提交 965a16c0 编写于 作者: A armink

1、【更新】基于RTT的Keil Demo工程配置。

Signed-off-by: Narmink <armink.ztl@gmail.com>
上级 531e687b
......@@ -345,7 +345,7 @@
<MiscControls></MiscControls>
<Define>USE_STDPERIPH_DRIVER,STM32F10X_HD,USE_FULL_ASSERT</Define>
<Undefine></Undefine>
<IncludePath>..\app\inc;..\components\rtt_uart;..\components\others;..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\Libraries\CMSIS_RVMDK\CM3\DeviceSupport\ST\STM32F10x;..\RT-Thread-1.2.2\include;..\RT-Thread-1.2.2\components\drivers\include;..\RT-Thread-1.2.2\components\drivers\include\drivers;..\RT-Thread-1.2.2\components\finsh;..\..\..\..\flash\inc</IncludePath>
<IncludePath>..\app\inc;..\components\rtt_uart;..\components\others;..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\Libraries\CMSIS_RVMDK\CM3\DeviceSupport\ST\STM32F10x;..\RT-Thread-1.2.2\include;..\RT-Thread-1.2.2\components\drivers\include;..\RT-Thread-1.2.2\components\drivers\include\drivers;..\RT-Thread-1.2.2\components\finsh;..\..\..\..\easyflash\inc</IncludePath>
</VariousControls>
</Cads>
<Aads>
......@@ -463,32 +463,32 @@
<File>
<FileName>flash_port.c</FileName>
<FileType>1</FileType>
<FilePath>..\components\flash\port\flash_port.c</FilePath>
<FilePath>..\components\easyflash\port\flash_port.c</FilePath>
</File>
<File>
<FileName>flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\flash\src\flash.c</FilePath>
<FilePath>..\..\..\..\easyflash\src\flash.c</FilePath>
</File>
<File>
<FileName>flash_env.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\flash\src\flash_env.c</FilePath>
<FilePath>..\..\..\..\easyflash\src\flash_env.c</FilePath>
</File>
<File>
<FileName>flash_env_wl.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\flash\src\flash_env_wl.c</FilePath>
<FilePath>..\..\..\..\easyflash\src\flash_env_wl.c</FilePath>
</File>
<File>
<FileName>flash_iap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\flash\src\flash_iap.c</FilePath>
<FilePath>..\..\..\..\easyflash\src\flash_iap.c</FilePath>
</File>
<File>
<FileName>flash_utils.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\..\flash\src\flash_utils.c</FilePath>
<FilePath>..\..\..\..\easyflash\src\flash_utils.c</FilePath>
</File>
</Files>
</Group>
......
......@@ -345,7 +345,7 @@
<MiscControls></MiscControls>
<Define>USE_STDPERIPH_DRIVER,STM32F10X_HD,USE_FULL_ASSERT</Define>
<Undefine></Undefine>
<IncludePath>..\app\inc;..\components\rtt_uart;..\components\others;..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\Libraries\CMSIS_RVMDK\CM3\DeviceSupport\ST\STM32F10x;..\RT-Thread-1.2.2\include;..\RT-Thread-1.2.2\components\drivers\include;..\RT-Thread-1.2.2\components\drivers\include\drivers;..\RT-Thread-1.2.2\components\finsh;..\..\..\flash\inc</IncludePath>
<IncludePath>..\app\inc;..\components\rtt_uart;..\components\others;..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\Libraries\CMSIS_RVMDK\CM3\DeviceSupport\ST\STM32F10x;..\RT-Thread-1.2.2\include;..\RT-Thread-1.2.2\components\drivers\include;..\RT-Thread-1.2.2\components\drivers\include\drivers;..\RT-Thread-1.2.2\components\finsh;..\..\..\..\flash\inc</IncludePath>
</VariousControls>
</Cads>
<Aads>
......@@ -468,27 +468,27 @@
<File>
<FileName>flash.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\flash\src\flash.c</FilePath>
<FilePath>..\..\..\..\flash\src\flash.c</FilePath>
</File>
<File>
<FileName>flash_env.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\flash\src\flash_env.c</FilePath>
<FilePath>..\..\..\..\flash\src\flash_env.c</FilePath>
</File>
<File>
<FileName>flash_env_wl.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\flash\src\flash_env_wl.c</FilePath>
<FilePath>..\..\..\..\flash\src\flash_env_wl.c</FilePath>
</File>
<File>
<FileName>flash_iap.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\flash\src\flash_iap.c</FilePath>
<FilePath>..\..\..\..\flash\src\flash_iap.c</FilePath>
</File>
<File>
<FileName>flash_utils.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\flash\src\flash_utils.c</FilePath>
<FilePath>..\..\..\..\flash\src\flash_utils.c</FilePath>
</File>
</Files>
</Group>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册