GitLab's instance domain. 1. Configure a **wildcard DNS record**. 1. (Optional) Have a **wildcard certificate** for that domain if you decide to serve Pages under HTTPS. 1. (Optional but recommended) Enable [Shared runners](../../ci/runners/README.md) so that your users don't have to bring their own. 1. (Only for custom domains) Have a **secondary IP**. NOTE: **Note:** If your GitLab instance and the Pages daemon are deployed in a private network or behind a firewall, your GitLab Pages websites will only be accessible to devices/users that have access to the private network. ### Add the domain to the Public Suffix List The [Public Suffix List](https://publicsuffix.org) is used by browsers to decide how to treat subdomains. If your GitLab instance allows members of the public to create GitLab Pages sites, it also allows those users to create subdomains on the pages domain (`example.io`). Adding the domain to the Public Suffix List prevents browsers from accepting [supercookies](https://en.wikipedia.org/wiki/HTTP_cookie#Supercookie), among other things. Follow [these instructions](https://publicsuffix.org/submit/) to submit your GitLab Pages subdomain. For instance, if your domain is `example.io`, you should request that `example.io` is added to the Public Suffix List. GitLab.com added `gitlab.io` [in 2016](https://gitlab.com/gitlab-com/infrastructure/issues/230). ### DNS configuration GitLab Pages expect to run on their own virtual host. In your DNS server/provider you need to add a [wildcard DNS A record][wiki-wildcard-dns] pointing to the host that GitLab runs. For example, an entry would look like this: ``` *.example.io. 1800 IN A 192.0.2.1 *.example.io. 1800 IN AAAA 2001::1 ``` where `example.io` is the domain under which GitLab Pages will be served and `192.0.2.1` is the IPv4 address of your GitLab instance and `2001::1` is the IPv6 address. If you don't have IPv6, you can omit the AAAA record. NOTE: **Note:** You should not use the GitLab domain to serve user pages. For more information see the [security section](#security). [wiki-wildcard-dns]: https://en.wikipedia.org/wiki/Wildcard_DNS_record ## Configuration Depending on your needs, you can set up GitLab Pages in 4 different ways. The following options are listed from the easiest setup to the most advanced one. The absolute minimum requirement is to set up the wildcard DNS since that is needed in all configurations. ### Wildcard domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) --- URL scheme: `http://page.example.io` This is the minimum setup that you can use Pages with. It is the base for all other setups as described below. NGINX will proxy all requests to the daemon. The Pages daemon doesn't listen to the outside world. 1. Set the external URL for GitLab Pages in `/etc/gitlab/gitlab.rb`: ```ruby pages_external_url 'http://example.io' ``` 1. [Reconfigure GitLab][reconfigure]. Watch the [video tutorial][video-admin] for this configuration. ### Wildcard domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate --- URL scheme: `https://page.example.io` NGINX will proxy all requests to the daemon. Pages daemon doesn't listen to the outside world. 1. Place the certificate and key inside `/etc/gitlab/ssl` 1. In `/etc/gitlab/gitlab.rb` specify the following configuration: ```ruby pages_external_url 'https://example.io' pages_nginx['redirect_http_to_https'] = true pages_nginx['ssl_certificate'] = "/etc/gitlab/ssl/pages-nginx.crt" pages_nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/pages-nginx.key" ``` where `pages-nginx.crt` and `pages-nginx.key` are the SSL cert and key, respectively. 1. [Reconfigure GitLab][reconfigure]. ### Additional configuration for Docker container The GitLab Pages daemon will not have permissions to bind mounts when it runs in a Docker container. To overcome this issue you'll need to change the chroot behavior: 1. Edit `/etc/gitlab/gitlab.rb`. 1. Set the `inplace_chroot` to `true` for GitLab Pages: ```ruby gitlab_pages['inplace_chroot'] = true ``` 1. [Reconfigure GitLab][reconfigure]. NOTE: **Note:** `inplace_chroot` option might not work with the other features, such as [Pages Access Control](#access-control). The [GitLab Pages README](https://gitlab.com/gitlab-org/gitlab-pages#caveats) has more information about caveats and workarounds. ## Advanced configuration In addition to the wildcard domains, you can also have the option to configure GitLab Pages to work with custom domains. Again, there are two options here: support custom domains with and without TLS certificates. The easiest setup is that without TLS certificates. In either case, you'll need a secondary IP. If you have IPv6 as well as IPv4 addresses, you can use them both. ### Custom domains **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Secondary IP --- URL scheme: `http://page.example.io` and `http://domain.com` In that case, the Pages daemon is running, NGINX still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains are supported, but no TLS. 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby pages_external_url "http://example.io" nginx['listen_addresses'] = ['192.0.2.1'] pages_nginx['enable'] = false gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001::2]:80'] ``` where `192.0.2.1` is the primary IP address that GitLab is listening to and `192.0.2.2` and `2001::2` are the secondary IPs the GitLab Pages daemon listens on. If you don't have IPv6, you can omit the IPv6 address. 1. [Reconfigure GitLab][reconfigure]. ### Custom domains with TLS support **Requirements:** - [Wildcard DNS setup](#dns-configuration) - Wildcard TLS certificate - Secondary IP --- URL scheme: `https://page.example.io` and `https://domain.com` In that case, the Pages daemon is running, NGINX still proxies requests to the daemon but the daemon is also able to receive requests from the outside world. Custom domains and TLS are supported. 1. Edit `/etc/gitlab/gitlab.rb`: ```ruby pages_external_url "https://example.io" nginx['listen_addresses'] = ['192.0.2.1'] pages_nginx['enable'] = false gitlab_pages['cert'] = "/etc/gitlab/ssl/example.io.crt" gitlab_pages['cert_key'] = "/etc/gitlab/ssl/example.io.key" gitlab_pages['external_http'] = ['192.0.2.2:80', '[2001::2]:80'] gitlab_pages['external_https'] = ['192.0.2.2:443', '[2001::2]:443'] ``` where `192.0.2.1` is the primary IP address that GitLab is listening to and `192.0.2.2` and `2001::2` are the secondary IPs where the GitLab Pages daemon listens on. If you don't have IPv6, you can omit the IPv6 address. 1. [Reconfigure GitLab][reconfigure]. ### Custom domain verification To prevent malicious users from hijacking domains that don't belong to them, GitLab supports [custom domain verification](../../user/project/pages/custom_domains_ssl_tls_certification/index.md#steps). When adding a custom domain, users will be required to prove they own it by adding a GitLab-controlled verification code to the DNS records for that domain. If your userbase is private or otherwise trusted, you can disable the verification requirement. Navigate to `Admin area ➔ Settings` and uncheck **Require users to prove ownership of custom domains** in the Pages section. This setting is enabled by default. ### Let's Encrypt integration > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/28996) in GitLab 12.1. [GitLab Pages' Let's Encrypt integration](../../user/project/pages/custom_domains_ssl_tls_certification/lets_encrypt_integration.md) allows users to add Let's Encrypt SSL certificates for GitLab Pages sites served under a custom domain. To enable it, you'll need to: 1. Choose an email on which you will receive notifications about expiring domains. 1. Navigate to your instance's **Admin Area > Settings > Preferences** and expand **Pages** settings. 1. Enter the email for receiving notifications and accept Let's Encrypt's Terms of Service as shown below. 1. Click **Save changes**. ![Let's Encrypt settings](img/lets_encrypt_integration_v12_1.png) ### Access control > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/33422) in GitLab 11.5. GitLab Pages access control can be configured per-project, and allows access to a Pages site to be controlled based on a user's membership to that project. Access control works by registering the Pages daemon as an OAuth application with GitLab. Whenever a request to access a private Pages site is made by an unauthenticated user, the Pages daemon redirects the user to GitLab. If authentication is successful, the user is redirected back to Pages with a token, which is persisted in a cookie. The cookies are signed with a secret key, so tampering can be detected. Each request to view a resource in a private site is authenticated by Pages using that token. For each request it receives, it makes a request to the GitLab API to check that the user is authorized to read that site. Pages access control is disabled by default. To enable it: 1. Enable it in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['access_control'] = true ``` 1. [Reconfigure GitLab][reconfigure]. 1. Users can now configure it in their [projects' settings](../../user/project/pages/introduction.md#gitlab-pages-access-control-core). ### Running behind a proxy Like the rest of GitLab, Pages can be used in those environments where external internet connectivity is gated by a proxy. In order to use a proxy for GitLab pages: 1. Configure in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['http_proxy'] = 'http://example:8080' ``` 1. [Reconfigure GitLab][reconfigure] for the changes to take effect. ## Activate verbose logging for daemon Verbose logging was [introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/2533) in Omnibus GitLab 11.1. Follow the steps below to configure verbose logging of GitLab Pages daemon. 1. By default the daemon only logs with `INFO` level. If you wish to make it log events with level `DEBUG` you must configure this in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['log_verbose'] = true ``` 1. [Reconfigure GitLab][reconfigure]. ## Change storage path Follow the steps below to change the default path where GitLab Pages' contents are stored. 1. Pages are stored by default in `/var/opt/gitlab/gitlab-rails/shared/pages`. If you wish to store them in another location you must set it up in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_rails['pages_path'] = "/mnt/storage/pages" ``` 1. [Reconfigure GitLab][reconfigure]. ## Configure listener for reverse proxy requests Follow the steps below to configure the proxy listener of GitLab Pages. [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/merge_requests/2533) in Omnibus GitLab 11.1. 1. By default the listener is configured to listen for requests on `localhost:8090`. If you wish to disable it you must configure this in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['listen_proxy'] = nil ``` If you wish to make it listen on a different port you must configure this also in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['listen_proxy'] = "localhost:10080" ``` 1. [Reconfigure GitLab][reconfigure]. ## Set maximum pages size The maximum size of the unpacked archive per project can be configured in the Admin area under the Application settings in the **Maximum size of pages (MB)**. The default is 100MB. ## Running GitLab Pages on a separate server You can run the GitLab Pages daemon on a separate server in order to decrease the load on your main application server. To configure GitLab Pages on a separate server: 1. Set up a new server. This will become the **Pages server**. 1. Create an NFS share on the new server and configure this share to allow access from your main **GitLab server**. For this example, we use the default GitLab Pages folder `/var/opt/gitlab/gitlab-rails/shared/pages` as the shared folder on the new server and we will mount it to `/mnt/pages` on the **GitLab server**. 1. On the **Pages server**, install Omnibus GitLab and modify `/etc/gitlab/gitlab.rb` to include: ```ruby external_url 'http://' pages_external_url "http://" postgresql['enable'] = false redis['enable'] = false prometheus['enable'] = false unicorn['enable'] = false sidekiq['enable'] = false gitlab_workhorse['enable'] = false gitaly['enable'] = false alertmanager['enable'] = false node_exporter['enable'] = false gitlab_rails['auto_migrate'] = false ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. 1. On the **GitLab server**, make the following changes to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['enable'] = false pages_external_url "http://" gitlab_rails['pages_path'] = "/mnt/pages" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. It is possible to run GitLab Pages on multiple servers if you wish to distribute the load. You can do this through standard load balancing practices such as configuring your DNS server to return multiple IPs for your Pages server, configuring a load balancer to work at the IP level, and so on. If you wish to set up GitLab Pages on multiple servers, perform the above procedure for each Pages server. ### Access control when running GitLab Pages on a separate server If you are [running GitLab Pages on a separate server](#running-gitlab-pages-on-a-separate-server), then you must use the following procedure to configure [access control](#access-control): 1. On the **GitLab server**, add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['enable'] = true gitlab_pages['access_control'] = true ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. The `gitlab-secrets.json` file is now updated with the new configuration. DANGER: **Danger:** The `gitlab-secrets.json` file contains secrets that control database encryption. Do not edit or replace this file on the **GitLab server** or you might experience permanent data loss. Make a backup copy of this file before proceeding, as explained in the following steps. 1. Create a backup of the secrets file on the **GitLab server**: ```shell cp /etc/gitlab/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json.bak ``` 1. Create a backup of the secrets file on the **Pages server**: ```shell cp /etc/gitlab/gitlab-secrets.json /etc/gitlab/gitlab-secrets.json.bak ``` 1. Disable Pages on the **GitLab server** by setting the following in `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['enable'] = false ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. 1. Copy the `/etc/gitlab/gitlab-secrets.json` file from the **GitLab server** to the **Pages server**. 1. On your **Pages server**, add the following to `/etc/gitlab/gitlab.rb`: ```ruby gitlab_pages['gitlab_server'] = "https://" ``` 1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect. ## Backup GitLab Pages are part of the [regular backup][backup], so there is no separate backup to configure. ## Security You should strongly consider running GitLab Pages under a different hostname than GitLab to prevent XSS attacks. [backup]: ../../raketasks/backup_restore.md [ce-14605]: https://gitlab.com/gitlab-org/gitlab-foss/issues/14605 [ee-80]: https://gitlab.com/gitlab-org/gitlab/merge_requests/80 [ee-173]: https://gitlab.com/gitlab-org/gitlab/merge_requests/173 [gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages [NGINX configs]: https://gitlab.com/gitlab-org/gitlab/tree/8-5-stable-ee/lib/support/nginx [pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md [pages-userguide]: ../../user/project/pages/index.md [reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure [restart]: ../restart_gitlab.md#installations-from-source [gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4 [video-admin]: https://youtu.be/dD8c7WNcc6s