diff --git a/.travis.yml b/.travis.yml index 3656d499ebcfede327589ad30a913e949a29944c..f7ecc85ca749d67c94ff14503c4a35a325914747 100644 --- a/.travis.yml +++ b/.travis.yml @@ -138,6 +138,7 @@ env: - RTT_BSP='xplorer4330/M4' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='at32/at32f403a-start' RTT_TOOL_CHAIN='sourcery-arm' - RTT_BSP='at32/at32f407-start' RTT_TOOL_CHAIN='sourcery-arm' + - RTT_BSP='smartfusion2' RTT_TOOL_CHAIN='sourcery-arm' stage: compile script: diff --git a/bsp/smartfusion2/CMSIS/SConscript b/bsp/smartfusion2/CMSIS/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..653a3b7fc68d9f6e977f60cd30ad4f9a72e3473f --- /dev/null +++ b/bsp/smartfusion2/CMSIS/SConscript @@ -0,0 +1,17 @@ +from building import * +import rtconfig + +cwd = GetCurrentDir() +src = Glob('*.c') + +if rtconfig.CROSS_TOOL == 'gcc': + src += ['startup_gcc/startup_m2sxxx.S'] + +elif rtconfig.CROSS_TOOL == 'keil': + src += ['startup_arm/startup_m2sxxx.s'] + +CPPPATH = [cwd] + +group = DefineGroup('CMSIS', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/smartfusion2/CMSIS/core_cm3.c b/bsp/smartfusion2/CMSIS/core_cm3.c new file mode 100644 index 0000000000000000000000000000000000000000..b8a357bf2836226f7b5cd96cbdb42f6d41a25e1e --- /dev/null +++ b/bsp/smartfusion2/CMSIS/core_cm3.c @@ -0,0 +1,810 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ +/******************************************************************************* + * Microsemi SoC Products Group SVN revision number for the purpose of tracking + * changes done to original file supplied by ARM: + * SVN $Revision: 6671 $ + * SVN $Date: 2014-07-04 12:15:22 +0100 (Fri, 04 Jul 2014) $ + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +#if (__VER__ < 6020000) +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} +#endif + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +#if (__VER__ < 6020000) +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} +#endif + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +#if (__VER__ < 6020000) +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} +#endif + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +#if (__VER__ < 6020000) +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} +#endif + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +#if (__VER__ < 6020000) +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} +#endif + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +#if (__VER__ < 6020000) +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} +#endif + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +#if (__VER__ < 6020000) +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} +#endif + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +#if (__VER__ < 6020000) +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} +#endif + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +#if (__VER__ < 6020000) +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} +#endif + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +#if (__VER__ < 6020000) +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} +#endif + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/bsp/smartfusion2/CMSIS/core_cm3.h b/bsp/smartfusion2/CMSIS/core_cm3.h new file mode 100644 index 0000000000000000000000000000000000000000..6c53c0f4688c55f055170f315606b27e3307fda9 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/core_cm3.h @@ -0,0 +1,1844 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ +/******************************************************************************* + * Microsemi SoC Products Group SVN revision number for the purpose of tracking + * changes done to original file supplied by ARM: + * SVN $Revision: 4048 $ + * SVN $Date: 2011-12-06 16:05:56 +0000 (Tue, 06 Dec 2011) $ + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +#if (__VER__ < 6020000) +extern uint32_t __get_PSP(void); +#endif + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +#if (__VER__ < 6020000) +extern void __set_PSP(uint32_t topOfProcStack); +#endif + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +#if (__VER__ < 6020000) +extern uint32_t __get_MSP(void); +#endif + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +#if (__VER__ < 6020000) +extern void __set_MSP(uint32_t topOfMainStack); +#endif + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +#if (__VER__ < 6020000) +extern uint32_t __REV16(uint16_t value); +#endif + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +#if (__VER__ < 6020000) +extern uint32_t __RBIT(uint32_t value); +#endif + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +#if (__VER__ < 6020000) +extern uint8_t __LDREXB(uint8_t *addr); +#endif + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +#if (__VER__ < 6020000) +extern uint16_t __LDREXH(uint16_t *addr); +#endif + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +#if (__VER__ < 6020000) +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); +#endif + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +#if (__VER__ < 6020000) +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); +#endif + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP(void) { __ASM volatile ("nop"); } +static __INLINE void __WFI(void) { __ASM volatile ("wfi"); } +static __INLINE void __WFE(void) { __ASM volatile ("wfe"); } +static __INLINE void __SEV(void) { __ASM volatile ("sev"); } +static __INLINE void __ISB(void) { __ASM volatile ("isb"); } +static __INLINE void __DSB(void) { __ASM volatile ("dsb"); } +static __INLINE void __DMB(void) { __ASM volatile ("dmb"); } +static __INLINE void __CLREX(void) { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/bsp/smartfusion2/CMSIS/hw_reg_io.h b/bsp/smartfusion2/CMSIS/hw_reg_io.h new file mode 100644 index 0000000000000000000000000000000000000000..583099b2937ae80780946c4cf5180a6031458da2 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/hw_reg_io.h @@ -0,0 +1,113 @@ +/******************************************************************************* + * (c) Copyright 2011-2013 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 Cortex Microcontroller Software Interface - Peripheral + * Access Layer. + * + * This file provides interfaces to perform register and register bit level + * read / write operations. These interfaces support bit-banding in case of + * Cortex-M3 CPU. + * + * SVN $Revision: 5263 $ + * SVN $Date: 2013-03-21 14:44:58 +0000 (Thu, 21 Mar 2013) $ + */ + +#ifndef HW_REG_IO_H_ +#define HW_REG_IO_H_ + +#include /* Include standard types */ + +#if defined ( __CC_ARM ) + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __INLINE inline /*!< inline keyword for GNU Compiler */ +#endif + +/***************************************************************************************** + * Definitions for register access + */ + +#define HW_REG(addr) (*((volatile uint32_t *) (addr))) + +static __INLINE void write_reg32(volatile uint32_t * reg, uint32_t val) +{ + HW_REG(reg) = val; +} +static __INLINE void write_reg16(volatile uint16_t * reg, uint16_t val) +{ + HW_REG(reg) = val; +} +static __INLINE void write_reg8(volatile uint8_t * reg, uint8_t val) +{ + HW_REG(reg) = val; +} + +static __INLINE uint32_t read_reg32(volatile uint32_t * reg) +{ + return ( HW_REG(reg) ); +} +static __INLINE uint16_t read_reg16(volatile uint16_t * reg) +{ + return ( HW_REG(reg) ); +} +static __INLINE uint8_t read_reg8(volatile uint8_t * reg) +{ + return ( HW_REG(reg) ); +} +/***************************************************************************************** + * Definitions for register bits access using bit-band aliases for Cortex-M3 + */ +#define BITBAND(addr,bitnum) (((uint32_t)addr & 0xF0000000)+0x02000000+(((uint32_t)addr & 0xFFFFF)<<5)+(bitnum<<2)) +#define HW_REG_BIT(reg,bitnum) (*(volatile unsigned int *)((BITBAND(reg,bitnum)))) + +/***************************************************************************************** + * Functions to set a bit field in Cortex-M3 + */ +static __INLINE void set_bit_reg32(volatile uint32_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x1; +} +static __INLINE void set_bit_reg16(volatile uint16_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x1; +} +static __INLINE void set_bit_reg8(volatile uint8_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x1; +} +/***************************************************************************************** + * Functions to clear a bit field in Cortex-M3 + */ +static __INLINE void clear_bit_reg32(volatile uint32_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x0; +} +static __INLINE void clear_bit_reg16(volatile uint16_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x0; +} +static __INLINE void clear_bit_reg8(volatile uint8_t * reg, uint8_t bit) +{ + HW_REG_BIT(reg,bit) = 0x0; +} +/***************************************************************************************** + * Functions to read a bit field in Cortex-M3 + */ +static __INLINE uint8_t read_bit_reg32(volatile uint32_t * reg, uint8_t bit) +{ + return (HW_REG_BIT(reg,bit)); +} +static __INLINE uint8_t read_bit_reg16(volatile uint16_t * reg, uint8_t bit) +{ + return (HW_REG_BIT(reg,bit)); +} +static __INLINE uint8_t read_bit_reg8(volatile uint8_t * reg, uint8_t bit) +{ + return (HW_REG_BIT(reg,bit)); +} + +#endif /* HW_REG_IO_H_ */ diff --git a/bsp/smartfusion2/CMSIS/m2sxxx.h b/bsp/smartfusion2/CMSIS/m2sxxx.h new file mode 100644 index 0000000000000000000000000000000000000000..9404959bd7b9cf3b499a45115790da1ca8b6a63f --- /dev/null +++ b/bsp/smartfusion2/CMSIS/m2sxxx.h @@ -0,0 +1,2826 @@ +/******************************************************************************* + * (c) Copyright 2010-2013 Microsemi SoC Products Group. All rights reserved. + * + * Microsemi SmartFusion2 Cortex Microcontroller Software Interface - Peripheral + * Access Layer. + * + * This file describes the interrupt assignment and peripheral registers for + * the SmartFusion2 familly of devices. + * + * SVN $Revision: 6526 $ + * SVN $Date: 2014-06-05 16:07:40 +0100 (Thu, 05 Jun 2014) $ + */ +#ifndef __SMARTFUSION2_CMSIS_PAL_H__ +#define __SMARTFUSION2_CMSIS_PAL_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * ========================================================================== + * ---------- Interrupt Number Definition ----------------------------------- + * ========================================================================== + */ + +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers *********************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt - Watchdog timeout interrupt*/ + HardFault_IRQn = -13, /*!< 2 Hard Fault Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** SmartFusion2 specific Interrupt Numbers *********************************************************/ + WdogWakeup_IRQn = 0, /*!< WatchDog wakeup interrupt */ + RTC_Wakeup_IRQn = 1, /*!< RTC wakeup interrupt */ + SPI0_IRQn = 2, /*!< SPI0 interrupt */ + SPI1_IRQn = 3, /*!< SPI1 interrupt */ + I2C0_IRQn = 4, /*!< I2C0 interrupt */ + I2C0_SMBAlert_IRQn = 5, /*!< I2C0 SMBus Alert interrupt */ + I2C0_SMBus_IRQn = 6, /*!< I2C0 SMBus Suspend interrupt */ + I2C1_IRQn = 7, /*!< I2C1 interrupt */ + I2C1_SMBAlert_IRQn = 8, /*!< I2C1 SMBus Alert interrupt */ + I2C1_SMBus_IRQn = 9, /*!< I2C1 SMBus Suspend interrupt */ + UART0_IRQn = 10, /*!< UART0 interrupt */ + UART1_IRQn = 11, /*!< UART1 interrupt */ + EthernetMAC_IRQn = 12, /*!< Ethernet MAC interrupt */ + DMA_IRQn = 13, /*!< Peripheral DMA interrupt */ + Timer1_IRQn = 14, /*!< Timer1 interrupt */ + Timer2_IRQn = 15, /*!< Timer2 interrupt */ + CAN_IRQn = 16, /*!< CAN controller interrupt */ + ENVM0_IRQn = 17, /*!< eNVM0 operation completion interrupt */ + ENVM1_IRQn = 18, /*!< eNVM1 operation completion interrupt */ + ComBlk_IRQn = 19, /*!< COM block interrupt */ + USB_IRQn = 20, /*!< USB interrupt */ + USB_DMA_IRQn = 21, /*!< USB DMA interrupt */ + PLL_Lock_IRQn = 22, /*!< PLL lock interrupt */ + PLL_LockLost_IRQn = 23, /*!< PLL loss of lock interrupt */ + CommSwitchError_IR = 24, /*!< Communications Switch error interrupt */ + CacheError_IRQn = 25, /*!< Cache error interrupt */ + DDR_IRQn = 26, /*!< DDR controller interrupt */ + HPDMA_Complete_IRQn = 27, /*!< High speed DMA transfer complete interrupt */ + HPDMA_Error_IRQn = 28, /*!< High speed DMA transfer error interrupt */ + ECC_Error_IRQn = 29, /*!< ECC error detected */ + MDDR_IOCalib_IRQn = 30, /*!< MDDR Calibration finished interrupt */ + FAB_PLL_Lock_IRQn = 31, /*!< MSSDDR Fabric PLL lock interrupt */ + FAB_PLL_LockLost_IRQn = 32, /*!< MSSDDR Fabric PLL lock lost interrupt */ + FIC64_IRQn = 33, /*!< FIC64 interrupt */ + FabricIrq0_IRQn = 34, /*!< FPGA fabric interrupt 0 */ + FabricIrq1_IRQn = 35, /*!< FPGA fabric interrupt 1 */ + FabricIrq2_IRQn = 36, /*!< FPGA fabric interrupt 2 */ + FabricIrq3_IRQn = 37, /*!< FPGA fabric interrupt 3 */ + FabricIrq4_IRQn = 38, /*!< FPGA fabric interrupt 4 */ + FabricIrq5_IRQn = 39, /*!< FPGA fabric interrupt 5 */ + FabricIrq6_IRQn = 40, /*!< FPGA fabric interrupt 6 */ + FabricIrq7_IRQn = 41, /*!< FPGA fabric interrupt 7 */ + FabricIrq8_IRQn = 42, /*!< FPGA fabric interrupt 8 */ + FabricIrq9_IRQn = 43, /*!< FPGA fabric interrupt 9 */ + FabricIrq10_IRQn = 44, /*!< FPGA fabric interrupt 10 */ + FabricIrq11_IRQn = 45, /*!< FPGA fabric interrupt 11 */ + FabricIrq12_IRQn = 46, /*!< FPGA fabric interrupt 12 */ + FabricIrq13_IRQn = 47, /*!< FPGA fabric interrupt 13 */ + FabricIrq14_IRQn = 48, /*!< FPGA fabric interrupt 14 */ + FabricIrq15_IRQn = 49, /*!< FPGA fabric interrupt 15 */ + GPIO0_IRQn = 50, /*!< GPIO 0 interrupt */ + GPIO1_IRQn = 51, /*!< GPIO 1 interrupt */ + GPIO2_IRQn = 52, /*!< GPIO 2 interrupt */ + GPIO3_IRQn = 53, /*!< GPIO 3 interrupt */ + GPIO4_IRQn = 54, /*!< GPIO 4 interrupt */ + GPIO5_IRQn = 55, /*!< GPIO 5 interrupt */ + GPIO6_IRQn = 56, /*!< GPIO 6 interrupt */ + GPIO7_IRQn = 57, /*!< GPIO 7 interrupt */ + GPIO8_IRQn = 58, /*!< GPIO 8 interrupt */ + GPIO9_IRQn = 59, /*!< GPIO 9 interrupt */ + GPIO10_IRQn = 60, /*!< GPIO 10 interrupt */ + GPIO11_IRQn = 61, /*!< GPIO 11 interrupt */ + GPIO12_IRQn = 62, /*!< GPIO 12 interrupt */ + GPIO13_IRQn = 63, /*!< GPIO 13 interrupt */ + GPIO14_IRQn = 64, /*!< GPIO 14 interrupt */ + GPIO15_IRQn = 65, /*!< GPIO 15 interrupt */ + GPIO16_IRQn = 66, /*!< GPIO 16 interrupt */ + GPIO17_IRQn = 67, /*!< GPIO 17 interrupt */ + GPIO18_IRQn = 68, /*!< GPIO 18 interrupt */ + GPIO19_IRQn = 69, /*!< GPIO 19 interrupt */ + GPIO20_IRQn = 70, /*!< GPIO 20 interrupt */ + GPIO21_IRQn = 71, /*!< GPIO 21 interrupt */ + GPIO22_IRQn = 72, /*!< GPIO 22 interrupt */ + GPIO23_IRQn = 73, /*!< GPIO 23 interrupt */ + GPIO24_IRQn = 74, /*!< GPIO 24 interrupt */ + GPIO25_IRQn = 75, /*!< GPIO 25 interrupt */ + GPIO26_IRQn = 76, /*!< GPIO 26 interrupt */ + GPIO27_IRQn = 77, /*!< GPIO 27 interrupt */ + GPIO28_IRQn = 78, /*!< GPIO 28 interrupt */ + GPIO29_IRQn = 79, /*!< GPIO 29 interrupt */ + GPIO30_IRQn = 80, /*!< GPIO 30 interrupt */ + GPIO31_IRQn = 81 /*!< GPIO 31 interrupt */ +} IRQn_Type; + +/* + * ========================================================================== + * ----------- Processor and Core Peripheral Section ------------------------ + * ========================================================================== + */ +#define __CM3_REV 0x0201 /*!< Core revision r2p1 */ +#define __MPU_PRESENT 1 /*!< MPU present or not */ +#define __NVIC_PRIO_BITS 4 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +#include /* Cortex-M3 processor and core peripherals */ + +/******************************************************************************/ +/* Device Specific Peripheral registers structures */ +/******************************************************************************/ +#if defined ( __CC_ARM ) + /* Enable anonymous unions when building using Keil-MDK */ + #pragma anon_unions +#endif + +/*----------------------------------------------------------------------------*/ +/*----------------------------------- UART -----------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + union + { + __I uint8_t RBR; + __O uint8_t THR; + __IO uint8_t DLR; + uint32_t RESERVED0; + }; + + union + { + __IO uint8_t DMR; + __IO uint8_t IER; + uint32_t RESERVED1; + }; + + union + { + __IO uint8_t IIR; + __IO uint8_t FCR; + uint32_t RESERVED2; + }; + + __IO uint8_t LCR; + uint8_t RESERVED3[3]; + + __IO uint8_t MCR; + uint8_t RESERVED4[3]; + + __I uint8_t LSR; + uint8_t RESERVED5[3]; + + __I uint8_t MSR; + uint8_t RESERVED6[3]; + + __IO uint8_t SR; + uint8_t RESERVED7[7]; + + __IO uint8_t IEM; + uint8_t RESERVED8[3]; + + __IO uint8_t IIM; + uint8_t RESERVED9[7]; + + __IO uint8_t MM0; + uint8_t RESERVED10[3]; + + __IO uint8_t MM1; + uint8_t RESERVED11[3]; + + __IO uint8_t MM2; + uint8_t RESERVED12[3]; + + __IO uint8_t DFR; + uint8_t RESERVED13[7]; + + __IO uint8_t GFR; + uint8_t RESERVED14[3]; + + __IO uint8_t TTG; + uint8_t RESERVED15[3]; + + __IO uint8_t RTO; + uint8_t RESERVED16[3]; + + __IO uint8_t ADR; + uint8_t RESERVED17[3]; + +} UART_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*----------------------------------- I2C ------------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint8_t CTRL; + uint8_t RESERVED0; + uint16_t RESERVED1; + uint8_t STATUS; + uint8_t RESERVED2; + uint16_t RESERVED3; + __IO uint8_t DATA; + uint8_t RESERVED4; + uint16_t RESERVED5; + __IO uint8_t ADDR; + uint8_t RESERVED6; + uint16_t RESERVED7; + __IO uint8_t SMBUS; + uint8_t RESERVED8; + uint16_t RESERVED9; + __IO uint8_t FREQ; + uint8_t RESERVED10; + uint16_t RESERVED11; + __IO uint8_t GLITCHREG; + uint8_t RESERVED12; + uint16_t RESERVED13; + __IO uint8_t SLAVE1_ADDR; + uint8_t RESERVED14; + uint16_t RESERVED15; +} I2C_TypeDef; + +/*------------------------------------------------------------------------------ + * I2C bit band + */ +typedef struct +{ + __IO uint32_t CTRL_CR0; + __IO uint32_t CTRL_CR1; + __IO uint32_t CTRL_AA; + __IO uint32_t CTRL_SI; + __IO uint32_t CTRL_STO; + __IO uint32_t CTRL_STA; + __IO uint32_t CTRL_ENS1; + __IO uint32_t CTRL_CR2; + uint32_t RESERVED0[56]; + __IO uint32_t DATA_DIR; + uint32_t RESERVED1[31]; + __IO uint32_t ADDR_GC; +} I2C_BitBand_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*----------------------------------- SPI ------------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t CONTROL; + __IO uint32_t TXRXDF_SIZE; + __I uint32_t STATUS; + __O uint32_t INT_CLEAR; + __I uint32_t RX_DATA; + __O uint32_t TX_DATA; + __IO uint32_t CLK_GEN; + __IO uint32_t SLAVE_SELECT; + __I uint32_t MIS; + __I uint32_t RIS; + __IO uint32_t CONTROL2; + __IO uint32_t COMMAND; + __IO uint32_t PKTSIZE; + __IO uint32_t CMDSIZE; + __IO uint32_t HWSTATUS; + __IO uint32_t STAT8; + __IO uint32_t CTRL0; + __IO uint32_t CTRL1; + __IO uint32_t CTRL2; + __IO uint32_t CTRL3; +} SPI_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*----------------------------------- GPIO -----------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t GPIO_0_CFG; + __IO uint32_t GPIO_1_CFG; + __IO uint32_t GPIO_2_CFG; + __IO uint32_t GPIO_3_CFG; + __IO uint32_t GPIO_4_CFG; + __IO uint32_t GPIO_5_CFG; + __IO uint32_t GPIO_6_CFG; + __IO uint32_t GPIO_7_CFG; + __IO uint32_t GPIO_8_CFG; + __IO uint32_t GPIO_9_CFG; + __IO uint32_t GPIO_10_CFG; + __IO uint32_t GPIO_11_CFG; + __IO uint32_t GPIO_12_CFG; + __IO uint32_t GPIO_13_CFG; + __IO uint32_t GPIO_14_CFG; + __IO uint32_t GPIO_15_CFG; + __IO uint32_t GPIO_16_CFG; + __IO uint32_t GPIO_17_CFG; + __IO uint32_t GPIO_18_CFG; + __IO uint32_t GPIO_19_CFG; + __IO uint32_t GPIO_20_CFG; + __IO uint32_t GPIO_21_CFG; + __IO uint32_t GPIO_22_CFG; + __IO uint32_t GPIO_23_CFG; + __IO uint32_t GPIO_24_CFG; + __IO uint32_t GPIO_25_CFG; + __IO uint32_t GPIO_26_CFG; + __IO uint32_t GPIO_27_CFG; + __IO uint32_t GPIO_28_CFG; + __IO uint32_t GPIO_29_CFG; + __IO uint32_t GPIO_30_CFG; + __IO uint32_t GPIO_31_CFG; + __IO uint32_t GPIO_IRQ; + __I uint32_t GPIO_IN; + __IO uint32_t GPIO_OUT; +} GPIO_TypeDef; + +/*------------------------------------------------------------------------------ + * GPIO bit band + */ +typedef struct +{ + __IO uint32_t GPIO_0_CFG[32]; + __IO uint32_t GPIO_1_CFG[32]; + __IO uint32_t GPIO_2_CFG[32]; + __IO uint32_t GPIO_3_CFG[32]; + __IO uint32_t GPIO_4_CFG[32]; + __IO uint32_t GPIO_5_CFG[32]; + __IO uint32_t GPIO_6_CFG[32]; + __IO uint32_t GPIO_7_CFG[32]; + __IO uint32_t GPIO_8_CFG[32]; + __IO uint32_t GPIO_9_CFG[32]; + __IO uint32_t GPIO_10_CFG[32]; + __IO uint32_t GPIO_11_CFG[32]; + __IO uint32_t GPIO_12_CFG[32]; + __IO uint32_t GPIO_13_CFG[32]; + __IO uint32_t GPIO_14_CFG[32]; + __IO uint32_t GPIO_15_CFG[32]; + __IO uint32_t GPIO_16_CFG[32]; + __IO uint32_t GPIO_17_CFG[32]; + __IO uint32_t GPIO_18_CFG[32]; + __IO uint32_t GPIO_19_CFG[32]; + __IO uint32_t GPIO_20_CFG[32]; + __IO uint32_t GPIO_21_CFG[32]; + __IO uint32_t GPIO_22_CFG[32]; + __IO uint32_t GPIO_23_CFG[32]; + __IO uint32_t GPIO_24_CFG[32]; + __IO uint32_t GPIO_25_CFG[32]; + __IO uint32_t GPIO_26_CFG[32]; + __IO uint32_t GPIO_27_CFG[32]; + __IO uint32_t GPIO_28_CFG[32]; + __IO uint32_t GPIO_29_CFG[32]; + __IO uint32_t GPIO_30_CFG[32]; + __IO uint32_t GPIO_31_CFG[32]; + __IO uint32_t GPIO_IRQ[32]; + __I uint32_t GPIO_IN[32]; + __IO uint32_t GPIO_OUT[32]; +} GPIO_BitBand_TypeDef; + + +/*----------------------------------------------------------------------------*/ +/*--------------------------------- HPDMA ------------------------------------*/ +/*----------------------------------------------------------------------------*/ + +typedef struct +{ + __IO uint32_t HPDMASAR_REG ; + __IO uint32_t HPDMADAR_REG ; + __IO uint32_t HPDMACR_REG ; + __I uint32_t HPDMASR_REG ; + __I uint32_t HPDMAPTR_REG ; +}HPDMA_Descriptor_TypeDef; + +typedef struct +{ + __I uint32_t HPDMAEDR_REG ; + HPDMA_Descriptor_TypeDef Descriptor[4] ; + __O uint32_t HPDMAICR_REG ; + __I uint32_t HPDMADR_REG ; +} HPDMA_TypeDef; + +typedef struct +{ + uint32_t RESERVED0[64]; + __IO uint32_t HPDMACR_XFR_SIZE[16] ; + __IO uint32_t HPDMACR_DCP_VALID ; + __IO uint32_t HPDMACR_DCP_XFR_DIR ; + __IO uint32_t HPDMACR_DCP_CLR ; + __IO uint32_t HPDMACR_DCP_PAUSE ; + __IO uint32_t HPDMACR_XFR_CMP_INT ; + __IO uint32_t HPDMACR_XFR_ERR_INT ; + __IO uint32_t HPDMACR_NON_WORD_INT ; + uint32_t RESERVED1[9]; + + __I uint32_t HPDMASR_DCP_ACTIVE ; + __I uint32_t HPDMASR_DCP_CMPLET ; + __I uint32_t HPDMASR_DCP_SERR ; + __I uint32_t HPDMASR_DCP_DERR ; + uint32_t RESERVED2[60] ; +}HPDMA_Descriptor_BitBand_TypeDef; + +/*------------------------------------------------------------------------------ + * HPDMA bit band + */ +typedef struct +{ + __I uint32_t HPDMAEDR_DCP_EMPTY[4] ; + __I uint32_t HPDMAEDR_DCP_CMPLET[4] ; + __I uint32_t HPDMAEDR_DCP_ERR[4] ; + __I uint32_t HPDMAEDR_DCP_NON_WORD_ERR[4] ; + uint32_t RESERVED0[16] ; + + HPDMA_Descriptor_BitBand_TypeDef Descriptor[4]; + + __O uint32_t HPDMAICR_CLR_XFR_INT[4] ; + __O uint32_t HPDMAICR_NON_WORD_INT[4] ; + uint32_t RESERVED1[16] ; + + __I uint32_t HPDMADR_BFR_EMPTY ; + __I uint32_t HPDMADR_BFR_FULL ; + __I uint32_t HPDMADR_BFR_RD_PNTR[3] ; + __I uint32_t HPDMADR_BFR_WR_PNTR [3] ; + __I uint32_t HPDMADR_AHM1_CST_DBG[4] ; + __I uint32_t HPDMADR_AHM2_CST_DBG[4] ; + __I uint32_t HPDMADR_WBC_CST_DBG[3] ; + __I uint32_t HPDMADR_RBC_CST_DBG[3] ; + __I uint32_t HPDMADR_RRBN_CST_DBG[4] ; + __I uint32_t HPDMADR_DMA_CST_DBG[4] ; + + uint32_t RESERVED2[4] ; +}HPDMA_BitBand_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*----------------------------------- RTC ------------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t CONTROL_REG ; + __IO uint32_t MODE_REG ; + __IO uint32_t PRESCALER_REG ; + __IO uint32_t ALARM_LOWER_REG ; + __IO uint32_t ALARM_UPPER_REG ; + __IO uint32_t COMPARE_LOWER_REG ; + __IO uint32_t COMPARE_UPPER_REG ; + uint32_t RESERVED0 ; + __IO uint32_t DATE_TIME_LOWER_REG ; + __IO uint32_t DATE_TIME_UPPER_REG ; + + uint32_t RESERVED1[2] ; + __IO uint32_t SECONDS_REG ; + __IO uint32_t MINUTES_REG ; + __IO uint32_t HOURS_REG ; + __IO uint32_t DAY_REG ; + __IO uint32_t MONTH_REG ; + __IO uint32_t YEAR_REG ; + __IO uint32_t WEEKDAY_REG ; + __IO uint32_t WEEK_REG ; + + __IO uint32_t SECONDS_CNT_REG ; + __IO uint32_t MINUTES_CNT_REG ; + __IO uint32_t HOURS_CNT_REG ; + __IO uint32_t DAY_CNT_REG ; + __IO uint32_t MONTH_CNT_REG ; + __IO uint32_t YEAR_CNT_REG ; + __IO uint32_t WEEKDAY_CNT_REG ; + __IO uint32_t WEEK_CNT_REG ; +} RTC_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*---------------------------------- Timer -----------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __I uint32_t TIM1_VAL; + __IO uint32_t TIM1_LOADVAL; + __IO uint32_t TIM1_BGLOADVAL; + __IO uint32_t TIM1_CTRL; + __IO uint32_t TIM1_RIS; + __I uint32_t TIM1_MIS; + + __I uint32_t TIM2_VAL; + __IO uint32_t TIM2_LOADVAL; + __IO uint32_t TIM2_BGLOADVAL; + __IO uint32_t TIM2_CTRL; + __IO uint32_t TIM2_RIS; + __I uint32_t TIM2_MIS; + + __I uint32_t TIM64_VAL_U; + __I uint32_t TIM64_VAL_L; + __IO uint32_t TIM64_LOADVAL_U; + __IO uint32_t TIM64_LOADVAL_L; + __IO uint32_t TIM64_BGLOADVAL_U; + __IO uint32_t TIM64_BGLOADVAL_L; + __IO uint32_t TIM64_CTRL; + __IO uint32_t TIM64_RIS; + __I uint32_t TIM64_MIS; + __IO uint32_t TIM64_MODE; +} TIMER_TypeDef; + +/*------------------------------------------------------------------------------ + * Timer bit band + */ +typedef struct +{ + __I uint32_t TIM1_VALUE_BIT[32]; + __IO uint32_t TIM1_LOADVAL[32]; + __IO uint32_t TIM1_BGLOADVAL[32]; + + __IO uint32_t TIM1ENABLE; + __IO uint32_t TIM1MODE; + __IO uint32_t TIM1INTEN; + __IO uint32_t TIM1_CTRL_RESERVED[29]; + __IO uint32_t TIM1_RIS[32]; + __I uint32_t TIM1_MIS[32]; + + __I uint32_t TIM2_VALUE[32]; + __IO uint32_t TIM2_LOADVAL[32]; + __IO uint32_t TIM2_BGLOADVAL[32]; + + __IO uint32_t TIM2ENABLE; + __IO uint32_t TIM2MODE; + __IO uint32_t TIM2INTEN; + __IO uint32_t TIM2_CTRL[29]; + __IO uint32_t TIM2_RIS[32]; + __I uint32_t TIM2_MIS[32]; + + __I uint32_t TIM64VALUEU[32]; + __I uint32_t TIM64VALUEL[32]; + __IO uint32_t TIM64LOADVALUEU[32]; + __IO uint32_t TIM64LOADVALUEL[32]; + __IO uint32_t TIM64BGLOADVALUEU[32]; + __IO uint32_t TIM64BGLOADVALUEL[32]; + __IO uint32_t TIM64ENABLE; + __IO uint32_t TIM64MODE; + __IO uint32_t TIM64INTEN; + __IO uint32_t TIM64_CTRL[29]; + __IO uint32_t TIM64_RIS[32]; + __I uint32_t TIM64_MIS[32]; + __IO uint32_t TIM64_MODE[32]; +} TIMER_BitBand_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*--------------------------------- Watchdog ---------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __I uint32_t WDOGVALUE; + __I uint32_t WDOGLOAD; + __I uint32_t WDOGMVRP; + __O uint32_t WDOGREFRESH; + __I uint32_t WDOGENABLE; + __IO uint32_t WDOGCONTROL; + __I uint32_t WDOGSTATUS; + __IO uint32_t WDOGRIS; + __I uint32_t WDOGMIS; +} WATCHDOG_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*----------------------------- Real Time Clock ------------------------------*/ +/*----------------------------------------------------------------------------*/ + +/*----------------------------------------------------------------------------*/ +/*----------------------------- Peripherals DMA ------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t CRTL; + __IO uint32_t STATUS; + __IO uint32_t BUFFER_A_SRC_ADDR; + __IO uint32_t BUFFER_A_DEST_ADDR; + __IO uint32_t BUFFER_A_TRANSFER_COUNT; + __IO uint32_t BUFFER_B_SRC_ADDR; + __IO uint32_t BUFFER_B_DEST_ADDR; + __IO uint32_t BUFFER_B_TRANSFER_COUNT; +} PDMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t RATIO_HIGH_LOW; + __IO uint32_t BUFFER_STATUS; + uint32_t RESERVED[6]; + PDMA_Channel_TypeDef CHANNEL[8]; +} PDMA_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*------------------------------ Ethernet MAC --------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + /* + * MAC registers (MCXMAC) + */ + __IO uint32_t CFG1; + __IO uint32_t CFG2; + __IO uint32_t IFG; + __IO uint32_t HALF_DUPLEX; + __IO uint32_t MAX_FRAME_LENGTH; + uint32_t RESERVED0[2]; + __IO uint32_t TEST; + __IO uint32_t MII_CONFIG; + __IO uint32_t MII_COMMAND; + __IO uint32_t MII_ADDRESS; + __O uint32_t MII_CTRL; + __I uint32_t MII_STATUS; + __I uint32_t MII_INDICATORS; + __IO uint32_t INTERFACE_CTRL; + __I uint32_t INTERFACE_STATUS; + __IO uint32_t STATION_ADDRESS1; + __IO uint32_t STATION_ADDRESS2; + /* + * FIFO Configuration / Access registers (MCXFIF) + */ + __IO uint32_t FIFO_CFG0; + __IO uint32_t FIFO_CFG1; + __IO uint32_t FIFO_CFG2; + __IO uint32_t FIFO_CFG3; + __IO uint32_t FIFO_CFG4; + __IO uint32_t FIFO_CFG5; + __IO uint32_t FIFO_RAM_ACCESS0; + __IO uint32_t FIFO_RAM_ACCESS1; + __IO uint32_t FIFO_RAM_ACCESS2; + __I uint32_t FIFO_RAM_ACCESS3; + __IO uint32_t FIFO_RAM_ACCESS4; + __IO uint32_t FIFO_RAM_ACCESS5; + __IO uint32_t FIFO_RAM_ACCESS6; + __I uint32_t FIFO_RAM_ACCESS7; + /* + * Statistics registers (MSTAT) + */ + __IO uint32_t TR64; + __IO uint32_t TR127; + __IO uint32_t TR255; + __IO uint32_t TR511; + __IO uint32_t TR1K; + __IO uint32_t TRMAX; + __IO uint32_t TRMGV; + __IO uint32_t RBYT; + __IO uint32_t PPKT; + __IO uint32_t RFCS; + __IO uint32_t RMCA; + __IO uint32_t RBCA; + __IO uint32_t RXCF; + __IO uint32_t RXPF; + __IO uint32_t RXUO; + __IO uint32_t RALN; + __IO uint32_t RFLR; + __IO uint32_t RCDE; + __IO uint32_t RCSE; + __IO uint32_t RUND; + __IO uint32_t ROVR; + __IO uint32_t RFRG; + __IO uint32_t RJBR; + __IO uint32_t RDRP; + __IO uint32_t TBYT; + __IO uint32_t TPKT; + __IO uint32_t TMCA; + __IO uint32_t TBCA; + __IO uint32_t TXPF; + __IO uint32_t TDFR; + __IO uint32_t TEDF; + __IO uint32_t TSCL; + __IO uint32_t TMCL; + __IO uint32_t TLCL; + __IO uint32_t TXCL; + __IO uint32_t TNCL; + __IO uint32_t TPFH; + __IO uint32_t TDRP; + __IO uint32_t TJBR; + __IO uint32_t TFCS; + __IO uint32_t TXCF; + __IO uint32_t TOVR; + __IO uint32_t TUND; + __IO uint32_t TFRG; + __I uint32_t CAR1; + __I uint32_t CAR2; + __IO uint32_t CAM1; + __IO uint32_t CAM2; + uint32_t RESERVED1[16]; + /* + * DMA registers (MAHBE) + */ + __IO uint32_t DMA_TX_CTRL; + __IO uint32_t DMA_TX_DESC; + __IO uint32_t DMA_TX_STATUS; + __IO uint32_t DMA_RX_CTRL; + __IO uint32_t DMA_RX_DESC; + __IO uint32_t DMA_RX_STATUS; + __IO uint32_t DMA_IRQ_MASK; + __I uint32_t DMA_IRQ; +} MAC_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*------------------------------ USB --------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint16_t TX_MAX_P; + __IO uint16_t TX_CSR; + __IO uint16_t RX_MAX_P; + __IO uint16_t RX_CSR; + __IO uint16_t RX_COUNT; + __IO uint8_t TX_TYPE; + __IO uint8_t TX_INTERVAL; + __IO uint8_t RX_TYPE; + __IO uint8_t RX_INTERVAL; + __IO uint8_t RESERVED; + __IO uint8_t FIFO_SIZE; +} USB_endpoint_regs_t; + +typedef struct +{ + __IO uint8_t TX_FUNC_ADDR; + __IO uint8_t UNUSED0; + __IO uint8_t TX_HUB_ADDR; + __IO uint8_t TX_HUB_PORT; + __IO uint8_t RX_FUNC_ADDR; + __IO uint8_t UNUSED1; + __IO uint8_t RX_HUB_ADDR; + __IO uint8_t RX_HUB_PORT; +} USB_tar_t; + +typedef union +{ + struct + { + __IO uint32_t VALUE; + } WORD; + + struct + { + __IO uint8_t VALUE; + __IO uint8_t RESERVED1; + __IO uint8_t RESERVED2; + __IO uint8_t RESERVED3; + } BYTE; + + struct + { + __IO uint16_t VALUE; + __IO uint16_t RESERVED; + } HALFWORD; +} USB_fifo_t; + +typedef union +{ + struct + { + __IO uint16_t TX_MAX_P; + __IO uint16_t CSR0; + __IO uint16_t RX_MAX_P; + __IO uint16_t RX_CSR; + __IO uint16_t COUNT0; + __IO uint8_t RESERVED0; + __IO uint8_t RESERVED1; + __IO uint8_t RESERVED2; + __IO uint8_t RESERVED3; + __IO uint8_t RESERVED4; + __IO uint8_t CONFIG_DATA; + } DEVICE_EP0; + + struct + { + __IO uint16_t TX_MAX_P; + __IO uint16_t TX_CSR; + __IO uint16_t RX_MAX_P; + __IO uint16_t RX_CSR; + __IO uint16_t RX_COUNT; + __IO uint8_t RESERVED0; + __IO uint8_t RESERVED1; + __IO uint8_t RESERVED2; + __IO uint8_t RESERVED3; + __IO uint8_t RESERVED4; + __IO uint8_t FIFO_SIZE; + } DEVICE_EPN; + + struct + { + __IO uint16_t TX_MAX_P; + __IO uint16_t CSR0; + __IO uint16_t RX_MAX_P; + __IO uint16_t RX_CSR; + __IO uint16_t COUNT0; + __IO uint8_t TYPE0; + __IO uint8_t NAK_LIMIT0; + __IO uint8_t RX_TYPE; + __IO uint8_t RX_INTERVAL; + __IO uint8_t RESERVED0; + __IO uint8_t CONFIG_DATA; + } HOST_EP0; + + struct + { + __IO uint16_t TX_MAX_P; + __IO uint16_t TX_CSR; + __IO uint16_t RX_MAX_P; + __IO uint16_t RX_CSR; + __IO uint16_t RX_COUNT; + __IO uint8_t TX_TYPE; + __IO uint8_t TX_INTERVAL; + __IO uint8_t RX_TYPE; + __IO uint8_t RX_INTERVAL; + __IO uint8_t RESERVED0; + __IO uint8_t FIFO_SIZE; + } HOST_EPN; + +} USB_indexed_csr_t; + +typedef struct { + __IO uint32_t IRQ; + __IO uint32_t CNTL; + __IO uint32_t ADDR; + __IO uint32_t COUNT; +} USB_DMA_channel; + +typedef struct +{ + /* + * Common USB Registers + */ + __IO uint8_t FADDR; + __IO uint8_t POWER; + __IO uint16_t TX_IRQ; + __IO uint16_t RX_IRQ; + __IO uint16_t TX_IRQ_ENABLE; + __IO uint16_t RX_IRQ_ENABLE; + __IO uint8_t USB_IRQ; + __IO uint8_t USB_ENABLE; + __IO uint16_t FRAME; + __IO uint8_t INDEX; + __IO uint8_t TEST_MODE; + + /* + * Indexed CSR + */ + USB_indexed_csr_t INDEXED_CSR; + + /* + * Endpoint FIFOs + */ + USB_fifo_t FIFO[16]; + + /* + * OTG, dynamic FIFO and version + */ + __IO uint8_t DEV_CTRL; + __IO uint8_t MISC; + __IO uint8_t TX_FIFO_SIZE; + __IO uint8_t RX_FIFO_SIZE; + __IO uint16_t TX_FIFO_ADDR; + __IO uint16_t RX_FIFO_ADDR; + __IO uint32_t VBUS_CSR; + __IO uint16_t HW_VERSION; + __IO uint16_t RESERVED; + + /* + * ULPI and configuration registers + */ + __IO uint8_t ULPI_VBUS_CTRL; + __IO uint8_t ULPI_CARKIT_CTRL; + __IO uint8_t ULPI_IRQ_MASK; + __IO uint8_t ULPI_IRQ_SRC; + __IO uint8_t ULPI_DATA_REG; + __IO uint8_t ULPI_ADDR_REG; + __IO uint8_t ULPI_CTRL_REG; + __IO uint8_t ULPI_RAW_DATA; + __IO uint8_t EP_INFO; + __IO uint8_t RAM_INFO; + __IO uint8_t LINK_INFO; + __IO uint8_t VP_LEN; + __IO uint8_t HS_EOF1; + __IO uint8_t FS_EOF1; + __IO uint8_t LS_EOF1; + __IO uint8_t SOFT_RST; + + /* + * Target Address registers + */ + USB_tar_t TAR[16]; + + /* + * Endpoints CSR + */ + USB_endpoint_regs_t ENDPOINT[16]; + + /* + * DMA + */ + USB_DMA_channel DMA_CHANNEL[8]; + + __IO uint32_t RESERVED_EXT[32]; + __IO uint32_t RQ_PKT_CNT[16]; + __IO uint16_t RX_DPBUF_DIS; + __IO uint16_t TX_DPBUF_DIS; + __IO uint16_t C_T_UCH; + __IO uint16_t C_T_HHSRTN; + __IO uint16_t C_T_HSBT; + +} MSS_USB_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*---------------------- eNVM Special Function Registers ---------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __I uint8_t AB[128]; + __IO uint8_t WD[128]; + __I uint8_t RESERVED0[32]; + __I uint32_t STATUS; + __IO uint32_t RESERVED1; + __IO uint32_t NV_PAGE_STATUS; + __I uint32_t NV_FREQRNG; + __I uint32_t NV_DPD; + __IO uint32_t NV_CE; + uint32_t RESERVED2; + __IO uint32_t RESERVED3; + __IO uint32_t PAGE_LOCK; + __IO uint32_t DWSIZE; + __IO uint32_t CMD; + __IO uint32_t RESERVED4; + __I uint32_t RESERVED5; + __IO uint32_t INTEN; + __IO uint32_t CLRHINT; + uint32_t RESERVED6[40]; + __IO uint32_t REQ_ACCESS; +} NVM_TypeDef; + +typedef struct +{ + __I uint32_t AB[32]; + __IO uint32_t WD[32]; + __I uint32_t RESERVED0[8]; + __I uint32_t STATUS; + __IO uint32_t RESERVED1; + __IO uint32_t NV_PAGE_STATUS; + __I uint32_t NV_FREQRNG; + __I uint32_t NV_DPD; + __IO uint32_t NV_CE; + uint32_t RESERVED2; + __IO uint32_t RESERVED3; + __IO uint32_t PAGE_LOCK; + __IO uint32_t DWSIZE; + __IO uint32_t CMD; + __IO uint32_t RESERVED4; + __I uint32_t RESERVED5; + __IO uint32_t INTEN; + __IO uint32_t CLRHINT; + uint32_t RESERVED6[40]; + __IO uint32_t REQ_ACCESS; +} NVM32_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*---------------------------------- COMBLK ----------------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t CONTROL; + __IO uint32_t STATUS; + __IO uint32_t INT_ENABLE; + __IO uint32_t RESERVED; + __IO uint32_t DATA8; + __IO uint32_t DATA32; + __IO uint32_t FRAME_START8; + __IO uint32_t FRAME_START32; +} COMBLK_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*--------------------- FPGA Fabric Interrupt Controller ---------------------*/ +/*----------------------------------------------------------------------------*/ +/* + * Please refer to the SmartFusion2 Interrupt Controller User's Guide for a + * description of the following registers. + * The registers defined below can be accessed using INTERRUPT_CTRL as follows: + * uint32_t reason0; + * INTERRUPT_CTRL->INTERRUPT_MODE = 0; + * reason0 = INTERRUPT_CTRL->INTERRUPT_REASON0; + */ +typedef struct +{ + __IO uint32_t INTERRUPT_ENABLE0; + __IO uint32_t INTERRUPT_ENABLE1; + __IO uint32_t INTERRUPT_REASON0; + __IO uint32_t INTERRUPT_REASON1; + __IO uint32_t INTERRUPT_MODE; +} INTERRUPT_CTRL_TypeDef; + +/* + * Please refer to the SmartFusion2 Interrupt Controller User's Guide for a + * description of the following register bits. + * The register bits defined below can be accessed using INTERRUPT_CTRL_BITBAND + * as follows: + * setting/clearing a bit: + * INTERRUPT_CTRL_BITBAND->MAC_INT_ENBL = 1; + * INTERRUPT_CTRL_BITBAND->PDMAINTERRUPT_ENBL = 0; + * reading a bit value: + * uint32_t timer1_interrupt; + * timer1_interrupt = INTERRUPT_CTRL_BITBAND->TIMER1_INTR_STATUS; + */ +typedef struct +{ + /* + * INTERRUPT_ENABLE0 register bitband definitions. + */ + __IO uint32_t SPIINT0_ENBL; + __IO uint32_t SPIINT1_ENBL; + __IO uint32_t I2C_INT0_ENBL; + __IO uint32_t I2C_INT1_ENBL; + __IO uint32_t MMUART0_INTR_ENBL; + __IO uint32_t MMUART1_INTR_ENBL; + __IO uint32_t MAC_INT_ENBL; + __IO uint32_t USB_MC_INT_ENBL; + __IO uint32_t PDMAINTERRUPT_ENBL; + __IO uint32_t HPD_XFR_CMP_INT_ENBL; + __IO uint32_t TIMER1_INTR_ENBL; + __IO uint32_t TIMER2_INTR_ENBL; + __IO uint32_t CAN_INTR_ENBL; + __IO uint32_t RTC_WAKEUP_INTR_ENBL; + __IO uint32_t WDOGWAKEUPINT_ENBL; + __IO uint32_t MSSDDR_PLL_LOCKLOST_INT_ENBL; + __IO uint32_t ENVM_INT0_ENBL; + __IO uint32_t ENVM_INT1_ENBL; + __IO uint32_t I2C_SMBALERT0_ENBL; + __IO uint32_t I2C_SMBSUS0_ENBL; + __IO uint32_t I2C_SMBALERT1_ENBL; + __IO uint32_t I2C_SMBSUS1_ENBL; + __IO uint32_t HPD_XFR_ERR_INT_ENBL; + __IO uint32_t MSSDDR_PLL_LOCK_INT_ENBL; + __IO uint32_t SW_ERRORINTERRUPT_ENBL; + __IO uint32_t DDRB_INTR_ENBL; + __IO uint32_t ECCINTR_ENBL; + __IO uint32_t CACHE_ERRINTR_ENBL; + __IO uint32_t SOFTINTERRUPT_ENBL; + __IO uint32_t COMBLK_INTR_ENBL; + __IO uint32_t USB_DMA_INT_ENBL; + __IO uint32_t RESERVED0; + + /* + * INTERRUPT_ENABLE1 register bitband definitions. + */ + __IO uint32_t RESERVED1[3]; + __IO uint32_t MDDR_IO_CALIB_INT_ENBL; + __IO uint32_t RESERVED2; + __IO uint32_t FAB_PLL_LOCK_INT_ENBL; + __IO uint32_t FAB_PLL_LOCKLOST_INT_ENBL; + __IO uint32_t FIC64_INT_ENBL; + __IO uint32_t RESERVED3[24]; + + /* + * INTERRUPT_REASON0 register bitband definitions. + */ + __IO uint32_t SPIINT0_STATUS; + __IO uint32_t SPIINT1_STATUS; + __IO uint32_t I2C_INT0_STATUS; + __IO uint32_t I2C_INT1_STATUS; + __IO uint32_t MMUART0_INTR_STATUS; + __IO uint32_t MMUART1_INTR_STATUS; + __IO uint32_t MAC_INT_STATUS; + __IO uint32_t USB_MC_INT_STATUS; + __IO uint32_t PDMAINTERRUPT_STATUS; + __IO uint32_t HPD_XFR_CMP_INT_STATUS; + __IO uint32_t TIMER1_INTR_STATUS; + __IO uint32_t TIMER2_INTR_STATUS; + __IO uint32_t CAN_INTR_STATUS; + __IO uint32_t RTC_WAKEUP_INTR_STATUS; + __IO uint32_t WDOGWAKEUPINT_STATUS; + __IO uint32_t MSSDDR_PLL_LOCKLOST_INT_STATUS; + __IO uint32_t ENVM_INT0_STATUS; + __IO uint32_t ENVM_INT1_STATUS; + __IO uint32_t I2C_SMBALERT0_STATUS; + __IO uint32_t I2C_SMBSUS0_STATUS; + __IO uint32_t I2C_SMBALERT1_STATUS; + __IO uint32_t I2C_SMBSUS1_STATUS; + __IO uint32_t HPD_XFR_ERR_INT_STATUS; + __IO uint32_t MSSDDR_PLL_LOCK_INT_STATUS; + __IO uint32_t SW_ERRORINTERRUPT_STATUS; + __IO uint32_t DDRB_INTR_STATUS; + __IO uint32_t ECCINTR_STATUS; + __IO uint32_t CACHE_ERRINTR_STATUS; + __IO uint32_t SOFTINTERRUPT_STATUS; + __IO uint32_t COMBLK_INTR_STATUS; + __IO uint32_t USB_DMA_INT_STATUS; + __IO uint32_t RESERVED4; + + /* + * INTERRUPT_REASON1 register bitband definitions. + */ + __IO uint32_t RESERVED5[3]; + __IO uint32_t MDDR_IO_CALIB_INT_STATUS; + __IO uint32_t RESERVED6; + __IO uint32_t FAB_PLL_LOCK_INT_STATUS; + __IO uint32_t FAB_PLL_LOCKLOST_INT_STATUS; + __IO uint32_t FIC64_INT_STATUS; + __IO uint32_t RESERVED7[24]; + + /* + * INTERRUPT_MODE register bitband definitions. + */ + __IO uint32_t SELECT_MODE; + __IO uint32_t RESERVED8[31]; + +} INTERRUPT_CTRL_BitBand_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*------------------------ DDR Controller APB Registers ----------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + /*-------------------------------------------------------------------------- + * DDR Controller registers. + * All registers are 16-bit wide unless mentioned beside the definition. + */ + struct + { + __IO uint32_t DYN_SOFT_RESET_CR; + __IO uint32_t RESERVED0; + __IO uint32_t DYN_REFRESH_1_CR; + __IO uint32_t DYN_REFRESH_2_CR; + __IO uint32_t DYN_POWERDOWN_CR; + __IO uint32_t DYN_DEBUG_CR; + __IO uint32_t MODE_CR; + __IO uint32_t ADDR_MAP_BANK_CR; + __IO uint32_t ECC_DATA_MASK_CR; + __IO uint32_t ADDR_MAP_COL_1_CR; + __IO uint32_t ADDR_MAP_COL_2_CR; + __IO uint32_t ADDR_MAP_ROW_1_CR; + __IO uint32_t ADDR_MAP_ROW_2_CR; + __IO uint32_t INIT_1_CR; + __IO uint32_t CKE_RSTN_CYCLES_CR[2]; /* 0:27 bits are valid */ + __IO uint32_t INIT_MR_CR; + __IO uint32_t INIT_EMR_CR; + __IO uint32_t INIT_EMR2_CR; + __IO uint32_t INIT_EMR3_CR; + __IO uint32_t DRAM_BANK_TIMING_PARAM_CR; + __IO uint32_t DRAM_RD_WR_LATENCY_CR; + __IO uint32_t DRAM_RD_WR_PRE_CR; + __IO uint32_t DRAM_MR_TIMING_PARAM_CR; + __IO uint32_t DRAM_RAS_TIMING_CR; + __IO uint32_t DRAM_RD_WR_TRNARND_TIME_CR; + __IO uint32_t DRAM_T_PD_CR; + __IO uint32_t DRAM_BANK_ACT_TIMING_CR; + __IO uint32_t ODT_PARAM_1_CR; + __IO uint32_t ODT_PARAM_2_CR; + __IO uint32_t ADDR_MAP_COL_3_CR; + __IO uint32_t MODE_REG_RD_WR_CR; + __IO uint32_t MODE_REG_DATA_CR; + __IO uint32_t PWR_SAVE_1_CR; + __IO uint32_t PWR_SAVE_2_CR; + __IO uint32_t ZQ_LONG_TIME_CR; + __IO uint32_t ZQ_SHORT_TIME_CR; + __IO uint32_t ZQ_SHORT_INT_REFRESH_MARGIN_CR[2]; + __IO uint32_t PERF_PARAM_1_CR; + __IO uint32_t HPR_QUEUE_PARAM_CR[2]; + __IO uint32_t LPR_QUEUE_PARAM_CR[2]; + __IO uint32_t WR_QUEUE_PARAM_CR; + __IO uint32_t PERF_PARAM_2_CR; + __IO uint32_t PERF_PARAM_3_CR; + __IO uint32_t DFI_RDDATA_EN_CR; + __IO uint32_t DFI_MIN_CTRLUPD_TIMING_CR; + __IO uint32_t DFI_MAX_CTRLUPD_TIMING_CR; + __IO uint32_t DFI_WR_LVL_CONTROL_CR[2]; + __IO uint32_t DFI_RD_LVL_CONTROL_CR[2]; + __IO uint32_t DFI_CTRLUPD_TIME_INTERVAL_CR; + __IO uint32_t DYN_SOFT_RESET_CR2; + __IO uint32_t AXI_FABRIC_PRI_ID_CR; + __I uint32_t DDRC_SR; + __I uint32_t SINGLE_ERR_CNT_SR; + __I uint32_t DOUBLE_ERR_CNT_SR; + __I uint32_t LUE_SYNDROME_SR[5]; /* LUE : Last Uncorrected Error */ + __I uint32_t LUE_ADDRESS_SR[2]; + __I uint32_t LCE_SYNDROME_SR[5]; /* LCE : Last Corrected Error */ + __I uint32_t LCE_ADDRESS_SR[2]; + __I uint32_t LCB_NUMBER_SR; /* LCB : Last Corrected Bit */ + __I uint32_t LCB_MASK_SR[4]; + __I uint32_t ECC_INT_SR; + __O uint32_t ECC_INT_CLR_REG; + __I uint32_t ECC_OUTPUT_DATA_SR; + __IO uint32_t RESERVED1[46]; + } ddrc; + + /*-------------------------------------------------------------------------- + * DDR PHY configuration registers + */ + struct + { + __IO uint32_t DYN_BIST_TEST_CR; + __IO uint32_t DYN_BIST_TEST_ERRCLR_CR[3]; + __IO uint32_t BIST_TEST_SHIFT_PATTERN_CR[3]; + __IO uint32_t LOOPBACK_TEST_CR; + __IO uint32_t BOARD_LOOPBACK_CR; + __IO uint32_t CTRL_SLAVE_RATIO_CR; + __IO uint32_t CTRL_SLAVE_FORCE_CR; + __IO uint32_t CTRL_SLAVE_DELAY_CR; + __IO uint32_t DATA_SLICE_IN_USE_CR; + __IO uint32_t LVL_NUM_OF_DQ0_CR; + __IO uint32_t DQ_OFFSET_CR[3]; + __IO uint32_t DIS_CALIB_RST_CR; + __IO uint32_t DLL_LOCK_DIFF_CR; + __IO uint32_t FIFO_WE_IN_DELAY_CR[3]; + __IO uint32_t FIFO_WE_IN_FORCE_CR; + __IO uint32_t FIFO_WE_SLAVE_RATIO_CR[4]; + __IO uint32_t GATELVL_INIT_MODE_CR; + __IO uint32_t GATELVL_INIT_RATIO_CR[4]; + __IO uint32_t LOCAL_ODT_CR; + __IO uint32_t INVERT_CLKOUT_CR; + __IO uint32_t RD_DQS_SLAVE_DELAY_CR[3]; + __IO uint32_t RD_DQS_SLAVE_FORCE_CR; + __IO uint32_t RD_DQS_SLAVE_RATIO_CR[4]; + __IO uint32_t WR_DQS_SLAVE_DELAY_CR[3]; + __IO uint32_t WR_DQS_SLAVE_FORCE_CR; + __IO uint32_t WR_DQS_SLAVE_RATIO_CR[4]; + __IO uint32_t WR_DATA_SLAVE_DELAY_CR[3]; + __IO uint32_t WR_DATA_SLAVE_FORCE_CR; + __IO uint32_t WR_DATA_SLAVE_RATIO_CR[4]; + __IO uint32_t WRLVL_INIT_MODE_CR; + __IO uint32_t WRLVL_INIT_RATIO_CR[4]; + __IO uint32_t WR_RD_RL_CR; + __IO uint32_t RDC_FIFO_RST_ERRCNTCLR_CR; + __IO uint32_t RDC_WE_TO_RE_DELAY_CR; + __IO uint32_t USE_FIXED_RE_CR; + __IO uint32_t USE_RANK0_DELAYS_CR; + __IO uint32_t USE_LVL_TRNG_LEVEL_CR; + __IO uint32_t CONFIG_CR; + __IO uint32_t RD_WR_GATE_LVL_CR; + __IO uint32_t DYN_RESET_CR; + + /*---------------------------------------------------------------------- + * DDR PHY status registers + */ + __I uint32_t LEVELLING_FAILURE_SR; + __I uint32_t BIST_ERROR_SR[3]; + __I uint32_t WRLVL_DQS_RATIO_SR[4]; + __I uint32_t WRLVL_DQ_RATIO_SR[4]; + __I uint32_t RDLVL_DQS_RATIO_SR[4]; + __I uint32_t FIFO_SR[4]; + __I uint32_t MASTER_DLL_SR; + __I uint32_t DLL_SLAVE_VALUE_SR[2]; + __I uint32_t STATUS_OF_IN_DELAY_VAL_SR[2]; + __I uint32_t STATUS_OF_OUT_DELAY_VAL_SR[2]; + __I uint32_t DLL_LOCK_AND_SLAVE_VAL_SR; + __I uint32_t CTRL_OUTPUT_FILTER_SR; + __I uint32_t CTRL_OF_OUTPUT_DELAY_SR; + __I uint32_t RD_DQS_SLAVE_DLL_VAL_SR[3]; + __I uint32_t WR_DATA_SLAVE_DLL_VAL_SR[3]; + __I uint32_t FIFO_WE_SLAVE_DLL_VAL_SR[3]; + __I uint32_t WR_DQS_SLAVE_DLL_VAL_SR[3]; + __I uint32_t CTRL_SLAVE_DLL_VAL_SR; + __IO uint32_t RESERVED2[13]; + } phy; + + /*-------------------------------------------------------------------------- + * FIC-64 registers + * These registers are 16-bit wide and 32-bit aligned. + */ + struct + { + __IO uint32_t NB_ADDR_CR; + __IO uint32_t NBRWB_SIZE_CR; + __IO uint32_t WB_TIMEOUT_CR; + __IO uint32_t HPD_SW_RW_EN_CR; + __IO uint32_t HPD_SW_RW_INVAL_CR; + __IO uint32_t SW_WR_ERCLR_CR; + __IO uint32_t ERR_INT_ENABLE_CR; + __IO uint32_t NUM_AHB_MASTERS_CR; + __I uint32_t HPB_ERR_ADDR_SR[2]; + __I uint32_t SW_ERR_ADDR_SR[2]; + __I uint32_t HPD_SW_WRB_EMPTY_SR; + __I uint32_t SW_HPB_LOCKOUT_SR; + __I uint32_t SW_HPD_WERR_SR; + uint32_t RESERVED0; + __IO uint32_t LOCK_TIMEOUTVAL_CR[2]; + __IO uint32_t LOCK_TIMEOUT_EN_CR; + uint32_t RESERVED1[5]; + __IO uint32_t RDWR_ERR_SR; + } fic; +} DDRCore_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*--------------------- MDDR APB Configuration Registers ---------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + /*-------------------------------------------------------------------------- + * MDDR core configuration registers. + * These registers are to be accessed as: + * MDDR->core.fic. = ; + * MDDR->core.phy. = ; + * MDDR->core.ddrc. = ; + */ + DDRCore_TypeDef core; + +} MDDR_TypeDef; + + +/*----------------------------------------------------------------------------*/ +/*--------------------- FDDR APB Configuration Registers ---------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + /*-------------------------------------------------------------------------- + * FDDR core configuration registers. These are same as corresponding + * MDDR registers. + * These registers are to be accessed as: + * FDDR->core.fic. = ; + * FDDR->core.phy. = ; + * FDDR->core.ddrc. = ; + */ + DDRCore_TypeDef core; + __IO uint32_t RESERVED[39]; + + /*-------------------------------------------------------------------------- + * FDDR system registers + * These registers are to be accessed as: + * FDDR->sysreg.PLL_CONFIG_LOW_2 = 0x04u; + */ + struct + { + __IO uint32_t PLL_CONFIG_LOW_1; + __IO uint32_t PLL_CONFIG_LOW_2; + __IO uint32_t PLL_CONFIG_HIGH; + __IO uint32_t FACC_CLK_EN; + __IO uint32_t FACC_MUX_CONFIG; + __IO uint32_t FACC_DIVISOR_RATIO; + __IO uint32_t PLL_DELAY_LINE_SEL; + __IO uint32_t SOFT_RESET; + __IO uint32_t IO_CALIB; + __IO uint32_t INTERRUPT_ENABLE; + __IO uint32_t AXI_AHB_MODE_SEL; + __IO uint32_t PHY_SELF_REF_EN; + __IO uint32_t FAB_PLL_CLK_SR; + __IO uint32_t FPLL_CLK_SR; + __IO uint32_t CLK_CALIB_STATUS; + __IO uint32_t INTERRUPT_SR; + __IO uint32_t CLK_CALIB_CONFIG; + __IO uint32_t IO_CALIB_SR; + __IO uint32_t FATC_RESET; + } sysreg; +} FDDR_TypeDef; + +/*----------------------------------------------------------------------------*/ +/*------------------------------ SERDES Interface ----------------------------*/ +/*----------------------------------------------------------------------------*/ + +/*------------------------------------------------------------------------------ + AXI window + */ +typedef struct +{ + __IO uint32_t base; + __IO uint32_t size; + __IO uint32_t window_lsb; + __IO uint32_t window_msb; +} axi_window_TypeDef; + +/*------------------------------------------------------------------------------ + PCI Express Bridge Core registers. + + This data structure is used to access to the registers of the PCI Express + Bridge Core. + */ +typedef struct +{ + /*======================= Information registers ======================*/ + /** + Information register: vendor_id & device_id + bits [15:0] vendor_id + bits [31:16] device_id + */ + /* 0x000 */ + __IO uint32_t VID_DEVID; + + /** + PCI Express Control & Status Register: cfg_prmscr + */ + /* 0x004 */ + __IO uint32_t CFG_PRMSCR; + + /** + Information register: class_code + */ + /* 0x008 */ + __IO uint32_t CLASS_CODE; + + __IO uint32_t RESERVED0; + + /** + Bridge Configuration Register: bar0 + */ + /* 0x010 */ + __IO uint32_t BAR0; + + /** + Bridge Configuration Register: bar1 + */ + /* 0x014 */ + __IO uint32_t BAR1; + + /** + Bridge Configuration Register: bar2 + */ + /* 0x018 */ + __IO uint32_t BAR2; + + /** + Bridge Configuration Register: bar3 + */ + /* 0x01C */ + __IO uint32_t BAR3; + + /** + Bridge Configuration Register: bar4 + */ + /* 0x020 */ + __IO uint32_t BAR4; + + /** + Bridge Configuration Register: bar5 + */ + /* 0x024 */ + __IO uint32_t BAR5; + + __IO uint32_t RESERVED1; + + /** + Information register: subsystem_id + */ + /* 0x02C */ + __IO uint32_t SUBSYSTEM_ID; + + /** + PCI Express Control & Status Register: pcie_devscr + */ + /* 0x030 */ + __IO uint32_t PCIE_DEVSCR; + + /** + PCI Express Control & Status Register: pcie_linkscr + */ + /* 0x034 */ + __IO uint32_t PCIE_LINKSCR; + + /** + Bridge Configuration Register: tc_vc_mapping + */ + /* 0x038 */ + __IO uint32_t TC_VC_MAPPING; + + /** + Information register: captured_bus_device_nb + */ + /* 0x03C */ + __IO uint32_t CAPTURED_BUS_DEVICE_NB; + + /** + Endpoint Interrupt register: msi_ctrl_status + */ + /* 0x040 */ + __IO uint32_t MSI_CTRL_STATUS; + + /** + Power Management register: ltssm + */ + /* 0x044 */ + __IO uint32_t LTSSM; + + /** + Power Management register: power_mgt_capability + */ + /* 0x048 */ + __IO uint32_t POWER_MGT_CAPABILITY; + + /** + PCI Express Control & Status Register: cfg_pmscr + */ + /* 0x04C */ + __IO uint32_t CFG_PMSCR; + + /** + Bridge Configuration Register: aer_ecrc_capability + */ + /* 0x050 */ + __IO uint32_t AER_ECRC_CAPABILITY; + + /** + Bridge Configuration Register: vc1_capability + */ + /* 0x054 */ + __IO uint32_t VC1_CAPABILITY; + + /** + Bridge Configuration Register: max_payload_size + */ + /* 0x058 */ + __IO uint32_t MAX_PAYLOAD_SIZE; + + /** + Bridge Configuration Register: clkreq + */ + /* 0x05C */ + __IO uint32_t CLKREQ; + + /** + Power Management register: aspm_l0s_capability + */ + /* 0x060 */ + __IO uint32_t ASPM_L0S_CAPABILITY; + + /** + Power Management register: aspm_l1_capability + */ + /* 0x064 */ + __IO uint32_t ASPM_L1_CAPABILITY; + + /** + Power Management register: timeout_completion + */ + /* 0x068 */ + __IO uint32_t TIMEOUT_COMPLETION; + + __IO uint32_t RESERVED2; + + /** + Power Management register: pm_data_scale + */ + /* 0x070 */ + __IO uint32_t PM_DATA_SCALE[4]; + + /** + Endpoint Interrupt register: msi + */ + /* 0x080 */ + __IO uint32_t MSI[8]; + + /** + Bridge Configuration Register: error_counter + */ + /* 0x0A0 */ + __IO uint32_t ERROR_COUNTER[4]; + + /** + Bridge Configuration Register: credit_allocation + */ + /* 0x0B0 */ + __IO uint32_t CREDIT_ALLOCATION[4]; + + /** + Address Mapping register: axi_slave_window + */ + /* 0x0C0 */ + axi_window_TypeDef AXI_SLAVE_WINDOW[4]; + + /** + Address Mapping register: axi_master_window + */ + /* 0x100 */ + axi_window_TypeDef AXI_MASTER_WINDOW[4]; + + /** + Rootport Interrupt register: imask + */ + /* 0x140 */ + __IO uint32_t IMASK; + + /** + Rootport Interrupt register: istatus + */ + /* 0x144 */ + __IO uint32_t ISTATUS; + + /** + Rootport Interrupt register: icmd + */ + /* 0x148 */ + __IO uint32_t ICMD; + + /** + Rootport Interrupt register: irstatus + */ + /* 0x14C */ + __IO uint32_t IRSTATUS; + + /** + Rootport Interrupt register: imsiaddr + */ + /* 0x150 */ + __IO uint32_t IMSIADDR; + + /** + PCI Express Control & Status Register: slotcap + */ + /* 0x154 */ + __IO uint32_t SLOTCAP; + + /** + PCI Express Control & Status Register: slotcsr + */ + /* 0x158 */ + __IO uint32_t SLOTCSR; + + /** + PCI Express Control & Status Register: rootcsr + */ + /* 0x15C */ + __IO uint32_t ROOTCSR; + + /** + Configuration Register: cfg_control + */ + /* 0x160 */ + __IO uint32_t CFG_CONTROL; + + /** + Configuration Register: cfg_write_data + */ + /* 0x164 */ + __IO uint32_t CFG_WRITE_DATA; + + /** + Configuration Register: cfg_read_data + */ + /* 0x168 */ + __IO uint32_t CFG_READ_DATA; + + /** + Information register: info + */ + /* 0x16C */ + __IO uint32_t INFO; + + /** + Input/Output Control Register: io_control + */ + /* 0x170 */ + __IO uint32_t IO_CONTROL; + + /** + Input/Output Control Register: io_addr + */ + /* 0x174 */ + __IO uint32_t IO_ADDR; + + /** + Input/Output Control Register: io_write_data + */ + /* 0x178 */ + __IO uint32_t IO_WRITE_DATA; + + /** + Input/Output Control Register: io_read_data + */ + /* 0x17C */ + __IO uint32_t IO_READ_DATA; + + /** + Configuration Register: cfg_fbe + */ + /* 0x180 */ + __IO uint32_t CFG_FBE; + + /** + Address Mapping register: prefetch_io_window + */ + /* 0x184 */ + __IO uint32_t PREFETCH_IO_WINDOW; + + __IO uint32_t RESERVED4[31]; + + /** + Bridge Configuration Register: pcie_config + */ + /* 0x204 */ + __IO uint32_t PCIE_CONFIG; + + __IO uint32_t RESERVED5[10]; + + /** + PCI Express Control & Status Register: pcie_dev2scr + */ + /* 0x230 */ + __IO uint32_t PCIE_DEV2SCR; + + /** + PCI Express Control & Status Register: pcie_link2scr + */ + /* 0x234 */ + __IO uint32_t PCIE_LINK2SCR; + + __IO uint32_t RESERVED6[10]; + + /** + Power Management register: aspm_l0s_gen2 capability + */ + /* 0x260 */ + __IO uint32_t ASPM_L0S_GEN2; + + __IO uint32_t RESERVED7[39]; + + /** + Bridge Configuration Register: k_cnt_config + */ + /* 0x300 */ + __IO uint32_t K_CNT_CONFIG[6]; + + __IO uint32_t RESERVED8[826]; + +} PCIE_TypeDef; + +/*------------------------------------------------------------------------------ + SERDESIF System Registers. + */ +typedef struct +{ + __IO uint32_t SER_PLL_CONFIG_LOW; + __IO uint32_t SER_PLL_CONFIG_HIGH; + __IO uint32_t SERDESIF_SOFT_RESET; + __IO uint32_t SER_INTERRUPT_ENABLE; + __IO uint32_t CONFIG_AXI_AHB_BRIDGE; + __IO uint32_t CONFIG_ECC_INTR_ENABLE; + __IO uint32_t CONFIG_TEST_IN; + __IO uint32_t TEST_OUT_READ_ADDR; + __IO uint32_t CONFIG_PCIE_PM; + __IO uint32_t CONFIG_PHY_MODE_0; + __IO uint32_t CONFIG_PHY_MODE_1; + __IO uint32_t CONFIG_PHY_MODE_2; + __IO uint32_t CONFIG_PCIE_0; + __IO uint32_t CONFIG_PCIE_1; + __IO uint32_t CONFIG_PCIE_2; + __IO uint32_t CONFIG_PCIE_3; + __IO uint32_t CONFIG_BAR_SIZE_0_1; + __IO uint32_t CONFIG_BAR_SIZE_2_3; + __IO uint32_t CONFIG_BAR_SIZE_3_4; + __IO uint32_t SER_CLK_STATUS; + __IO uint32_t SER_CLK_CALIB_STATUS; + __IO uint32_t TEST_OUT_READ_DATA; + __IO uint32_t SER_INTERRUPT; + __IO uint32_t SERDESIF_INTR_STATUS; + __IO uint32_t SER_CLK_CALIB_CONFIG; + __IO uint32_t REFCLK_SEL; + __IO uint32_t PCLK_SEL; + __IO uint32_t EPCS_RSTN_SEL; + __IO uint32_t CHIP_ENABLES; + __IO uint32_t SERDES_TEST_OUT; + __IO uint32_t SERDES_FATC_RESET; + __IO uint32_t RC_OSC_SPLL_REFCLK_SEL; + __IO uint32_t SPREAD_SPECTRUM_CLK; + __IO uint32_t CONF_AXI_MSTR_WNDW_0; + __IO uint32_t CONF_AXI_MSTR_WNDW_1; + __IO uint32_t CONF_AXI_MSTR_WNDW_2; + __IO uint32_t CONF_AXI_MSTR_WNDW_3; + __IO uint32_t CONF_AXI_SLV_WNDW_0; + __IO uint32_t CONF_AXI_SLV_WNDW_1; + __IO uint32_t CONF_AXI_SLV_WNDW_2; + __IO uint32_t CONF_AXI_SLV_WNDW_3; + __IO uint32_t DESKEW_CONFIG; + __IO uint32_t DEBUG_MODE_KEY; + __IO uint32_t RESERVED0; + /* + * The following registers are only available on the M2S090. + */ + __IO uint32_t IDDQ; + __IO uint32_t ADVCONFIG; + __IO uint32_t ADVSTATUS; + __IO uint32_t ECC_ERR_INJECT; + __IO uint32_t RESERVED2; + __IO uint32_t RESERVED3; + __IO uint32_t ENHANCEMENT; + __IO uint32_t RESERVED4; + __IO uint32_t RESERVED5; + __IO uint32_t RESERVED6; + __IO uint32_t RESERVED7; + __IO uint32_t RESERVED8; + __IO uint32_t RESERVED9; + __IO uint32_t RESERVED10; + __IO uint32_t RESERVED11; + __IO uint32_t RESERVED12; + __IO uint32_t RESERVED13; + __IO uint32_t RESERVED14; + __IO uint32_t RESERVED15; + __IO uint32_t RESERVED16; + __IO uint32_t RESERVED17; + __IO uint32_t RESERVED18; + __IO uint32_t RESERVED19; + __IO uint32_t RESERVED20; + __IO uint32_t CONFIG2_AXI_AHB_BRIDGE; + __IO uint32_t CONFIG2_ECC_INTR_ENABLE; + __IO uint32_t CONFIG2_TEST_IN; + __IO uint32_t TEST2_OUT_READ_ADDR; + __IO uint32_t CONFIG2_PCIE_PM; + __IO uint32_t RESERVED21; + __IO uint32_t RESERVED22; + __IO uint32_t RESERVED23; + __IO uint32_t CONFIG2_PCIE_0; + __IO uint32_t CONFIG2_PCIE_1; + __IO uint32_t CONFIG2_PCIE_2; + __IO uint32_t CONFIG2_PCIE_3; + __IO uint32_t CONFIG2_BAR_SIZE_0_1; + __IO uint32_t CONFIG2_BAR_SIZE_2_3; + __IO uint32_t CONFIG2_BAR_SIZE_3_4; + __IO uint32_t RESERVED24; + __IO uint32_t RESERVED25; + __IO uint32_t TEST2_OUT_READ_DATA; + __IO uint32_t RESERVED26; + __IO uint32_t SERDESIF2_INTR_STATUS; + __IO uint32_t RESERVED27; + __IO uint32_t RESERVED28; + __IO uint32_t RESERVED29; + __IO uint32_t RESERVED30; + __IO uint32_t RESERVED31; + __IO uint32_t RESERVED32; + __IO uint32_t RESERVED33; + __IO uint32_t RESERVED34; + __IO uint32_t RESERVED35; + __IO uint32_t CONF2_AXI_MSTR_WNDW_0; + __IO uint32_t CONF2_AXI_MSTR_WNDW_1; + __IO uint32_t CONF2_AXI_MSTR_WNDW_2; + __IO uint32_t CONF2_AXI_MSTR_WNDW_3; + __IO uint32_t CONF2_AXI_SLV_WNDW_0; + __IO uint32_t CONF2_AXI_SLV_WNDW_1; + __IO uint32_t CONF2_AXI_SLV_WNDW_2; + __IO uint32_t CONF2_AXI_SLV_WNDW_3; + __IO uint32_t RESERVED36; + __IO uint32_t RESERVED37; + __IO uint32_t RESERVED38; + __IO uint32_t RESERVED39; + __IO uint32_t ADVCONFIG2; + __IO uint32_t ADVSTATUS2; + __IO uint32_t ECC_ERR_INJECT2; +} SERDES_INTF_SYSREG_TypeDef; + +/*------------------------------------------------------------------------------ + SERDES PHY registers + */ +typedef struct +{ + /** + Control register 0 + */ + __IO uint32_t CR0; + + /** + Clock count for error counter decrement + */ + __IO uint32_t ERRCNT_DEC; + + /** + Error counter threshold - Rx idle detect max latency + */ + __IO uint32_t RXIDLE_MAX_ERRCNT_THR; + + /** + Tx Impedance ratio + */ + __IO uint32_t IMPED_RATIO; + + /** + PLL F settings and PCLK ratio + */ + __IO uint32_t PLL_F_PCLK_RATIO; + + /** + PLL M & N settings + */ + __IO uint32_t PLL_M_N; + + /** + 250ns timer base count + */ + __IO uint32_t CNT250NS_MAX; + + /** + Rx Equalization amplitude ratio + */ + __IO uint32_t RE_AMP_RATIO; + + /** + Rx Equalization Cut frequency + */ + __IO uint32_t RE_CUT_RATIO; + + /** + Tx Amplitude ratio + */ + __IO uint32_t TX_AMP_RATIO; + + /** + Tx Post-Cursor ratio + */ + __IO uint32_t TX_PST_RATIO; + + /** + Tx Pre-Cursor ratio + */ + __IO uint32_t TX_PRE_RATIO; + + /** + End of calibration counter + */ + __IO uint32_t ENDCALIB_MAX; + + /** + Calibration stability counter + */ + __IO uint32_t CALIB_STABILITY_COUNT; + + /** + Power down feature + */ + __IO uint32_t POWER_DOWN; + + /** + Rx offset counter + */ + __IO uint32_t RX_OFFSET_COUNT; + + /** + PLL F settings and PCLK ratio (in PCIe 5 Gbps speed) + */ + __IO uint32_t PLL_F_PCLK_RATIO_5GBPS; + + /** + PLL M & N sttings (in PCIe 5 Gbps spped) + */ + __IO uint32_t PLL_M_N_5GBPS; + + /** + 250ns timer base count (in PCIe 5 Gbps speed) + */ + __IO uint32_t CNT250NS_MAX_5GBPS; + + /** + reserved + */ + __IO uint32_t RESERVED; + + /** + Tx Post-Cursor ratio with TxDeemp=0, Full swing + */ + __IO uint32_t TX_PST_RATIO_DEEMP0_FULL; + + /** + Tx Pre-Cursor ratio TxDeemp=0, full swing + */ + __IO uint32_t TX_PRE_RATIO_DEEMP0_FULL; + + /** + Tx Post-Cursor ratio with TxDeemp=1, Full swing + */ + __IO uint32_t TX_PST_RATIO_DEEMP1_FULL; + + /** + Tx Pre-Cursor ratio TxDeemp=1, full swing + */ + __IO uint32_t TX_PRE_RATIO_DEEMP1_FULL; + + /** + Tx Amplitude ratio TxMargin=0, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN0_FULL; + + /** + Tx Amplitude ratio TxMargin=1, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN1_FULL; + + /** + Tx Amplitude ratio TxMargin=2, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN2_FULL; + + /** + Tx Amplitude ratio TxMargin=3, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN3_FULL; + + /** + Tx Amplitude ratio TxMargin=4, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN4_FULL; + + /** + Tx Amplitude ratio TxMargin=5, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN5_FULL; + + /** + Tx Amplitude ratio TxMargin=6, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN6_FULL; + + /** + Tx Amplitude ratio TxMargin=7, full swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN7_FULL; + + /** + Rx Equalization amplitude ratio TxDeemp=0 + */ + __IO uint32_t RE_AMP_RATIO_DEEMP0; + + /** + Rx Equalization Cut frequency TxDeemp=0 + */ + __IO uint32_t RE_CUT_RATIO_DEEMP0; + + /** + Rx Equalization amplitude ratio TxDeemp=1 + */ + __IO uint32_t RE_AMP_RATIO_DEEMP1; + + /** + Rx Equalization Cut frequency TxDeemp=1 + */ + __IO uint32_t RE_CUT_RATIO_DEEMP1; + + /** + Tx Post-Cursor ratio with TxDeemp=0, Half swing + */ + __IO uint32_t TX_PST_RATIO_DEEMP0_HALF; + + /** + Tx Pre-Cursor ratio TxDeemp=0, Half swing + */ + __IO uint32_t TX_PRE_RATIO_DEEMP0_HALF; + + /** + Tx Post-Cursor ratio with TxDeemp=1, Half swing + */ + __IO uint32_t TX_PST_RATIO_DEEMP1_HALF; + + /** + Tx Pre-Cursor ratio TxDeemp=1, Half swing + */ + __IO uint32_t TX_PRE_RATIO_DEEMP1_HALF; + + /** + Tx Amplitude ratio TxMargin=0, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN0_HALF; + + /** + Tx Amplitude ratio TxMargin=1, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN1_HALF; + + /** + Tx Amplitude ratio TxMargin=2, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN2_HALF; + + /** + Tx Amplitude ratio TxMargin=3, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN3_HALF; + + /** + Tx Amplitude ratio TxMargin=4, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN4_HALF; + + /** + Tx Amplitude ratio TxMargin=5, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN5_HALF; + + /** + Tx Amplitude ratio TxMargin=6, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN6_HALF; + + /** + Tx Amplitude ratio TxMargin=7, Half swing + */ + __IO uint32_t TX_AMP_RATIO_MARGIN7_HALF; + + /** + PMA status + */ + __IO uint32_t PMA_STATUS; + + /** + Tx sweep center (RO) + */ + __IO uint32_t TX_SWEEP_CENTER; + + /** + Rx seep center (RO) + */ + __IO uint32_t RX_SWEEP_CENTER; + + /** + Rx Equalization sweep center (RO) + */ + __IO uint32_t RE_SWEEP_CENTER; + + /** + Receiver Shift Loader parameter 0 (RO) + */ + __IO uint32_t ATXDRR_7_0; + + /** + Receiver Shift Loader parameter 1 (RO) + */ + __IO uint32_t ATXDRR_14_8; + + /** + Transmitter P Shift Loader parameter0-0 + */ + __IO uint32_t ATXDRP_DYN_7_0; + + /** + Transmitter P Shift Loader parameter0-1 + */ + __IO uint32_t ATXDRP_DYN_15_8; + + /** + Transmitter P Shift Loader parameter0-2 + */ + __IO uint32_t ATXDRP_DYN_20_16; + + /** + Transmitter A Shift Loader parameter0-0 + */ + __IO uint32_t ATXDRA_DYN_7_0; + + /** + Transmitter A Shift Loader parameter0-1 + */ + __IO uint32_t ATXDRA_DYN_15_8; + + /** + Transmitter A Shift Loader parameter0-2 + */ + __IO uint32_t ATXDRA_DYN_20_16; + + /** + Transmitter T Shift Loader parameter0-0 + */ + __IO uint32_t ATXDRT_DYN_7_0; + + /** + Transmitter T Shift Loader parameter0-1 + */ + __IO uint32_t ATXDRT_DYN_15_8; + + /** + Transmitter T Shift Loader parameter0-2 + */ + __IO uint32_t ATXDRT_DYN_20_16; + + /** + Transmitter P Shift Loader parameter 1-0 (RO) + */ + __IO uint32_t ATXDRP_EI1_7_0; + + /** + Transmitter P Shift Loader parameter 1-1 (RO) + */ + __IO uint32_t ATXDRP_EI1_15_8; + + /** + Transmitter P Shift Loader parameter 1-2 (RO) + */ + __IO uint32_t ATXDRP_EI1_20_16; + + /** + Transmitter A Shift Loader parameter 1-0 (RO) + */ + __IO uint32_t ATXDRA_EI1_7_0; + + /** + Transmitter A Shift Loader parameter 1-1 (RO) + */ + __IO uint32_t ATXDRA_EI1_15_8; + + /** + Transmitter A Shift Loader parameter 1-2 (RO) + */ + __IO uint32_t ATXDRA_EI1_20_16; + + /** + Transmitter T Shift Loader parameter 1-0 (RO) + */ + __IO uint32_t ATXDRT_EI1_7_0; + + /** + Transmitter T Shift Loader parameter 1-1 (RO) + */ + __IO uint32_t ATXDRT_EI1_15_8; + + /** + Transmitter T Shift Loader parameter 1-2 (RO) + */ + __IO uint32_t ATXDRT_EI1_20_16; + + /** + Transmitter P shift Loader parameter 2-0 (RO) + */ + __IO uint32_t ATXDRP_EI2_7_0; + + /** + Transmitter P shift Loader parameter 2-1 (RO) + */ + __IO uint32_t ATXDRP_EI2_15_8; + + /** + Transmitter P shift Loader parameter 2-2 (RO) + */ + __IO uint32_t ATXDRP_EI2_20_16; + + /** + Transmitter A Shift parametr 2-0 (RO) + */ + __IO uint32_t ATXDRA_EI2_7_0; + + /** + Transmitter A Shift parametr 2-1 (RO) + */ + __IO uint32_t ATXDRA_EI2_15_8; + + /** + Transmitter A Shift parametr 2-2 (RO) + */ + __IO uint32_t ATXDRA_EI2_20_16; + + /** + Transmitter T Shift parametr 2-0 (RO) + */ + __IO uint32_t ATXDRT_EI2_7_0; + + /** + Transmitter T Shift parametr 2-1 (RO) + */ + __IO uint32_t ATXDRT_EI2_15_8; + + /** + Transmitter T Shift parametr 2-2 (RO) + */ + __IO uint32_t ATXDRT_EI2_20_16; + + /** + Override calibration register (RW) + */ + __IO uint32_t OVERRIDE_CALIB; + + /** + Force Receiver Shift Loader parameter 0 (RW) + */ + __IO uint32_t FORCE_ATXDRR_7_0; + + /** + Force Receiver Shift Loader parameter 1 (RW) + */ + __IO uint32_t FORCE_ATXDRR_15_8; + + /** + Force Receiver Shift Loader parameter 2 (RW) + */ + __IO uint32_t FORCE_ATXDRR_20_16; + + /** + Force Transmitter P Shift Loader parameter 0 (RW) + */ + __IO uint32_t FORCE_ATXDRP_7_0; + + /** + Force Transmitter P Shift Loader parameter 1 (RW) + */ + __IO uint32_t FORCE_ATXDRP_15_8; + + /** + Force Transmitter P Shift Loader parameter 2 (RW) + */ + __IO uint32_t FORCE_ATXDRP_20_16; + + /** + Force Transmitter A Shift Loader parameter 0 (RW) + */ + __IO uint32_t FORCE_ATXDRA_7_0; + + /** + Force Transmitter A Shift Loader parameter 1 (RW) + */ + __IO uint32_t FORCE_ATXDRA_15_8; + + /** + Force Transmitter A Shift Loader parameter 2 (RW) + */ + __IO uint32_t FORCE_ATXDRA_20_16; + + /** + Force Transmitter T Shift parameter 0-0 (RO) + */ + __IO uint32_t FORCE_ATXDRT_7_0; + + /** + Force Transmitter T Shift parameter 0-1 (RO) + */ + __IO uint32_t FORCE_ATXDRT_15_8; + + /** + Force Transmitter T Shift parameter 0-2 (RO) + */ + __IO uint32_t FORCE_ATXDRT_20_16; + + /** + RxD offset calibration result (RO) + */ + __IO uint32_t RXD_OFFSET_CALIB_RESULT; + + /** + RxT offset calibration result (RO) + */ + __IO uint32_t RXT_OFFSET_CALIB_RESULT; + + /** + Schmitt trigger calibration result (RO) + */ + __IO uint32_t SCHMITT_TRIG_CALIB_RESULT; + + /** + Force RxD offset calibration settings (RW) + */ + __IO uint32_t FORCE_RXD_OFFSET_CALIB; + + /** + Force RxT offset calibration settings (RW) + */ + __IO uint32_t FORCE_RXT_OFFSET_CALIB; + + /** + Force Schmitt trigger calibration settings (RW) + */ + __IO uint32_t FORCE_SCHMITT_TRIG_CALIB; + + /** + PRBS control register (RW) + */ + __IO uint32_t PRBS_CTRL; + + /** + PRBS error counter register (RO) + */ + __IO uint32_t PRBS_ERRCNT; + + /** + PHY reset override register (RW) + */ + __IO uint32_t PHY_RESET_OVERRIDE; + + /** + PHY power override register (RW) + */ + __IO uint32_t PHY_POWER_OVERRIDE; + + /** + Custom Pattern Byte 0 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_7_0; + + /** + Custom Pattern Byte 1 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_15_8; + + /** + Custom Pattern Byte 2 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_23_16; + + /** + Custom Pattern Byte 3 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_31_24; + + /** + Custom Pattern Byte 4 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_39_32; + + /** + Custom Pattern Byte 5 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_47_40; + + /** + Custom Pattern Byte 6 (RW) + */ + __IO uint32_t CUSTOM_PATTERN55_48; + + /** + Custom Pattern Byte 7 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_63_56; + + /** + Custom Pattern Byte 8 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_71_64; + + /** + Custom Pattern Byte 9 (RW) + */ + __IO uint32_t CUSTOM_PATTERN_79_72; + + /** + Custom Pattern Control (RW) + */ + __IO uint32_t CUSTOM_PATTERN_CTRL; + + /** + Custom Pattern Status register (RO) + */ + __IO uint32_t CUSTOM_PATTERN_STATUS; + + /** + PCS Loopback Control (RW) + */ + __IO uint32_t PCS_LOOPBBACK_CTRL; + + /** + Gen1 Transmit PLL Current Charge Pump (RW) + */ + __IO uint32_t GEN1_TX_PLL_CCP; + + /** + Gen1 Receive PLL Current Charge Pump (RW) + */ + __IO uint32_t GEN1_RX_PLL_CCP; + + /** + Gen2 Transmit PLL Current Charge Pump (RW) + */ + __IO uint32_t GEN2_TX_PLL_CCP; + + /** + Gen2 Receive PLL Current Charge Pump (RW) + */ + __IO uint32_t GEN2_RX_PLL_CCP; + + /** + CDR PLL manual control + */ + __IO uint32_t CDR_PLL_MANUAL_CR; + + /** + Reserved0 + */ + __IO uint32_t RESERVED0[6]; + + /** + Update settings command register + */ + __IO uint32_t UPDATE_SETTINGS; + + /** + Reserved1 + */ + __IO uint32_t RESERVED1[31]; + + /** + PRBS first error cycle counter bits [7:0] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_7_0; + + /** + PRBS first error cycle counter bits [15:8] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_15_8; + + /** + PRBS first error cycle counter bits [23:16] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_23_16; + + /** + PRBS first error cycle counter bits [31:24] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_31_24; + + /** + PRBS first error cycle counter bits [39:32] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_39_32; + + /** + PRBS first error cycle counter bits [47:40] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_47_40; + + /** + PRBS first error cycle counter bits [49:48] + */ + __IO uint32_t PRBS_ERR_CYC_FIRST_49_48; + + /** + Reserved2 + */ + __IO uint32_t RESERVED2; + + /** + PRBS last error cycle counter bits [7:0] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_7_0; + + /** + PRBS last error cycle counter bits [15:8] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_15_8; + + /** + PRBS last error cycle counter bits [23:16] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_23_16; + + /** + PRBS last error cycle counter bits [31:24] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_31_24; + + /** + PRBS last error cycle counter bits [39:32] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_39_32; + + /** + PRBS last error cycle counter bits [47:40] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_47_40; + + /** + PRBS last error cycle counter bits [49:48] + */ + __IO uint32_t PRBS_ERR_CYC_LAST_49_48; + + /** + Reserved3 + */ + __IO uint32_t RESERVED3[81]; + +} SERDES_TypeDef; + +/*-------------------------------------------------------------------------*//** + The serdesif_regs_t data structure provides access to the complete set of the + SERDES Interface hardware block configuration registers. These registers are + accessed through the APB interface of the SERDES Interface hardware block. + */ +typedef struct +{ + /** + PCIe core registers. + */ + PCIE_TypeDef core; + + /** + SERDES macro registers. + */ + SERDES_TypeDef lane[4]; + + /** + SERDESIF system registers. + */ + SERDES_INTF_SYSREG_TypeDef sys_regs; + +} SERDESIF_TypeDef; + + +/*----------------------------------------------------------------------------*/ +/*------------------------------ System Registers ----------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct +{ + __IO uint32_t ESRAM_CR; /*0X0 */ + __IO uint32_t ESRAM_MAX_LAT_CR; /*0X4 */ + __IO uint32_t DDR_CR; /*0X8 */ + __IO uint32_t ENVM_CR; /*0XC */ + __IO uint32_t ENVM_REMAP_BASE_CR; /*0X10 */ + __IO uint32_t ENVM_REMAP_FAB_CR; /*0X14 */ + __IO uint32_t CC_CR; /*0X18 */ + __IO uint32_t CC_REGION_CR; /*0X1C */ + __IO uint32_t CC_LOCK_BASE_ADDR_CR; /*0X20 */ + __IO uint32_t CC_FLUSH_INDX_CR; /*0X24 */ + __IO uint32_t DDRB_BUF_TIMER_CR; /*0X28 */ + __IO uint32_t DDRB_NB_ADDR_CR; /*0X2C */ + __IO uint32_t DDRB_NB_SIZE_CR; /*0X30 */ + __IO uint32_t DDRB_CR; /*0X34 */ + __IO uint32_t EDAC_CR; /*0X38 */ + __IO uint32_t MASTER_WEIGHT0_CR; /*0X3C */ + __IO uint32_t MASTER_WEIGHT1_CR; /*0X40 */ + __IO uint32_t SOFT_IRQ_CR; /*0X44 */ + __IO uint32_t SOFT_RST_CR; /*0X48 */ + __IO uint32_t M3_CR; /*0X4C */ + __IO uint32_t FAB_IF_CR; /*0X50 */ + __IO uint32_t LOOPBACK_CR; /*0X54 */ + __IO uint32_t GPIO_SYSRESET_SEL_CR; /*0X58 */ + __IO uint32_t GPIN_SRC_SEL_CR; /*0X5C */ + __IO uint32_t MDDR_CR; /*0X60 */ + __IO uint32_t USB_IO_INPUT_SEL_CR; /*0X64 */ + __IO uint32_t PERIPH_CLK_MUX_SEL_CR; /*0X68 */ + __IO uint32_t WDOG_CR; /*0X6C */ + __IO uint32_t MDDR_IO_CALIB_CR; /*0X70 */ + __IO uint32_t SPARE_OUT_CR; /*0X74 */ + __IO uint32_t EDAC_IRQ_ENABLE_CR; /*0X78 */ + __IO uint32_t USB_CR; /*0X7C */ + __IO uint32_t ESRAM_PIPELINE_CR; /*0X80 */ + __IO uint32_t MSS_IRQ_ENABLE_CR; /*0X84 */ + __IO uint32_t RTC_WAKEUP_CR; /*0X88 */ + __IO uint32_t MAC_CR; /*0X8C */ + __IO uint32_t MSSDDR_PLL_STATUS_LOW_CR; /*0X90 */ + __IO uint32_t MSSDDR_PLL_STATUS_HIGH_CR; /*0X94 */ + __IO uint32_t MSSDDR_FACC1_CR; /*0X98 */ + __IO uint32_t MSSDDR_FACC2_CR; /*0X9C */ + __IO uint32_t PLL_LOCK_EN_CR; /*0XA0 */ + __IO uint32_t MSSDDR_CLK_CALIB_CR; /*0XA4 */ + __IO uint32_t PLL_DELAY_LINE_SEL_CR; /*0XA8 */ + __IO uint32_t MAC_STAT_CLRONRD_CR; /*0XAC */ + __IO uint32_t RESET_SOURCE_CR; /*0XB0 */ + __I uint32_t CC_DC_ERR_ADDR_SR; /*0XB4 */ + __I uint32_t CC_IC_ERR_ADDR_SR; /*0XB8 */ + __I uint32_t CC_SB_ERR_ADDR_SR; /*0XBC */ + __I uint32_t CC_DECC_ERR_ADDR_SR; /*0XC0 */ + __I uint32_t CC_IC_MISS_CNT_SR; /*0XC4 */ + __I uint32_t CC_IC_HIT_CNT_SR; /*0XC8 */ + __I uint32_t CC_DC_MISS_CNT_SR; /*0XCC */ + __I uint32_t CC_DC_HIT_CNT_SR; /*0XD0 */ + __I uint32_t CC_IC_TRANS_CNT_SR; /*0XD4 */ + __I uint32_t CC_DC_TRANS_CNT_SR; /*0XD8 */ + __I uint32_t DDRB_DS_ERR_ADR_SR; /*0XDC */ + __I uint32_t DDRB_HPD_ERR_ADR_SR; /*0XE0 */ + __I uint32_t DDRB_SW_ERR_ADR_SR; /*0XE4 */ + __I uint32_t DDRB_BUF_EMPTY_SR; /*0XE8 */ + __I uint32_t DDRB_DSBL_DN_SR; /*0XEC */ + __I uint32_t ESRAM0_EDAC_CNT; /*0XF0 */ + __I uint32_t ESRAM1_EDAC_CNT; /*0XF4 */ + __I uint32_t CC_EDAC_CNT; /*0XF8 */ + __I uint32_t MAC_EDAC_TX_CNT; /*0XFC */ + __I uint32_t MAC_EDAC_RX_CNT; /*0X100 */ + __I uint32_t USB_EDAC_CNT; /*0X104 */ + __I uint32_t CAN_EDAC_CNT; /*0X108 */ + __I uint32_t ESRAM0_EDAC_ADR; /*0X10C */ + __I uint32_t ESRAM1_EDAC_ADR; /*0X110 */ + __I uint32_t MAC_EDAC_RX_ADR; /*0X114 */ + __I uint32_t MAC_EDAC_TX_ADR; /*0X118 */ + __I uint32_t CAN_EDAC_ADR; /*0X11C */ + __I uint32_t USB_EDAC_ADR; /*0X120 */ + __I uint32_t MM0_1_2_SECURITY; /*0X124 */ + __I uint32_t MM4_5_FIC64_SECURITY; /*0X128 */ + __I uint32_t MM3_6_7_8_SECURITY; /*0X12C */ + __I uint32_t MM9_SECURITY; /*0X130 */ + __I uint32_t M3_SR; /*0X134 */ + __I uint32_t ETM_COUNT_LOW; /*0X138 */ + __I uint32_t ETM_COUNT_HIGH; /*0X13C */ + __I uint32_t DEVICE_SR; /*0X140 */ + __I uint32_t ENVM_PROTECT_USER; /*0X144 */ + __I uint32_t ENVM_STATUS; /*0X148 */ + __I uint32_t DEVICE_VERSION; /*0X14C */ + __I uint32_t MSSDDR_PLL_STATUS; /*0X150 */ + __I uint32_t USB_SR; /*0X154 */ + __I uint32_t ENVM_SR; /*0X158 */ + __I uint32_t SPARE_IN; /*0X15C */ + __I uint32_t DDRB_STATUS; /*0X160 */ + __I uint32_t MDDR_IO_CALIB_STATUS; /*0X164 */ + __I uint32_t MSSDDR_CLK_CALIB_STATUS; /*0X168 */ + __I uint32_t WDOGLOAD; /*0X16C */ + __I uint32_t WDOGMVRP; /*0X170 */ + __I uint32_t USERCONFIG0; /*0X174 */ + __I uint32_t USERCONFIG1; /*0X178 */ + __I uint32_t USERCONFIG2; /*0X17C */ + __I uint32_t USERCONFIG3; /*0X180 */ + __I uint32_t FAB_PROT_SIZE; /*0X184 */ + __I uint32_t FAB_PROT_BASE; /*0X188 */ + __I uint32_t MSS_GPIO_DEF; /*0X18C */ + __IO uint32_t EDAC_SR; /*0X190 */ + __IO uint32_t MSS_INTERNAL_SR; /*0X194 */ + __IO uint32_t MSS_EXTERNAL_SR; /*0X198 */ + __IO uint32_t WDOGTIMEOUTEVENT; /*0X19C */ + __IO uint32_t CLR_MSS_COUNTERS; /*0X1A0 */ + __IO uint32_t CLR_EDAC_COUNTERS; /*0X1A4 */ + __IO uint32_t FLUSH_CR; /*0X1A8 */ + __IO uint32_t MAC_STAT_CLR_CR; /*0X1AC */ + __IO uint32_t IOMUXCELL_CONFIG[57]; /*0X1B0 */ + __I uint32_t NVM_PROTECT_FACTORY; /*0X294 */ + __I uint32_t DEVICE_STATUS_FIXED; /*0X298 */ + __I uint32_t MBIST_ES0; /*0X29C */ + __I uint32_t MBIST_ES1; /*0X2A0 */ + __IO uint32_t MSDDR_PLL_STAUS_1; /*0X2A4 */ + __I uint32_t REDUNDANCY_ESRAM0; /*0X2A8 */ + __I uint32_t REDUNDANCY_ESRAM1; /*0X2AC */ + __I uint32_t SERDESIF; /*0X2B0 */ + +} SYSREG_TypeDef; + +#define SYSREG_ENVM0_SOFTRESET_MASK ( (uint32_t)0x01u << 0u ) +#define SYSREG_ENVM1_SOFTRESET_MASK ( (uint32_t)0x01u << 1u ) +#define SYSREG_ESRAM0_SOFTRESET_MASK ( (uint32_t)0x01u << 2u ) +#define SYSREG_ESRAM1_SOFTRESET_MASK ( (uint32_t)0x01u << 3u ) +#define SYSREG_MAC_SOFTRESET_MASK ( (uint32_t)0x01u << 4u ) +#define SYSREG_PDMA_SOFTRESET_MASK ( (uint32_t)0x01u << 5u ) +#define SYSREG_TIMER_SOFTRESET_MASK ( (uint32_t)0x01u << 6u ) +#define SYSREG_MMUART0_SOFTRESET_MASK ( (uint32_t)0x01u << 7u ) +#define SYSREG_MMUART1_SOFTRESET_MASK ( (uint32_t)0x01u << 8u ) +#define SYSREG_SPI0_SOFTRESET_MASK ( (uint32_t)0x01u << 9u ) +#define SYSREG_SPI1_SOFTRESET_MASK ( (uint32_t)0x01u << 10u ) +#define SYSREG_I2C0_SOFTRESET_MASK ( (uint32_t)0x01u << 11u ) +#define SYSREG_I2C1_SOFTRESET_MASK ( (uint32_t)0x01u << 12u ) +#define SYSREG_CAN_SOFTRESET_MASK ( (uint32_t)0x01u << 13u ) +#define SYSREG_USB_SOFTRESET_MASK ( (uint32_t)0x01u << 14u ) +#define SYSREG_COMBLK_SOFTRESET_MASK ( (uint32_t)0x01u << 15u ) +#define SYSREG_FPGA_SOFTRESET_MASK ( (uint32_t)0x01u << 16u ) +#define SYSREG_HPDMA_SOFTRESET_MASK ( (uint32_t)0x01u << 17u ) +#define SYSREG_FIC32_0_SOFTRESET_MASK ( (uint32_t)0x01u << 18u ) +#define SYSREG_FIC32_1_SOFTRESET_MASK ( (uint32_t)0x01u << 19u ) +#define SYSREG_GPIO_SOFTRESET_MASK ( (uint32_t)0x01u << 20u ) +#define SYSREG_GPIO_7_0_SOFTRESET_MASK ( (uint32_t)0x01u << 21u ) +#define SYSREG_GPIO_15_8_SOFTRESET_MASK ( (uint32_t)0x01u << 22u ) +#define SYSREG_GPIO_23_16_SOFTRESET_MASK ( (uint32_t)0x01u << 23u ) +#define SYSREG_GPIO_31_24_SOFTRESET_MASK ( (uint32_t)0x01u << 24u ) +#define SYSREG_MDDR_SOFTRESET_MASK ( (uint32_t)0x01u << 25u ) +#define SYSREG_FIC64_SOFTRESET_MASK ( (uint32_t)0x01u << 26u ) + +/*----------------------------------------------------------------------------*/ +/*-------------------------- CoreSF2Config Registers -------------------------*/ +/*----------------------------------------------------------------------------*/ +typedef struct { + __IO uint32_t CONFIG_DONE; + __I uint32_t INIT_DONE; + __IO uint32_t CLR_INIT_DONE; + __I uint32_t CONFIG_SR; + __IO uint32_t SOFT_RESET_CR; + __I uint32_t IP_VERSION_SR; +} CoreSF2Config_TypeDef; + +/******************************************************************************/ +/* Peripheral memory map */ +/******************************************************************************/ +#define UART0_BASE 0x40000000u +#define SPI0_BASE 0x40001000u +#define I2C0_BASE 0x40002000u +#define PDMA_BASE 0x40003000u +#define TIMER_BASE 0x40004000u +#define WATCHDOG_BASE 0x40005000u +#define H2F_IRQ_CTRL_BASE 0x40006000u +#define UART1_BASE 0x40010000u +#define SPI1_BASE 0x40011000u +#define I2C1_BASE 0x40012000u +#define GPIO_BASE 0x40013000u +#define HPDMA_BASE 0x40014000u +#define CAN_BASE 0x40015000u +#define COMBLK_BASE 0x40016000u +#define RTC_BASE 0x40017000u +#define DDR0_CFG_BASE 0x40020800u +#define DDR1_CFG_BASE 0x40021000u +#define CORE_SF2_CFG_BASE 0x40022000u +#define SERDES0_CFG_BASE 0x40028000u +#define SERDES1_CFG_BASE 0x4002C000u +#define SERDES2_CFG_BASE 0x40030000u +#define SERDES3_CFG_BASE 0x40034000u +#define SYSREG_BASE 0x40038000u +#define ETHERNET_BASE 0x40041000u +#define USB_BASE 0x40043000u +#define ENVM1_BASE 0x60080000u +#define ENVM2_BASE 0x600C0000u + +/******************************************************************************/ +/* bitband address calculation macro */ +/******************************************************************************/ +#define BITBAND_ADDRESS(X) ((X & 0xF0000000U) + 0x02000000U + ((X & 0xFFFFFU) << 5)) + +/******************************************************************************/ +/* Peripheral declaration */ +/******************************************************************************/ +#define UART0 ((UART_TypeDef *) UART0_BASE) +#define SPI0 ((SPI_TypeDef *) SPI0_BASE) +#define I2C0 ((I2C_TypeDef *) I2C0_BASE) +#define I2C0_BITBAND ((I2C_BitBand_TypeDef *) BITBAND_ADDRESS(I2C0_BASE)) +#define MAC ((MAC_TypeDef *) ETHERNET_BASE) +#define PDMA ((PDMA_TypeDef *) PDMA_BASE) +#define TIMER ((TIMER_TypeDef *) TIMER_BASE) +#define TIMER_BITBAND ((TIMER_BitBand_TypeDef *) BITBAND_ADDRESS(TIMER_BASE)) +#define WATCHDOG ((WATCHDOG_TypeDef *) WATCHDOG_BASE) +#define INTERRUPT_CTRL ((INTERRUPT_CTRL_TypeDef *) H2F_IRQ_CTRL_BASE) +#define INTERRUPT_CTRL_BITBAND ((INTERRUPT_CTRL_BitBand_TypeDef *) BITBAND_ADDRESS(H2F_IRQ_CTRL_BASE)) +#define UART1 ((UART_TypeDef *) UART1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C1_BITBAND ((I2C_BitBand_TypeDef *) BITBAND_ADDRESS(I2C1_BASE)) +#define GPIO ((GPIO_TypeDef *) GPIO_BASE) +#define GPIO_BITBAND ((GPIO_BitBand_TypeDef *) BITBAND_ADDRESS(GPIO_BASE)) +#define HPDMA ((HPDMA_TypeDef *) HPDMA_BASE) +#define HPDMA_BITBAND ((HPDMA_BitBand_TypeDef *) BITBAND_ADDRESS(HPDMA_BASE)) +#define COMBLK ((COMBLK_TypeDef *) COMBLK_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define ENVM_1 ((NVM_TypeDef *) ENVM1_BASE) +#define ENVM_2 ((NVM_TypeDef *) ENVM2_BASE) +#define SYSREG ((SYSREG_TypeDef *) SYSREG_BASE) +#define MDDR ((MDDR_TypeDef *) DDR0_CFG_BASE) +#define FDDR ((FDDR_TypeDef *) DDR1_CFG_BASE) +#define USB ((MSS_USB_TypeDef *) USB_BASE) +#define SERDES0 ((SERDESIF_TypeDef *) SERDES0_CFG_BASE) +#define SERDES1 ((SERDESIF_TypeDef *) SERDES1_CFG_BASE) +#define SERDES2 ((SERDESIF_TypeDef *) SERDES2_CFG_BASE) +#define SERDES3 ((SERDESIF_TypeDef *) SERDES3_CFG_BASE) +#define CORE_SF2_CFG ((CoreSF2Config_TypeDef *) CORE_SF2_CFG_BASE) + +#ifdef __cplusplus +} +#endif + +#endif /* __SMARTFUSION2_CMSIS_PAL_H__ */ + diff --git a/bsp/smartfusion2/CMSIS/mss_assert.h b/bsp/smartfusion2/CMSIS/mss_assert.h new file mode 100644 index 0000000000000000000000000000000000000000..edec5c1609fa8df3a1be861b5d39fb237dff3763 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/mss_assert.h @@ -0,0 +1,62 @@ +/******************************************************************************* + * (c) Copyright 2009-2013 Microsemi SoC Products Group. All rights reserved. + * + * Assertion implementation. + * + * This file provides the implementation of the ASSERT macro. This file can be + * modified to cater for project specific requirements regarding the way + * assertions are handled. + * + * SVN $Revision: 6422 $ + * SVN $Date: 2014-05-14 14:37:56 +0100 (Wed, 14 May 2014) $ + */ +#ifndef __MSS_ASSERT_H_ +#define __MSS_ASSERT_H_ + +#if defined(NDEBUG) + +#define ASSERT(CHECK) + +#else /* NDEBUG */ + +#include + +#if defined ( __GNUC__ ) + +/* + * SoftConsole assertion handling + */ +#define ASSERT(CHECK) \ + do { \ + if (!(CHECK)) \ + { \ + __asm volatile ("BKPT\n\t"); \ + } \ + } while (0); + +#elif defined ( __ICCARM__ ) +/* + * IAR Embedded Workbench assertion handling. + * Call C library assert function which should result in error message + * displayed in debugger. + */ +#define ASSERT(X) assert(X) + +#else +/* + * Keil assertion handling. + * Call C library assert function which should result in error message + * displayed in debugger. + */ + +#ifndef __MICROLIB + #define ASSERT(X) assert(X) +#else + #define ASSERT(X) +#endif + +#endif /* Tool Chain */ + +#endif /* NDEBUG */ + +#endif /* __MSS_ASSERT_H_ */ diff --git a/bsp/smartfusion2/CMSIS/startup_arm/low_level_init.c b/bsp/smartfusion2/CMSIS/startup_arm/low_level_init.c new file mode 100644 index 0000000000000000000000000000000000000000..e350509927883a3146d350049c149f382b972b3d --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/low_level_init.c @@ -0,0 +1,44 @@ +/******************************************************************************* + * (c) Copyright 2014 Microsemi SoC Products Group. All rights reserved. + * + * Keil-MDK specific system initialization. + * + * SVN $Revision: 7375 $ + * SVN $Date: 2015-05-01 14:57:40 +0100 (Fri, 01 May 2015) $ + */ +#ifdef MSCC_NO_RELATIVE_PATHS +#include "m2sxxx.h" +#else +#include "..\m2sxxx.h" +#endif + +#define ENVM_BASE_ADDRESS 0x60000000U +#define MDDR_BASE_ADDRESS 0xA0000000U + +//extern unsigned int Image$$ER_RW$$Base; +//extern unsigned int Image$$ER_RO$$Base; + +/*============================================================================== + * The __low_level_init() function is called after SystemInit. Therefore, the + * external RAM should be configured at this stage if it is used. + */ +/* void low_level_init(void) +{ + volatile unsigned int rw_region_base; + volatile unsigned int readonly_region_base; + + rw_region_base = (unsigned int)&Image$$ER_RW$$Base; + if (rw_region_base >= MDDR_BASE_ADDRESS) + { + / -------------------------------------------------------------------------- + * Remap MDDR to address 0x00000000. + / + SYSREG->ESRAM_CR = 0u; + SYSREG->ENVM_REMAP_BASE_CR = 0u; + SYSREG->DDR_CR = 1u; + } + + readonly_region_base = (unsigned int)&Image$$ER_RO$$Base; + SCB->VTOR = readonly_region_base; +} */ + diff --git a/bsp/smartfusion2/CMSIS/startup_arm/retarget.c b/bsp/smartfusion2/CMSIS/startup_arm/retarget.c new file mode 100644 index 0000000000000000000000000000000000000000..229a7c0b80b01db97cf609874e6d0dc6cc1d8b66 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/retarget.c @@ -0,0 +1,150 @@ +/******************************************************************************* + * (c) Copyright 2013 Microsemi SoC Products Group. All rights reserved. + * + * Redirection of the standard library I/O to one of the SmartFusion2 + * MMUART. + * + * SVN $Revision: 7375 $ + * SVN $Date: 2015-05-01 14:57:40 +0100 (Fri, 01 May 2015) $ + */ + +/*============================================================================== + * The content of this source file will only be compiled if either one of the + * following two defined symbols are defined in the project settings: + * - MICROSEMI_STDIO_THRU_MMUART0 + * - MICROSEMI_STDIO_THRU_MMUART1 + * + */ +#ifdef MICROSEMI_STDIO_THRU_MMUART0 +#ifndef MICROSEMI_STDIO_THRU_UART +#define MICROSEMI_STDIO_THRU_UART +#endif +#endif /* MICROSEMI_STDIO_THRU_MMUART0 */ + +#ifdef MICROSEMI_STDIO_THRU_MMUART1 +#ifndef MICROSEMI_STDIO_THRU_UART +#define MICROSEMI_STDIO_THRU_UART +#endif +#endif /* MICROSEMI_STDIO_THRU_MMUART1 */ + +/*============================================================================== + * Actual implementation. + */ +#ifdef MICROSEMI_STDIO_THRU_UART + +#include +#include + +#include "m2sxxx.h" +#include "mss_uart.h" +#include "core_uart_apb.h" + + +/* + * The baud rate will default to 57600 baud if no baud rate is specified though the + * MICROSEMI_STDIO_BAUD_RATE define. + */ +#ifndef MICROSEMI_STDIO_BAUD_RATE +#define MICROSEMI_STDIO_BAUD_RATE MSS_UART_115200_BAUD +#endif + +#ifdef MICROSEMI_STDIO_THRU_MMUART0 +static mss_uart_instance_t * const gp_my_uart = &g_mss_uart0; +#else +static mss_uart_instance_t * const gp_my_uart = &g_mss_uart1; +#endif + +/*============================================================================== + * Flag used to indicate if the UART driver needs to be initialized. + */ +static int g_stdio_uart_init_done = 0; + + +#define LSR_THRE_MASK 0x20u + +/* + * Disable semihosting apis + */ +#pragma import(__use_no_semihosting_swi) + +/*============================================================================== + * sendchar() + */ +int sendchar(int ch) +{ + uint32_t tx_ready; + //µÚÒ»´Îµ÷ÓÃʱ£¬³õʼ»¯´®¿Ú + if(!g_stdio_uart_init_done) + { + MSS_UART_init(gp_my_uart, + MICROSEMI_STDIO_BAUD_RATE, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY); + g_stdio_uart_init_done = 1; + } + do { + tx_ready = gp_my_uart->hw_reg->LSR & LSR_THRE_MASK; + } while(!tx_ready); + gp_my_uart->hw_reg->THR = ch; + return (ch); +} + +/*============================================================================== + * + */ +struct __FILE { int handle; /* Add whatever you need here */ }; +FILE __stdout; +FILE __stdin; + + +/*============================================================================== + * fputc() + */ +int fputc(int ch, FILE *f) +{ + return (sendchar(ch)); +} + +/*============================================================================== + * fgetc() + */ +int fgetc(FILE *f) +{ + uint8_t rx_size; + uint8_t rx_byte; + + do { + rx_size = MSS_UART_get_rx(gp_my_uart, &rx_byte, 1); + } while(0u == rx_size); + + return rx_byte; +} + +/*============================================================================== + * ferror() + */ +int ferror(FILE *f) +{ + /* Your implementation of ferror */ + return EOF; +} + +/*============================================================================== + * _ttywrch() + */ +void _ttywrch(int ch) +{ + sendchar(ch); +} + +/*============================================================================== + * _sys_exit() + */ +void _sys_exit(int return_code) +{ + for(;;) + { + ; /* endless loop */ + } +} + +#endif /* MICROSEMI_STDIO_THRU_UART */ diff --git a/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_esram_debug.sct b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_esram_debug.sct new file mode 100644 index 0000000000000000000000000000000000000000..3d214ad675c3d011af917e2e9fd6082f212ee511 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_esram_debug.sct @@ -0,0 +1,49 @@ +;******************************************************************************* +; (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. +; SmartFusion2 scatter file for debugging code executing in internal eSRAM. +; +; SVN $Revision: 7419 $ +; SVN $Date: 2015-05-15 16:50:21 +0100 (Fri, 15 May 2015) $ +; +; * Some current (April 2015) dev kit memory map possibilities are +; * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- +; * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ +; * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ +; * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- +; * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used +; * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- +; * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- +; * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ +; * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ +; * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- +; * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ +; * --Some older physical memory map possibilities are +; * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- +; * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- +; * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ +; +; Example linker scripts use lowest practicl values so will work accross dev kits +; eNVM=256KB eRAM=64KB External memory = 64MB + +RAM_LOAD 0x20000000 0x10000 +{ + ; First half of RAM allocated to RO Execute and data + ER_RO 0x20000000 0x8000 + { + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + ; Heap size is defined in startup_m2sxxx.s + ; Heap will be added after RW data in ER_RW unless explicitly + ; allocated a meemory region in .sct file + ; Stack size is defined in startup_m2sxxx.s + ; Stack will be added after heap in ER_RW unless explicitly + ; allocated a memory region in .sct file + ; Second half of RAM allocated to RW data, heap and stack + ER_RW 0x20008000 0x8000 + { + .ANY (+RW +ZI) + } +} + diff --git a/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_execute_in_place.sct b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_execute_in_place.sct new file mode 100644 index 0000000000000000000000000000000000000000..e5663e79b5059ead9b030cf4a7c064101c66bc12 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_execute_in_place.sct @@ -0,0 +1,48 @@ +;******************************************************************************* +; (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. +; SmartFusion2 scatter file for executing code in internal eNVM. +; +; SVN $Revision: 7419 $ +; SVN $Date: 2015-05-15 16:50:21 +0100 (Fri, 15 May 2015) $ +; +; * Some current (April 2015) dev kit memory map possibilities are +; * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- +; * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ +; * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ +; * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- +; * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used +; * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- +; * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- +; * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ +; * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ +; * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- +; * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ +; * --Some older physical memory map possibilities are +; * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- +; * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- +; * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ +; +; Example linker scripts use lowest practicl values so will work accross dev kits +; eNVM=256KB eRAM=64KB External memory = 64MB + +FLASH_LOAD 0x00000000 0x40000 +{ +; All R only code/data is located in ENVM + ER_RO 0x00000000 0x40000 + { + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } +; Heap size is defined in startup_m2sxxx.s +; Heap will be added after RW data in ER_RW unless explicitly +; allocated a meemory region in .sct file +; Stack size is defined in startup_m2sxxx.s +; Stack will be added after heap in ER_RW unless explicitly +; allocated a memory region in .sct file + ER_RW 0x20000000 0x10000 + { + .ANY (+RW +ZI) + } +} + diff --git a/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_mddr_debug.sct b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_mddr_debug.sct new file mode 100644 index 0000000000000000000000000000000000000000..b2cb935927853bac46f4529885758be1661cc6eb --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_mddr_debug.sct @@ -0,0 +1,54 @@ +;******************************************************************************* +; (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. +; SmartFusion2 scatter file for debugging code executing in external MDDR. +; +; SVN $Revision: 7419 $ +; SVN $Date: 2015-05-15 16:50:21 +0100 (Fri, 15 May 2015) $ +; +; * Some current (April 2015) dev kit memory map possibilities are +; * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- +; * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ +; * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ +; * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- +; * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used +; * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- +; * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- +; * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ +; * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ +; * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- +; * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ +; * --Some older physical memory map possibilities are +; * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- +; * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- +; * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ +; +; Example linker scripts use lowest practicl values so will work accross dev kits +; eNVM=256KB eRAM=64KB External memory = 64MB + +; Extern RAM 64M in total +; allocate 1/2 to progam, 1/2 to variable data +RAM_LOAD 0x00000000 0x04000000 +{ +; Total = 64MB (lowest common amount accross dev kits) 32MB - First half of external memory allocated to RO Code + ER_RO 0x00000000 0x02000000 + { + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + ; Heap size is defined in startup_m2sxxx.s + ; Heap will be added after RW data in ER_RW unless explicitly + ; allocated a meemory region in .sct file + ; Stack size is defined in startup_m2sxxx.s + ; Stack will be added after heap in ER_RW unless explicitly + ; allocated a memory region in .sct file as is the case below + STACKS 0x20000000 UNINIT + { + startup_m2sxxx.o (STACK) + } +; 32 MB- Second half of external memory allocated to RW data + ER_RW 0xA2000000 0x02000000 + { + .ANY (+RW +ZI) + } +} diff --git a/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_relocate_to_external_ram.sct b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_relocate_to_external_ram.sct new file mode 100644 index 0000000000000000000000000000000000000000..3769a8cda3a6611b7da669181e92a24b5a0c9787 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/smartfusion2_relocate_to_external_ram.sct @@ -0,0 +1,74 @@ +;******************************************************************************* +; (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. +; SmartFusion2 scatter file for relocating code to external RAM. +; +; SVN $Revision: 7419 $ +; SVN $Date: 2015-05-15 16:50:21 +0100 (Fri, 15 May 2015) $ +; +; * Some current (April 2015) dev kit memory map possibilities are +; * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- +; * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ +; * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ +; * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- +; * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used +; * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- +; * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- +; * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ +; * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ +; * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- +; * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ +; * --Some older physical memory map possibilities are +; * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- +; * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- +; * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ +; +; Example linker scripts use lowest practicl values so will work accross dev kits +; eNVM=256KB eRAM=64KB External memory = 64MB + +FLASH_LOAD 0x60000000 0x40000 +{ +; All code required on start-up located here before relocation has occured + ER_RO 0x60000000 0x40000 + { + *.o (RESET, +First) + *(InRoot$$Sections) + startup_m2sxxx.o + system_m2sxxx.o + sys_config.o + low_level_init.o + sys_config_SERDESIF_?.o + mscc_post_hw_cfg_init.o + ecc_error_handler.o + } + ; MDDR_RAM 0xA0000000 0x4000000 + ; -MDDR is mapped to address space from 0 on startup + ; This allows the use of cache which is restriced to this area. + ; Code is copied to RAM_EXEC space on startup by boot code. + RAM_EXEC 0x00000000 0x00040000 + { + .ANY (+RO) + } + ; Heap size is defined in startup_m2sxxx.s + ; Heap will be added after RW data in ER_RW unless explicitly + ; allocated a meemory region in .sct file + ; Stack size is defined in startup_m2sxxx.s + ; Stack will be added after heap in ER_RW unless explicitly + ; allocated a memory region in .sct file as is the case below + STACKS 0x20000000 UNINIT + { + startup_m2sxxx.o (STACK) + } +; All internal RAM has been allocatd to the stack +; INTERNAL_RAM 0x20008000 0x10000 +; { +; .ANY (+RW +ZI) +; } + +; MDDR_RAM 0xA0000000 0x4000000 So use top half of this for RW data +; Bottom half has been assigned to R only code already + ER_RW 0xA2000000 0x2000000 + { + .ANY (+RW +ZI) + } +} + diff --git a/bsp/smartfusion2/CMSIS/startup_arm/startup_m2sxxx.s b/bsp/smartfusion2/CMSIS/startup_arm/startup_m2sxxx.s new file mode 100644 index 0000000000000000000000000000000000000000..5419b25cf8f038882fdc6e190771958ee4e536aa --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_arm/startup_m2sxxx.s @@ -0,0 +1,586 @@ +;******************************************************************************* +; (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. +; SmartFusion2 startup code for Keil-MDK. +; +; SmartFusion2 vector table and startup code for ARM tool chain. +; +; SVN $Revision: 7419 $ +; SVN $Date: 2015-05-15 16:50:21 +0100 (Fri, 15 May 2015) $ +; + +; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------ + + +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00001000 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +stack_start +Stack_Mem SPACE Stack_Size +__initial_sp +stack_end + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + + PRESERVE8 + THUMB + + +;=============================================================================== +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WdogWakeup_IRQHandler + DCD RTC_Wakeup_IRQHandler + DCD SPI0_IRQHandler + DCD SPI1_IRQHandler + DCD I2C0_IRQHandler + DCD I2C0_SMBAlert_IRQHandler + DCD I2C0_SMBus_IRQHandler + DCD I2C1_IRQHandler + DCD I2C1_SMBAlert_IRQHandler + DCD I2C1_SMBus_IRQHandler + DCD UART0_IRQHandler + DCD UART1_IRQHandler + DCD EthernetMAC_IRQHandler + DCD DMA_IRQHandler + DCD Timer1_IRQHandler + DCD Timer2_IRQHandler + DCD CAN_IRQHandler + DCD ENVM0_IRQHandler + DCD ENVM1_IRQHandler + DCD ComBlk_IRQHandler + DCD USB_IRQHandler + DCD USB_DMA_IRQHandler + DCD PLL_Lock_IRQHandler + DCD PLL_LockLost_IRQHandler + DCD CommSwitchError_IRQHandler + DCD CacheError_IRQHandler + DCD DDR_IRQHandler + DCD HPDMA_Complete_IRQHandler + DCD HPDMA_Error_IRQHandler + DCD ECC_Error_IRQHandler + DCD MDDR_IOCalib_IRQHandler + DCD FAB_PLL_Lock_IRQHandler + DCD FAB_PLL_LockLost_IRQHandler + DCD FIC64_IRQHandler + DCD FabricIrq0_IRQHandler + DCD FabricIrq1_IRQHandler + DCD FabricIrq2_IRQHandler + DCD FabricIrq3_IRQHandler + DCD FabricIrq4_IRQHandler + DCD FabricIrq5_IRQHandler + DCD FabricIrq6_IRQHandler + DCD FabricIrq7_IRQHandler + DCD FabricIrq8_IRQHandler + DCD FabricIrq9_IRQHandler + DCD FabricIrq10_IRQHandler + DCD FabricIrq11_IRQHandler + DCD FabricIrq12_IRQHandler + DCD FabricIrq13_IRQHandler + DCD FabricIrq14_IRQHandler + DCD FabricIrq15_IRQHandler + DCD GPIO0_IRQHandler + DCD GPIO1_IRQHandler + DCD GPIO2_IRQHandler + DCD GPIO3_IRQHandler + DCD GPIO4_IRQHandler + DCD GPIO5_IRQHandler + DCD GPIO6_IRQHandler + DCD GPIO7_IRQHandler + DCD GPIO8_IRQHandler + DCD GPIO9_IRQHandler + DCD GPIO10_IRQHandler + DCD GPIO11_IRQHandler + DCD GPIO12_IRQHandler + DCD GPIO13_IRQHandler + DCD GPIO14_IRQHandler + DCD GPIO15_IRQHandler + DCD GPIO16_IRQHandler + DCD GPIO17_IRQHandler + DCD GPIO18_IRQHandler + DCD GPIO19_IRQHandler + DCD GPIO20_IRQHandler + DCD GPIO21_IRQHandler + DCD GPIO22_IRQHandler + DCD GPIO23_IRQHandler + DCD GPIO24_IRQHandler + DCD GPIO25_IRQHandler + DCD GPIO26_IRQHandler + DCD GPIO27_IRQHandler + DCD GPIO28_IRQHandler + DCD GPIO29_IRQHandler + DCD GPIO30_IRQHandler + DCD GPIO31_IRQHandler + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + +;=============================================================================== +; Reset Handler +; + AREA |.text|, CODE, READONLY + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + ; IMPORT low_level_init + IMPORT __main + + ;--------------------------------------------------------------- + ; Initialize stack RAM content to initialize the error detection + ; and correction (EDAC). This is done if EDAC is enabled for the + ; eSRAM blocks or the ECC/SECDED is enabled for the MDDR. + ; Register R11 is used to keep track of the RAM intialization + ; decision outcome for later use for heap RAM initialization at + ; the end of the startup code. + ; Please note that the stack has to be located in eSRAM at this + ; point and cannot be located in MDDR since MDDR is not available + ; at this point. + ; The bits of the content of register R11 have the foolwing + ; meaning: + ; reg11[0]: eSRAM EDAC enabled + ; reg11[1]: MDDR ECC/SECDED enabled + ; + MOV R11, #0 + LDR R0, SF2_MDDR_MODE_CR + LDR R0, [R0] + LDR R1, SF2_EDAC_CR + LDR R1, [R1] + AND R1, R1, #3 + AND R0, R0, #0x1C + CMP R0, #0x14 + BNE check_esram_edac + ORR R11, R11, #2 +check_esram_edac + CMP R1, #0 + BEQ check_stack_init + ORR R11, R11, #1 +check_stack_init + CMP R11, #0 + BEQ call_system_init +clear_stack + LDR R0, =stack_start + LDR R1, =stack_end + LDR R2, RAM_INIT_PATTERN + BL fill_memory ; fill_memory takes r0 - r2 as arguments uses r4, r5, r6, r7, r8, r9, and does not preserve contents */ + + ;--------------------------------------------------------------- + ; Call SystemInit() to perform Libero specified configuration. + ; +call_system_init + LDR R0, =SystemInit + BLX R0 + ; LDR R0, =low_level_init + ; BLX R0 + + ;--------------------------------------------------------------- + ; Modify MDDR configuration if ECC/SECDED is enabled for MDDR. + ; Enable write combining on MDDR bridge, disable non-bufferable + ; regions. + ; +adjust_mddr_cfg + AND R10, R11, #0x2 + CMP R10, #0 + BEQ branch_to_main + LDR R0, SF2_DDRB_NB_SIZE + LDR R1, SF2_DDRB_CR + LDR R2, [R0] + LDR R3, [R1] + push {R0, R1, R2, R3} + MOV R2, #0 + MOV R3, #0xFF + STR R2, [R0] + STR R3, [R1] + + ; -------------------------------------------------------------- + ; Initialize heap RAM content to initialize the error detection + ; and correction (EDAC). We use the decision made earlier in the + ; startup code of whether or not the stack RAM should be + ; initialized. This decision is held in register R11. A non-zero + ; value indicates that the RAM content should be initialized. + ; +clear_heap + CMP R11, #0 + BEQ branch_to_main + LDR R0, =__heap_base + LDR R1, =__heap_limit + LDR R2, HEAP_INIT_PATTERN + BL fill_memory ; fill_memory takes r0 - r2 as arguments uses r4, r5, r6, r7, r8, r9, and does not preserve contents */ + + ;--------------------------------------------------------------- + ; Branch to __main + ; +branch_to_main + LDR R0, =__main + BX R0 + ENDP + +SF2_EDAC_CR DCD 0x40038038 +SF2_DDRB_NB_SIZE DCD 0x40038030 +SF2_DDRB_CR DCD 0x40038034 +SF2_MDDR_MODE_CR DCD 0x40020818 +RAM_INIT_PATTERN DCD 0x00000000 +HEAP_INIT_PATTERN DCD 0x00000000 + +;------------------------------------------------------------------------------ +; * fill_memory. +; * @brief Fills memory with Pattern contained in r2 +; * This routine uses the stmne instruction to copy 4 words at a time which is very efficient +; * The instruction can only write to word aligned memory, hence the code at the start and end of this routine +; * to handle possible unaligned bytes at start and end. +; * +; * @param param1 r0: start address +; * @param param2 r1: end address +; * @param param3 r2: FILL PATTETN +; * +; * @note note: Most efficient if memory aligned. Linker ALIGN(4) command +; * should be used as per example linker scripts +; * Stack is not used in this routine +; * register contents r4, r5, r6, r7, r8, r9, will are used and will be returned undefined +; * @return none - Used Registers are not preserved +; */ + +fill_memory PROC + ;push {r4, r5, r6, r7, r8, r9, lr} We will not use stack as may be not available */ + cmp r0, r1 + beq fill_memory_exit ; Exit early if source and destination the same */ + ; copy non-aligned bytes at the start */ + and.w r6, r0, #3 ; see if non-alaigned bytes at the start */ + cmp r6, #0 + beq fill_memory_end_start ; no spare bytes at start, continue */ + mov r5, #4 + sub.w r4, r5, r6 ; now have number of non-aligned bytes in r4 */ + mov r7, #8 + mul r8, r7, r6 ; calculate number of shifts required to initalise pattern for non-aligned bytes */ + mov r9, r2 ; copy pattern */ + ror r9, r9, r8 ; Rotate right to keep pattern consistent */ +fill_memory_spare_bytes_start ; From above, R0 contains source address, R1 contains destination address */ + cmp r4, #0 ; no spare bytes at end- end now */ + beq fill_memory_end_start + strb r9, [r0] ; fill byte */ + ror.w r9, r9, r7 ; Rotate right by one byte for the next time, to keep pattern consistent */ + add r0, r0, #1 ; add one to address */ + subs r4, r4, #1 ; subtract one from byte count 1 */ + b fill_memory_spare_bytes_start +fill_memory_end_start + mov r6, #0 + mov r7, r1 ; save end address */ + subs r1, r1, r0 ; Calculate number of bytes to fill */ + mov r8,r1 ; Save copy of byte count */ + asrs r1,r1, #4 ; Div by 16 to get number of chunks to move */ + mov r9, r2 ; copy pattern */ + mov r4, r2 ; copy pattern */ + mov r5, r2 ; copy pattern */ + cmp r1, r6 ; compare to see if all chunks copied */ + beq fill_memory_spare_bytes_end +fill_memory_loop + it ne + stmne r0!, {r2, r4, r5, r9} ; copy pattern- note: stmne instruction must me word aligned (address in r0) */ + add.w r6, r6, #1 ; use Thumb2- make sure condition code reg. not updated */ + cmp r1, r6 ; compare to see if all chunks copied */ + bne fill_memory_loop +fill_memory_spare_bytes_end ; copy spare bytes at the end if any */ + and.w r8, r8, #15 ; get spare bytes --check can you do an ands? */ +fill_memory_spare_end_loop ; From above, R0 contains source address, R1 contains destination address */ + cmp r8, #0 ; no spare bytes at end- end now */ + beq fill_memory_exit + strb r2, [r0] + ror.w r2, r2, #8 ; Rotate right by one byte for the next time, to keep pattern consistent */ + add r0, r0, #1 ; add one to address */ + subs r8, r8, #1 ; subtract one from byte count 1 */ + b fill_memory_spare_end_loop +fill_memory_exit + bx lr ; We will not use pop as stack may be not available */ + ENDP + + + +;=============================================================================== +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WdogWakeup_IRQHandler [WEAK] + EXPORT RTC_Wakeup_IRQHandler [WEAK] + EXPORT SPI0_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT I2C0_IRQHandler [WEAK] + EXPORT I2C0_SMBAlert_IRQHandler [WEAK] + EXPORT I2C0_SMBus_IRQHandler [WEAK] + EXPORT I2C1_IRQHandler [WEAK] + EXPORT I2C1_SMBAlert_IRQHandler [WEAK] + EXPORT I2C1_SMBus_IRQHandler [WEAK] + EXPORT UART0_IRQHandler [WEAK] + EXPORT UART1_IRQHandler [WEAK] + EXPORT EthernetMAC_IRQHandler [WEAK] + EXPORT DMA_IRQHandler [WEAK] + EXPORT Timer1_IRQHandler [WEAK] + EXPORT Timer2_IRQHandler [WEAK] + EXPORT CAN_IRQHandler [WEAK] + EXPORT ENVM0_IRQHandler [WEAK] + EXPORT ENVM1_IRQHandler [WEAK] + EXPORT ComBlk_IRQHandler [WEAK] + EXPORT USB_IRQHandler [WEAK] + EXPORT USB_DMA_IRQHandler [WEAK] + EXPORT PLL_Lock_IRQHandler [WEAK] + EXPORT PLL_LockLost_IRQHandler [WEAK] + EXPORT CommSwitchError_IRQHandler [WEAK] + EXPORT CacheError_IRQHandler [WEAK] + EXPORT DDR_IRQHandler [WEAK] + EXPORT HPDMA_Complete_IRQHandler [WEAK] + EXPORT HPDMA_Error_IRQHandler [WEAK] + EXPORT ECC_Error_IRQHandler [WEAK] + EXPORT MDDR_IOCalib_IRQHandler [WEAK] + EXPORT FAB_PLL_Lock_IRQHandler [WEAK] + EXPORT FAB_PLL_LockLost_IRQHandler [WEAK] + EXPORT FIC64_IRQHandler [WEAK] + EXPORT FabricIrq0_IRQHandler [WEAK] + EXPORT FabricIrq1_IRQHandler [WEAK] + EXPORT FabricIrq2_IRQHandler [WEAK] + EXPORT FabricIrq3_IRQHandler [WEAK] + EXPORT FabricIrq4_IRQHandler [WEAK] + EXPORT FabricIrq5_IRQHandler [WEAK] + EXPORT FabricIrq6_IRQHandler [WEAK] + EXPORT FabricIrq7_IRQHandler [WEAK] + EXPORT FabricIrq8_IRQHandler [WEAK] + EXPORT FabricIrq9_IRQHandler [WEAK] + EXPORT FabricIrq10_IRQHandler [WEAK] + EXPORT FabricIrq11_IRQHandler [WEAK] + EXPORT FabricIrq12_IRQHandler [WEAK] + EXPORT FabricIrq13_IRQHandler [WEAK] + EXPORT FabricIrq14_IRQHandler [WEAK] + EXPORT FabricIrq15_IRQHandler [WEAK] + EXPORT GPIO0_IRQHandler [WEAK] + EXPORT GPIO1_IRQHandler [WEAK] + EXPORT GPIO2_IRQHandler [WEAK] + EXPORT GPIO3_IRQHandler [WEAK] + EXPORT GPIO4_IRQHandler [WEAK] + EXPORT GPIO5_IRQHandler [WEAK] + EXPORT GPIO6_IRQHandler [WEAK] + EXPORT GPIO7_IRQHandler [WEAK] + EXPORT GPIO8_IRQHandler [WEAK] + EXPORT GPIO9_IRQHandler [WEAK] + EXPORT GPIO10_IRQHandler [WEAK] + EXPORT GPIO11_IRQHandler [WEAK] + EXPORT GPIO12_IRQHandler [WEAK] + EXPORT GPIO13_IRQHandler [WEAK] + EXPORT GPIO14_IRQHandler [WEAK] + EXPORT GPIO15_IRQHandler [WEAK] + EXPORT GPIO16_IRQHandler [WEAK] + EXPORT GPIO17_IRQHandler [WEAK] + EXPORT GPIO18_IRQHandler [WEAK] + EXPORT GPIO19_IRQHandler [WEAK] + EXPORT GPIO20_IRQHandler [WEAK] + EXPORT GPIO21_IRQHandler [WEAK] + EXPORT GPIO22_IRQHandler [WEAK] + EXPORT GPIO23_IRQHandler [WEAK] + EXPORT GPIO24_IRQHandler [WEAK] + EXPORT GPIO25_IRQHandler [WEAK] + EXPORT GPIO26_IRQHandler [WEAK] + EXPORT GPIO27_IRQHandler [WEAK] + EXPORT GPIO28_IRQHandler [WEAK] + EXPORT GPIO29_IRQHandler [WEAK] + EXPORT GPIO30_IRQHandler [WEAK] + EXPORT GPIO31_IRQHandler [WEAK] + + +WdogWakeup_IRQHandler +RTC_Wakeup_IRQHandler +SPI0_IRQHandler +SPI1_IRQHandler +I2C0_IRQHandler +I2C0_SMBAlert_IRQHandler +I2C0_SMBus_IRQHandler +I2C1_IRQHandler +I2C1_SMBAlert_IRQHandler +I2C1_SMBus_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +EthernetMAC_IRQHandler +DMA_IRQHandler +Timer1_IRQHandler +Timer2_IRQHandler +CAN_IRQHandler +ENVM0_IRQHandler +ENVM1_IRQHandler +ComBlk_IRQHandler +USB_IRQHandler +USB_DMA_IRQHandler +PLL_Lock_IRQHandler +PLL_LockLost_IRQHandler +CommSwitchError_IRQHandler +CacheError_IRQHandler +DDR_IRQHandler +HPDMA_Complete_IRQHandler +HPDMA_Error_IRQHandler +ECC_Error_IRQHandler +MDDR_IOCalib_IRQHandler +FAB_PLL_Lock_IRQHandler +FAB_PLL_LockLost_IRQHandler +FIC64_IRQHandler +FabricIrq0_IRQHandler +FabricIrq1_IRQHandler +FabricIrq2_IRQHandler +FabricIrq3_IRQHandler +FabricIrq4_IRQHandler +FabricIrq5_IRQHandler +FabricIrq6_IRQHandler +FabricIrq7_IRQHandler +FabricIrq8_IRQHandler +FabricIrq9_IRQHandler +FabricIrq10_IRQHandler +FabricIrq11_IRQHandler +FabricIrq12_IRQHandler +FabricIrq13_IRQHandler +FabricIrq14_IRQHandler +FabricIrq15_IRQHandler +GPIO0_IRQHandler +GPIO1_IRQHandler +GPIO2_IRQHandler +GPIO3_IRQHandler +GPIO4_IRQHandler +GPIO5_IRQHandler +GPIO6_IRQHandler +GPIO7_IRQHandler +GPIO8_IRQHandler +GPIO9_IRQHandler +GPIO10_IRQHandler +GPIO11_IRQHandler +GPIO12_IRQHandler +GPIO13_IRQHandler +GPIO14_IRQHandler +GPIO15_IRQHandler +GPIO16_IRQHandler +GPIO17_IRQHandler +GPIO18_IRQHandler +GPIO19_IRQHandler +GPIO20_IRQHandler +GPIO21_IRQHandler +GPIO22_IRQHandler +GPIO23_IRQHandler +GPIO24_IRQHandler +GPIO25_IRQHandler +GPIO26_IRQHandler +GPIO27_IRQHandler +GPIO28_IRQHandler +GPIO29_IRQHandler +GPIO30_IRQHandler +GPIO31_IRQHandler + B . + + ENDP + +mscc_post_hw_cfg_init PROC + EXPORT mscc_post_hw_cfg_init [WEAK] + BX LR + ENDP + + ALIGN + + +;=============================================================================== +; User Initial Stack & Heap + + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + + END diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-envm.ld b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-envm.ld new file mode 100644 index 0000000000000000000000000000000000000000..547f2865a82e4dbb5ab20916b3ad3f3a32b51c5d --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-envm.ld @@ -0,0 +1,249 @@ +/******************************************************************************* + * (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. + * + * file name : debug-in-microsemi-smartfusion2-envm.ld + * SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable + * debug image executing in SmartFusion2 internal eNVM. + * + * Some current (April 2015) dev kit memory map possibilities are + * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- + * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ + * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ + * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- + * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used + * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- + * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- + * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ + * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ + * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- + * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ + * --Some older physical memory map possibilities are + * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- + * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- + * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ + * + * Example linker scripts use lowest practicl values so will work accross dev kits + * eNVM=256KB eRAM=64KB External memory = 64MB + * + * On reset, the eNVM region is mapped to 0x00000000 + * This is changed below by setting the __smartfusion2_memory_remap variable as required. + * Options are detailed below. + * + * SVN $Revision: 7419 $ + * SVN $Date: 2015-05-15 21:20:21 +0530 (Fri, 15 May 2015) $ + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +GROUP(-lc -lgcc -lm) +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) +SEARCH_DIR(.) +__DYNAMIC = 0; + +/******************************************************************************* + * Start of board customization. + *******************************************************************************/ +MEMORY +{ + /* + * In general, example LD scripts use lowest common memory footprint + * so will work with all devices. + */ + /* + * WARNING: The words "SOFTCONSOLE", "FLASH", and "USE", the colon ":", and + * the name of the type of flash memory are all in a specific order. + * Please do not modify that comment line, in order to ensure + * debugging of your application will use the flash memory correctly. + */ + + /* SOFTCONSOLE FLASH USE: microsemi-smartfusion2-envm */ + rom (rx) : ORIGIN = 0x60000000, LENGTH = 256k + + /* SmartFusion2 internal eNVM mirrored to 0x00000000 */ + romMirror (rx) : ORIGIN = 0x00000000, LENGTH = 256k + + /* SmartFusion2 internal eSRAM */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k +} + +RAM_START_ADDRESS = 0x20000000; /* Must be the same value MEMORY region ram ORIGIN above. */ +RAM_SIZE = 64k; /* Must be the same value MEMORY region ram LENGTH above. */ +MAIN_STACK_SIZE = 4k; /* Cortex main stack size. */ +MIN_SIZE_HEAP = 4k; /* needs to be calculated for your application */ + +/******************************************************************************* + * End of board customization. + *******************************************************************************/ + +PROVIDE (__main_stack_start = RAM_START_ADDRESS + RAM_SIZE); +PROVIDE (_estack = __main_stack_start); +PROVIDE (__mirrored_nvm = 1); /* Indicate to startup code that NVM is mirrored to VMA address and no text copy is required. */ + +/* + * Remap instruction for startup code and debugger. + * set __smartfusion2_memory_remap to one of the following: + * 0: remap eNVM to address 0x00000000 Production mode or debugging from eNVM + * 1: remap eSRAM to address 0x00000000 Debugging from eSRAM + * 2: remap external DDR memory to address 0x00000000 Debugging from DDR memory + */ +PROVIDE (__smartfusion2_memory_remap = 0); + +SECTIONS +{ + .vector_table : ALIGN(0x10) + { + __vector_table_load = LOADADDR(.vector_table); + __vector_table_start = .; + __vector_table_vma_base_address = .; /* required by debugger for start address */ + KEEP(*(.isr_vector)) + . = ALIGN(0x10); + _evector_table = .; + } >romMirror AT>rom + + /* all data and code run/used before reloaction must be located here */ + /* When all code in NVRAM, no requirement for this section- but adds clarity when looking at .lst file */ + .boot_code : ALIGN(0x10) + { + *(.boot_code) /* reset handler */ + *system_m2sxxx.o(.text*) /* SystemInit() - called before relocation to RAM so keep in ROM */ + *sys_config.o(.rodata*) + . = ALIGN(0x10); + } >romMirror AT>rom + + .text : ALIGN(0x10) + { + CREATE_OBJECT_SYMBOLS + __text_load = LOADADDR(.text); /* required when copying to RAM */ + __text_start = .; /* required when copying to RAM */ + *(.text .text.* .gnu.linkonce.t.*) + *(.plt) + *(.gnu.warning) + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) + + . = ALIGN(4); + /* These are for running static constructors and destructors under ELF. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + *(.rodata .rodata.* .gnu.linkonce.r.*) + + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.gcc_except_table) + *(.eh_frame_hdr) + *(.eh_frame) + + KEEP (*(.vector_table)) + KEEP (*(.init)) + KEEP (*(.fini)) + + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(0x10); + } >romMirror AT>rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } >ram AT>rom + __exidx_end = .; + _etext = .; /* required when copying to RAM */ + + .data : ALIGN(0x10) + { + __data_load = LOADADDR(.data); /* used when copying to RAM */ + _sidata = LOADADDR (.data); + __data_start = .; /* used when copying to RAM */ + _sdata = .; + KEEP(*(.jcr)) + *(.got.plt) *(.got) + *(.shdata) + *(.data .data.* .gnu.linkonce.d.*) + . = ALIGN (0x10); + _edata = .; /* used when copying to RAM */ + } >ram AT>rom + + .bss : ALIGN(0x10) + { + __bss_start__ = . ; + _sbss = .; + *(.shbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(0x10); + __bss_end__ = .; + _end = .; + __end = _end; + _ebss = .; + PROVIDE(end = .); + } >ram AT>rom + + .heap : ALIGN(0x10) + { + __heap_start__ = .; + . += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */ + . += ((ABSOLUTE(RAM_START_ADDRESS) + RAM_SIZE - MAIN_STACK_SIZE) - .); /* assumes stack starts after heap */ + _eheap = .; + } >ram + + .stack : ALIGN(0x10) + { + __stack_start__ = .; + . += MAIN_STACK_SIZE; + _estack = .; + } >ram + + .stab 0 (NOLOAD) : + { + *(.stab) + } + + .stabstr 0 (NOLOAD) : + { + *(.stabstr) + } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } + .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) } + /DISCARD/ : { *(.note.GNU-stack) } +} diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-esram.ld b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-esram.ld new file mode 100644 index 0000000000000000000000000000000000000000..4bddc864198d5c18c6db0de8e807eb719a59011a --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-esram.ld @@ -0,0 +1,248 @@ +/******************************************************************************* + * (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. + * + * file name : debug-in-microsemi-smartfusion2-esram.ld + * SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable + * debug image executing in SmartFusion2 internal eSRAM. + * + * Some current (April 2015) dev kit memory map possibilities are + * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- + * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ + * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ + * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- + * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used + * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- + * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- + * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ + * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ + * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- + * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ + * --Some older physical memory map possibilities are + * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- + * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- + * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ + * + * Example linker scripts use lowest practicl values so will work accross dev kits + * eNVM=256KB eRAM=64KB External memory = 64MB + * + * On reset, the eNVM region is mapped to 0x00000000 + * This is changed below by setting the __smartfusion2_memory_remap variable as required. + * Options are detailed below. + * + * SVN $Revision: 7478 $ + * SVN $Date: 2015-06-18 21:48:18 +0530 (Thu, 18 Jun 2015) $ + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +GROUP(-lc -lgcc -lm) +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) +SEARCH_DIR(.) +__DYNAMIC = 0; + +/******************************************************************************* + * Start of board customization. + *******************************************************************************/ +MEMORY +{ + /* + * In general, example LD scripts use lowest common memory footprint + * so will work with all devices. + */ + /* + * WARNING: The words "SOFTCONSOLE", "FLASH", and "USE", the colon ":", and + * the name of the type of flash memory are all in a specific order. + * Please do not modify that comment line, in order to ensure + * debugging of your application will use the flash memory correctly. + */ + /* SmartFusion2 internal eSRAM */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k +} + +RAM_START_ADDRESS = 0x20000000; /* Must be the same value MEMORY region ram ORIGIN above. */ +RAM_SIZE = 64k; /* Must be the same value MEMORY region ram LENGTH above. */ +MAIN_STACK_SIZE = 4k; /* Cortex main stack size. */ +MIN_SIZE_HEAP = 4k; /* needs to be calculated for your application */ + +/* Please note that unassigned RAM will be allocated to the .heap section. */ + +/******************************************************************************* + * End of board customization. + *******************************************************************************/ + +PROVIDE (__main_stack_start = RAM_START_ADDRESS + RAM_SIZE); +PROVIDE (_estack = __main_stack_start); +PROVIDE (__mirrored_nvm = 0); /* Indicate to startup code that NVM is not mirrored to VMA address .text copy is required. */ + + /* + * Remap instruction for start-up code and debugger. + * set __smartfusion2_memory_remap to one of the following: + * 0: remap eNVM to address 0x00000000 Production mode or debugging from eNVM + * 1: remap eSRAM to address 0x00000000 See note 1 below. + * 2: remap external DDR memory to address 0x00000000 Debugging from or production relocate to DDR memory + * note 1: This option should only be used in production mode if required. When debugging using eSRAM, code is not + * relocated and __smartfusion2_memory_remap should be set to option 0. In revision 7419 and below of + * this file, __smartfusion2_memory_remap was set to option 1. This remap was not required and could lead to an issue + * when displaying some invalid memory locations in the debugger using some Libero designs. + * + */ + +PROVIDE (__smartfusion2_memory_remap = 0); + +SECTIONS +{ + .vector_table : ALIGN(0x10) + { + __vector_table_load = LOADADDR(.vector_table); + __vector_table_start = .; + __vector_table_vma_base_address = .; + KEEP(*(.isr_vector)) + . = ALIGN(0x10); + _evector_table = .; + } >ram + + .boot_code : ALIGN(0x10) /* When all code in RAM, no requirement for this section- but adds clarity when looking at .lst file */ + { + *(.boot_code) + . = ALIGN(0x10); + } >ram + + .text : + ALIGN(0x10) + { + CREATE_OBJECT_SYMBOLS + __text_load = LOADADDR(.text); + __text_start = .; + *(.text .text.* .gnu.linkonce.t.*) + *(.plt) + *(.gnu.warning) + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) + + . = ALIGN(0x4); + /* These are for running static constructors and destructors under ELF. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + *(.rodata .rodata.* .gnu.linkonce.r.*) + + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.gcc_except_table) + *(.eh_frame_hdr) + *(.eh_frame) + + KEEP (*(.vector_table)) + KEEP (*(.init)) + KEEP (*(.fini)) + + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(0x10); + } >ram + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } >ram + __exidx_end = .; + _etext = .; + PROVIDE(__text_end = .); + + .data : + ALIGN(0x10) + { + __data_load = LOADADDR (.data); + _sidata = LOADADDR (.data); + __data_start = .; + _sdata = .; + KEEP(*(.jcr)) + *(.got.plt) *(.got) + *(.shdata) + *(.data .data.* .gnu.linkonce.d.*) + . = ALIGN(0x10); + _edata = .; + } >ram + + .bss : ALIGN(0x10) + { + __bss_start__ = . ; + _sbss = .; + *(.shbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(0x10); + __bss_end__ = .; + _end = .; + __end = _end; + _ebss = .; + PROVIDE(end = .); + } >ram + + .heap : ALIGN(0x10) + { + __heap_start__ = .; + . += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */ + . += ((ABSOLUTE(RAM_START_ADDRESS) + RAM_SIZE - MAIN_STACK_SIZE) - .); /* assumes stack starts after heap */ + _eheap = .; + } >ram + + .stack : ALIGN(0x10) + { + __stack_start__ = .; + . += MAIN_STACK_SIZE; + _estack = .; + } >ram + + .stab 0 (NOLOAD) : + { + *(.stab) + } + + .stabstr 0 (NOLOAD) : + { + *(.stabstr) + } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } + .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) } + /DISCARD/ : { *(.note.GNU-stack) *(.isr_vector) } +} diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-external-ram.ld b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-external-ram.ld new file mode 100644 index 0000000000000000000000000000000000000000..605623aeb032df748018e9dafb5024154f8d269f --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-external-ram.ld @@ -0,0 +1,238 @@ +/******************************************************************************* + * (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. + * + * file name : debug-in-microsemi-smartfusion2-external-ram.ld + * SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable + * debug image executing in external eRAM. + * + * Some current (April 2015) dev kit memory map possibilities are + * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- + * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ + * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ + * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- + * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used + * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- + * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- + * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ + * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ + * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- + * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ + * --Some older physical memory map possibilities are + * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- + * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- + * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ + * + * Example linker scripts use lowest practical values so will work accross dev kits + * eNVM=256KB eRAM=64KB External memory = 64MB + * + * On reset, the eNVM region is mapped to 0x00000000 + * This is changed below by setting the __smartfusion2_memory_remap variable as required. + * Options are detailed below. + * + * SVN $Revision: 7419 $ + * SVN $Date: 2015-05-15 21:20:21 +0530 (Fri, 15 May 2015) $ + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +GROUP(-lc -lgcc -lm) +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) +SEARCH_DIR(.) +__DYNAMIC = 0; + +/******************************************************************************* + * Start of board customization. + *******************************************************************************/ +MEMORY +{ + /* + * In general, example LD scripts use lowest common memory footprint + * accross dev boards so will work with all devices. Currently this is 64MB + * Program and data space is split evenly in this example 32MB each + */ + /* SmartFusion2 internal eSRAM */ + esram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k + + /* SmartFusion2 development board external RAM */ + external_ram (rwx) : ORIGIN = 0x00000000, LENGTH = 32m + + /* External MDDR RAM used for data section. */ + /* Must be enough room allocated for data section between 0xA0000000 and data_external_ram */ + data_external_ram (rw) : ORIGIN = 0xA2000000, LENGTH = 32m +} + +ESRAM_START_ADDRESS = 0x20000000; /* Must be the same value MEMORY region ram ORIGIN above. */ +ESRAM_SIZE = 64k; /* Must be the same value MEMORY region ram LENGTH above. */ +MAIN_STACK_SIZE = 64k; /* Cortex main stack size. */ +MIN_SIZE_HEAP = 64k; /* needs to be calculated for your application */ +TOP_OF_MDDR = 0xA4000000; /* Top address of the external MDDR memory. */ + +/******************************************************************************* + * End of board customization. + *******************************************************************************/ +/*PROVIDE (__main_ram_size = ESRAM_SIZE); */ +PROVIDE (__main_stack_start = ESRAM_START_ADDRESS + ESRAM_SIZE); +PROVIDE (__process_stack_start = __main_stack_start - MAIN_STACK_SIZE); +PROVIDE (_estack = __main_stack_start); +PROVIDE (__mirrored_nvm = 0); /* Indicate to startup code that NVM is not mirrored to VMA address .text copy is required. */ + +/* + * Remap instruction for startup code and debugger. + * set __smartfusion2_memory_remap to one of the following: + * 0: remap eNVM to address 0x00000000 Production mode or debugging from eNVM + * 1: remap eSRAM to address 0x00000000 Debugging from eSRAM + * 2: remap external DDR memory to address 0x00000000 Debugging from DDR memory + */ +PROVIDE (__smartfusion2_memory_remap = 2); + +SECTIONS +{ + .vector_table : ALIGN(0x10) + { + __vector_table_load = LOADADDR(.vector_table); + __vector_table_start = .; + __vector_table_vma_base_address = .; /* required by debugger for start address */ + KEEP(*(.isr_vector)) + . = ALIGN(0x10); + _evector_table = .; + } >external_ram + + .text : ALIGN(0x10) + { + CREATE_OBJECT_SYMBOLS + __text_load = LOADADDR(.text); + __text_start = .; + *(.text .text.* .gnu.linkonce.t.*) + *(.plt) + *(.gnu.warning) + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) + + . = ALIGN(0x4); + /* These are for running static constructors and destructors under ELF. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + *(.rodata .rodata.* .gnu.linkonce.r.*) + + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.gcc_except_table) + *(.eh_frame_hdr) + *(.eh_frame) + + KEEP (*(.vector_table)) + KEEP (*(.init)) + KEEP (*(.fini)) + + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(0x10); + } >external_ram + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } >external_ram + __exidx_end = .; + _etext = .; + PROVIDE(__text_end = .); + + .data : ALIGN(0x10) + { + __data_load = LOADADDR (.data); + _sidata = LOADADDR (.data); + __data_start = .; + _sdata = .; + KEEP(*(.jcr)) + *(.got.plt) *(.got) + *(.shdata) + *(.data .data.* .gnu.linkonce.d.*) + . = ALIGN(0x10); + _edata = .; + } >data_external_ram + + .bss : ALIGN(0x10) + { + __bss_start__ = . ; + _sbss = .; + *(.shbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(0x10); + __bss_end__ = .; + _end = .; + __end = _end; + _ebss = .; + PROVIDE(end = .); + } >data_external_ram + + .heap : ALIGN(0x10) + { + __heap_start__ = .; + . += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */ + . += (ABSOLUTE(TOP_OF_MDDR) - . ); + . = ALIGN(0x10); + _eheap = .; + } >data_external_ram + + .stack : ALIGN(0x10) + { + __stack_start__ = .; + . += MAIN_STACK_SIZE; + . = ALIGN(0x10); + _estack = .; + } >esram + + .stab 0 (NOLOAD) : + { + *(.stab) + } + + .stabstr 0 (NOLOAD) : + { + *(.stabstr) + } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } + .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) } + /DISCARD/ : { *(.note.GNU-stack) *(.isr_vector) } +} diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-execute-in-place.ld b/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-execute-in-place.ld new file mode 100644 index 0000000000000000000000000000000000000000..a7a2d74435f3e176cc6eb35f9176a15509d13cb4 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-execute-in-place.ld @@ -0,0 +1,241 @@ +/******************************************************************************* + * (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. + * + * file name : production-smartfusion2-execute-in-place.ld + * SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable + * image executing in SmartFusion2 internal eNVM. + * + * Some current (April 2015) dev kit memory map possibilities are + * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- + * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ + * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ + * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- + * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used + * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- + * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- + * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ + * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ + * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- + * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ + * --Some older physical memory map possibilities are + * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- + * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- + * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ + * + * Example linker scripts use lowest practicl values so will work accross dev kits + * eNVM=256KB eRAM=64KB External memory = 64MB + * + * On reset, the eNVM region is mapped to 0x00000000 + * This is changed below by setting the __smartfusion2_memory_remap variable as required. + * Options are detailed below. + * + * SVN $Revision: 7454 $ + * SVN $Date: 2015-06-08 20:28:07 +0530 (Mon, 08 Jun 2015) $ + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +GROUP(-lc -lgcc -lm) +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) +SEARCH_DIR(.) +__DYNAMIC = 0; + +/******************************************************************************* + * Start of board customization. + *******************************************************************************/ +MEMORY +{ + /* + * In general, example LD scripts use lowest common memory footprint + * so will work with all devices. + */ + /* + * WARNING: The words "SOFTCONSOLE", "FLASH", and "USE", the colon ":", and + * the name of the type of flash memory are all in a specific order. + * Please do not modify that comment line, in order to ensure + * debugging of your application will use the flash memory correctly. + */ + + /* SOFTCONSOLE FLASH USE: microsemi-smartfusion2-envm */ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 256k + + /* SmartFusion2 internal eSRAM */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k +} + +RAM_START_ADDRESS = 0x20000000; /* Must be the same value MEMORY region ram ORIGIN above. */ +RAM_SIZE = 64k; /* Must be the same value MEMORY region ram LENGTH above. */ +MAIN_STACK_SIZE = 4k; /* Cortex main stack size. */ +MIN_SIZE_HEAP = 4k; /* needs to be calculated for your application */ + +/******************************************************************************* + * End of board customization. + *******************************************************************************/ + +PROVIDE (__main_stack_start = RAM_START_ADDRESS + RAM_SIZE); +PROVIDE (__process_stack_start = __main_stack_start - MAIN_STACK_SIZE); +PROVIDE (_estack = __main_stack_start); +PROVIDE (__mirrored_nvm = 0); /* Indicate to startup code that NVM is not mirrored to VMA address .text copy is required. */ + +/* + * Remap instruction for startup code and debugger: + * 0: remap eNVM to address 0x00000000 + * 1: remap eSRAM to address 0x00000000 + * 2: remap external DDR memory to address 0x00000000 + */ +PROVIDE (__smartfusion2_memory_remap = 0); + +SECTIONS +{ + .vector_table : + { + __vector_table_load = LOADADDR(.vector_table); + __vector_table_start = .; + __vector_table_vma_base_address = .; + KEEP(*(.isr_vector)) + . = ALIGN(0x10); + _evector_table = .; + } >rom + + .boot_code : ALIGN(0x10) /* When all code in NVRAM, no requirement for this section- but adds clarity when looking at .lst file */ + { + *(.boot_code) + . = ALIGN(0x10); + } >rom + + .text : ALIGN(0x10) + { + CREATE_OBJECT_SYMBOLS + __text_load = LOADADDR(.text); + __text_start = .; + + *(.text .text.* .gnu.linkonce.t.*) + *(.plt) + *(.gnu.warning) + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) + + . = ALIGN(0x4); + /* These are for running static constructors and destructors under ELF. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + *(.rodata .rodata.* .gnu.linkonce.r.*) + + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.gcc_except_table) + *(.eh_frame_hdr) + *(.eh_frame) + + KEEP (*(.vector_table)) + KEEP (*(.init)) + KEEP (*(.fini)) + + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(0x10); + } >rom + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } >rom + __exidx_end = .; + _etext = .; + + .data : ALIGN(0x10) + { + __data_load = LOADADDR(.data); + _sidata = LOADADDR (.data); + __data_start = .; + _sdata = .; + KEEP(*(.jcr)) + *(.got.plt) *(.got) + *(.shdata) + *(.data .data.* .gnu.linkonce.d.*) + . = ALIGN(0x10); + _edata = .; + } >ram AT>rom + + .bss : ALIGN(0x10) + { + __bss_start__ = . ; + _sbss = .; + *(.shbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(0x10); + __bss_end__ = .; + _end = .; + __end = _end; + _ebss = .; + PROVIDE(end = .); + } >ram AT>rom + + .heap : ALIGN(0x10) + { + __heap_start__ = .; + . += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */ + . += ((ABSOLUTE(RAM_START_ADDRESS) + RAM_SIZE - MAIN_STACK_SIZE) - .); /* assumes stack starts after heap */ + _eheap = .; + } >ram + + .stack : ALIGN(0x10) + { + __stack_start__ = .; + . += MAIN_STACK_SIZE; + _estack = .; + } >ram + + .stab 0 (NOLOAD) : + { + *(.stab) + } + + .stabstr 0 (NOLOAD) : + { + *(.stabstr) + } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } + .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) } + /DISCARD/ : { *(.note.GNU-stack) } +} diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-relocate-to-external-ram.ld b/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-relocate-to-external-ram.ld new file mode 100644 index 0000000000000000000000000000000000000000..e94cb53f8702577c691cf4dd673e94228a54aee8 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/production-smartfusion2-relocate-to-external-ram.ld @@ -0,0 +1,260 @@ +/******************************************************************************* + * (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved. + * + * file name : production-smartfusion2-relocate-to-external-ram.ld + * SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable + * image which is copied from internal eNVM to external RAM during boot-up. + * + * Some current (April 2015) dev kit memory map possibilities are + * --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment--------------- + * --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------ + * --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------ + * --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount-- + * --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used + * --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits----------- + * --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits----------- + * --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------ + * --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------ + * --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit----- + * --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------ + * --Some older physical memory map possibilities are + * --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment-------------- + * --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit-------------- + * --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------ + * + * Example linker scripts use lowest practicl values so will work accross dev kits + * eNVM=256KB eRAM=64KB External memory = 64MB + * + * On reset, the eNVM region is mapped to 0x00000000 + * This is changed below by setting the __smartfusion2_memory_remap variable as required. + * Options are detailed below. + * + * SVN $Revision: 7419 $ + * SVN $Date: 2015-05-15 21:20:21 +0530 (Fri, 15 May 2015) $ + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm") +GROUP(-lc -lgcc -lm) +OUTPUT_ARCH(arm) +ENTRY(Reset_Handler) +SEARCH_DIR(.) +__DYNAMIC = 0; + +/******************************************************************************* + * Start of board customization. + *******************************************************************************/ +MEMORY +{ + /* + * In general, example LD scripts use lowest common memory footprint + * so will work with all devices. + */ + /* + * WARNING: The words "SOFTCONSOLE", "FLASH", and "USE", the colon ":", and + * the name of the type of flash memory are all in a specific order. + * Please do not modify that comment line, in order to ensure + * debugging of your application will use the flash memory correctly. + */ + + /* SOFTCONSOLE FLASH USE: microsemi-smartfusion2-envm */ + rom (rx) : ORIGIN = 0x60000000, LENGTH = 256k + + /* External MDDR RAM used for data section. */ + /* 0xA0000000 where external memory starts */ + /* first 0x00FFFFF reserved for relocated progam */ + /* Locate external RX data above reserved program area */ + /* !!! This must not overlap with external_ram when MDDR is remapped to 0x00000000.!!! */ + data_external_ram (rw) : ORIGIN = 0xA2000000, LENGTH = 32m + /* SmartFusion2 development board external RAM */ + external_ram (rwx) : ORIGIN = 0x00000000, LENGTH = 32m + + /* SmartFusion2 internal eSRAM */ + esram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k + +} + +ESRAM_START_ADDRESS = 0x20000000; /* Must be the same value as MEMORY region esram ORIGIN above. */ +ESRAM_SIZE = 64k; /* Must be the same value as MEMORY region esram LENGTH above. */ +MAIN_STACK_SIZE = 64k; /* Cortex main stack size. */ +MIN_SIZE_HEAP = 64k; /* needs to be calculated for your application */ +TOP_OF_MDDR = 0xA4000000; /* Top address of the external MDDR memory. */ + +/******************************************************************************* + * End of board customization. + *******************************************************************************/ + +PROVIDE (__main_stack_start = ESRAM_START_ADDRESS + ESRAM_SIZE); +PROVIDE (__process_stack_start = __main_stack_start - MAIN_STACK_SIZE); +PROVIDE (_estack = __main_stack_start); +PROVIDE (__mirrored_nvm = 0); /* Indicate to startup code that NVM is not mirrored to VMA address .text copy is required. */ + +/* + * Remap instruction for startup code and debugger. + * set __smartfusion2_memory_remap to one of the following: + * 0: remap eNVM to address 0x00000000 Production mode or debugging from eNVM + * 1: remap eSRAM to address 0x00000000 Debugging from eSRAM + * 2: remap external DDR memory to address 0x00000000 Debugging from DDR memory + */ +PROVIDE (__smartfusion2_memory_remap = 2); + +SECTIONS +{ + .vector_table : ALIGN(0x10) + { + __vector_table_load = LOADADDR(.vector_table); + __vector_table_start = .; + __vector_table_vma_base_address = .; + KEEP(*(.isr_vector)) + . = ALIGN(0x10); + _evector_table = .; + } >external_ram AT>rom + + /* all data and code run/used before reloaction must be located here */ + .boot_code : ALIGN(0x10) + { + *(.boot_code) /* reset handler */ + *system_m2sxxx.o(.text*) /* SystemInit() - called before relocation to RAM so keep in ROM */ + *sys_config.o(.rodata*) + *sys_config_SERDESIF_?.o(.rodata*) /* data- used to configure external memeory before use */ + /* note ? is a wildcard, can be upto 4 instances */ + *mscc_post_hw_cfg_init.o /* used on startup */ + *ecc_error_handler.o(.text*) /* do we need this???? */ + . = ALIGN(0x10); + } >rom + + .text : ALIGN(0x10) + { + CREATE_OBJECT_SYMBOLS + __text_load = LOADADDR(.text); + __text_start = .; + + *(.text .text.* .gnu.linkonce.t.*) + *(.plt) + *(.gnu.warning) + *(.glue_7t) *(.glue_7) *(.vfp11_veneer) + + . = ALIGN(0x4); + /* These are for running static constructors and destructors under ELF. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + *(.rodata .rodata.* .gnu.linkonce.r.*) + + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.gcc_except_table) + *(.eh_frame_hdr) + *(.eh_frame) + + KEEP (*(.vector_table)) + KEEP (*(.init)) + KEEP (*(.fini)) + + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(0x10); + } >external_ram AT>rom + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } >external_ram AT>rom + __exidx_end = .; + _etext = .; + + .data : ALIGN(0x10) + { + __data_load = LOADADDR(.data); + _sidata = LOADADDR (.data); + __data_start = .; + _sdata = .; + KEEP(*(.jcr)) + *(.got.plt) *(.got) + *(.shdata) + *(.data .data.* .gnu.linkonce.d.*) + . = ALIGN(0x10); + _edata = .; + } >data_external_ram AT>rom + + .bss : ALIGN(0x10) + { + __bss_start__ = . ; + _sbss = .; + *(.shbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + . = ALIGN(0x10); + __bss_end__ = .; + _end = .; + __end = _end; + _ebss = .; + PROVIDE(end = .); + } >data_external_ram AT>rom + + .heap : ALIGN(0x10) + { + __heap_start__ = .; + . += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */ + . += (ABSOLUTE(TOP_OF_MDDR) - . ); + _eheap = .; + } >data_external_ram + + .stack : ALIGN(0x10) + { + __stack_start__ = .; + . += MAIN_STACK_SIZE; + _estack = .; + } >esram + + .stab 0 (NOLOAD) : + { + *(.stab) + } + + .stabstr 0 (NOLOAD) : + { + *(.stabstr) + } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) } + .ARM.attributes 0 : { KEEP (*(.ARM.attributes)) } + /DISCARD/ : { *(.note.GNU-stack) } +} diff --git a/bsp/smartfusion2/CMSIS/startup_gcc/startup_m2sxxx.S b/bsp/smartfusion2/CMSIS/startup_gcc/startup_m2sxxx.S new file mode 100644 index 0000000000000000000000000000000000000000..f1b23ed2a54e4ee85da019b000ce01a09c7ee548 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/startup_gcc/startup_m2sxxx.S @@ -0,0 +1,1297 @@ +/******************************************************************************* + * (c) Copyright 2012-2015 Microsemi SoC Products Group. All rights reserved. + * + * @file startup_m2sxxx.S + * @author Microsemi SoC Products Group + * @brief SmartFusion2 vector table and startup code for CodeSourcery G++. + * + * SVN $Revision: 7424 $ + * SVN $Date: 2015-05-19 21:16:09 +0530 (Tue, 19 May 2015) $ + */ + + .syntax unified + .cpu cortex-m3 + .thumb + +/* #define UNIT_TEST_FILL_MEMORY only uncommented if carring out unit test */ + +/*============================================================================== + * Vector table + */ + .global g_pfnVectors + .section .isr_vector,"ax",%progbits /* added "x" so appears in .lst file even though not executable code- to help in debug process */ + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WdogWakeup_IRQHandler + .word RTC_Wakeup_IRQHandler + .word SPI0_IRQHandler + .word SPI1_IRQHandler + .word I2C0_IRQHandler + .word I2C0_SMBAlert_IRQHandler + .word I2C0_SMBus_IRQHandler + .word I2C1_IRQHandler + .word I2C1_SMBAlert_IRQHandler + .word I2C1_SMBus_IRQHandler + .word UART0_IRQHandler + .word UART1_IRQHandler + .word EthernetMAC_IRQHandler + .word DMA_IRQHandler + .word Timer1_IRQHandler + .word Timer2_IRQHandler + .word CAN_IRQHandler + .word ENVM0_IRQHandler + .word ENVM1_IRQHandler + .word ComBlk_IRQHandler + .word USB_IRQHandler + .word USB_DMA_IRQHandler + .word PLL_Lock_IRQHandler + .word PLL_LockLost_IRQHandler + .word CommSwitchError_IRQHandler + .word CacheError_IRQHandler + .word DDR_IRQHandler + .word HPDMA_Complete_IRQHandler + .word HPDMA_Error_IRQHandler + .word ECC_Error_IRQHandler + .word MDDR_IOCalib_IRQHandler + .word FAB_PLL_Lock_IRQHandler + .word FAB_PLL_LockLost_IRQHandler + .word FIC64_IRQHandler + .word FabricIrq0_IRQHandler + .word FabricIrq1_IRQHandler + .word FabricIrq2_IRQHandler + .word FabricIrq3_IRQHandler + .word FabricIrq4_IRQHandler + .word FabricIrq5_IRQHandler + .word FabricIrq6_IRQHandler + .word FabricIrq7_IRQHandler + .word FabricIrq8_IRQHandler + .word FabricIrq9_IRQHandler + .word FabricIrq10_IRQHandler + .word FabricIrq11_IRQHandler + .word FabricIrq12_IRQHandler + .word FabricIrq13_IRQHandler + .word FabricIrq14_IRQHandler + .word FabricIrq15_IRQHandler + .word GPIO0_IRQHandler + .word GPIO1_IRQHandler + .word GPIO2_IRQHandler + .word GPIO3_IRQHandler + .word GPIO4_IRQHandler + .word GPIO5_IRQHandler + .word GPIO6_IRQHandler + .word GPIO7_IRQHandler + .word GPIO8_IRQHandler + .word GPIO9_IRQHandler + .word GPIO10_IRQHandler + .word GPIO11_IRQHandler + .word GPIO12_IRQHandler + .word GPIO13_IRQHandler + .word GPIO14_IRQHandler + .word GPIO15_IRQHandler + .word GPIO16_IRQHandler + .word GPIO17_IRQHandler + .word GPIO18_IRQHandler + .word GPIO19_IRQHandler + .word GPIO20_IRQHandler + .word GPIO21_IRQHandler + .word GPIO22_IRQHandler + .word GPIO23_IRQHandler + .word GPIO24_IRQHandler + .word GPIO25_IRQHandler + .word GPIO26_IRQHandler + .word GPIO27_IRQHandler + .word GPIO28_IRQHandler + .word GPIO29_IRQHandler + .word GPIO30_IRQHandler + .word GPIO31_IRQHandler + .word 0 + .word 0 + +/*============================================================================== + * Reset_Handler + * Register r11 is used to keep track of whether we need to initialize RAMs + * because ECC/ SECDED is enabled. + */ + .global Reset_Handler + .section .boot_code,"ax",%progbits + .type Reset_Handler, %function +Reset_Handler: +_start: +/*------------------------------------------------------------------------------ + * Initialize stack RAM content to initialize the error detection and correction + * (EDAC). This is done if EDAC is enabled for the eSRAM blocks or the + * ECC/SECDED is enabled for the MDDR. + * Register r11 is used to keep track of the RAM intialization decision outcome + * for later use for heap RAM initialization at the end of the startup code. + * Please note that the stack has to be located in eSRAM at this point and + * cannot be located in MDDR since MDDR is not available at this point. + * The bits of the content of register r11 have the following meaning: + * reg11[0]: eSRAM EDAC enabled + * reg11[1]: MDDR ECC/SECDED enabled + */ + mov r11, #0 + ldr r0, SF2_MDDR_MODE_CR + ldr r0, [r0] + ldr r1, SF2_EDAC_CR + ldr r1, [r1] + and r1, r1, #3 + and r0, r0, #0x1C + cmp r0, #0x14 + bne check_esram_edac + orr r11, r11, #2 +check_esram_edac: + cmp r1, #0 + beq check_stack_init + orr r11, r11, #1 +check_stack_init: + cmp r11, #0 + beq system_init +clear_stack: + ldr r0, = __stack_start__ + ldr r1, =_estack + ldr r2, RAM_INIT_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments uses r4, r5, r6, r7, r8, r9, and does not preserve contents */ + +/*------------------------------------------------------------------------------ + * Call CMSIS system init function. + */ + system_init: + ldr r0, =SystemInit + blx r0 + +/*------------------------------------------------------------------------------ + * Modify MDDR configuration if ECC/SECDED is enabled for MDDR. + * Enable write combining on MDDR bridge, disable non-bufferable regions. + */ + and r10, r11, 0x2 + cmp r10, #0 + beq remap_memory + ldr r0, SF2_DDRB_NB_SIZE + ldr r1, SF2_DDRB_CR + ldr r2, [r0] + ldr r3, [r1] + push {r0, r1, r2, r3} + mov r2, #0 + mov r3, #0xFF + str r2, [r0] + str r3, [r1] + +/*------------------------------------------------------------------------------ + * Perform memory remapping based on the value of __smartfusion2_memory_remap + * set in the linker script. + */ +remap_memory: + ldr r0, =__smartfusion2_memory_remap + ldr r2, =0 + ldr r3, =1 + cmp r0, #2 + bne check_esram_remap + /* + * Remap external RAM to address 0x00000000 + */ + ldr r1, SF2_ESRAM_CR + str r2, [r1] + ldr r1, SF2_ENVM_REMAP_CR + str r2, [r1] + ldr r1, SF2_DDR_CR + str r3, [r1] +check_esram_remap: + cmp r0, #1 + bne check_mirrored_nvm + /* + * Remap internal eSRAM to address 0x00000000 + */ + ldr r1, SF2_DDR_CR + str r2, [r1] + ldr r1, SF2_ENVM_REMAP_CR + str r2, [r1] + ldr r1, SF2_ESRAM_CR + str r3, [r1] + +/*------------------------------------------------------------------------------ + * Check if the executable is built for NVM LMA mirrored to VMA address. + * This is done for debugging executables running out of eNVM with SoftConsole. + * The .text section should not be copied in this case since both the LMA and + * VMA point at the eNVM despite the LMA and VMa having different values. + */ + check_mirrored_nvm: + ldr r0, =__mirrored_nvm + cmp r0, #0 + bne copy_data + +/*------------------------------------------------------------------------------ + * Copy vector table. + */ + ldr r0, =__vector_table_load + ldr r1, =__vector_table_start + ldr r2, =_evector_table + bl block_copy + +/*------------------------------------------------------------------------------ + * Copy code section. + */ +copy_text: + ldr r0, =__text_load + ldr r1, =__text_start + ldr r2, =_etext + bl block_copy + +/*------------------------------------------------------------------------------ + * Copy data section. + */ + + copy_data: + ldr r0, =__data_load + ldr r1, =__data_start + ldr r2, =_edata + bl block_copy + +/*------------------------------------------------------------------------------ + * Clear .bss + */ +clear_bss: + ldr r0, =__bss_start__ + ldr r1, =__bss_end__ + ldr r2, RAM_INIT_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments uses r4, r5, r6, r7, r8, r9, and does not preserve contents */ + +#ifdef UNIT_TEST_FILL_MEMORY + bl unit_test_fill_memory +#endif + +/*------------------------------------------------------------------------------ + * Initialize heap RAM content to initialize the error detection and correction + * (EDAC). We use the decision made earlier in the startup code of whether or + * not the stack RAM should be initialized. This decision is held in register + * r11. A non-zero value indicates that the RAM content should be initialized. + */ +clear_heap: + cmp r11, #0 + beq call_glob_ctor + ldr r0, =__heap_start__ + ldr r1, =_eheap + ldr r2, HEAP_INIT_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments uses r4, r5, r6, r7, r8, r9, and does not preserve contents */ + +/*------------------------------------------------------------------------------ + * Restore MDDR configuration. + */ + and r10, r11, 0x2 + cmp r10, #0 + beq call_glob_ctor + pop {r0, r1, r2, r3} + str r2, [r0] + str r3, [r1] + +/*------------------------------------------------------------------------------ + * Call global constructors + */ + /* + * Align to word and use 32-bits LDR instruction to ensure the ADD instruction + * taking PC as argument is aligned on a word boundary. + */ + .align 4 +call_glob_ctor: + ldr.w r0, =__libc_init_array + add lr, pc, #3 + bx r0 + +/*------------------------------------------------------------------------------ + * branch to main. + */ +branch_to_main: + mov r0, #0 /* ; no arguments */ + mov r1, #0 /* ; no argv either */ + ldr pc, =main + +ExitLoop: + B ExitLoop + +/*------------------------------------------------------------------------------ + * block copy. + * + * r0: source address + * r1: target address + * r2: end target address + * + * note: Most efficient if memory aligned. Linker ALIGN(16) command + * should be used as per example linker scripts. + * Note 1: If the memory address in r0 or r1, byte copy routine is used + * Note 2: If r1 < r2, will loop indefinetley to highlight linker issue. + */ +block_copy: + push {r3, r4, r5, r6, r7, r8, lr} + cmp r0, r1 + beq block_copy_exit /* ; Exit early if source and destination the same */ + subs.w r2, r2, r1 /* ; Calculate number of bytes to move */ + bpl block_copy_address_ok /* ; check (end target address) > (target address) => continue */ + b . /* ; halt as critical error- memory map not OK- make it easy to catch in debugger */ +block_copy_address_ok: + /* ; detect if source or target memory addresses unaligned. If so use byte copy routine */ + orr.w r3, r0, r1 + ands.w r3, r3, #3 + beq block_copy_continue +block_copy_byte_copy: + bl block_copy_byte + b block_copy_exit +block_copy_continue: + mov r3, #0 + mov r8,r2 /* ; Save copy of byte count */ + asrs r2,r2, #4 /* ; Div by 16 to get number of chunks to move */ + beq block_copy_byte_copy /* ; need to use byte copy if less than 16 bytes */ +block_copy_loop: + cmp r2, r3 + itt ne + ldmne r0!, {r4, r5, r6, r7} + stmne r1!, {r4, r5, r6, r7} + add.w r3, r3, #1 /* ; use Thumb2- make sure condition code reg. not updated */ + bne block_copy_loop + /* ; copy spare bytes at the end if any */ + and r8, #15 /* ; get spare bytes --check can you do an ands? */ + cmp r8, #0 /* ; no spare bytes at end- end now */ + beq block_copy_exit +copy_spare_bytes: /* ; From above, R0 contains source address, R1 contains destination address */ + ldrb r4, [r0] + strb r4, [r1] + add r0, #1 + add r1, #1 + subs r8, r8, #1 + bne copy_spare_bytes +block_copy_exit: + pop {r3, r4, r5, r6, r7, r8, pc} + +/* + * block_copy_byte: used if memory not aligned + * r0: source address + * r1: target address + * r2: number of bytes +*/ +block_copy_byte: + push {r3, lr} + mov r3, #0 +block_copy_byte_loop: /* ; From above, R0 contains source address, R1 contains destination address */ + ldrb r3, [r0] + strb r3, [r1] + add r0, #1 + add r1, #1 + subs r2, r2, #1 + bne block_copy_byte_loop + pop {r3, pc} + +/*;------------------------------------------------------------------------------ +; * fill_memory. +; * @brief Fills memory with Pattern contained in r2 +; * This routine uses the stmne instruction to copy 4 words at a time which is very efficient +; * The instruction can only write to word aligned memory, hence the code at the start and end of this routine +; * to handle possible unaligned bytes at start and end. +; * +; * @param param1 r0: start address +; * @param param2 r1: end address +; * @param param3 r2: FILL PATTETN +; * +; * @note note: Most efficient if memory aligned. Linker ALIGN(4) command +; * should be used as per example linker scripts +; * Stack is not used in this routine +; * register contents r4, r5, r6, r7, r8, r9, will are used and will be returned undefined +; * @return none - Used Registers are not preserved +; */ + +fill_memory: + /* ;push {r4, r5, r6, r7, r8, r9, lr} We will not use stack as may be not available */ + cmp r0, r1 + beq fill_memory_exit /* ; Exit early if source and destination the same */ +/* ; copy non-aligned bytes at the start */ + and.w r6, r0, #3 /* ; see if non-alaigned bytes at the start */ + cmp r6, #0 + beq fill_memory_end_start /* ; no spare bytes at start, continue */ + mov r5, #4 + sub.w r4, r5, r6 /* ; now have number of non-aligned bytes in r4 */ + mov r7, #8 + mul r8, r7, r6 /* ; calculate number of shifts required to initalise pattern for non-aligned bytes */ + mov r9, r2 /* ; copy pattern */ + ror r9, r9, r8 /* ; Rotate right to keep pattern consistent */ +fill_memory_spare_bytes_start: /* ; From above, R0 contains source address, R1 contains destination address */ + cmp r4, #0 /* ; no spare bytes at end- end now */ + beq fill_memory_end_start + strb r9, [r0] /* ; fill byte */ + ror.w r9, r9, r7 /* ; Rotate right by one byte for the next time, to keep pattern consistent */ + add r0, r0, #1 /* ; add one to address */ + subs r4, r4, #1 /* ; subtract one from byte count 1 */ + b fill_memory_spare_bytes_start +fill_memory_end_start: + mov r6, #0 + mov r7, r1 /* ; save end address */ + subs r1, r1, r0 /* ; Calculate number of bytes to fill */ + mov r8,r1 /* ; Save copy of byte count */ + asrs r1,r1, #4 /* ; Div by 16 to get number of chunks to move */ + mov r9, r2 /* ; copy pattern */ + mov r4, r2 /* ; copy pattern */ + mov r5, r2 /* ; copy pattern */ + cmp r1, r6 /* ; compare to see if all chunks copied */ + beq fill_memory_spare_bytes_end +fill_memory_loop: + it ne + stmne r0!, {r2, r4, r5, r9} /* ; copy pattern- note: stmne instruction must me word aligned (address in r0) */ + add.w r6, r6, #1 /* ; use Thumb2- make sure condition code reg. not updated */ + cmp r1, r6 /* ; compare to see if all chunks copied */ + bne fill_memory_loop +fill_memory_spare_bytes_end: /* ; copy spare bytes at the end if any */ + and.w r8, r8, #15 /* ; get spare bytes --check can you do an ands? */ +fill_memory_spare_end_loop: /* ; From above, R0 contains source address, R1 contains destination address */ + cmp r8, #0 /* ; no spare bytes at end- end now */ + beq fill_memory_exit + strb r2, [r0] + ror.w r2, r2, #8 /* ; Rotate right by one byte for the next time, to keep pattern consistent */ + add r0, r0, #1 /* ; add one to address */ + subs r8, r8, #1 /* ; subtract one from byte count 1 */ + b fill_memory_spare_end_loop +fill_memory_exit: + bx lr /*; We will not use pop as stack may be not available */ + + +/*------------------------------------------------------------------------------ + * unit_test_fill_memory + * calls fills_memory function with various paramaters + * + * r0: start address + * r1: end address + * r2: FILL PATTETN + * + * Debugger used to check filled memeory is as expected. + * Note: Last instruction in this routine deliberatly halts code to prevent accidentle enabeling in + * release code. + */ +#ifdef UNIT_TEST_FILL_MEMORY + MEM_TEST_PATTERN: .word 0x12345678 +unit_test_fill_memory: + push {r0, r1, r2, lr} + ldr r0, = 0x20000100 + ldr r1, = 0x20000200 + ldr r2, MEM_TEST_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments */ + ldr r0, = 0x20000300 /* ; source address */ + ldr r1, = 0x20000400 /* ; dest address */ + ldr r2, = 0x200004FF /* ; end address */ + bl block_copy /* ; copy above */ + /* second test */ + ldr r0, = 0x20003300 + ldr r1, = 0x20003403 + ldr r2, MEM_TEST_PATTERN + bl fill_memory + ldr r0, = 0x20003300 + ldr r1, = 0x20003500 + ldr r2, = 0x20003603 + bl block_copy + /* third test */ + ldr r0, = 0x20000702 + ldr r1, = 0x20000803 + ldr r2, MEM_TEST_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments */ + ldr r0, = 0x20000702 + ldr r1, = 0x20000902 + ldr r2, = 0x20000A03 + bl block_copy + /* fourth test */ + ldr r0, = 0x20000B01 + ldr r1, = 0x20000C03 + ldr r2, MEM_TEST_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments */ + ldr r0, = 0x20000B01 + ldr r1, = 0x20000D01 + ldr r2, = 0x20000E03 + bl block_copy + /* fith test */ + ldr r0, = 0x20002D01 + ldr r1, = 0x20002E01 + ldr r2, MEM_TEST_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments */ + ldr r0, = 0x20002D01 + ldr r1, = 0x20002F01 + ldr r2, = 0x20003001 + bl block_copy + /* sixth test */ + ldr r0, = 0x20001903 + ldr r1, = 0x20001904 + ldr r2, MEM_TEST_PATTERN + bl fill_memory /* ; fill_memory takes r0 - r2 as arguments */ + ldr r0, = 0x20001903 + ldr r1, = 0x20001A03 + ldr r2, = 0x20001A04 + bl block_copy + /* ; final test, note: This one will cause a halt in copy function- as designed */ + ldr r0, = 0x20001903 + ldr r1, = 0x20001A03 + ldr r2, = 0x20000A04 /* ; end address < start address */ + bl block_copy + unit_test_fill_memory_debug: /* ; delibrately wait here, this function only to be used when carrying out test */ + b . /* ; stop debugger here and verify memory as expected in debugger */ + pop {r0, r1, r2, pc} +#endif +/*============================================================================== + * NMI_Handler + */ + .weak NMI_Handler + .type NMI_Handler, %function +NMI_Handler: + B . + +/*============================================================================== + * HardFault_Handler + */ + .weak HardFault_Handler + .type HardFault_Handler, %function +HardFault_Handler: + B . + +/*============================================================================== + * MemManage_Handler + */ + .weak MemManage_Handler + .type MemManage_Handler, %function +MemManage_Handler: + B . + +/*============================================================================== + * BusFault_Handler + */ + .weak BusFault_Handler + .type BusFault_Handler, %function +BusFault_Handler: + B . + +/*============================================================================== + * UsageFault_Handler + */ + .weak UsageFault_Handler + .type UsageFault_Handler, %function +UsageFault_Handler: + B . + +/*============================================================================== + * SVC_Handler + */ + .weak SVC_Handler + .type SVC_Handler, %function +SVC_Handler: + B . + +/*============================================================================== + * DebugMon_Handler + */ + .weak DebugMon_Handler + .type DebugMon_Handler, %function +DebugMon_Handler: + B . + +/*============================================================================== + * PendSV_Handler + */ + .weak PendSV_Handler + .type PendSV_Handler, %function +PendSV_Handler: + B . + +/*============================================================================== + * SysTick_Handler + */ + .weak SysTick_Handler + .type SysTick_Handler, %function +SysTick_Handler: + B . + +/*============================================================================== + * WdogWakeup_IRQHandler + */ + .weak WdogWakeup_IRQHandler + .type WdogWakeup_IRQHandler, %function +WdogWakeup_IRQHandler: + B . + +/*============================================================================== + * RTC_Wakeup_IRQHandler + */ + .weak RTC_Wakeup_IRQHandler + .type RTC_Wakeup_IRQHandler, %function +RTC_Wakeup_IRQHandler: + B . + +/*============================================================================== + * SPI0_IRQHandler + */ + .weak SPI0_IRQHandler + .type SPI0_IRQHandler, %function +SPI0_IRQHandler: + B . + +/*============================================================================== + * SPI1_IRQHandler + */ + .weak SPI1_IRQHandler + .type SPI1_IRQHandler, %function +SPI1_IRQHandler: + B . + +/*============================================================================== + * I2C0_IRQHandler + */ + .weak I2C0_IRQHandler + .type I2C0_IRQHandler, %function +I2C0_IRQHandler: + B . + +/*============================================================================== + * I2C0_SMBAlert_IRQHandler + */ + .weak I2C0_SMBAlert_IRQHandler + .type I2C0_SMBAlert_IRQHandler, %function +I2C0_SMBAlert_IRQHandler: + B . + +/*============================================================================== + * I2C0_SMBus_IRQHandler + */ + .weak I2C0_SMBus_IRQHandler + .type I2C0_SMBus_IRQHandler, %function +I2C0_SMBus_IRQHandler: + B . + +/*============================================================================== + * I2C1_IRQHandler + */ + .weak I2C1_IRQHandler + .type I2C1_IRQHandler, %function +I2C1_IRQHandler: + B . + +/*============================================================================== + * I2C1_SMBAlert_IRQHandler + */ + .weak I2C1_SMBAlert_IRQHandler + .type I2C1_SMBAlert_IRQHandler, %function +I2C1_SMBAlert_IRQHandler: + B . + +/*============================================================================== + * I2C1_SMBus_IRQHandler + */ + .weak I2C1_SMBus_IRQHandler + .type I2C1_SMBus_IRQHandler, %function +I2C1_SMBus_IRQHandler: + B . + +/*============================================================================== + * UART0_IRQHandler + */ + .weak UART0_IRQHandler + .type UART0_IRQHandler, %function +UART0_IRQHandler: + B . + +/*============================================================================== + * UART1_IRQHandler + */ + .weak UART1_IRQHandler + .type UART1_IRQHandler, %function +UART1_IRQHandler: + B . + +/*============================================================================== + * EthernetMAC_IRQHandler + */ + .weak EthernetMAC_IRQHandler + .type EthernetMAC_IRQHandler, %function +EthernetMAC_IRQHandler: + B . + +/*============================================================================== + * DMA_IRQHandler + */ + .weak DMA_IRQHandler + .type DMA_IRQHandler, %function +DMA_IRQHandler: + B . + +/*============================================================================== + * Timer1_IRQHandler + */ + .weak Timer1_IRQHandler + .type Timer1_IRQHandler, %function +Timer1_IRQHandler: + B . + +/*============================================================================== + * Timer2_IRQHandler + */ + .weak Timer2_IRQHandler + .type Timer2_IRQHandler, %function +Timer2_IRQHandler: + B . + +/*============================================================================== + * CAN_IRQHandler + */ + .weak CAN_IRQHandler + .type CAN_IRQHandler, %function +CAN_IRQHandler: + B . + +/*============================================================================== + * ENVM0_IRQHandler + */ + .weak ENVM0_IRQHandler + .type ENVM0_IRQHandler, %function +ENVM0_IRQHandler: + B . + +/*============================================================================== + * ENVM1_IRQHandler + */ + .weak ENVM1_IRQHandler + .type ENVM1_IRQHandler, %function +ENVM1_IRQHandler: + B . + +/*============================================================================== + * ComBlk_IRQHandler + */ + .weak ComBlk_IRQHandler + .type ComBlk_IRQHandler, %function +ComBlk_IRQHandler: + B . + +/*============================================================================== + * USB_IRQHandler + */ + .weak USB_IRQHandler + .type USB_IRQHandler, %function +USB_IRQHandler: + B . + +/*============================================================================== + * USB_DMA_IRQHandler + */ + .weak USB_DMA_IRQHandler + .type USB_DMA_IRQHandler, %function +USB_DMA_IRQHandler: + B . + +/*============================================================================== + * PLL_Lock_IRQHandler + */ + .weak PLL_Lock_IRQHandler + .type PLL_Lock_IRQHandler, %function +PLL_Lock_IRQHandler: + B . + +/*============================================================================== + * PLL_LockLost_IRQHandler + */ + .weak PLL_LockLost_IRQHandler + .type PLL_LockLost_IRQHandler, %function +PLL_LockLost_IRQHandler: + B . + +/*============================================================================== + * CommSwitchError_IRQHandler + */ + .weak CommSwitchError_IRQHandler + .type CommSwitchError_IRQHandler, %function +CommSwitchError_IRQHandler: + B . + +/*============================================================================== + * CacheError_IRQHandler + */ + .weak CacheError_IRQHandler + .type CacheError_IRQHandler, %function +CacheError_IRQHandler: + B . + +/*============================================================================== + * DDR_IRQHandler + */ + .weak DDR_IRQHandler + .type DDR_IRQHandler, %function +DDR_IRQHandler: + B . + +/*============================================================================== + * HPDMA_Complete_IRQHandler + */ + .weak HPDMA_Complete_IRQHandler + .type HPDMA_Complete_IRQHandler, %function +HPDMA_Complete_IRQHandler: + B . + +/*============================================================================== + * HPDMA_Error_IRQHandler + */ + .weak HPDMA_Error_IRQHandler + .type HPDMA_Error_IRQHandler, %function +HPDMA_Error_IRQHandler: + B . + +/*============================================================================== + * ECC_Error_IRQHandler + */ + .weak ECC_Error_IRQHandler + .type ECC_Error_IRQHandler, %function +ECC_Error_IRQHandler: + B . + +/*============================================================================== + * MDDR_IOCalib_IRQHandler + */ + .weak MDDR_IOCalib_IRQHandler + .type MDDR_IOCalib_IRQHandler, %function +MDDR_IOCalib_IRQHandler: + B . + +/*============================================================================== + * FAB_PLL_Lock_IRQHandler + */ + .weak FAB_PLL_Lock_IRQHandler + .type FAB_PLL_Lock_IRQHandler, %function +FAB_PLL_Lock_IRQHandler: + B . + +/*============================================================================== + * FAB_PLL_LockLost_IRQHandler + */ + .weak FAB_PLL_LockLost_IRQHandler + .type FAB_PLL_LockLost_IRQHandler, %function +FAB_PLL_LockLost_IRQHandler: + B . + +/*============================================================================== + * FIC64_IRQHandler + */ + .weak FIC64_IRQHandler + .type FIC64_IRQHandler, %function +FIC64_IRQHandler: + B . + +/*============================================================================== + * FabricIrq0_IRQHandler + */ + .weak FabricIrq0_IRQHandler + .type FabricIrq0_IRQHandler, %function +FabricIrq0_IRQHandler: + B . + +/*============================================================================== + * FabricIrq1_IRQHandler + */ + .weak FabricIrq1_IRQHandler + .type FabricIrq1_IRQHandler, %function +FabricIrq1_IRQHandler: + B . + +/*============================================================================== + * FabricIrq2_IRQHandler + */ + .weak FabricIrq2_IRQHandler + .type FabricIrq2_IRQHandler, %function +FabricIrq2_IRQHandler: + B . + +/*============================================================================== + * FabricIrq3_IRQHandler + */ + .weak FabricIrq3_IRQHandler + .type FabricIrq3_IRQHandler, %function +FabricIrq3_IRQHandler: + B . + +/*============================================================================== + * FabricIrq4_IRQHandler + */ + .weak FabricIrq4_IRQHandler + .type FabricIrq4_IRQHandler, %function +FabricIrq4_IRQHandler: + B . + +/*============================================================================== + * FabricIrq5_IRQHandler + */ + .weak FabricIrq5_IRQHandler + .type FabricIrq5_IRQHandler, %function +FabricIrq5_IRQHandler: + B . + +/*============================================================================== + * FabricIrq6_IRQHandler + */ + .weak FabricIrq6_IRQHandler + .type FabricIrq6_IRQHandler, %function +FabricIrq6_IRQHandler: + B . + +/*============================================================================== + * FabricIrq7_IRQHandler + */ + .weak FabricIrq7_IRQHandler + .type FabricIrq7_IRQHandler, %function +FabricIrq7_IRQHandler: + B . + +/*============================================================================== + * FabricIrq8_IRQHandler + */ + .weak FabricIrq8_IRQHandler + .type FabricIrq8_IRQHandler, %function +FabricIrq8_IRQHandler: + B . + +/*============================================================================== + * FabricIrq9_IRQHandler + */ + .weak FabricIrq9_IRQHandler + .type FabricIrq9_IRQHandler, %function +FabricIrq9_IRQHandler: + B . + +/*============================================================================== + * FabricIrq10_IRQHandler + */ + .weak FabricIrq10_IRQHandler + .type FabricIrq10_IRQHandler, %function +FabricIrq10_IRQHandler: + B . + +/*============================================================================== + * FabricIrq11_IRQHandler + */ + .weak FabricIrq11_IRQHandler + .type FabricIrq11_IRQHandler, %function +FabricIrq11_IRQHandler: + B . + +/*============================================================================== + * FabricIrq12_IRQHandler + */ + .weak FabricIrq12_IRQHandler + .type FabricIrq12_IRQHandler, %function +FabricIrq12_IRQHandler: + B . + +/*============================================================================== + * FabricIrq13_IRQHandler + */ + .weak FabricIrq13_IRQHandler + .type FabricIrq13_IRQHandler, %function +FabricIrq13_IRQHandler: + B . + +/*============================================================================== + * FabricIrq14_IRQHandler + */ + .weak FabricIrq14_IRQHandler + .type FabricIrq14_IRQHandler, %function +FabricIrq14_IRQHandler: + B . + +/*============================================================================== + * FabricIrq15_IRQHandler + */ + .weak FabricIrq15_IRQHandler + .type FabricIrq15_IRQHandler, %function +FabricIrq15_IRQHandler: + B . + +/*============================================================================== + * GPIO0_IRQHandler + */ + .weak GPIO0_IRQHandler + .type GPIO0_IRQHandler, %function +GPIO0_IRQHandler: + B . + +/*============================================================================== + * GPIO1_IRQHandler + */ + .weak GPIO1_IRQHandler + .type GPIO1_IRQHandler, %function +GPIO1_IRQHandler: + B . + +/*============================================================================== + * GPIO2_IRQHandler + */ + .weak GPIO2_IRQHandler + .type GPIO2_IRQHandler, %function +GPIO2_IRQHandler: + B . + +/*============================================================================== + * GPIO3_IRQHandler + */ + .weak GPIO3_IRQHandler + .type GPIO3_IRQHandler, %function +GPIO3_IRQHandler: + B . + +/*============================================================================== + * GPIO4_IRQHandler + */ + .weak GPIO4_IRQHandler + .type GPIO4_IRQHandler, %function +GPIO4_IRQHandler: + B . + +/*============================================================================== + * GPIO5_IRQHandler + */ + .weak GPIO5_IRQHandler + .type GPIO5_IRQHandler, %function +GPIO5_IRQHandler: + B . + +/*============================================================================== + * GPIO6_IRQHandler + */ + .weak GPIO6_IRQHandler + .type GPIO6_IRQHandler, %function +GPIO6_IRQHandler: + B . + +/*============================================================================== + * GPIO7_IRQHandler + */ + .weak GPIO7_IRQHandler + .type GPIO7_IRQHandler, %function +GPIO7_IRQHandler: + B . + +/*============================================================================== + * GPIO8_IRQHandler + */ + .weak GPIO8_IRQHandler + .type GPIO8_IRQHandler, %function +GPIO8_IRQHandler: + B . + +/*============================================================================== + * GPIO9_IRQHandler + */ + .weak GPIO9_IRQHandler + .type GPIO9_IRQHandler, %function +GPIO9_IRQHandler: + B . + +/*============================================================================== + * GPIO10_IRQHandler + */ + .weak GPIO10_IRQHandler + .type GPIO10_IRQHandler, %function +GPIO10_IRQHandler: + B . + +/*============================================================================== + * GPIO11_IRQHandler + */ + .weak GPIO11_IRQHandler + .type GPIO11_IRQHandler, %function +GPIO11_IRQHandler: + B . + +/*============================================================================== + * GPIO12_IRQHandler + */ + .weak GPIO12_IRQHandler + .type GPIO12_IRQHandler, %function +GPIO12_IRQHandler: + B . + +/*============================================================================== + * GPIO13_IRQHandler + */ + .weak GPIO13_IRQHandler + .type GPIO13_IRQHandler, %function +GPIO13_IRQHandler: + B . + +/*============================================================================== + * GPIO14_IRQHandler + */ + .weak GPIO14_IRQHandler + .type GPIO14_IRQHandler, %function +GPIO14_IRQHandler: + B . + +/*============================================================================== + * GPIO15_IRQHandler + */ + .weak GPIO15_IRQHandler + .type GPIO15_IRQHandler, %function +GPIO15_IRQHandler: + B . + +/*============================================================================== + * GPIO16_IRQHandler + */ + .weak GPIO16_IRQHandler + .type GPIO16_IRQHandler, %function +GPIO16_IRQHandler: + B . + +/*============================================================================== + * GPIO17_IRQHandler + */ + .weak GPIO17_IRQHandler + .type GPIO17_IRQHandler, %function +GPIO17_IRQHandler: + B . + +/*============================================================================== + * GPIO18_IRQHandler + */ + .weak GPIO18_IRQHandler + .type GPIO18_IRQHandler, %function +GPIO18_IRQHandler: + B . + +/*============================================================================== + * GPIO19_IRQHandler + */ + .weak GPIO19_IRQHandler + .type GPIO19_IRQHandler, %function +GPIO19_IRQHandler: + B . + +/*============================================================================== + * GPIO20_IRQHandler + */ + .weak GPIO20_IRQHandler + .type GPIO20_IRQHandler, %function +GPIO20_IRQHandler: + B . + +/*============================================================================== + * GPIO21_IRQHandler + */ + .weak GPIO21_IRQHandler + .type GPIO21_IRQHandler, %function +GPIO21_IRQHandler: + B . + +/*============================================================================== + * GPIO22_IRQHandler + */ + .weak GPIO22_IRQHandler + .type GPIO22_IRQHandler, %function +GPIO22_IRQHandler: + B . + +/*============================================================================== + * GPIO23_IRQHandler + */ + .weak GPIO23_IRQHandler + .type GPIO23_IRQHandler, %function +GPIO23_IRQHandler: + B . + +/*============================================================================== + * GPIO24_IRQHandler + */ + .weak GPIO24_IRQHandler + .type GPIO24_IRQHandler, %function +GPIO24_IRQHandler: + B . + +/*============================================================================== + * GPIO25_IRQHandler + */ + .weak GPIO25_IRQHandler + .type GPIO25_IRQHandler, %function +GPIO25_IRQHandler: + B . + +/*============================================================================== + * GPIO26_IRQHandler + */ + .weak GPIO26_IRQHandler + .type GPIO26_IRQHandler, %function +GPIO26_IRQHandler: + B . + +/*============================================================================== + * GPIO27_IRQHandler + */ + .weak GPIO27_IRQHandler + .type GPIO27_IRQHandler, %function +GPIO27_IRQHandler: + B . + +/*============================================================================== + * GPIO28_IRQHandler + */ + .weak GPIO28_IRQHandler + .type GPIO28_IRQHandler, %function +GPIO28_IRQHandler: + B . + +/*============================================================================== + * GPIO29_IRQHandler + */ + .weak GPIO29_IRQHandler + .type GPIO29_IRQHandler, %function +GPIO29_IRQHandler: + B . + +/*============================================================================== + * GPIO30_IRQHandler + */ + .weak GPIO30_IRQHandler + .type GPIO30_IRQHandler, %function +GPIO30_IRQHandler: + B . + +/*============================================================================== + * GPIO31_IRQHandler + */ + .weak GPIO31_IRQHandler + .type GPIO31_IRQHandler, %function +GPIO31_IRQHandler: + B . + +/*============================================================================== + * mscc_post_hw_cfg_init + */ + .weak mscc_post_hw_cfg_init + .type mscc_post_hw_cfg_init, %function +mscc_post_hw_cfg_init: + BX LR + +/*============================================================================== + * Constants: + */ +RAM_INIT_PATTERN: .word 0x00000000 +HEAP_INIT_PATTERN: .word 0xA2A2A2A2 +SF2_ESRAM_CR: .word 0x40038000 +SF2_DDR_CR: .word 0x40038008 +SF2_ENVM_REMAP_CR: .word 0x40038010 +SF2_DDRB_NB_SIZE: .word 0x40038030 +SF2_DDRB_CR: .word 0x40038034 +SF2_EDAC_CR: .word 0x40038038 +SF2_MDDR_MODE_CR: .word 0x40020818 + +.end diff --git a/bsp/smartfusion2/CMSIS/sys_init_cfg_types.h b/bsp/smartfusion2/CMSIS/sys_init_cfg_types.h new file mode 100644 index 0000000000000000000000000000000000000000..38ed4ebe23f82d0abec50b5c6e588970fc203aac --- /dev/null +++ b/bsp/smartfusion2/CMSIS/sys_init_cfg_types.h @@ -0,0 +1,212 @@ +/******************************************************************************* + * (c) Copyright 2012 Microsemi SoC Products Group. All rights reserved. + * + * + * + * SVN $Revision: 4410 $ + * SVN $Date: 2012-07-16 14:36:17 +0100 (Mon, 16 Jul 2012) $ + */ + +#ifndef SYSTEM_INIT_CFG_TYPES_H_ +#define SYSTEM_INIT_CFG_TYPES_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/*============================================================================*/ +/* DDR Configuration */ +/*============================================================================*/ +typedef struct +{ + /*-------------------------------------------------------------------------- + * DDR Controller registers. + */ + struct + { + uint16_t DYN_SOFT_RESET_CR; + uint16_t RESERVED0; + uint16_t DYN_REFRESH_1_CR; + uint16_t DYN_REFRESH_2_CR; + uint16_t DYN_POWERDOWN_CR; + uint16_t DYN_DEBUG_CR; + uint16_t MODE_CR; + uint16_t ADDR_MAP_BANK_CR; + uint16_t ECC_DATA_MASK_CR; + uint16_t ADDR_MAP_COL_1_CR; + uint16_t ADDR_MAP_COL_2_CR; + uint16_t ADDR_MAP_ROW_1_CR; + uint16_t ADDR_MAP_ROW_2_CR; + uint16_t INIT_1_CR; + uint16_t CKE_RSTN_CYCLES_1_CR; + uint16_t CKE_RSTN_CYCLES_2_CR; + uint16_t INIT_MR_CR; + uint16_t INIT_EMR_CR; + uint16_t INIT_EMR2_CR; + uint16_t INIT_EMR3_CR; + uint16_t DRAM_BANK_TIMING_PARAM_CR; + uint16_t DRAM_RD_WR_LATENCY_CR; + uint16_t DRAM_RD_WR_PRE_CR; + uint16_t DRAM_MR_TIMING_PARAM_CR; + uint16_t DRAM_RAS_TIMING_CR; + uint16_t DRAM_RD_WR_TRNARND_TIME_CR; + uint16_t DRAM_T_PD_CR; + uint16_t DRAM_BANK_ACT_TIMING_CR; + uint16_t ODT_PARAM_1_CR; + uint16_t ODT_PARAM_2_CR; + uint16_t ADDR_MAP_COL_3_CR; + uint16_t MODE_REG_RD_WR_CR; + uint16_t MODE_REG_DATA_CR; + uint16_t PWR_SAVE_1_CR; + uint16_t PWR_SAVE_2_CR; + uint16_t ZQ_LONG_TIME_CR; + uint16_t ZQ_SHORT_TIME_CR; + uint16_t ZQ_SHORT_INT_REFRESH_MARGIN_1_CR; + uint16_t ZQ_SHORT_INT_REFRESH_MARGIN_2_CR; + uint16_t PERF_PARAM_1_CR; + uint16_t HPR_QUEUE_PARAM_1_CR; + uint16_t HPR_QUEUE_PARAM_2_CR; + uint16_t LPR_QUEUE_PARAM_1_CR; + uint16_t LPR_QUEUE_PARAM_2_CR; + uint16_t WR_QUEUE_PARAM_CR; + uint16_t PERF_PARAM_2_CR; + uint16_t PERF_PARAM_3_CR; + uint16_t DFI_RDDATA_EN_CR; + uint16_t DFI_MIN_CTRLUPD_TIMING_CR; + uint16_t DFI_MAX_CTRLUPD_TIMING_CR; + uint16_t DFI_WR_LVL_CONTROL_1_CR; + uint16_t DFI_WR_LVL_CONTROL_2_CR; + uint16_t DFI_RD_LVL_CONTROL_1_CR; + uint16_t DFI_RD_LVL_CONTROL_2_CR; + uint16_t DFI_CTRLUPD_TIME_INTERVAL_CR; + uint16_t DYN_SOFT_RESET_CR2; + uint16_t AXI_FABRIC_PRI_ID_CR; + } ddrc; + + /*-------------------------------------------------------------------------- + * DDR PHY configuration registers + */ + struct + { + uint16_t LOOPBACK_TEST_CR; + uint16_t BOARD_LOOPBACK_CR; + uint16_t CTRL_SLAVE_RATIO_CR; + uint16_t CTRL_SLAVE_FORCE_CR; + uint16_t CTRL_SLAVE_DELAY_CR; + uint16_t DATA_SLICE_IN_USE_CR; + uint16_t LVL_NUM_OF_DQ0_CR; + uint16_t DQ_OFFSET_1_CR; + uint16_t DQ_OFFSET_2_CR; + uint16_t DQ_OFFSET_3_CR; + uint16_t DIS_CALIB_RST_CR; + uint16_t DLL_LOCK_DIFF_CR; + uint16_t FIFO_WE_IN_DELAY_1_CR; + uint16_t FIFO_WE_IN_DELAY_2_CR; + uint16_t FIFO_WE_IN_DELAY_3_CR; + uint16_t FIFO_WE_IN_FORCE_CR; + uint16_t FIFO_WE_SLAVE_RATIO_1_CR; + uint16_t FIFO_WE_SLAVE_RATIO_2_CR; + uint16_t FIFO_WE_SLAVE_RATIO_3_CR; + uint16_t FIFO_WE_SLAVE_RATIO_4_CR; + uint16_t GATELVL_INIT_MODE_CR; + uint16_t GATELVL_INIT_RATIO_1_CR; + uint16_t GATELVL_INIT_RATIO_2_CR; + uint16_t GATELVL_INIT_RATIO_3_CR; + uint16_t GATELVL_INIT_RATIO_4_CR; + uint16_t LOCAL_ODT_CR; + uint16_t INVERT_CLKOUT_CR; + uint16_t RD_DQS_SLAVE_DELAY_1_CR; + uint16_t RD_DQS_SLAVE_DELAY_2_CR; + uint16_t RD_DQS_SLAVE_DELAY_3_CR; + uint16_t RD_DQS_SLAVE_FORCE_CR; + uint16_t RD_DQS_SLAVE_RATIO_1_CR; + uint16_t RD_DQS_SLAVE_RATIO_2_CR; + uint16_t RD_DQS_SLAVE_RATIO_3_CR; + uint16_t RD_DQS_SLAVE_RATIO_4_CR; + uint16_t WR_DQS_SLAVE_DELAY_1_CR; + uint16_t WR_DQS_SLAVE_DELAY_2_CR; + uint16_t WR_DQS_SLAVE_DELAY_3_CR; + uint16_t WR_DQS_SLAVE_FORCE_CR; + uint16_t WR_DQS_SLAVE_RATIO_1_CR; + uint16_t WR_DQS_SLAVE_RATIO_2_CR; + uint16_t WR_DQS_SLAVE_RATIO_3_CR; + uint16_t WR_DQS_SLAVE_RATIO_4_CR; + uint16_t WR_DATA_SLAVE_DELAY_1_CR; + uint16_t WR_DATA_SLAVE_DELAY_2_CR; + uint16_t WR_DATA_SLAVE_DELAY_3_CR; + uint16_t WR_DATA_SLAVE_FORCE_CR; + uint16_t WR_DATA_SLAVE_RATIO_1_CR; + uint16_t WR_DATA_SLAVE_RATIO_2_CR; + uint16_t WR_DATA_SLAVE_RATIO_3_CR; + uint16_t WR_DATA_SLAVE_RATIO_4_CR; + uint16_t WRLVL_INIT_MODE_CR; + uint16_t WRLVL_INIT_RATIO_1_CR; + uint16_t WRLVL_INIT_RATIO_2_CR; + uint16_t WRLVL_INIT_RATIO_3_CR; + uint16_t WRLVL_INIT_RATIO_4_CR; + uint16_t WR_RD_RL_CR; + uint16_t RDC_FIFO_RST_ERRCNTCLR_CR; + uint16_t RDC_WE_TO_RE_DELAY_CR; + uint16_t USE_FIXED_RE_CR; + uint16_t USE_RANK0_DELAYS_CR; + uint16_t USE_LVL_TRNG_LEVEL_CR; + uint16_t CONFIG_CR; + uint16_t RD_WR_GATE_LVL_CR; + uint16_t DYN_RESET_CR; + } phy; + + /*-------------------------------------------------------------------------- + * FIC-64 registers + * These registers are 16-bit wide and 32-bit aligned. + */ + struct + { + uint16_t NB_ADDR_CR; + uint16_t NBRWB_SIZE_CR; + uint16_t WB_TIMEOUT_CR; + uint16_t HPD_SW_RW_EN_CR; + uint16_t HPD_SW_RW_INVAL_CR; + uint16_t SW_WR_ERCLR_CR; + uint16_t ERR_INT_ENABLE_CR; + uint16_t NUM_AHB_MASTERS_CR; + uint16_t LOCK_TIMEOUTVAL_1_CR; + uint16_t LOCK_TIMEOUTVAL_2_CR; + uint16_t LOCK_TIMEOUT_EN_CR; + } fic; +} ddr_subsys_cfg_t; + +/*============================================================================*/ +/* FDDR Configuration */ +/*============================================================================*/ + +typedef struct +{ + uint16_t PLL_CONFIG_LOW_1; + uint16_t PLL_CONFIG_LOW_2; + uint16_t PLL_CONFIG_HIGH; + uint16_t FACC_CLK_EN; + uint16_t FACC_MUX_CONFIG; + uint16_t FACC_DIVISOR_RATIO; + uint16_t PLL_DELAY_LINE_SEL; + uint16_t SOFT_RESET; + uint16_t IO_CALIB; + uint16_t INTERRUPT_ENABLE; + uint16_t AXI_AHB_MODE_SEL; + uint16_t PHY_SELF_REF_EN; +} fddr_sysreg_t; + +/*============================================================================*/ +/* PCI Express Bridge IP Core configuration. */ +/*============================================================================*/ + +typedef struct +{ + uint32_t * p_reg; + uint32_t value; +} cfg_addr_value_pair_t; + +#ifdef __cplusplus +} +#endif + +#endif /* SYSTEM_INIT_CFG_TYPES_H_ */ diff --git a/bsp/smartfusion2/CMSIS/system_m2sxxx.c b/bsp/smartfusion2/CMSIS/system_m2sxxx.c new file mode 100644 index 0000000000000000000000000000000000000000..47c96571141727d46bc56dc18019953c810e06ed --- /dev/null +++ b/bsp/smartfusion2/CMSIS/system_m2sxxx.c @@ -0,0 +1,1005 @@ +/******************************************************************************* + * (c) Copyright 2012-2013 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 CMSIS system initialization. + * + * SVN $Revision: 7375 $ + * SVN $Date: 2015-05-01 14:57:40 +0100 (Fri, 01 May 2015) $ + */ +#include "m2sxxx.h" +#if MSCC_NO_RELATIVE_PATHS +#include "sys_config.h" +#else +#include "sys_config.h" +#endif +#include "sys_init_cfg_types.h" +/*------------------------------------------------------------------------------ + Silicon revisions. + */ +#define UNKNOWN_SILICON_REV 0 +#define M2S050_REV_A_SILICON 1 +#define M2S050_REV_B_SILICON 2 + +/*------------------------------------------------------------------------------ + * CoreConfigP IP block version. + */ +#define CORE_CONFIGP_V7_0 0x00070000u + +/*------------------------------------------------------------------------------ + * + */ +void mscc_post_hw_cfg_init(void); + +/*------------------------------------------------------------------------------ + * CoreConfigP/CoreConfigP register bits + */ +#define CONFIG_1_DONE 1u +#define CONFIG_2_DONE 2u + +#define INIT_DONE_MASK 0x00000001u +#define SDIF_RELEASED_MASK 0x00000002u + +/*------------------------------------------------------------------------------ + * System registers of interest. + */ +/* + * MSSDDR_FACC1_CR register masks: + */ +#define DDR_CLK_EN_SHIFT 8u +#define FACC_GLMUX_SEL_MASK 0x00001000u +#define CONTROLLER_PLL_INIT_MASK 0x04000000u +#define RCOSC_DIV2_MASK 0x00000004u + +/* + * MSSDDR_PLL_STATUS register masks: + */ +#define FAB_PLL_LOCK_MASK 0x00000001u +#define MPLL_LOCK_MASK 0x00000002u + +/* + * MSSDDR_PLL_STATUS_HIGH_CR register masks: + */ +#define FACC_PLL_BYPASS_MASK 0x00000001u + +/*------------------------------------------------------------------------------ + * Standard CMSIS global variables. + */ +uint32_t SystemCoreClock = MSS_SYS_M3_CLK_FREQ; /*!< System Clock Frequency (Core Clock) */ + +/*------------------------------------------------------------------------------ + * SmartFusion2 specific clocks. + */ +uint32_t g_FrequencyPCLK0 = MSS_SYS_APB_0_CLK_FREQ; /*!< Clock frequency of APB bus 0. */ +uint32_t g_FrequencyPCLK1 = MSS_SYS_APB_1_CLK_FREQ; /*!< Clock frequency of APB bus 1. */ +uint32_t g_FrequencyPCLK2 = MSS_SYS_APB_2_CLK_FREQ; /*!< Clock frequency of APB bus 2. */ +uint32_t g_FrequencyFIC0 = MSS_SYS_FIC_0_CLK_FREQ; /*!< Clock frequecny of FPGA fabric interface controller 1. */ +uint32_t g_FrequencyFIC1 = MSS_SYS_FIC_1_CLK_FREQ; /*!< Clock frequecny of FPGA fabric inteface controller 2. */ +uint32_t g_FrequencyFIC64 = MSS_SYS_FIC64_CLK_FREQ; /*!< Clock frequecny of 64-bit FPGA fabric interface controller. */ + +/*------------------------------------------------------------------------------ + * System configuration tables generated by Libero. + */ +#if MSS_SYS_MDDR_CONFIG_BY_CORTEX +extern MDDR_TypeDef * const g_m2s_mddr_addr; +extern const ddr_subsys_cfg_t g_m2s_mddr_subsys_config; +#endif + +#if MSS_SYS_FDDR_CONFIG_BY_CORTEX +extern FDDR_TypeDef * const g_m2s_fddr_addr; +extern const ddr_subsys_cfg_t g_m2s_fddr_subsys_config; +#endif + +#define MSS_SYS_SERDES_CONFIG_BY_CORTEX (MSS_SYS_SERDES_0_CONFIG_BY_CORTEX || MSS_SYS_SERDES_1_CONFIG_BY_CORTEX || MSS_SYS_SERDES_2_CONFIG_BY_CORTEX || MSS_SYS_SERDES_3_CONFIG_BY_CORTEX) + +#if MSS_SYS_SERDES_0_CONFIG_BY_CORTEX +extern const cfg_addr_value_pair_t g_m2s_serdes_0_config[SERDES_0_CFG_NB_OF_PAIRS]; +#endif + +#if MSS_SYS_SERDES_1_CONFIG_BY_CORTEX +extern const cfg_addr_value_pair_t g_m2s_serdes_1_config[SERDES_1_CFG_NB_OF_PAIRS]; +#endif + +#if MSS_SYS_SERDES_2_CONFIG_BY_CORTEX +extern const cfg_addr_value_pair_t g_m2s_serdes_2_config[SERDES_2_CFG_NB_OF_PAIRS]; +#endif + +#if MSS_SYS_SERDES_3_CONFIG_BY_CORTEX +extern const cfg_addr_value_pair_t g_m2s_serdes_3_config[SERDES_3_CFG_NB_OF_PAIRS]; +#endif + +#define MSS_SYS_CORESF2RESET_USED (MSS_SYS_MDDR_CONFIG_BY_CORTEX || MSS_SYS_FDDR_CONFIG_BY_CORTEX || MSS_SYS_SERDES_CONFIG_BY_CORTEX) + +/*============================================================================== + * List of PCIe lanes on which PMA_READY must be polled. Allows only polling PMA + * READY on the first lane of a PCIe link regardless of the number of lanes used + * or whether lane reversal is used. + */ +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX + +#define CONFIG_REG_LANE_SEL_LANE_0 0x00000100U +#define CONFIG_REG_LANE_SEL_LANE_1 0x00000200U +#define CONFIG_REG_LANE_SEL_LANE_2 0x00000400U +#define CONFIG_REG_LANE_SEL_LANE_3 0x00000800U + +#define CONFIG_REG_LANE_SEL_MASK (CONFIG_REG_LANE_SEL_LANE_0 | \ + CONFIG_REG_LANE_SEL_LANE_1 | \ + CONFIG_REG_LANE_SEL_LANE_2 | \ + CONFIG_REG_LANE_SEL_LANE_3) + +#define FIRST_PCIE_CTRL 1U +#define SECOND_PCIE_CTRL 2U + +typedef struct pma_poll_info +{ + SERDESIF_TypeDef * serdes; + SERDES_TypeDef * const lane; + uint16_t config_reg_lane_sel; + uint16_t pcie_ctrl_id; /* distinguish between first and second PCIe controller on M2S090. */ +} pma_poll_info_t; + +/*------------------------------------------------------------------------------ + * SERDES0: list of PMA to poll as part of PCIe configuration. This list only + * handles the first PCIe controller of SERDES0. + */ +static const pma_poll_info_t g_serdes0_pcie_lane_cfg_lut[] = +{ + #if defined(SERDESIF_0_PCIE_LANE_PMA_STATUS_LANE_0) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[0], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_0, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_LANE_PMA_STATUS_LANE_1) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[1], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_1, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_LANE_PMA_STATUS_LANE_2) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[2], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_2, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_LANE_PMA_STATUS_LANE_3) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[3], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_3, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + { + (SERDESIF_TypeDef *)0, /* SERDESIF_TypeDef * serdes */ + (SERDES_TypeDef *)0, /* SERDES_TypeDef * const lane */ + 0, /* uint16_t config_reg_lane_sel */ + 0 /* uint16_t pcie_ctrl_id */ + } +}; + +/*------------------------------------------------------------------------------ + * SERDES1: list of PMA to poll as part of PCIe configuration. This list handles + * both SERDES1 first PCIe controller and the M2S090 SERDES0 second PCIe + * controller. + */ +static const pma_poll_info_t g_serdes1_pcie_lane_cfg_lut[] = +{ + #if defined(SERDESIF_1_PCIE_LANE_PMA_STATUS_LANE_0) + { + SERDES1, /* SERDESIF_TypeDef * serdes */ + &SERDES1->lane[0], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_0, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_1_PCIE_LANE_PMA_STATUS_LANE_1) + { + SERDES1, /* SERDESIF_TypeDef * serdes */ + &SERDES1->lane[1], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_1, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_1_PCIE_LANE_PMA_STATUS_LANE_2) + { + SERDES1, /* SERDESIF_TypeDef * serdes */ + &SERDES1->lane[2], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_2, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_1_PCIE_LANE_PMA_STATUS_LANE_3) + { + SERDES1, /* SERDESIF_TypeDef * serdes */ + &SERDES1->lane[3], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_3, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + #if defined(SERDESIF_0_PCIE_1_LANE_PMA_STATUS_LANE_0) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[0], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_0, /* uint16_t config_reg_lane_sel */ + SECOND_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_1_LANE_PMA_STATUS_LANE_1) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[1], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_1, /* uint16_t config_reg_lane_sel */ + SECOND_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_1_LANE_PMA_STATUS_LANE_2) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[2], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_2, /* uint16_t config_reg_lane_sel */ + SECOND_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_0_PCIE_1_LANE_PMA_STATUS_LANE_3) + { + SERDES0, /* SERDESIF_TypeDef * serdes */ + &SERDES0->lane[3], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_3, /* uint16_t config_reg_lane_sel */ + SECOND_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + { + (SERDESIF_TypeDef *)0, /* SERDESIF_TypeDef * serdes */ + (SERDES_TypeDef *)0, /* SERDES_TypeDef * const lane */ + 0, /* uint16_t config_reg_lane_sel */ + 0 /* uint16_t pcie_ctrl_id */ + } +}; + +/*------------------------------------------------------------------------------ + * SERDES2: list of PMA to poll as part of PCIe configuration. + */ +static const pma_poll_info_t g_serdes2_pcie_lane_cfg_lut[] = +{ + #if defined(SERDESIF_2_PCIE_LANE_PMA_STATUS_LANE_0) + { + SERDES2, /* SERDESIF_TypeDef * serdes */ + &SERDES2->lane[0], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_0, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_2_PCIE_LANE_PMA_STATUS_LANE_1) + { + SERDES2, /* SERDESIF_TypeDef * serdes */ + &SERDES2->lane[1], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_1, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_2_PCIE_LANE_PMA_STATUS_LANE_2) + { + SERDES2, /* SERDESIF_TypeDef * serdes */ + &SERDES2->lane[2], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_2, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_2_PCIE_LANE_PMA_STATUS_LANE_3) + { + SERDES2, /* SERDESIF_TypeDef * serdes */ + &SERDES2->lane[3], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_3, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + { + (SERDESIF_TypeDef *)0, /* SERDESIF_TypeDef * serdes */ + (SERDES_TypeDef *)0, /* SERDES_TypeDef * const lane */ + 0, /* uint16_t config_reg_lane_sel */ + 0 /* uint16_t pcie_ctrl_id */ + } +}; + +/*------------------------------------------------------------------------------ + * SERDES3: list of PMA to poll as part of PCIe configuration. + */ +static const pma_poll_info_t g_serdes3_pcie_lane_cfg_lut[] = +{ + #if defined(SERDESIF_3_PCIE_LANE_PMA_STATUS_LANE_0) + { + SERDES3, /* SERDESIF_TypeDef * serdes */ + &SERDES3->lane[0], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_0, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_3_PCIE_LANE_PMA_STATUS_LANE_1) + { + SERDES3, /* SERDESIF_TypeDef * serdes */ + &SERDES3->lane[1], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_1, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_3_PCIE_LANE_PMA_STATUS_LANE_2) + { + SERDES3, /* SERDESIF_TypeDef * serdes */ + &SERDES3->lane[2], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_2, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + #if defined(SERDESIF_3_PCIE_LANE_PMA_STATUS_LANE_3) + { + SERDES3, /* SERDESIF_TypeDef * serdes */ + &SERDES3->lane[3], /* SERDES_TypeDef * const lane */ + CONFIG_REG_LANE_SEL_LANE_3, /* uint16_t config_reg_lane_sel */ + FIRST_PCIE_CTRL /* uint16_t pcie_ctrl_id */ + }, + #endif + + { + (SERDESIF_TypeDef *)0, /* SERDESIF_TypeDef * serdes */ + (SERDES_TypeDef *)0, /* SERDES_TypeDef * const lane */ + 0, /* uint16_t config_reg_lane_sel */ + 0 /* uint16_t pcie_ctrl_id */ + } +}; + +/*------------------------------------------------------------------------------ + * Master lookup table for all SERDES PCIe configuration. + */ +static const pma_poll_info_t * const g_pcie_lane_cfg_lut[] = +{ + g_serdes0_pcie_lane_cfg_lut, + g_serdes1_pcie_lane_cfg_lut, + g_serdes2_pcie_lane_cfg_lut, + g_serdes3_pcie_lane_cfg_lut +}; + +#endif + +/*------------------------------------------------------------------------------ + * Local functions: + */ +static uint32_t get_silicon_revision(void); +static void silicon_workarounds(void); +static void m2s050_rev_a_workarounds(void); + +#if (MSS_SYS_FACC_INIT_BY_CORTEX == 1) +static void complete_clock_config(void); +#endif + +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX +static void configure_serdes_intf(void); +static void configure_pcie_intf(void); + +static void configure_pcie_block +( + const cfg_addr_value_pair_t * p_addr_value_pair, + uint32_t nb_of_cfg_pairs, + uint32_t serdes_id +); +#endif + +#if (MSS_SYS_MDDR_CONFIG_BY_CORTEX || MSS_SYS_FDDR_CONFIG_BY_CORTEX) +static void config_ddr_subsys +( + const ddr_subsys_cfg_t * p_ddr_subsys_cfg, + DDRCore_TypeDef * p_ddr_subsys_regs +); +#endif + +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX +static void config_by_addr_value +( + const cfg_addr_value_pair_t * p_addr_value_pair, + uint32_t nb_of_cfg_pairs +); +#endif + +static uint32_t get_rcosc_25_50mhz_frequency(void); +static void set_clock_frequency_globals(uint32_t fclk); + +/***************************************************************************//** + * See system_m2sxxx.h for details. + */ +void SystemInit(void) +{ +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX + uint32_t sdif_released; +#endif +#if MSS_SYS_CORESF2RESET_USED + uint32_t init_done; +#endif + +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX + uint32_t core_cfg_version; + + core_cfg_version = CORE_SF2_CFG->IP_VERSION_SR; +#endif + + /* + * Do not make use of global variables or make any asumptions regarding + * memory content if modifying this function. The memory content has not been + * initialised by the time this function is called by the start-up code. + */ +#if (MSS_SYS_FACC_INIT_BY_CORTEX == 1) + complete_clock_config(); +#endif + + silicon_workarounds(); + + /*-------------------------------------------------------------------------- + * Set STKALIGN to ensure exception stacking starts on 8 bytes address + * boundary. This ensures compliance with the "Procedure Call Standards for + * the ARM Architecture" (AAPCS). + */ + SCB->CCR |= SCB_CCR_STKALIGN_Msk; + + /*-------------------------------------------------------------------------- + * MDDR configuration + */ +#if MSS_SYS_MDDR_CONFIG_BY_CORTEX + if(0u == SYSREG->DDR_CR) + { + /* + * We only configure the MDDR memory controller if MDDR is not remapped + * to address 0x00000000. If MDDR is remapped to 0x00000000 then we are + * probably executing this code from MDDR in a debugging session and + * attempting to reconfigure the MDDR memory controller will cause the + * Cortex-M3 to crash. + */ + config_ddr_subsys(&g_m2s_mddr_subsys_config, &g_m2s_mddr_addr->core); + } +#endif + + /*-------------------------------------------------------------------------- + * FDDR configuration + */ +#if MSS_SYS_FDDR_CONFIG_BY_CORTEX + config_ddr_subsys(&g_m2s_fddr_subsys_config, &g_m2s_fddr_addr->core); +#endif + + /*-------------------------------------------------------------------------- + * Call user defined configuration function. + */ + mscc_post_hw_cfg_init(); + + /*-------------------------------------------------------------------------- + * SERDES interfaces configuration. + */ +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX + configure_serdes_intf(); + + if(core_cfg_version >= CORE_CONFIGP_V7_0) + { + CORE_SF2_CFG->CONFIG_DONE = CONFIG_1_DONE; + + /* Poll for SDIF_RELEASED. */ + do + { + sdif_released = CORE_SF2_CFG->INIT_DONE & SDIF_RELEASED_MASK; + } while (0u == sdif_released); + } + + configure_pcie_intf(); +#endif + + /*-------------------------------------------------------------------------- + * Synchronize with CoreSF2Reset controlling resets from the fabric. + */ +#if MSS_SYS_CORESF2RESET_USED + /* + * Negate FPGA_SOFTRESET to de-assert MSS_RESET_N_M2F in the fabric. We must + * do this here because this signal is only deasserted by the System + * Controller on a power-on reset. Other types of reset such as a watchdog + * reset would result in the FPGA fabric being held in reset and getting + * stuck waiting for the CoreSF2Config INIT_DONE to become asserted. + */ + SYSREG->SOFT_RST_CR &= ~SYSREG_FPGA_SOFTRESET_MASK; + + /* + * Signal to CoreSF2Reset that peripheral configuration registers have been + * written. + */ + CORE_SF2_CFG->CONFIG_DONE |= (CONFIG_1_DONE | CONFIG_2_DONE); + + /* Wait for INIT_DONE from CoreSF2Reset. */ + do + { + init_done = CORE_SF2_CFG->INIT_DONE & INIT_DONE_MASK; + } while (0u == init_done); +#endif +} + +/***************************************************************************//** + * SystemCoreClockUpdate() + */ +#define RCOSC_25_50MHZ_CLK_SRC 0u +#define CLK_XTAL_CLK_SRC 1u +#define RCOSC_1_MHZ_CLK_SRC 2u +#define CCC2ASCI_CLK_SRC 3u + +#define FACC_STANDBY_SHIFT 6u +#define FACC_STANDBY_SEL_MASK 0x00000007u + +#define FREQ_32KHZ 32768u +#define FREQ_1MHZ 1000000u +#define FREQ_25MHZ 25000000u +#define FREQ_50MHZ 50000000u + +void SystemCoreClockUpdate(void) +{ + uint32_t controller_pll_init; + uint32_t clk_src; + + controller_pll_init = SYSREG->MSSDDR_FACC1_CR & CONTROLLER_PLL_INIT_MASK; + + if(0u == controller_pll_init) + { + /* Normal operations. */ + uint32_t global_mux_sel; + + global_mux_sel = SYSREG->MSSDDR_FACC1_CR & FACC_GLMUX_SEL_MASK; + if(0u == global_mux_sel) + { + /* MSS clocked from MSS PLL. Use Libero flow defines. */ + SystemCoreClock = MSS_SYS_M3_CLK_FREQ; + g_FrequencyPCLK0 = MSS_SYS_APB_0_CLK_FREQ; + g_FrequencyPCLK1 = MSS_SYS_APB_1_CLK_FREQ; + g_FrequencyPCLK2 = MSS_SYS_APB_2_CLK_FREQ; + g_FrequencyFIC0 = MSS_SYS_FIC_0_CLK_FREQ; + g_FrequencyFIC1 = MSS_SYS_FIC_1_CLK_FREQ; + g_FrequencyFIC64 = MSS_SYS_FIC64_CLK_FREQ; + } + else + { + /* MSS clocked from standby clock. */ + const uint8_t standby_clock_lut[8] = { RCOSC_25_50MHZ_CLK_SRC, + CLK_XTAL_CLK_SRC, + RCOSC_25_50MHZ_CLK_SRC, + CLK_XTAL_CLK_SRC, + RCOSC_1_MHZ_CLK_SRC, + RCOSC_1_MHZ_CLK_SRC, + CCC2ASCI_CLK_SRC, + CCC2ASCI_CLK_SRC }; + + uint32_t standby_sel; + uint8_t clock_source; + + standby_sel = (SYSREG->MSSDDR_FACC2_CR >> FACC_STANDBY_SHIFT) & FACC_STANDBY_SEL_MASK; + clock_source = standby_clock_lut[standby_sel]; + switch(clock_source) + { + case RCOSC_25_50MHZ_CLK_SRC: + clk_src = get_rcosc_25_50mhz_frequency(); + set_clock_frequency_globals(clk_src); + break; + + case CLK_XTAL_CLK_SRC: + set_clock_frequency_globals(FREQ_32KHZ); + break; + + case RCOSC_1_MHZ_CLK_SRC: + set_clock_frequency_globals(FREQ_1MHZ); + break; + + case CCC2ASCI_CLK_SRC: + /* Fall through. */ + default: + set_clock_frequency_globals(FREQ_1MHZ); + break; + } + } + } + else + { + /* PLL initialization mode. Running from 25/50MHZ RC oscillator. */ + clk_src = get_rcosc_25_50mhz_frequency(); + set_clock_frequency_globals(clk_src); + } +} + +/***************************************************************************//** + * Find out frequency generated by the 25_50mhz RC osciallator. + */ +static uint32_t get_rcosc_25_50mhz_frequency(void) +{ + uint32_t rcosc_div2; + uint32_t rcosc_frequency; + + rcosc_div2 = SYSREG->MSSDDR_PLL_STATUS & RCOSC_DIV2_MASK; + if(0u == rcosc_div2) + { + /* 25_50mhz oscillator is configured for 25 MHz operations. */ + rcosc_frequency = FREQ_25MHZ; + } + else + { + /* 25_50mhz oscillator is configured for 50 MHz operations. */ + rcosc_frequency = FREQ_50MHZ; + } + + return rcosc_frequency; +} + +/***************************************************************************//** + Set the value of the clock frequency global variables based on the value of + standby_clk passed as parameter. + The following global variables are set by this function: + - SystemCoreClock + - g_FrequencyPCLK0 + - g_FrequencyPCLK1 + - g_FrequencyPCLK2 + - g_FrequencyFIC0 + - g_FrequencyFIC1 + - g_FrequencyFIC64 + */ +static void set_clock_frequency_globals(uint32_t standby_clk) +{ + SystemCoreClock = standby_clk; + g_FrequencyPCLK0 = standby_clk; + g_FrequencyPCLK1 = standby_clk; + g_FrequencyPCLK2 = MSS_SYS_APB_2_CLK_FREQ; + g_FrequencyFIC0 = standby_clk; + g_FrequencyFIC1 = standby_clk; + g_FrequencyFIC64 = standby_clk; +} + +/***************************************************************************//** + * Write 16-bit configuration values into 32-bit word aligned registers. + */ +#if (MSS_SYS_MDDR_CONFIG_BY_CORTEX || MSS_SYS_FDDR_CONFIG_BY_CORTEX) +static void copy_cfg16_to_regs +( + volatile uint32_t * p_regs, + const uint16_t * p_cfg, + uint32_t nb_16bit_words +) +{ + uint32_t inc; + + for(inc = 0u; inc < nb_16bit_words; ++inc) + { + p_regs[inc] = p_cfg[inc]; + } +} +#endif + +/***************************************************************************//** + * Configure peripheral using register address and register value pairs. + */ +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX +static void config_by_addr_value +( + const cfg_addr_value_pair_t * p_addr_value_pair, + uint32_t nb_of_cfg_pairs +) +{ + uint32_t inc; + + for(inc = 0u; inc < nb_of_cfg_pairs; ++inc) + { + *p_addr_value_pair[inc].p_reg = p_addr_value_pair[inc].value; + } +} +#endif + +/***************************************************************************//** + * DDR subsystem configuration. + */ +#if (MSS_SYS_MDDR_CONFIG_BY_CORTEX || MSS_SYS_FDDR_CONFIG_BY_CORTEX) + +#define NB_OF_DDRC_REGS_TO_CONFIG 57u +#define NB_OF_DDR_PHY_REGS_TO_CONFIG 65u + +static void config_ddr_subsys +( + const ddr_subsys_cfg_t * p_ddr_subsys_cfg, + DDRCore_TypeDef * p_ddr_subsys_regs +) +{ + volatile uint32_t * p_regs; + const uint16_t * p_cfg; + + /*-------------------------------------------------------------------------- + * Configure DDR controller part of the MDDR subsystem. + */ + p_cfg = &p_ddr_subsys_cfg->ddrc.DYN_SOFT_RESET_CR; + p_regs = &p_ddr_subsys_regs->ddrc.DYN_SOFT_RESET_CR; + + copy_cfg16_to_regs(p_regs, p_cfg, NB_OF_DDRC_REGS_TO_CONFIG); + + /*-------------------------------------------------------------------------- + * Configure DDR PHY. + */ + p_cfg = &p_ddr_subsys_cfg->phy.LOOPBACK_TEST_CR; + p_regs = &p_ddr_subsys_regs->phy.LOOPBACK_TEST_CR; + + copy_cfg16_to_regs(p_regs, p_cfg, NB_OF_DDR_PHY_REGS_TO_CONFIG); + + /*-------------------------------------------------------------------------- + * Configure DDR FIC. + */ + p_ddr_subsys_regs->fic.NB_ADDR_CR = p_ddr_subsys_cfg->fic.NB_ADDR_CR; + p_ddr_subsys_regs->fic.NBRWB_SIZE_CR = p_ddr_subsys_cfg->fic.NBRWB_SIZE_CR; + p_ddr_subsys_regs->fic.WB_TIMEOUT_CR = p_ddr_subsys_cfg->fic.WB_TIMEOUT_CR; + p_ddr_subsys_regs->fic.HPD_SW_RW_EN_CR = p_ddr_subsys_cfg->fic.HPD_SW_RW_EN_CR; + p_ddr_subsys_regs->fic.HPD_SW_RW_INVAL_CR = p_ddr_subsys_cfg->fic.HPD_SW_RW_INVAL_CR; + p_ddr_subsys_regs->fic.SW_WR_ERCLR_CR = p_ddr_subsys_cfg->fic.SW_WR_ERCLR_CR; + p_ddr_subsys_regs->fic.ERR_INT_ENABLE_CR = p_ddr_subsys_cfg->fic.ERR_INT_ENABLE_CR; + p_ddr_subsys_regs->fic.NUM_AHB_MASTERS_CR = p_ddr_subsys_cfg->fic.NUM_AHB_MASTERS_CR; + p_ddr_subsys_regs->fic.LOCK_TIMEOUTVAL_CR[0] = p_ddr_subsys_cfg->fic.LOCK_TIMEOUTVAL_1_CR; + p_ddr_subsys_regs->fic.LOCK_TIMEOUTVAL_CR[1] = p_ddr_subsys_cfg->fic.LOCK_TIMEOUTVAL_2_CR; + p_ddr_subsys_regs->fic.LOCK_TIMEOUT_EN_CR = p_ddr_subsys_cfg->fic.LOCK_TIMEOUT_EN_CR; + + /*-------------------------------------------------------------------------- + * Enable DDR. + */ + p_ddr_subsys_regs->ddrc.DYN_SOFT_RESET_CR = 0x01u; + + while(0x0000u == p_ddr_subsys_regs->ddrc.DDRC_SR) + { + ; + } +} + +#endif + +/***************************************************************************//** + * Configure SERDES interfaces. + */ +#if MSS_SYS_SERDES_CONFIG_BY_CORTEX + +static void configure_serdes_intf(void) +{ + #if MSS_SYS_SERDES_0_CONFIG_BY_CORTEX + config_by_addr_value(g_m2s_serdes_0_config, SERDES_0_CFG_NB_OF_PAIRS); + #endif + + #if MSS_SYS_SERDES_1_CONFIG_BY_CORTEX + config_by_addr_value(g_m2s_serdes_1_config, SERDES_1_CFG_NB_OF_PAIRS); + #endif + + #if MSS_SYS_SERDES_2_CONFIG_BY_CORTEX + config_by_addr_value(g_m2s_serdes_2_config, SERDES_2_CFG_NB_OF_PAIRS); + #endif + + #if MSS_SYS_SERDES_3_CONFIG_BY_CORTEX + config_by_addr_value(g_m2s_serdes_3_config, SERDES_3_CFG_NB_OF_PAIRS); + #endif +} + +/***************************************************************************//** + * Configure PCIe interfaces. + */ +static void configure_pcie_intf(void) +{ + #if MSS_SYS_SERDES_0_CONFIG_BY_CORTEX + configure_pcie_block(g_m2s_serdes_0_config, SERDES_0_CFG_NB_OF_PAIRS, 0u); + #endif + + #if MSS_SYS_SERDES_1_CONFIG_BY_CORTEX + configure_pcie_block(g_m2s_serdes_1_config, SERDES_1_CFG_NB_OF_PAIRS, 1u); + #endif + + #if MSS_SYS_SERDES_2_CONFIG_BY_CORTEX + configure_pcie_block(g_m2s_serdes_2_config, SERDES_2_CFG_NB_OF_PAIRS, 2u); + #endif + + #if MSS_SYS_SERDES_3_CONFIG_BY_CORTEX + configure_pcie_block(g_m2s_serdes_3_config, SERDES_3_CFG_NB_OF_PAIRS, 3u); + #endif +} + +/*------------------------------------------------------------------------------ + Configure one individual PCIe block. + */ +static void configure_pcie_block +( + const cfg_addr_value_pair_t * p_addr_value_pair, + uint32_t nb_of_cfg_pairs, + uint32_t serdes_id +) +{ + uint32_t inc; + + const uint32_t PMA_READY_MASK = 0x00000080u; + const uint32_t PCIE_CTRL_REG_LENGTH = 0x1000u; + const uint32_t PCIE_CTLR_SOFTRESET_MASK = 0x00000001; + const uint32_t PCIE2_CTLR_SOFTRESET_MASK = 0x00000040; + + SERDESIF_TypeDef * const serdes_lut[4] = + { + SERDES0, SERDES1, SERDES2, SERDES3 + }; + + const uint32_t pcie_ctrl_top_addr_lut[4] = + { + SERDES0_CFG_BASE + PCIE_CTRL_REG_LENGTH, + SERDES1_CFG_BASE + PCIE_CTRL_REG_LENGTH, + SERDES2_CFG_BASE + PCIE_CTRL_REG_LENGTH, + SERDES3_CFG_BASE + PCIE_CTRL_REG_LENGTH + }; + + /* + * Poll for PMA_READY. + */ + inc = 0U; + while(g_pcie_lane_cfg_lut[serdes_id][inc].config_reg_lane_sel != 0) + { + uint32_t pma_ready; + uint32_t config_phy_mode_1; + + /* select lane */ + config_phy_mode_1 = g_pcie_lane_cfg_lut[serdes_id][inc].serdes->sys_regs.CONFIG_PHY_MODE_1; + config_phy_mode_1 &= ~CONFIG_REG_LANE_SEL_MASK; + config_phy_mode_1 |= (uint32_t)g_pcie_lane_cfg_lut[serdes_id][inc].config_reg_lane_sel; + g_pcie_lane_cfg_lut[serdes_id][inc].serdes->sys_regs.CONFIG_PHY_MODE_1 = config_phy_mode_1; + + /* Wait for PMA to become ready. */ + do + { + pma_ready = g_pcie_lane_cfg_lut[serdes_id][inc].lane->PMA_STATUS & PMA_READY_MASK; + } + while (0u == pma_ready); + ++inc; + } + + /* + * Configure the PCIe controller registers. + */ + for(inc = 0u; inc < nb_of_cfg_pairs; ++inc) + { + uint32_t reg_addr; + + reg_addr = (uint32_t)p_addr_value_pair[inc].p_reg; + + if(reg_addr < pcie_ctrl_top_addr_lut[serdes_id]) + { + *p_addr_value_pair[inc].p_reg = p_addr_value_pair[inc].value; + } + } + + /* + * Issue a soft-reset to the PCIe controller + */ + inc = 0U; + while(g_pcie_lane_cfg_lut[serdes_id][inc].config_reg_lane_sel != 0) + { + if(FIRST_PCIE_CTRL == g_pcie_lane_cfg_lut[serdes_id][inc].pcie_ctrl_id) + { + serdes_lut[serdes_id]->sys_regs.SERDESIF_SOFT_RESET &= ~PCIE_CTLR_SOFTRESET_MASK; + serdes_lut[serdes_id]->sys_regs.SERDESIF_SOFT_RESET |= PCIE_CTLR_SOFTRESET_MASK; + } + else + { + serdes_lut[serdes_id]->sys_regs.SERDESIF_SOFT_RESET &= ~PCIE2_CTLR_SOFTRESET_MASK; + serdes_lut[serdes_id]->sys_regs.SERDESIF_SOFT_RESET |= PCIE2_CTLR_SOFTRESET_MASK; + } + ++inc; + } +} + +#endif + +/*------------------------------------------------------------------------------ + Retrieve silicon revision from system registers. + */ +static uint32_t get_silicon_revision(void) +{ + uint32_t silicon_revision; + uint32_t device_version; + + device_version = SYSREG->DEVICE_VERSION; + switch(device_version) + { + case 0x0000F802: + silicon_revision = M2S050_REV_A_SILICON; + break; + + case 0x0001F802: + silicon_revision = M2S050_REV_B_SILICON; + break; + + default: + silicon_revision = UNKNOWN_SILICON_REV; + break; + } + + return silicon_revision; +} + +/*------------------------------------------------------------------------------ + Workarounds for various silicon versions. + */ +static void silicon_workarounds(void) +{ + uint32_t silicon_revision; + + silicon_revision = get_silicon_revision(); + + switch(silicon_revision) + { + case M2S050_REV_A_SILICON: + m2s050_rev_a_workarounds(); + break; + + case M2S050_REV_B_SILICON: + /* Fall through. */ + case UNKNOWN_SILICON_REV: + /* Fall through. */ + default: + break; + } +} + +/*------------------------------------------------------------------------------ + Silicon workarounds for M2S050 rev A. + */ +static void m2s050_rev_a_workarounds(void) +{ + /*-------------------------------------------------------------------------- + * Work around a couple of silicon issues: + */ + /* DDR_CLK_EN <- 1 */ + SYSREG->MSSDDR_FACC1_CR |= (uint32_t)1 << DDR_CLK_EN_SHIFT; + + /* CONTROLLER_PLL_INIT <- 0 */ + SYSREG->MSSDDR_FACC1_CR = SYSREG->MSSDDR_FACC1_CR & ~CONTROLLER_PLL_INIT_MASK; +} + +/*------------------------------------------------------------------------------ + Complete clock configuration if requested by Libero. + */ +#if (MSS_SYS_FACC_INIT_BY_CORTEX == 1) +static void complete_clock_config(void) +{ + uint32_t pll_locked; + + /* Wait for fabric PLL to lock. */ + do { + pll_locked = SYSREG->MSSDDR_PLL_STATUS & FAB_PLL_LOCK_MASK; + } while(!pll_locked); + + /* Negate MPLL bypass. */ + SYSREG->MSSDDR_PLL_STATUS_HIGH_CR &= ~FACC_PLL_BYPASS_MASK; + + /* Wait for MPLL to lock. */ + do { + pll_locked = SYSREG->MSSDDR_PLL_STATUS & MPLL_LOCK_MASK; + } while(!pll_locked); + + /* Switch FACC from standby to run mode. */ + SYSREG->MSSDDR_FACC1_CR &= ~FACC_GLMUX_SEL_MASK; + + /* Negate FPGA_SOFTRESET to de-assert MSS_RESET_N_M2F in the fabric */ + SYSREG->SOFT_RST_CR &= ~SYSREG_FPGA_SOFTRESET_MASK; +} +#endif + diff --git a/bsp/smartfusion2/CMSIS/system_m2sxxx.h b/bsp/smartfusion2/CMSIS/system_m2sxxx.h new file mode 100644 index 0000000000000000000000000000000000000000..496c601055f97d0b314ce22efdd7803b29752671 --- /dev/null +++ b/bsp/smartfusion2/CMSIS/system_m2sxxx.h @@ -0,0 +1,49 @@ +/******************************************************************************* + * (c) Copyright 2012-2013 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 CMSIS system initialization. + * + * SVN $Revision: 5280 $ + * SVN $Date: 2013-03-22 20:51:50 +0000 (Fri, 22 Mar 2013) $ + */ + +#ifndef SYSTEM_M2SXXX_H +#define SYSTEM_M2SXXX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Standard CMSIS global variables. */ +extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ + +/* SmartFusion2 specific clocks. */ +extern uint32_t g_FrequencyPCLK0; /*!< Clock frequency of APB bus 0. */ +extern uint32_t g_FrequencyPCLK1; /*!< Clock frequency of APB bus 1. */ +extern uint32_t g_FrequencyPCLK2; /*!< Clock frequency of APB bus 2. */ +extern uint32_t g_FrequencyFIC0; /*!< Clock frequecny of FPGA fabric interface controller 1. */ +extern uint32_t g_FrequencyFIC1; /*!< Clock frequecny of FPGA fabric inteface controller 2. */ +extern uint32_t g_FrequencyFIC64; /*!< Clock frequecny of 64-bit FPGA fabric interface controller. */ + + +/***************************************************************************//** + * The SystemInit() is a standard CMSIS function called during system startup. + * It is meant to perform low level hardware setup such as configuring DDR and + * SERDES controllers. + */ +void SystemInit(void); + +/***************************************************************************//** + * The SystemCoreClockUpdate() is a standard CMSIS function which can be called + * by the application in order to ensure that the SystemCoreClock global + * variable contains the up to date Cortex-M3 core frequency. Calling this + * function also updates the global variables containing the frequencies of the + * APB busses connecting the peripherals. + */ +void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/bsp/smartfusion2/Kconfig b/bsp/smartfusion2/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..94657344a4d83da8c930c31ea4aecb36a60db0b3 --- /dev/null +++ b/bsp/smartfusion2/Kconfig @@ -0,0 +1,26 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "drivers/Kconfig" + +config SOC_SF2_M2S010 + bool + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y diff --git a/bsp/smartfusion2/README.md b/bsp/smartfusion2/README.md new file mode 100644 index 0000000000000000000000000000000000000000..eacfbe611fe3c3898c6432c39881b264c742dd35 --- /dev/null +++ b/bsp/smartfusion2/README.md @@ -0,0 +1,102 @@ +## 移æ¤RT-Thread到Microsemi SmartFusion2系列FPGA芯片 + +### 1. BSP简介 + +ç§»æ¤ RT-Thread æ“作系统到一款 **FPGA 芯片——M2S010** ，该芯片属于 [Microsemi](https://www.microsemi.com/)（现Microchip）SmartFusion2系列，是一款**智能混åˆåž‹FPGA**，片上除了 FPGA Fabric 逻辑部分，还包括一个 **ARM® Cortexâ„¢-M3 内核的 MCU**，主频最高 166MHz ，256KB eNVM，64KB eSRAM，集æˆGPIOã€UARTã€I2Cã€SPIã€CANã€USB等基本外设。 + +> 关于 Microsemi，第三大 FPGA 厂商，原 Actel åŠå¯¼ä½“，2010 年，Microsemi 收购 Actel，2018 年， Microchip 收购 Microsemi。 + +SmartFusion2 内部框图 + +![Microsemi_Smartfusion2_BD](figures/Microsemi_Smartfusion2_BD.jpg) + +### 2. å¤–è®¾æ”¯æŒ + +移æ¤äº† RT-Thread 内核，支æŒçº¿ç¨‹è°ƒåº¦ã€çº¿ç¨‹é—´åŒæ­¥å’Œé€šä¿¡ç­‰ï¼Œç›®å‰å·²ç»å®Œæˆäº†PINã€Serial设备驱动，FinSH组件默认使用uart0设备。 + +| **片上外设** | **支æŒæƒ…况** | +| :----------------- | :----------: | +| GPIO | æ”¯æŒ | +| UART | æ”¯æŒ | +| SPI | æš‚ä¸æ”¯æŒ | +| I2C | æš‚ä¸æ”¯æŒ | +| RTC | æš‚ä¸æ”¯æŒ | +| USB | æš‚ä¸æ”¯æŒ | + +### 3. scons构建系统 + +通过加入`rtconfig.py`，`SConstruct`，`SConscript`文件，å¯æ”¯æŒscons构建系统，å¯ä»¥è¾“å…¥`scons`调用env工具中包å«çš„arm-gcc编译器构建工程，支æŒä»¥ä¸‹scons命令： + +- `scons`：使用arm-gcc编译BSP +- `scons -c`：清除执行 scons 时生æˆçš„临时文件和目标文件。 +- `scons --target=mdk4`：é‡æ–°ç”ŸæˆKeil MDK4环境下的工程。 +- `scons --target=mdk5`：é‡æ–°ç”ŸæˆKeil MDK5环境下的工程。 +- `scons --dist`：打包BSP工程，包括RT-Threadæºç åŠBSP相关工程文件。 + +添加Kconfig文件，用于生æˆrtconfig.h。 + +### 4. 使用说明 + +#### 4.1 FPGA 工程设计 + +FPGA 部分使用 SmartDesign 图形化设计，ä¸éœ€è¦å†™ HDL 代ç ï¼Œæ—¶é’Ÿæ¥è‡ªå¤–部 50M 晶体输入，PLL å€é¢‘ 100M æ供给 MCU 使用，顶层é…置如下图所示： + +![](figures/top_sd.jpg) + +MSS 部分仅使用到了GPIO å’ŒUART，GPIO_0é…ç½®æˆè¾“出输出模å¼ç”¨äºŽé©±åŠ¨LED。 + +é…置完æˆçš„ FPGA 工程文件下载：[sf2_fpga_prj.rar](https://wcc-blog.oss-cn-beijing.aliyuncs.com/Libero/RT-Thread/sf2_fpga_prj.rar) + +#### 4.2 ARM 程åºè®¾è®¡ + +ARM 程åºä½¿ç”¨ Keil MDK 5.26 å¼€å‘，需è¦å®‰è£… M2S 系列芯片支æŒåŒ…：[Microsemi.M2Sxxx.1.0.64.pack](http://www.actel-ip.com/repositories/CMSIS-Pack/Microsemi.M2Sxxx.1.0.64.pack) + +如果官网下载失败，å¯ä»¥åˆ°ä»¥ä¸‹åœ°å€ä¸‹è½½ï¼š[Microsemi.M2Sxxx.1.0.64.pack](https://wcc-blog.oss-cn-beijing.aliyuncs.com/Libero/RT-Thread/Microsemi.M2Sxxx.1.0.64.pack) + +在官方生æˆçš„示例工程目录下，添加 RT-Thread 相关组件，并实现一些对接函数，最终的文件结构： + +![](figures/files.jpg) + +### 5. 下载和è¿è¡Œ + +为了能使用 ARM 调试器连接到 ARM 内核，而ä¸æ˜¯ FPGA，需è¦æŠŠ JTAG_SEL 引脚置为低电平。使用 ARM 调试器，如 JLink，对应连接 JTAG å£çš„ TMSã€TCKã€GND 引脚，如果连接正常，å¯ä»¥æ£€æµ‹åˆ° ARM 芯片，如下图所示： + +![](figures/jlink-ob.jpg) + +é…置对应的 Flash 编程算法： + +![](figures/flash.jpg) + +下载完æˆï¼š + +![](figures/finished.jpg) + +如果编译 & 烧写无误，下载完æˆæˆ–者按下å¤ä½æŒ‰é”®ä¹‹åŽï¼Œä¼šåœ¨ä¸²å£ä¸Šçœ‹åˆ° RT-Thread çš„å¯åŠ¨ LOG ä¿¡æ¯ï¼š + +```c + \ | / +- RT - Thread Operating System + / | \ 4.0.3 build Jun 2 2020 + 2006 - 2020 Copyright by rt-thread team +msh > +``` + +![](figures/log.jpg) + +### 6. 注æ„事项 + +- FPGA å¼€å‘环境基于 Libero V11.8.2.4，å‘上兼容，ä¸æ”¯æŒä½Žç‰ˆæœ¬ IDE。 +- ARM å¼€å‘环境基于 Keil MDK 5.26，如果使用SoftConsole IDE ，需è¦ä¿®æ”¹ `libcpu` 内的文件。 +- 调试内部 ARM 核，需è¦æŠŠ JTAG_SEL 拉低，å¦åˆ™è°ƒè¯•å™¨è¿žæŽ¥ä¸ä¸Šã€‚ +- 使用 SoftConsole å¼€å‘环境å¯ä»¥ç›´æŽ¥ä½¿ç”¨å®˜æ–¹çš„ Flash Pro 调试器进行 ARM 程åºçš„调试。 +- 内核时钟需è¦å’Œ FPGA 中 MSS é…置的对应，Libero 自动生æˆçš„时钟文件，å¯ä»¥ç›´æŽ¥æ›¿æ¢`bsp\smartfusion2\libraries\sys_config`文件夹下的文件 。 + +### 7. å‚考资料 + +- [学习路线 - RT-Thread 文档中心](https://www.rt-thread.org/document/site/) +- [Microsemi Libero系列中文教程](https://blog.csdn.net/whik1194/article/details/102901710) + +### 8. è”系我 + +- Github：[whik](https://github.com/whik) +- E-Mail：wangchao149@foxmail.com diff --git a/bsp/smartfusion2/SConscript b/bsp/smartfusion2/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..20f7689c53ca71a676748f79187f9764065466c5 --- /dev/null +++ b/bsp/smartfusion2/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/smartfusion2/SConstruct b/bsp/smartfusion2/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..d34a57a76db1695a320af9fe1825e6f5dc548178 --- /dev/null +++ b/bsp/smartfusion2/SConstruct @@ -0,0 +1,35 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rtthread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +Export('RTT_ROOT') +Export('rtconfig') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/smartfusion2/applications/SConscript b/bsp/smartfusion2/applications/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..bb108f27db582d053b4c593629912ca0466593c4 --- /dev/null +++ b/bsp/smartfusion2/applications/SConscript @@ -0,0 +1,10 @@ +from building import * +import rtconfig + +cwd = GetCurrentDir() +CPPPATH = [cwd] +src = Glob('*.c') + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/smartfusion2/applications/link.sct b/bsp/smartfusion2/applications/link.sct new file mode 100644 index 0000000000000000000000000000000000000000..12075206ce1736e8e935ab705f59a19a8e386438 --- /dev/null +++ b/bsp/smartfusion2/applications/link.sct @@ -0,0 +1,16 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x00000000 0x00040000 { ; load region size_region + ER_IROM1 0x00000000 0x00040000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + .ANY (+XO) + } + RW_IRAM1 0x20000000 0x00010000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/smartfusion2/applications/main.c b/bsp/smartfusion2/applications/main.c new file mode 100644 index 0000000000000000000000000000000000000000..05e12415ead2fe65d9dabeb52c34b1bf884bc1bc --- /dev/null +++ b/bsp/smartfusion2/applications/main.c @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-08-06 whik first version + */ +#include +#include +#include + +#define LED_PIN 0 + +int main(void) +{ + int count = 1; + + rt_pin_mode(LED_PIN, PIN_MODE_OUTPUT); + + while(count++) + { + rt_pin_write(LED_PIN, PIN_HIGH); + rt_thread_mdelay(500); + + rt_pin_write(LED_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/smartfusion2/board/SConscript b/bsp/smartfusion2/board/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..bb108f27db582d053b4c593629912ca0466593c4 --- /dev/null +++ b/bsp/smartfusion2/board/SConscript @@ -0,0 +1,10 @@ +from building import * +import rtconfig + +cwd = GetCurrentDir() +CPPPATH = [cwd] +src = Glob('*.c') + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/smartfusion2/board/board.c b/bsp/smartfusion2/board/board.c new file mode 100644 index 0000000000000000000000000000000000000000..a024a8b167c0304393d95c6a7cc559509ef6e74d --- /dev/null +++ b/bsp/smartfusion2/board/board.c @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-08-06 whik first version + */ + +#include +#include +#include + +#define _SCB_BASE (0xE000E010UL) +#define _SYSTICK_CTRL (*(rt_uint32_t *)(_SCB_BASE + 0x0)) +#define _SYSTICK_LOAD (*(rt_uint32_t *)(_SCB_BASE + 0x4)) +#define _SYSTICK_VAL (*(rt_uint32_t *)(_SCB_BASE + 0x8)) +#define _SYSTICK_CALIB (*(rt_uint32_t *)(_SCB_BASE + 0xC)) +#define _SYSTICK_PRI (*(rt_uint8_t *)(0xE000ED23UL)) + +extern void SystemCoreClockUpdate(void); +extern uint32_t SystemCoreClock; + +static uint32_t _SysTick_Config(rt_uint32_t ticks) +{ + if ((ticks - 1) > 0xFFFFFF) + { + return 1; + } + + _SYSTICK_LOAD = ticks - 1; + _SYSTICK_PRI = 0xFF; + _SYSTICK_VAL = 0; + _SYSTICK_CTRL = 0x07; + + return 0; +} + +#if defined(RT_USING_USER_MAIN) && defined(RT_USING_HEAP) +#define RT_HEAP_SIZE 1024 +static uint32_t rt_heap[RT_HEAP_SIZE]; // heap default size: 4K(1024 * 4) +RT_WEAK void *rt_heap_begin_get(void) +{ + return rt_heap; +} + +RT_WEAK void *rt_heap_end_get(void) +{ + return rt_heap + RT_HEAP_SIZE; +} +#endif + +/* This function will initial your board. */ +void rt_hw_board_init() +{ + /* System Clock Update */ + SystemCoreClockUpdate(); + + /* System Tick Configuration */ + _SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND); + + /* Call components board initial (use INIT_BOARD_EXPORT()) */ +#ifdef RT_USING_COMPONENTS_INIT + rt_components_board_init(); +#endif + +#ifdef RT_USING_CONSOLE + rt_console_set_device(RT_CONSOLE_DEVICE_NAME); +#endif + +#if defined(RT_USING_USER_MAIN) && defined(RT_USING_HEAP) + rt_system_heap_init(rt_heap_begin_get(), rt_heap_end_get()); +#endif +} + +void SysTick_Handler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + rt_tick_increase(); + + /* leave interrupt */ + rt_interrupt_leave(); +} diff --git a/bsp/smartfusion2/board/config.c b/bsp/smartfusion2/board/config.c new file mode 100644 index 0000000000000000000000000000000000000000..3e096a8fa39673c270464ef24a3d8778d6e77dc2 --- /dev/null +++ b/bsp/smartfusion2/board/config.c @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-08-06 whik first version + */ +#include "config.h" + +/* hardware initialization */ +void boardInit(void) +{ + /* disable watchdog timer */ + SYSREG->WDOG_CR = 0; +} +INIT_BOARD_EXPORT(boardInit); + +/* custom finish command */ +extern uint32_t SystemCoreClock; +void sayHello(void) +{ + rt_kprintf("Hello RT-Thread! By Microsemi SmartFusion2 Family FPGA-M2S010.\r\n"); + rt_kprintf("MSS System Core Clock: %d Hz.\r\n", SystemCoreClock); +} +MSH_CMD_EXPORT(sayHello, "say hello to console"); diff --git a/bsp/smartfusion2/board/config.h b/bsp/smartfusion2/board/config.h new file mode 100644 index 0000000000000000000000000000000000000000..fc189395fd8545803ad72fdea2e6b5112ac896d2 --- /dev/null +++ b/bsp/smartfusion2/board/config.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-08-06 whik first version + */ +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#include "mss_gpio.h" +#include "mss_uart.h" + +#include +#include + +void sw0_isr(void *args); +void sw1_isr(void *args); +void boardInit(void); +void sayHello(void); + +#endif diff --git a/bsp/smartfusion2/drivers/Kconfig b/bsp/smartfusion2/drivers/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..eebc758c08c7376f587889d9b8885b1a9f4d22fb --- /dev/null +++ b/bsp/smartfusion2/drivers/Kconfig @@ -0,0 +1,35 @@ +menu "Hardware Drivers Config" + + menu "On-chip Peripheral Drivers" + + menu "UART Drivers" + config BSP_USING_UART0 + bool "Enable MSS_UART0" + select RT_USING_SERIAL + default y + help + config MSS_UART0 + + config BSP_USING_UART1 + bool "Enable MSS_UART1" + select RT_USING_SERIAL + default y + help + config MSS_UART1 + + config RT_CONSOLE_DEVICE_NAME + string "the device name for console" + default "uart0" + endmenu + + menu "GPIO Drivers" + config BSP_USING_GPIO + bool "Enable MSS_GPIO" + select RT_USING_PIN + default y + help + config MSS_GPIO + endmenu + endmenu + +endmenu diff --git a/bsp/smartfusion2/drivers/SConscript b/bsp/smartfusion2/drivers/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..658ebee57b17025b9c87663b57b6e3ea27c2679e --- /dev/null +++ b/bsp/smartfusion2/drivers/SConscript @@ -0,0 +1,16 @@ +from building import * + +cwd = GetCurrentDir() +src = [] + +# add serial driver code +if GetDepend('BSP_USING_UART0') or GetDepend('BSP_USING_UART1'): + src += ['drv_uart.c'] +if GetDepend('BSP_USING_GPIO'): + src += ['drv_gpio.c'] + +CPPPATH = [cwd] + +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/smartfusion2/drivers/drv_gpio.c b/bsp/smartfusion2/drivers/drv_gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..063deb08f0c0c95c8f763dbe61a6bbed5fbf33cb --- /dev/null +++ b/bsp/smartfusion2/drivers/drv_gpio.c @@ -0,0 +1,442 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-07-09 whik first version + */ +#include +#include +#include + +#include "drv_gpio.h" + +#ifdef BSP_USING_GPIO + +static struct rt_pin_irq_hdr sf2_pin_irq_hdr_tab[] = +{ + /* pin, hdr, mode, args */ + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, + {-1, 0, RT_NULL, RT_NULL}, +}; + +/* configure an individual GPIO port */ +static void sf2_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode) +{ + uint32_t config; + switch (mode) + { + case PIN_MODE_OUTPUT: + config = MSS_GPIO_OUTPUT_MODE; + break; + case PIN_MODE_INPUT: + config = MSS_GPIO_INPUT_MODE; + break; + default: + config = MSS_GPIO_INOUT_MODE; + break; + } + MSS_GPIO_config((mss_gpio_id_t )pin, config); +} + +static int sf2_pin_read(rt_device_t dev, rt_base_t pin) +{ + uint32_t value; + value = MSS_GPIO_get_inputs() & (1< +#include +#include + +#include "drv_uart.h" + +struct sf2_uart +{ + mss_uart_instance_t *uart; + IRQn_Type irq; +}; + +struct sf2_uart uart0= +{ + &g_mss_uart0, + UART0_IRQn, +}; +struct rt_serial_device serial0; + +void uart0_rx_handler(mss_uart_instance_t *this_uart) +{ + /* enter interrupt */ + rt_interrupt_enter(); + rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND); + /* leave interrupt */ + rt_interrupt_leave(); +} + +struct sf2_uart uart1= +{ + &g_mss_uart1, + UART1_IRQn, +}; + +struct rt_serial_device serial1; +void uart1_rx_handler(mss_uart_instance_t *this_uart) +{ + /* enter interrupt */ + rt_interrupt_enter(); + rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND); + /* leave interrupt */ + rt_interrupt_leave(); +} + +static rt_err_t sf2_uart_configure(struct rt_serial_device *serial, + struct serial_configure *cfg) +{ + uint32_t baudRate; + uint8_t datBits, parity, stopBits; + uint8_t config; + struct sf2_uart *uart; + + RT_ASSERT(serial != RT_NULL); + RT_ASSERT(cfg != RT_NULL); + + uart = (struct sf2_uart *)serial->parent.user_data; + + switch(cfg->data_bits) + { + case DATA_BITS_5: datBits = MSS_UART_DATA_5_BITS; break; + case DATA_BITS_6: datBits = MSS_UART_DATA_6_BITS; break; + case DATA_BITS_7: datBits = MSS_UART_DATA_7_BITS; break; + case DATA_BITS_8: datBits = MSS_UART_DATA_8_BITS; break; + default: datBits = MSS_UART_DATA_8_BITS; break; + } + switch(cfg->parity) + { + case PARITY_NONE: parity = MSS_UART_NO_PARITY; break; + case PARITY_EVEN: parity = MSS_UART_EVEN_PARITY; break; + case PARITY_ODD : parity = MSS_UART_ODD_PARITY; break; + default : parity = MSS_UART_NO_PARITY; break; + } + switch(cfg->stop_bits) + { + case STOP_BITS_1: stopBits = MSS_UART_ONE_STOP_BIT; break; + case STOP_BITS_2: stopBits = MSS_UART_TWO_STOP_BITS; break; + case STOP_BITS_3: stopBits = MSS_UART_ONEHALF_STOP_BIT; break; + default : stopBits = MSS_UART_ONE_STOP_BIT; + } + + baudRate = cfg->baud_rate; + config = datBits | parity | stopBits; + + MSS_UART_init(uart->uart, baudRate, config); + if(uart->uart == &g_mss_uart0) + MSS_UART_set_rx_handler(uart->uart, uart0_rx_handler, MSS_UART_FIFO_SINGLE_BYTE); + else + MSS_UART_set_rx_handler(uart->uart, uart1_rx_handler, MSS_UART_FIFO_SINGLE_BYTE); + + return RT_EOK; +} + +static rt_err_t sf2_uart_control(struct rt_serial_device *serial, + int cmd, void *arg) +{ + struct sf2_uart* uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct sf2_uart*)serial->parent.user_data; + + switch (cmd) + { + case RT_DEVICE_CTRL_CLR_INT: + NVIC_DisableIRQ(uart->irq); + break; + case RT_DEVICE_CTRL_SET_INT: + NVIC_EnableIRQ(uart->irq); + break; + } + + return RT_EOK; +} + +static int sf2_uart_putc(struct rt_serial_device *serial, char c) +{ + struct sf2_uart* uart; + uint32_t tx_ready; + + RT_ASSERT(serial != RT_NULL); + + uart = (struct sf2_uart*)serial->parent.user_data; + + do { + tx_ready = uart->uart->hw_reg->LSR & 0x20u; + } while(!tx_ready); + uart->uart->hw_reg->THR = c; + + return 1; +} + +static int sf2_uart_getc(struct rt_serial_device *serial) +{ + int ch = -1; + uint8_t err_status; + struct sf2_uart* uart; + + RT_ASSERT(serial != RT_NULL); + uart = (struct sf2_uart*)serial->parent.user_data; + + err_status = MSS_UART_get_rx_status(uart->uart); + if(MSS_UART_NO_ERROR == err_status) + MSS_UART_get_rx(uart->uart, (uint8_t *)&ch, 1); + + return ch; +} + +static const struct rt_uart_ops sf2_uart_ops = +{ + sf2_uart_configure, + sf2_uart_control, + sf2_uart_putc, + sf2_uart_getc, +}; + +int rt_hw_uart_init(void) +{ + rt_err_t result = RT_EOK; + struct sf2_uart* uart; + struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT; + +#ifdef BSP_USING_UART0 + uart = &uart0; + serial0.ops = &sf2_uart_ops; + /* default config: 115200, 8, no, 1 */ + serial0.config = config; + result = rt_hw_serial_register(&serial0, "uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart); + RT_ASSERT(result == RT_EOK); +#endif + +#ifdef BSP_USING_UART1 + uart = &uart1; + serial1.ops = &sf2_uart_ops; + /* default config: 115200, 8, no, 1 */ + serial1.config = config; + result = rt_hw_serial_register(&serial1, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart); + RT_ASSERT(result == RT_EOK); +#endif + return result; +} +INIT_BOARD_EXPORT(rt_hw_uart_init); diff --git a/bsp/smartfusion2/drivers/drv_uart.h b/bsp/smartfusion2/drivers/drv_uart.h new file mode 100644 index 0000000000000000000000000000000000000000..ff8f796e03e21724a466561e0cd40a9638893a16 --- /dev/null +++ b/bsp/smartfusion2/drivers/drv_uart.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2006-2020, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-08-06 whik first version + */ +#ifndef __DRV_UART_H__ +#define __DRV_UART_H__ + +#include "mss_uart.h" +void uart_rx_handler(mss_uart_instance_t *this_uart); + +void uart0_rx_handler(mss_uart_instance_t * this_uart); +void uart1_rx_handler(mss_uart_instance_t * this_uart); +int rt_hw_uart_init(void); + +#endif diff --git a/bsp/smartfusion2/figures/Microsemi_Smartfusion2_BD.jpg b/bsp/smartfusion2/figures/Microsemi_Smartfusion2_BD.jpg new file mode 100644 index 0000000000000000000000000000000000000000..a826bd8b3c9e1f1400ecab78e5be2c5d8e465768 Binary files /dev/null and b/bsp/smartfusion2/figures/Microsemi_Smartfusion2_BD.jpg differ diff --git a/bsp/smartfusion2/figures/files.jpg b/bsp/smartfusion2/figures/files.jpg new file mode 100644 index 0000000000000000000000000000000000000000..86d6bd219e385e0f116691dd29774cffda829ca8 Binary files /dev/null and b/bsp/smartfusion2/figures/files.jpg differ diff --git a/bsp/smartfusion2/figures/finished.jpg b/bsp/smartfusion2/figures/finished.jpg new file mode 100644 index 0000000000000000000000000000000000000000..1836582938b7baf08ae6eb104a4ceee76deca15c Binary files /dev/null and b/bsp/smartfusion2/figures/finished.jpg differ diff --git a/bsp/smartfusion2/figures/flash.jpg b/bsp/smartfusion2/figures/flash.jpg new file mode 100644 index 0000000000000000000000000000000000000000..f534bb76c2004a42c9d73871c5de24736546ba18 Binary files /dev/null and b/bsp/smartfusion2/figures/flash.jpg differ diff --git a/bsp/smartfusion2/figures/jlink-ob.jpg b/bsp/smartfusion2/figures/jlink-ob.jpg new file mode 100644 index 0000000000000000000000000000000000000000..1f75b1e2b1cbf0cb59f4d6baf9b34275fddf4ea2 Binary files /dev/null and b/bsp/smartfusion2/figures/jlink-ob.jpg differ diff --git a/bsp/smartfusion2/figures/log.jpg b/bsp/smartfusion2/figures/log.jpg new file mode 100644 index 0000000000000000000000000000000000000000..b4211ea6b54a1f5c186c7877910d4db574989a13 Binary files /dev/null and b/bsp/smartfusion2/figures/log.jpg differ diff --git a/bsp/smartfusion2/figures/top_sd.jpg b/bsp/smartfusion2/figures/top_sd.jpg new file mode 100644 index 0000000000000000000000000000000000000000..a2b0fccbfccd74fb4746d0fb1509e9a8c77164eb Binary files /dev/null and b/bsp/smartfusion2/figures/top_sd.jpg differ diff --git a/bsp/smartfusion2/libraries/SConscript b/bsp/smartfusion2/libraries/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..da21728b90337fa88129debace1e496ca7255421 --- /dev/null +++ b/bsp/smartfusion2/libraries/SConscript @@ -0,0 +1,16 @@ +from building import * +import rtconfig + +cwd = GetCurrentDir() + +src = [cwd + '/sys_config/sys_config.c'] +src += [cwd + '/mss_gpio/mss_gpio.c'] +src += [cwd + '/mss_uart/mss_uart.c'] + +CPPPATH = [cwd+'/sys_config'] +CPPPATH += [cwd+'/mss_gpio'] +CPPPATH += [cwd+'/mss_uart'] + +group = DefineGroup('Libraries', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.c b/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.c new file mode 100644 index 0000000000000000000000000000000000000000..11dbc21fee03c8098287f7fb3f475ed1e227384d --- /dev/null +++ b/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.c @@ -0,0 +1,298 @@ +/******************************************************************************* + * (c) Copyright 2008-2015 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 microcontroller subsystem GPIO bare metal driver implementation. + * + * SVN $Revision: 7749 $ + * SVN $Date: 2015-09-04 14:32:09 +0530 (Fri, 04 Sep 2015) $ + */ +#include "mss_gpio.h" +#include "../../CMSIS/mss_assert.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/*-------------------------------------------------------------------------*//** + * Defines. + */ +#define GPIO_INT_ENABLE_MASK ((uint32_t)0x00000008uL) +#define OUTPUT_BUFFER_ENABLE_MASK 0x00000004u + +#define NB_OF_GPIO ((uint32_t)32) + +/*-------------------------------------------------------------------------*//** + * Lookup table of GPIO configuration registers address indexed on GPIO ID. + */ +static uint32_t volatile * const g_config_reg_lut[NB_OF_GPIO] = +{ + &(GPIO->GPIO_0_CFG), + &(GPIO->GPIO_1_CFG), + &(GPIO->GPIO_2_CFG), + &(GPIO->GPIO_3_CFG), + &(GPIO->GPIO_4_CFG), + &(GPIO->GPIO_5_CFG), + &(GPIO->GPIO_6_CFG), + &(GPIO->GPIO_7_CFG), + &(GPIO->GPIO_8_CFG), + &(GPIO->GPIO_9_CFG), + &(GPIO->GPIO_10_CFG), + &(GPIO->GPIO_11_CFG), + &(GPIO->GPIO_12_CFG), + &(GPIO->GPIO_13_CFG), + &(GPIO->GPIO_14_CFG), + &(GPIO->GPIO_15_CFG), + &(GPIO->GPIO_16_CFG), + &(GPIO->GPIO_17_CFG), + &(GPIO->GPIO_18_CFG), + &(GPIO->GPIO_19_CFG), + &(GPIO->GPIO_20_CFG), + &(GPIO->GPIO_21_CFG), + &(GPIO->GPIO_22_CFG), + &(GPIO->GPIO_23_CFG), + &(GPIO->GPIO_24_CFG), + &(GPIO->GPIO_25_CFG), + &(GPIO->GPIO_26_CFG), + &(GPIO->GPIO_27_CFG), + &(GPIO->GPIO_28_CFG), + &(GPIO->GPIO_29_CFG), + &(GPIO->GPIO_30_CFG), + &(GPIO->GPIO_31_CFG) +}; + +/*-------------------------------------------------------------------------*//** + * Lookup table of Cortex-M3 GPIO interrupt number indexed on GPIO ID. + */ +static const IRQn_Type g_gpio_irqn_lut[NB_OF_GPIO] = +{ + GPIO0_IRQn, + GPIO1_IRQn, + GPIO2_IRQn, + GPIO3_IRQn, + GPIO4_IRQn, + GPIO5_IRQn, + GPIO6_IRQn, + GPIO7_IRQn, + GPIO8_IRQn, + GPIO9_IRQn, + GPIO10_IRQn, + GPIO11_IRQn, + GPIO12_IRQn, + GPIO13_IRQn, + GPIO14_IRQn, + GPIO15_IRQn, + GPIO16_IRQn, + GPIO17_IRQn, + GPIO18_IRQn, + GPIO19_IRQn, + GPIO20_IRQn, + GPIO21_IRQn, + GPIO22_IRQn, + GPIO23_IRQn, + GPIO24_IRQn, + GPIO25_IRQn, + GPIO26_IRQn, + GPIO27_IRQn, + GPIO28_IRQn, + GPIO29_IRQn, + GPIO30_IRQn, + GPIO31_IRQn +}; + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_init + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_init( void ) +{ + uint32_t inc; + + /* reset MSS GPIO hardware */ + SYSREG->SOFT_RST_CR |= SYSREG_GPIO_SOFTRESET_MASK; + SYSREG->SOFT_RST_CR |= (SYSREG_GPIO_7_0_SOFTRESET_MASK | + SYSREG_GPIO_15_8_SOFTRESET_MASK | + SYSREG_GPIO_23_16_SOFTRESET_MASK | + SYSREG_GPIO_31_24_SOFTRESET_MASK); + + /* Clear any previously pended MSS GPIO interrupt */ + for(inc = 0U; inc < NB_OF_GPIO; ++inc) + { + NVIC_DisableIRQ(g_gpio_irqn_lut[inc]); + NVIC_ClearPendingIRQ(g_gpio_irqn_lut[inc]); + } + /* Take MSS GPIO hardware out of reset. */ + SYSREG->SOFT_RST_CR &= ~(SYSREG_GPIO_7_0_SOFTRESET_MASK | + SYSREG_GPIO_15_8_SOFTRESET_MASK | + SYSREG_GPIO_23_16_SOFTRESET_MASK | + SYSREG_GPIO_31_24_SOFTRESET_MASK); + SYSREG->SOFT_RST_CR &= ~SYSREG_GPIO_SOFTRESET_MASK; +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_config + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_config +( + mss_gpio_id_t port_id, + uint32_t config +) +{ + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + *(g_config_reg_lut[gpio_idx]) = config; + } +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_set_output + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_set_output +( + mss_gpio_id_t port_id, + uint8_t value +) +{ + uint32_t gpio_setting; + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + gpio_setting = GPIO->GPIO_OUT; + gpio_setting &= ~((uint32_t)0x01u << gpio_idx); + gpio_setting |= ((uint32_t)value & 0x01u) << gpio_idx; + GPIO->GPIO_OUT = gpio_setting; + } +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_drive_inout + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_drive_inout +( + mss_gpio_id_t port_id, + mss_gpio_inout_state_t inout_state +) +{ + uint32_t outputs_state; + uint32_t config; + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + switch(inout_state) + { + case MSS_GPIO_DRIVE_HIGH: + /* Set output high */ + outputs_state = GPIO->GPIO_OUT; + outputs_state |= (uint32_t)1 << gpio_idx; + GPIO->GPIO_OUT = outputs_state; + /* Enable output buffer */ + config = *(g_config_reg_lut[gpio_idx]); + config |= OUTPUT_BUFFER_ENABLE_MASK; + *(g_config_reg_lut[gpio_idx]) = config; + break; + + case MSS_GPIO_DRIVE_LOW: + /* Set output low */ + outputs_state = GPIO->GPIO_OUT; + outputs_state &= ~((uint32_t)((uint32_t)1 << gpio_idx)); + GPIO->GPIO_OUT = outputs_state; + /* Enable output buffer */ + config = *(g_config_reg_lut[gpio_idx]); + config |= OUTPUT_BUFFER_ENABLE_MASK; + *(g_config_reg_lut[gpio_idx]) = config; + break; + + case MSS_GPIO_HIGH_Z: + /* Disable output buffer */ + config = *(g_config_reg_lut[gpio_idx]); + config &= ~OUTPUT_BUFFER_ENABLE_MASK; + *(g_config_reg_lut[gpio_idx]) = config; + break; + + default: + ASSERT(0); + break; + } + } +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_enable_irq + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_enable_irq +( + mss_gpio_id_t port_id +) +{ + uint32_t cfg_value; + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + cfg_value = *(g_config_reg_lut[gpio_idx]); + *(g_config_reg_lut[gpio_idx]) = (cfg_value | GPIO_INT_ENABLE_MASK); + NVIC_EnableIRQ(g_gpio_irqn_lut[gpio_idx]); + } +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_disable_irq + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_disable_irq +( + mss_gpio_id_t port_id +) +{ + uint32_t cfg_value; + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + cfg_value = *(g_config_reg_lut[gpio_idx]); + *(g_config_reg_lut[gpio_idx]) = (cfg_value & ~GPIO_INT_ENABLE_MASK); + } +} + +/*-------------------------------------------------------------------------*//** + * MSS_GPIO_clear_irq + * See "mss_gpio.h" for details of how to use this function. + */ +void MSS_GPIO_clear_irq +( + mss_gpio_id_t port_id +) +{ + uint32_t gpio_idx = (uint32_t)port_id; + + ASSERT(gpio_idx < NB_OF_GPIO); + + if(gpio_idx < NB_OF_GPIO) + { + GPIO->GPIO_IRQ = ((uint32_t)1) << gpio_idx; + } + __ASM volatile ("dsb"); + +} + +#ifdef __cplusplus +} +#endif + diff --git a/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.h b/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.h new file mode 100644 index 0000000000000000000000000000000000000000..58c98f85562e7d3118b23aada8fca2e95a6e71ad --- /dev/null +++ b/bsp/smartfusion2/libraries/mss_gpio/mss_gpio.h @@ -0,0 +1,507 @@ +/******************************************************************************* + * (c) Copyright 2008-2015 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 Microcontroller Subsystem GPIO bare metal software driver public + * API. + * + * SVN $Revision: 7748 $ + * SVN $Date: 2015-09-04 11:36:30 +0530 (Fri, 04 Sep 2015) $ + */ + +/*=========================================================================*//** + @mainpage SmartFusion2 MSS GPIO Bare Metal Driver. + + @section intro_sec Introduction + The SmartFusion2 Microcontroller Subsystem (MSS) includes a block of 32 general + purpose input/outputs (GPIO). + This software driver provides a set of functions for controlling the MSS GPIO + block as part of a bare metal system where no operating system is available. + This driver can be adapted for use as part of an operating system but the + implementation of the adaptation layer between this driver and the operating + system's driver model is outside the scope of this driver. + + @section hw_dependencies Hardware Flow Dependencies + The configuration of all features of the MSS GPIOs is covered by this driver + with the exception of the SmartFusion2 IOMUX configuration. SmartFusion2 + allows multiple non-concurrent uses of some external pins through IOMUX + configuration. This feature allows optimization of external pin usage by + assigning external pins for use by either the microcontroller subsystem or the + FPGA fabric. The MSS GPIOs share SmartFusion2 device external pins with the + FPGA fabric and with other MSS peripherals via an IOMUX. The MSS GPIO ports + can alternatively be routed to the FPGA fabric through an IOMUX. + The IOMUXs are configured using the SmartFusion2 MSS configurator tool. You + must ensure that the MSS GPIOs are enabled and configured in the SmartFusion2 + MSS configurator if you wish to use them. For more information on IOMUXs, + refer to the IOMUX section of the SmartFusion2 Microcontroller Subsystem (MSS) + User’s Guide. + The base address, register addresses and interrupt number assignment for the + MSS GPIO block are defined as constants in the SmartFusion2 CMSIS HAL. You + must ensure that the latest SmartFusion2 CMSIS HAL is included in the project + settings of the software tool chain used to build your project and that it is + generated into your project. + + @section theory_op Theory of Operation + The MSS GPIO driver functions are grouped into the following categories: + - Initialization + - Configuration + - Reading and setting GPIO state + - Interrupt control + + Initialization + The MSS GPIO driver is initialized through a call to the MSS_GPIO_init() + function. The MSS_GPIO_init() function must be called before any other MSS + GPIO driver functions can be called. + + Configuration + Each GPIO port is individually configured through a call to the + MSS_GPIO_config() function. Configuration includes deciding if a GPIO port + will be used as an input, an output or both. GPIO ports configured as inputs + can be further configured to generate interrupts based on the input's state. + Interrupts can be level or edge sensitive. + + Reading and Setting GPIO State + The state of the GPIO ports can be read and set using the following functions: + - MSS_GPIO_get_inputs() + - MSS_GPIO_get_outputs() + - MSS_GPIO_set_outputs() + - MSS_GPIO_set_output() + - MSS_GPIO_drive_inout() + + Interrupt Control + Interrupts generated by GPIO ports configured as inputs are controlled using + the following functions: + - MSS_GPIO_enable_irq() + - MSS_GPIO_disable_irq() + - MSS_GPIO_clear_irq() + + *//*=========================================================================*/ +#ifndef MSS_GPIO_H_ +#define MSS_GPIO_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "../../CMSIS/m2sxxx.h" + +/*-------------------------------------------------------------------------*//** + The mss_gpio_id_t enumeration is used to identify individual GPIO ports as an + argument to functions: + - MSS_GPIO_config() + - MSS_GPIO_set_output() and MSS_GPIO_drive_inout() + - MSS_GPIO_enable_irq(), MSS_GPIO_disable_irq() and MSS_GPIO_clear_irq() + */ +typedef enum __mss_gpio_id_t +{ + MSS_GPIO_0 = 0, + MSS_GPIO_1 = 1, + MSS_GPIO_2 = 2, + MSS_GPIO_3 = 3, + MSS_GPIO_4 = 4, + MSS_GPIO_5 = 5, + MSS_GPIO_6 = 6, + MSS_GPIO_7 = 7, + MSS_GPIO_8 = 8, + MSS_GPIO_9 = 9, + MSS_GPIO_10 = 10, + MSS_GPIO_11 = 11, + MSS_GPIO_12 = 12, + MSS_GPIO_13 = 13, + MSS_GPIO_14 = 14, + MSS_GPIO_15 = 15, + MSS_GPIO_16 = 16, + MSS_GPIO_17 = 17, + MSS_GPIO_18 = 18, + MSS_GPIO_19 = 19, + MSS_GPIO_20 = 20, + MSS_GPIO_21 = 21, + MSS_GPIO_22 = 22, + MSS_GPIO_23 = 23, + MSS_GPIO_24 = 24, + MSS_GPIO_25 = 25, + MSS_GPIO_26 = 26, + MSS_GPIO_27 = 27, + MSS_GPIO_28 = 28, + MSS_GPIO_29 = 29, + MSS_GPIO_30 = 30, + MSS_GPIO_31 = 31 +} mss_gpio_id_t; + +/*-------------------------------------------------------------------------*//** + These constant definitions are used as an argument to the + MSS_GPIO_set_outputs() function to identify GPIO ports. A logical OR of these + constants can be used to specify multiple GPIO ports. + These definitions can also be used to identify GPIO ports through logical + operations on the return value of the MSS_GPIO_get_inputs() function. + */ +#define MSS_GPIO_0_MASK 0x00000001uL +#define MSS_GPIO_1_MASK 0x00000002uL +#define MSS_GPIO_2_MASK 0x00000004uL +#define MSS_GPIO_3_MASK 0x00000008uL +#define MSS_GPIO_4_MASK 0x00000010uL +#define MSS_GPIO_5_MASK 0x00000020uL +#define MSS_GPIO_6_MASK 0x00000040uL +#define MSS_GPIO_7_MASK 0x00000080uL +#define MSS_GPIO_8_MASK 0x00000100uL +#define MSS_GPIO_9_MASK 0x00000200uL +#define MSS_GPIO_10_MASK 0x00000400uL +#define MSS_GPIO_11_MASK 0x00000800uL +#define MSS_GPIO_12_MASK 0x00001000uL +#define MSS_GPIO_13_MASK 0x00002000uL +#define MSS_GPIO_14_MASK 0x00004000uL +#define MSS_GPIO_15_MASK 0x00008000uL +#define MSS_GPIO_16_MASK 0x00010000uL +#define MSS_GPIO_17_MASK 0x00020000uL +#define MSS_GPIO_18_MASK 0x00040000uL +#define MSS_GPIO_19_MASK 0x00080000uL +#define MSS_GPIO_20_MASK 0x00100000uL +#define MSS_GPIO_21_MASK 0x00200000uL +#define MSS_GPIO_22_MASK 0x00400000uL +#define MSS_GPIO_23_MASK 0x00800000uL +#define MSS_GPIO_24_MASK 0x01000000uL +#define MSS_GPIO_25_MASK 0x02000000uL +#define MSS_GPIO_26_MASK 0x04000000uL +#define MSS_GPIO_27_MASK 0x08000000uL +#define MSS_GPIO_28_MASK 0x10000000uL +#define MSS_GPIO_29_MASK 0x20000000uL +#define MSS_GPIO_30_MASK 0x40000000uL +#define MSS_GPIO_31_MASK 0x80000000uL + +/*-------------------------------------------------------------------------*//** + These constant definitions are used as an argument to the MSS_GPIO_config() + function to specify the I/O mode of each GPIO port. + */ +#define MSS_GPIO_INPUT_MODE 0x0000000002uL +#define MSS_GPIO_OUTPUT_MODE 0x0000000005uL +#define MSS_GPIO_INOUT_MODE 0x0000000003uL + +/*-------------------------------------------------------------------------*//** + These constant definitions are used as an argument to the MSS_GPIO_config() + function to specify the interrupt mode of each GPIO port. + */ +#define MSS_GPIO_IRQ_LEVEL_HIGH 0x0000000000uL +#define MSS_GPIO_IRQ_LEVEL_LOW 0x0000000020uL +#define MSS_GPIO_IRQ_EDGE_POSITIVE 0x0000000040uL +#define MSS_GPIO_IRQ_EDGE_NEGATIVE 0x0000000060uL +#define MSS_GPIO_IRQ_EDGE_BOTH 0x0000000080uL + +/*-------------------------------------------------------------------------*//** + The mss_gpio_inout_state_t enumeration is used to specify the output state of + an INOUT GPIO port as an argument to the MSS_GPIO_drive_inout() function. + */ +typedef enum mss_gpio_inout_state +{ + MSS_GPIO_DRIVE_LOW = 0, + MSS_GPIO_DRIVE_HIGH, + MSS_GPIO_HIGH_Z +} mss_gpio_inout_state_t; + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_init() function initializes the SmartFusion2 MSS GPIO block. It + resets the MSS GPIO hardware block and it also clears any pending MSS GPIO + interrupts in the ARM Cortex-M3 interrupt controller. When the function exits, + it takes the MSS GPIO block out of reset. + + @param + This function has no parameters. + + @return + This function does not return a value. + */ +void MSS_GPIO_init( void ); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_config() function is used to configure an individual GPIO port. + + @param port_id + The port_id parameter identifies the GPIO port to be configured. An + enumeration item of the form MSS_GPIO_n, where n is the number of the GPIO + port, is used to identify the GPIO port. For example, MSS_GPIO_0 identifies + the first GPIO port and MSS_GPIO_31 is the last one. + + @param config + The config parameter specifies the configuration to be applied to the GPIO + port identified by the port_id parameter. It is a logical OR of the required + I/O mode and the required interrupt mode. The interrupt mode is not relevant + if the GPIO is configured as an output only. + These I/O mode constants are allowed: + - MSS_GPIO_INPUT_MODE + - MSS_GPIO_OUTPUT_MODE + - MSS_GPIO_INOUT_MODE + These interrupt mode constants are allowed: + - MSS_GPIO_IRQ_LEVEL_HIGH + - MSS_GPIO_IRQ_LEVEL_LOW + - MSS_GPIO_IRQ_EDGE_POSITIVE + - MSS_GPIO_IRQ_EDGE_NEGATIVE + - MSS_GPIO_IRQ_EDGE_BOTH + + @return + none. + + Example: + The following call will configure GPIO 4 as an input generating interrupts on + a Low to High transition of the input: + @code + MSS_GPIO_config( MSS_GPIO_4, MSS_GPIO_INPUT_MODE | MSS_GPIO_IRQ_EDGE_POSITIVE ); + @endcode + */ +void MSS_GPIO_config +( + mss_gpio_id_t port_id, + uint32_t config +); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_set_outputs() function is used to set the state of all GPIO ports + configured as outputs. + + @param value + The value parameter specifies the state of the GPIO ports configured as + outputs. It is a bit mask of the form (MSS_GPIO_n_MASK | MSS_GPIO_m_MASK) + where n and m are numbers identifying GPIOs. For example, (MSS_GPIO_0_MASK | + MSS_GPIO_1_MASK | MSS_GPIO_2_MASK ) specifies that the first, second and + third GPIO outputs must be set High and all other GPIO outputs set Low. The + driver provides 32 mask constants, MSS_GPIO_0_MASK to MSS_GPIO_31_MASK + inclusive, for this purpose. + + @return + none. + + Example 1: + Set GPIOs outputs 0 and 8 high and all other GPIO outputs low. + @code + MSS_GPIO_set_outputs( MSS_GPIO_0_MASK | MSS_GPIO_8_MASK ); + @endcode + + Example 2: + Set GPIOs outputs 2 and 4 low without affecting other GPIO outputs. + @code + uint32_t gpio_outputs; + gpio_outputs = MSS_GPIO_get_outputs(); + gpio_outputs &= ~( MSS_GPIO_2_MASK | MSS_GPIO_4_MASK ); + MSS_GPIO_set_outputs( gpio_outputs ); + @endcode + + @see MSS_GPIO_get_outputs() + */ +static __INLINE void +MSS_GPIO_set_outputs +( + uint32_t value +) +{ + GPIO->GPIO_OUT = value; +} + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_set_output() function is used to set the state of a single GPIO + port configured as an output. + Note: Using bit-band writes might be a better option than this function for + performance critical applications where the application code is not + intended to be ported to a processor other than the ARM Cortex-M3 in + SmartFusion2. The bit-band write equivalent to this function would be: + GPIO_BITBAND->GPIO_OUT[port_id] = (uint32_t)value; + + @param port_id + The port_id parameter identifies the GPIO port that is to have its output + set. An enumeration item of the form MSS_GPIO_n, where n is the number of + the GPIO port, is used to identify the GPIO port. For example, MSS_GPIO_0 + identifies the first GPIO port and MSS_GPIO_31 is the last one. + + @param value + The value parameter specifies the desired state for the GPIO output. A value + of 0 will set the output Low and a value of 1 will set the output High. + + @return + This function does not return a value. + + Example: + The following call will set GPIO output 12 High, leaving all other GPIO + outputs unaffected: + @code + _GPIO_set_output(MSS_GPIO_12, 1); + @endcode + */ +void MSS_GPIO_set_output +( + mss_gpio_id_t port_id, + uint8_t value +); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_get_inputs() function is used to read the current state all GPIO + ports configured as inputs. + + @return + This function returns a 32-bit unsigned integer where each bit represents + the state of a GPIO input. The least significant bit represents the state of + GPIO input 0 and the most significant bit the state of GPIO input 31. + + Example: + Read and assign the current state of the GPIO outputs to a variable. + @code + uint32_t gpio_inputs; + gpio_inputs = MSS_GPIO_get_inputs(); + @endcode + */ +static __INLINE uint32_t +MSS_GPIO_get_inputs( void ) +{ + return GPIO->GPIO_IN; +} + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_get_outputs() function is used to read the current state all GPIO + ports configured as outputs. + + @return + This function returns a 32-bit unsigned integer where each bit represents + the state of a GPIO output. The least significant bit represents the state + of GPIO output 0 and the most significant bit the state of GPIO output 31. + + Example: + Read and assign the current state of the GPIO outputs to a variable. + @code + uint32_t gpio_outputs; + gpio_outputs = MSS_GPIO_get_outputs(); + @endcode + */ +static __INLINE uint32_t +MSS_GPIO_get_outputs( void ) +{ + return GPIO->GPIO_OUT; +} + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_drive_inout() function is used to set the output state of a + single GPIO port configured as an INOUT. An INOUT GPIO can be in one of three + states: + - High + - Low + - High impedance + An INOUT output would typically be used where several devices can drive the + state of a shared signal line. The High and Low states are equivalent to the + High and Low states of a GPIO configured as an output. The High impedance + state is used to prevent the GPIO from driving its output state onto the + signal line, while at the same time allowing the input state of the GPIO to + be read. + + @param port_id + The port_id parameter identifies the GPIO port for which you want to change + the output state. An enumeration item of the form MSS_GPIO_n, where n is the + number of the GPIO port, is used to identify the GPIO port. For example, + MSS_GPIO_0 identifies the first GPIO port and MSS_GPIO_31 is the last one. + + @param inout_state + The inout_state parameter specifies the state of the GPIO port identified by + the port_id parameter. Allowed values of type mss_gpio_inout_state_t are as + follows: + - MSS_GPIO_DRIVE_HIGH + - MSS_GPIO_DRIVE_LOW + - MSS_GPIO_HIGH_Z (High impedance) + + @return + This function does not return a value. + + Example: + The call to MSS_GPIO_drive_inout() below will set the GPIO 7 output to the + high impedance state. + @code + MSS_GPIO_drive_inout( MSS_GPIO_7, MSS_GPIO_HIGH_Z ); + @endcode + */ +void MSS_GPIO_drive_inout +( + mss_gpio_id_t port_id, + mss_gpio_inout_state_t inout_state +); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_enable_irq() function is used to enable interrupt generation for + the specified GPIO input. Interrupts are generated based on the state of the + GPIO input and the interrupt mode configured for it by MSS_GPIO_config(). + + @param port_id + The port_id parameter identifies the GPIO port for which you want to enable + interrupt generation. An enumeration item of the form MSS_GPIO_n, where n is + the number of the GPIO port, is used to identify the GPIO port. For example, + MSS_GPIO_0 identifies the first GPIO port and MSS_GPIO_31 is the last one. + + @return + This function does not return a value. + + Example: + The call to MSS_GPIO_enable_irq() below will allow GPIO 8 to generate + interrupts. + @code + MSS_GPIO_enable_irq( MSS_GPIO_8 ); + @endcode + */ +void MSS_GPIO_enable_irq +( + mss_gpio_id_t port_id +); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_disable_irq() function is used to disable interrupt generation + for the specified GPIO input. + + @param port_id + The port_id parameter identifies the GPIO port for which you want to disable + interrupt generation. An enumeration item of the form MSS_GPIO_n, where n is + the number of the GPIO port, is used to identify the GPIO port. For example, + MSS_GPIO_0 identifies the first GPIO port and MSS_GPIO_31 is the last one. + + @return + This function does not return a value. + + Example: + The call to MSS_GPIO_disable_irq() below will prevent GPIO 8 from generating + interrupts. + @code + MSS_GPIO_disable_irq( MSS_GPIO_8 ); + @endcode + */ +void MSS_GPIO_disable_irq +( + mss_gpio_id_t port_id +); + +/*-------------------------------------------------------------------------*//** + The MSS_GPIO_clear_irq() function is used to clear a pending interrupt from + the specified GPIO input. + Note: The MSS_GPIO_clear_irq() function must be called as part of any GPIO + interrupt service routine (ISR) in order to prevent the same interrupt + event retriggering a call to the GPIO ISR. + + @param port_id + The port_id parameter identifies the GPIO port for which you want to clear + the interrupt. An enumeration item of the form MSS_GPIO_n, where n is the + number of the GPIO port, is used to identify the GPIO port. For example, + MSS_GPIO_0 identifies the first GPIO port and MSS_GPIO_31 is the last one. + + @return + none. + + Example: + The example below demonstrates the use of the MSS_GPIO_clear_irq() function + as part of the GPIO 9 interrupt service routine. + @code + void GPIO9_IRQHandler( void ) + { + do_interrupt_processing(); + + MSS_GPIO_clear_irq( MSS_GPIO_9 ); + } + @endcode + */ +void MSS_GPIO_clear_irq +( + mss_gpio_id_t port_id +); + +#ifdef __cplusplus +} +#endif + +#endif /* MSS_GPIO_H_ */ diff --git a/bsp/smartfusion2/libraries/mss_uart/mss_uart.c b/bsp/smartfusion2/libraries/mss_uart/mss_uart.c new file mode 100644 index 0000000000000000000000000000000000000000..2d04985fbc09288885654f5e629c4e4ce56ff163 --- /dev/null +++ b/bsp/smartfusion2/libraries/mss_uart/mss_uart.c @@ -0,0 +1,1762 @@ +/******************************************************************************* + * (c) Copyright 2011-2013 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 Microcontroller Subsystem MMUART bare metal software driver + * implementation. + * + * SVN $Revision: 5610 $ + * SVN $Date: 2013-04-05 18:49:30 +0530 (Fri, 05 Apr 2013) $ + */ +#include "mss_uart.h" +#include "mss_uart_regs.h" +#include "../../CMSIS/mss_assert.h" +#include "../../CMSIS/hw_reg_io.h" +#include "../../CMSIS/system_m2sxxx.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/******************************************************************************* + * Defines + */ +#define TX_COMPLETE 0u +#define TX_FIFO_SIZE 16u + +#define FCR_TRIG_LEVEL_MASK 0xC0u + +#define IIRF_MASK 0x0Fu + +#define INVALID_INTERRUPT 0u +#define INVALID_IRQ_HANDLER ((mss_uart_irq_handler_t) 0) +#define NULL_HANDLER ((mss_uart_irq_handler_t) 0) + +#define MSS_UART_DATA_READY ((uint8_t) 0x01) + +#define SYNC_ASYNC_MODE_MASK (0x7u) + +/******************************************************************************* + * Possible values for Interrupt Identification Register Field. + */ +#define IIRF_MODEM_STATUS 0x00u +#define IIRF_THRE 0x02u +#define IIRF_MMI 0x03u +#define IIRF_RX_DATA 0x04u +#define IIRF_RX_LINE_STATUS 0x06u +#define IIRF_DATA_TIMEOUT 0x0Cu + +/******************************************************************************* + * Receiver error status mask. + */ +#define STATUS_ERROR_MASK ( MSS_UART_OVERUN_ERROR | MSS_UART_PARITY_ERROR | \ + MSS_UART_FRAMING_ERROR | MSS_UART_BREAK_ERROR | \ + MSS_UART_FIFO_ERROR) + +/******************************************************************************* + * Cortex-M3 interrupt handler functions implemented as part of the MSS UART + * driver. + */ +#if defined(__GNUC__) +__attribute__((__interrupt__)) void UART0_IRQHandler(void); +#else +void UART0_IRQHandler(void); +#endif + +#if defined(__GNUC__) +__attribute__((__interrupt__)) void UART1_IRQHandler(void); +#else +void UART1_IRQHandler(void); +#endif + +/******************************************************************************* + * Local functions. + */ +static void global_init(mss_uart_instance_t * this_uart, uint32_t baud_rate, + uint8_t line_config); +static void MSS_UART_isr(mss_uart_instance_t * this_uart); +static void default_tx_handler(mss_uart_instance_t * this_uart); + +static void config_baud_divisors +( + mss_uart_instance_t * this_uart, + uint32_t baudrate +); + +/******************************************************************************* + * Instance definitions + */ +mss_uart_instance_t g_mss_uart0; +mss_uart_instance_t g_mss_uart1; + + +/******************************************************************************* + * Public Functions + *******************************************************************************/ +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +) +{ + /* The driver expects g_mss_uart0 and g_mss_uart1 to be the only + * mss_uart_instance_t instances used to identify UART0 and UART1. */ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + /* Perform generic initialization */ + global_init(this_uart, baud_rate, line_config); + + /* Disable LIN mode */ + clear_bit_reg8(&this_uart->hw_reg->MM0, ELIN); + + /* Disable IrDA mode */ + clear_bit_reg8(&this_uart->hw_reg->MM1, EIRD); + + /* Disable SmartCard Mode */ + clear_bit_reg8(&this_uart->hw_reg->MM2, EERR); + + /* set default tx handler for automated TX using interrupt in USART mode */ + this_uart->tx_handler = default_tx_handler; +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void MSS_UART_lin_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +) +{ + /* The driver expects g_mss_uart0 and g_mss_uart1 to be the only + * mss_uart_instance_t instances used to identify UART0 and UART1. */ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + /* Perform generic initialization */ + global_init(this_uart, baud_rate, line_config); + + /* Enable LIN mode */ + set_bit_reg8(&this_uart->hw_reg->MM0, ELIN); + + /* Disable IrDA mode */ + clear_bit_reg8(&this_uart->hw_reg->MM1, EIRD); + + /* Disable SmartCard Mode */ + clear_bit_reg8(&this_uart->hw_reg->MM2, EERR); +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_irda_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config, + mss_uart_rzi_polarity_t rxpol, + mss_uart_rzi_polarity_t txpol, + mss_uart_rzi_pulsewidth_t pw +) +{ + /* The driver expects g_mss_uart0 and g_mss_uart1 to be the only + * mss_uart_instance_t instances used to identify UART0 and UART1. */ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + /* Perform generic initialization */ + global_init(this_uart, baud_rate, line_config); + + /* Enable LIN mode */ + clear_bit_reg8(&this_uart->hw_reg->MM0, ELIN); + + /* Disable IrDA mode */ + set_bit_reg8(&this_uart->hw_reg->MM1, EIRD); + ((rxpol == MSS_UART_ACTIVE_LOW) ? clear_bit_reg8(&this_uart->hw_reg->MM1,EIRX) : + set_bit_reg8(&this_uart->hw_reg->MM1,EIRX)); + + ((txpol == MSS_UART_ACTIVE_LOW) ? clear_bit_reg8(&this_uart->hw_reg->MM1,EITX) : + set_bit_reg8(&this_uart->hw_reg->MM1,EITX)); + + ((pw == MSS_UART_3_BY_16) ? clear_bit_reg8(&this_uart->hw_reg->MM1,EITP) : + set_bit_reg8(&this_uart->hw_reg->MM1,EITP)); + /* Disable SmartCard Mode */ + clear_bit_reg8(&this_uart->hw_reg->MM2, EERR); +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_smartcard_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +) +{ + /* The driver expects g_mss_uart0 and g_mss_uart1 to be the only + * mss_uart_instance_t instances used to identify UART0 and UART1. */ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + /* Perform generic initialization */ + global_init(this_uart, baud_rate, line_config); + + /* Disable LIN mode */ + clear_bit_reg8(&this_uart->hw_reg->MM0, ELIN); + + /* Disable IrDA mode */ + clear_bit_reg8(&this_uart->hw_reg->MM1, EIRD); + + /* Enable SmartCard Mode : Only when data is 8-bit and 2 stop bits*/ + if( ( MSS_UART_DATA_8_BITS | MSS_UART_TWO_STOP_BITS) == + (line_config & (MSS_UART_DATA_8_BITS | MSS_UART_TWO_STOP_BITS))) + { + set_bit_reg8(&this_uart->hw_reg->MM2, EERR); + /* Enable single wire half-duplex mode */ + set_bit_reg8(&this_uart->hw_reg->MM2,ESWM); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_polled_tx +( + mss_uart_instance_t * this_uart, + const uint8_t * pbuff, + uint32_t tx_size +) +{ + uint32_t char_idx = 0u; + uint32_t size_sent; + uint8_t status; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(pbuff != ( (uint8_t *)0)); + ASSERT(tx_size > 0u); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (pbuff != ((uint8_t *)0)) && (tx_size > 0u)) + { + /* Remain in this loop until the entire input buffer + * has been transferred to the UART. + */ + do { + /* Read the Line Status Register and update the sticky record */ + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + + /* Check if TX FIFO is empty. */ + if(status & MSS_UART_THRE) + { + uint32_t fill_size = TX_FIFO_SIZE; + + /* Calculate the number of bytes to transmit. */ + if(tx_size < TX_FIFO_SIZE) + { + fill_size = tx_size; + } + + /* Fill the TX FIFO with the calculated the number of bytes. */ + for(size_sent = 0u; size_sent < fill_size; ++size_sent) + { + /* Send next character in the buffer. */ + this_uart->hw_reg->THR = pbuff[char_idx]; + char_idx++; + } + + /* Calculate the number of untransmitted bytes remaining. */ + tx_size -= size_sent; + } + } while(tx_size); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_polled_tx_string +( + mss_uart_instance_t * this_uart, + const uint8_t * p_sz_string +) +{ + uint32_t char_idx = 0u; + uint32_t fill_size; + uint8_t data_byte; + uint8_t status; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(p_sz_string != ((uint8_t *)0)); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (p_sz_string != ((uint8_t *)0))) + { + /* Get the first data byte from the input buffer */ + data_byte = p_sz_string[char_idx]; + + /* First check for the NULL terminator byte. + * Then remain in this loop until the entire string in the input buffer + * has been transferred to the UART. + */ + while(0u != data_byte) + { + /* Wait until TX FIFO is empty. */ + do { + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + } while (0u == (status & MSS_UART_THRE)); + + /* Send bytes from the input buffer until the TX FIFO is full + * or we reach the NULL terminator byte. + */ + fill_size = 0u; + while((0u != data_byte) && (fill_size < TX_FIFO_SIZE)) + { + /* Send the data byte */ + this_uart->hw_reg->THR = data_byte; + ++fill_size; + char_idx++; + /* Get the next data byte from the input buffer */ + data_byte = p_sz_string[char_idx]; + } + } + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_irq_tx +( + mss_uart_instance_t * this_uart, + const uint8_t * pbuff, + uint32_t tx_size +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(pbuff != ((uint8_t *)0)); + ASSERT(tx_size > 0u); + + if((tx_size > 0u) && ( pbuff != ((uint8_t *)0)) && + ((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1))) + { + /*Initialise the transmit info for the UART instance with the arguments.*/ + this_uart->tx_buffer = pbuff; + this_uart->tx_buff_size = tx_size; + this_uart->tx_idx = (uint16_t)0; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* assign default handler for data transfer */ + this_uart->tx_handler = default_tx_handler; + + /* enables TX interrupt */ + set_bit_reg8(&this_uart->hw_reg->IER,ETBEI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +int8_t +MSS_UART_tx_complete +( + mss_uart_instance_t * this_uart +) +{ + int8_t ret_value = 0; + uint8_t status = 0u; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Read the Line Status Register and update the sticky record. */ + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + + if((TX_COMPLETE == this_uart->tx_buff_size) && + ((status & MSS_UART_TEMT) != 0u)) + { + ret_value = (int8_t)1; + } + } + return ret_value; +} + + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +size_t +MSS_UART_get_rx +( + mss_uart_instance_t * this_uart, + uint8_t * rx_buff, + size_t buff_size +) +{ + size_t rx_size = 0u; + uint8_t status = 0u; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(rx_buff != ((uint8_t *)0)); + ASSERT(buff_size > 0u); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (rx_buff != ((uint8_t *)0)) && (buff_size > 0u)) + { + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + + while(((status & MSS_UART_DATA_READY) != 0u) && + (rx_size < buff_size)) + { + rx_buff[rx_size] = this_uart->hw_reg->RBR; + ++rx_size; + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + } + } + return rx_size; +} +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_irq +( + mss_uart_instance_t * this_uart, + mss_uart_irq_t irq_mask +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_IRQ > irq_mask); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_IRQ > irq_mask)) + { + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* irq_mask encoding: 1- enable + * bit 0 - Receive Data Available Interrupt + * bit 1 - Transmitter Holding Register Empty Interrupt + * bit 2 - Receiver Line Status Interrupt + * bit 3 - Modem Status Interrupt + */ + this_uart->hw_reg->IER |= (uint8_t)irq_mask & IIRF_MASK; + + /* + * bit 4 - Receiver time-out interrupt + * bit 5 - NACK / ERR signal interrupt + * bit 6 - PID parity error interrupt + * bit 7 - LIN break detection interrupt + * bit 8 - LIN Sync detection interrupt + */ + this_uart->hw_reg->IEM |= (uint8_t)(((uint32_t)irq_mask & ~((uint32_t)IIRF_MASK)) >> 4u); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_irq +( + mss_uart_instance_t * this_uart, + mss_uart_irq_t irq_mask +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* irq_mask encoding: 1 - disable + * bit 0 - Receive Data Available Interrupt + * bit 1 - Transmitter Holding Register Empty Interrupt + * bit 2 - Receiver Line Status Interrupt + * bit 3 - Modem Status Interrupt + */ + this_uart->hw_reg->IER &= ((uint8_t)(~((uint32_t)irq_mask & (uint32_t)IIRF_MASK))); + + /* + * bit 4 - Receiver time-out interrupt + * bit 5 - NACK / ERR signal interrupt + * bit 6 - PID parity error interrupt + * bit 7 - LIN break detection interrupt + * bit 8 - LIN Sync detection interrupt + */ + this_uart->hw_reg->IEM |= (uint8_t)(~(((uint32_t)irq_mask & ~((uint32_t)IIRF_MASK)) >> 8u)); + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + if(irq_mask == IIRF_MASK) + { + /* Disable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_DisableIRQ(this_uart->irqn); + + } + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_rx_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler, + mss_uart_rx_trig_level_t trigger_level +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER ); + ASSERT(trigger_level < MSS_UART_FIFO_INVALID_TRIG_LEVEL); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER) && + (trigger_level < MSS_UART_FIFO_INVALID_TRIG_LEVEL)) + { + this_uart->rx_handler = handler; + + /* Set the receive interrupt trigger level. */ + this_uart->hw_reg->FCR = (this_uart->hw_reg->FCR & + (uint8_t)(~((uint8_t)FCR_TRIG_LEVEL_MASK))) | + (uint8_t)trigger_level; + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* Enable receive interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IER,ERBFI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_loopback +( + mss_uart_instance_t * this_uart, + mss_uart_loopback_t loopback +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_LOOPBACK > loopback); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) || + (MSS_UART_INVALID_LOOPBACK > loopback)) + { + switch(loopback) + { + case MSS_UART_LOCAL_LOOPBACK_OFF: + /* Disable local loopback */ + clear_bit_reg8(&this_uart->hw_reg->MCR,LOOP); + break; + + case MSS_UART_LOCAL_LOOPBACK_ON: + /* Enable local loopback */ + set_bit_reg8(&this_uart->hw_reg->MCR,LOOP); + break; + + case MSS_UART_REMOTE_LOOPBACK_OFF: + case MSS_UART_AUTO_ECHO_OFF: + /* Disable remote loopback & automatic echo*/ + this_uart->hw_reg->MCR &= ~RLOOP_MASK; + break; + + case MSS_UART_REMOTE_LOOPBACK_ON: + /* Enable remote loopback */ + this_uart->hw_reg->MCR |= (1u << RLOOP); + break; + + case MSS_UART_AUTO_ECHO_ON: + /* Enable automatic echo */ + this_uart->hw_reg->MCR |= (1u << ECHO); + break; + + case MSS_UART_INVALID_LOOPBACK: + /* Fall through to default. */ + default: + ASSERT(0); + break; + } + } +} + +/***************************************************************************//** + * UART0 interrupt service routine. + * UART0_IRQHandler is included within the Cortex-M3 vector table as part of the + * Fusion 2 CMSIS. + */ +#if defined(__GNUC__) +__attribute__((__interrupt__)) void UART0_IRQHandler(void) +#else +void UART0_IRQHandler(void) +#endif +{ + MSS_UART_isr(&g_mss_uart0); +} + +/***************************************************************************//** + * UART1 interrupt service routine. + * UART2_IRQHandler is included within the Cortex-M3 vector table as part of the + * Fusion 2 CMSIS. + */ +#if defined(__GNUC__) +__attribute__((__interrupt__)) void UART1_IRQHandler(void) +#else +void UART1_IRQHandler(void) +#endif +{ + MSS_UART_isr(&g_mss_uart1); +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_rxstatus_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->linests_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* Enable receiver line status interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IER,ELSI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_tx_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->tx_handler = handler; + + /* Make TX buffer info invalid */ + this_uart->tx_buffer = (const uint8_t *)0; + this_uart->tx_buff_size = 0u; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* Enable transmitter holding register Empty interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IER,ETBEI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_modemstatus_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->modemsts_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ(this_uart->irqn); + + /* Enable modem status interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IER,EDSSI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +size_t +MSS_UART_fill_tx_fifo +( + mss_uart_instance_t * this_uart, + const uint8_t * tx_buffer, + size_t tx_size +) +{ + uint8_t status = 0u; + size_t size_sent = 0u; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(tx_buffer != ( (uint8_t *)0)); + ASSERT(tx_size > 0); + + /* Fill the UART's Tx FIFO until the FIFO is full or the complete input + * buffer has been written. */ + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (tx_buffer != ((uint8_t *)0)) && + (tx_size > 0u)) + { + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + + if(status & MSS_UART_THRE) + { + uint32_t fill_size = TX_FIFO_SIZE; + + if(tx_size < TX_FIFO_SIZE) + { + fill_size = tx_size; + } + /* Fill up FIFO */ + for(size_sent = 0u; size_sent < fill_size; ++size_sent) + { + + /* Send next character in the buffer. */ + this_uart->hw_reg->THR = tx_buffer[size_sent]; + } + } + } + return size_sent; +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +uint8_t +MSS_UART_get_rx_status +( + mss_uart_instance_t * this_uart +) +{ + uint8_t status = MSS_UART_INVALID_PARAM; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* + * Extract UART receive error status. + * Bit 1 - Overflow error status + * Bit 2 - Parity error status + * Bit 3 - Frame error status + * Bit 4 - Break interrupt indicator + * Bit 7 - FIFO data error status + */ + this_uart->status |= (this_uart->hw_reg->LSR); + status = (this_uart->status & STATUS_ERROR_MASK); + /* Clear the sticky status after reading */ + this_uart->status = 0u; + } + return status; +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +uint8_t +MSS_UART_get_modem_status +( + mss_uart_instance_t * this_uart +) +{ + uint8_t status = MSS_UART_INVALID_PARAM; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* + * Extract UART modem status and place in lower bits of "status". + * Bit 0 - Delta Clear to Send Indicator + * Bit 1 - Delta Clear to Receive Indicator + * Bit 2 - Trailing edge of Ring Indicator detector + * Bit 3 - Delta Data Carrier Detect indicator + * Bit 4 - Clear To Send + * Bit 5 - Data Set Ready + * Bit 6 - Ring Indicator + * Bit 7 - Data Carrier Detect + */ + status = this_uart->hw_reg->MSR; + } + return status; +} + +/***************************************************************************//** + * MSS_UART_get_tx_status. + * See mss_uart.h for details of how to use this function. + */ +uint8_t +MSS_UART_get_tx_status +( + mss_uart_instance_t * this_uart +) +{ + uint8_t status = MSS_UART_TX_BUSY; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Read the Line Status Register and update the sticky record. */ + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + /* + * Extract the transmit status bits from the UART's Line Status Register. + * Bit 5 - Transmitter Holding Register/FIFO Empty (THRE) status. (If = 1, TX FIFO is empty) + * Bit 6 - Transmitter Empty (TEMT) status. (If = 1, both TX FIFO and shift register are empty) + */ + status &= (MSS_UART_THRE | MSS_UART_TEMT); + } + return status; +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_break +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* set break charecter on Tx line */ + set_bit_reg8(&this_uart->hw_reg->LCR,SB); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_clear_break +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* remove break charecter from Tx line */ + clear_bit_reg8(&this_uart->hw_reg->LCR,SB); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_pidpei_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->pid_pei_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ( this_uart->irqn ); + + /* Enable PID parity error interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IEM,EPID_PEI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_linbreak_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->break_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ( this_uart->irqn ); + + /* Enable LIN break detection interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IEM,ELINBI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_linsync_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->sync_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ( this_uart->irqn ); + + /* Enable LIN sync detection interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IEM,ELINSI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_nack_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->nack_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ( this_uart->irqn ); + + /* Enable LIN sync detection interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IEM,ENACKI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_rx_timeout_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(handler != INVALID_IRQ_HANDLER); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (handler != INVALID_IRQ_HANDLER)) + { + this_uart->rto_handler = handler; + + /* Clear any previously pended interrupts */ + NVIC_ClearPendingIRQ( this_uart->irqn ); + + /* Enable receiver timeout interrupt. */ + set_bit_reg8(&this_uart->hw_reg->IEM,ERTOI); + + /* Enable UART instance interrupt in Cortex-M3 NVIC. */ + NVIC_EnableIRQ(this_uart->irqn); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_half_duplex +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* enable single wire half-duplex mode */ + set_bit_reg8(&this_uart->hw_reg->MM2,ESWM); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_half_duplex +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* enable single wire half-duplex mode */ + clear_bit_reg8(&this_uart->hw_reg->MM2,ESWM); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_rx_endian +( + mss_uart_instance_t * this_uart, + mss_uart_endian_t endian +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_ENDIAN > endian); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_ENDIAN > endian)) + { + /* Configure MSB first / LSB first for receiver */ + ((MSS_UART_LITTLEEND == endian) ? (clear_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_RX)) : + (set_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_RX))); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_tx_endian +( + mss_uart_instance_t * this_uart, + mss_uart_endian_t endian +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_ENDIAN > endian); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_ENDIAN > endian)) + { + /* Configure MSB first / LSB first for transmitter */ + ((MSS_UART_LITTLEEND == endian) ? (clear_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_TX)) : + (set_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_TX)) ) ; + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_filter_length +( + mss_uart_instance_t * this_uart, + mss_uart_filter_length_t length +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_FILTER_LENGTH > length); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_FILTER_LENGTH > length)) + { + /* Configure glitch filter length */ + this_uart->hw_reg->GFR = (uint8_t)length; + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_afm +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Disable RX FIFO till address flag with correct address is received */ + set_bit_reg8(&this_uart->hw_reg->MM2,EAFM); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_afm +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Enable RX FIFO irrespective of address flag and + correct address is received */ + clear_bit_reg8(&this_uart->hw_reg->MM2,EAFM); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_afclear +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Enable address flag clearing */ + /* Disable RX FIFO till another address flag with + correct address is received */ + set_bit_reg8(&this_uart->hw_reg->MM2,EAFC); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_afclear +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Disable address flag clearing */ + clear_bit_reg8(&this_uart->hw_reg->MM2,EAFC); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_rx_timeout +( + mss_uart_instance_t * this_uart, + uint8_t timeout +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Load the receive timeout value */ + this_uart->hw_reg->RTO = timeout; + /*Enable receiver time-out */ + set_bit_reg8(&this_uart->hw_reg->MM0,ERTO); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_rx_timeout +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /*Disable receiver time-out */ + clear_bit_reg8(&this_uart->hw_reg->MM0,ERTO); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_enable_tx_time_guard +( + mss_uart_instance_t * this_uart, + uint8_t timeguard +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /* Load the transmitter time guard value */ + this_uart->hw_reg->TTG = timeguard; + /*Enable transmitter time guard */ + set_bit_reg8(&this_uart->hw_reg->MM0,ETTG); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_disable_tx_time_guard +( + mss_uart_instance_t * this_uart +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + /*Disable transmitter time guard */ + clear_bit_reg8(&this_uart->hw_reg->MM0,ETTG); + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_address +( + mss_uart_instance_t * this_uart, + uint8_t address +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + this_uart->hw_reg->ADR = address; + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_ready_mode +( + mss_uart_instance_t * this_uart, + mss_uart_ready_mode_t mode +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_READY_MODE > mode); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_READY_MODE > mode ) ) + { + /* Configure mode 0 or mode 1 for TXRDY and RXRDY */ + ((MSS_UART_READY_MODE0 == mode) ? clear_bit_reg8(&this_uart->hw_reg->FCR,RDYMODE) : + set_bit_reg8(&this_uart->hw_reg->FCR,RDYMODE) ); + } +} + +/***************************************************************************//** + * Configure baud divisors using fractional baud rate if possible. + */ +static void +config_baud_divisors +( + mss_uart_instance_t * this_uart, + uint32_t baudrate +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + uint32_t baud_value; + uint32_t baud_value_by_64; + uint32_t baud_value_by_128; + uint32_t fractional_baud_value; + uint32_t pclk_freq; + + this_uart->baudrate = baudrate; + + /* Force the value of the CMSIS global variables holding the various system + * clock frequencies to be updated. */ + SystemCoreClockUpdate(); + if(this_uart == &g_mss_uart0) + { + pclk_freq = g_FrequencyPCLK0; + } + else + { + pclk_freq = g_FrequencyPCLK1; + } + + /* + * Compute baud value based on requested baud rate and PCLK frequency. + * The baud value is computed using the following equation: + * baud_value = PCLK_Frequency / (baud_rate * 16) + */ + baud_value_by_128 = (8u * pclk_freq) / baudrate; + baud_value_by_64 = baud_value_by_128 / 2u; + baud_value = baud_value_by_64 / 64u; + fractional_baud_value = baud_value_by_64 - (baud_value * 64u); + fractional_baud_value += (baud_value_by_128 - (baud_value * 128u)) - (fractional_baud_value * 2u); + + /* Assert if integer baud value fits in 16-bit. */ + ASSERT(baud_value <= UINT16_MAX); + + if(baud_value <= (uint32_t)UINT16_MAX) + { + if(baud_value > 1u) + { + /* + * Use Frational baud rate divisors + */ + /* set divisor latch */ + set_bit_reg8(&this_uart->hw_reg->LCR,DLAB); + + /* msb of baud value */ + this_uart->hw_reg->DMR = (uint8_t)(baud_value >> 8); + /* lsb of baud value */ + this_uart->hw_reg->DLR = (uint8_t)baud_value; + + /* reset divisor latch */ + clear_bit_reg8(&this_uart->hw_reg->LCR,DLAB); + + /* Enable Fractional baud rate */ + set_bit_reg8(&this_uart->hw_reg->MM0,EFBR); + + /* Load the fractional baud rate register */ + ASSERT(fractional_baud_value <= (uint32_t)UINT8_MAX); + this_uart->hw_reg->DFR = (uint8_t)fractional_baud_value; + } + else + { + /* + * Do NOT use Frational baud rate divisors. + */ + /* set divisor latch */ + set_bit_reg8(&this_uart->hw_reg->LCR,DLAB); + + /* msb of baud value */ + this_uart->hw_reg->DMR = (uint8_t)(baud_value >> 8u); + /* lsb of baud value */ + this_uart->hw_reg->DLR = (uint8_t)baud_value; + + /* reset divisor latch */ + clear_bit_reg8(&this_uart->hw_reg->LCR,DLAB); + + /* Disable Fractional baud rate */ + clear_bit_reg8(&this_uart->hw_reg->MM0,EFBR); + } + } + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +void +MSS_UART_set_usart_mode +( + mss_uart_instance_t * this_uart, + mss_uart_usart_mode_t mode +) +{ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(MSS_UART_INVALID_SYNC_MODE > mode); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (MSS_UART_INVALID_SYNC_MODE > mode)) + { + /* Nothing to do for the baudrate: operates at PCLK / 2 + glitch filter length */ + /* Clear the ESYN bits 2:0 */ + this_uart->hw_reg->MM0 &= ~SYNC_ASYNC_MODE_MASK; + this_uart->hw_reg->MM0 |= (uint8_t)mode; + } +} + +/******************************************************************************* + * Local Functions + *******************************************************************************/ +/******************************************************************************* + * Global initialization for all modes + */ +static void global_init +( + mss_uart_instance_t * this_uart, + uint32_t baud_rate, + uint8_t line_config +) +{ + /* The driver expects g_mss_uart0 and g_mss_uart1 to be the only + * mss_uart_instance_t instances used to identify UART0 and UART1. */ + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if(this_uart == &g_mss_uart0) + { + this_uart->hw_reg = UART0; + this_uart->irqn = UART0_IRQn; + /* reset UART0 */ + SYSREG->SOFT_RST_CR |= SYSREG_MMUART0_SOFTRESET_MASK; + /* Clear any previously pended UART0 interrupt */ + NVIC_ClearPendingIRQ(UART0_IRQn); + /* Take UART0 out of reset. */ + SYSREG->SOFT_RST_CR &= ~SYSREG_MMUART0_SOFTRESET_MASK; + } + else + { + this_uart->hw_reg = UART1; + this_uart->irqn = UART1_IRQn; + /* Reset UART1 */ + SYSREG->SOFT_RST_CR |= SYSREG_MMUART1_SOFTRESET_MASK; + /* Clear any previously pended UART1 interrupt */ + NVIC_ClearPendingIRQ(UART1_IRQn); + /* Take UART1 out of reset. */ + SYSREG->SOFT_RST_CR &= ~SYSREG_MMUART1_SOFTRESET_MASK; + } + + /* disable interrupts */ + this_uart->hw_reg->IER = 0u; + + /* FIFO configuration */ + this_uart->hw_reg->FCR = (uint8_t)MSS_UART_FIFO_SINGLE_BYTE; + /* clear receiver FIFO */ + set_bit_reg8(&this_uart->hw_reg->FCR,CLEAR_RX_FIFO); + /* clear transmitter FIFO */ + set_bit_reg8(&this_uart->hw_reg->FCR,CLEAR_TX_FIFO); + + /* set default READY mode : Mode 0*/ + /* enable RXRDYN and TXRDYN pins. The earlier FCR write to set the TX FIFO + * trigger level inadvertently disabled the FCR_RXRDY_TXRDYN_EN bit. */ + set_bit_reg8(&this_uart->hw_reg->FCR,RXRDY_TXRDYN_EN); + + /* disable loopback : local * remote */ + clear_bit_reg8(&this_uart->hw_reg->MCR,LOOP); + clear_bit_reg8(&this_uart->hw_reg->MCR,RLOOP); + + /* set default TX endian */ + clear_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_TX); + /* set default RX endian */ + clear_bit_reg8(&this_uart->hw_reg->MM1,E_MSB_RX); + + /* default AFM : disabled */ + clear_bit_reg8(&this_uart->hw_reg->MM2,EAFM); + + /* disable TX time gaurd */ + clear_bit_reg8(&this_uart->hw_reg->MM0,ETTG); + + /* set default RX timeout */ + clear_bit_reg8(&this_uart->hw_reg->MM0,ERTO); + + /* disable fractional baud-rate */ + clear_bit_reg8(&this_uart->hw_reg->MM0,EFBR); + + /* disable single wire mode */ + clear_bit_reg8(&this_uart->hw_reg->MM2,ESWM); + + /* set filter to minimum value */ + this_uart->hw_reg->GFR = 0u; + /* set default TX time gaurd */ + this_uart->hw_reg->TTG = 0u; + /* set default RX timeout */ + this_uart->hw_reg->RTO = 0u; + + /* + * Configure baud rate divisors. This uses the frational baud rate divisor + * where possible to provide the most accurate baud rat possible. + */ + config_baud_divisors(this_uart, baud_rate); + + /* set the line control register (bit length, stop bits, parity) */ + this_uart->hw_reg->LCR = line_config; + + /* Instance setup */ + this_uart->baudrate = baud_rate; + this_uart->lineconfig = line_config; + this_uart->tx_buff_size = TX_COMPLETE; + this_uart->tx_buffer = (const uint8_t *)0; + this_uart->tx_idx = 0u; + + /* Default handlers for MSS UART interrupts */ + this_uart->rx_handler = NULL_HANDLER; + this_uart->tx_handler = NULL_HANDLER; + this_uart->linests_handler = NULL_HANDLER; + this_uart->modemsts_handler = NULL_HANDLER; + this_uart->rto_handler = NULL_HANDLER; + this_uart->nack_handler = NULL_HANDLER; + this_uart->pid_pei_handler = NULL_HANDLER; + this_uart->break_handler = NULL_HANDLER; + this_uart->sync_handler = NULL_HANDLER; + + /* Initialize the sticky status */ + this_uart->status = 0u; +} + +/***************************************************************************//** + * Interrupt service routine triggered by any MSS UART interrupt. This routine + * will call the handler function appropriate to the interrupt from the + * handlers previously registered with the driver through calls to the + * MSS_UART_set_*_handler() functions, or it will call the default_tx_handler() + * function in response to transmit interrupts if MSS_UART_irq_tx() is used to + * transmit data. + */ +static void +MSS_UART_isr +( + mss_uart_instance_t * this_uart +) +{ + uint8_t iirf; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + + if((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) + { + iirf = this_uart->hw_reg->IIR & IIRF_MASK; + + switch (iirf) + { + case IIRF_MODEM_STATUS: /* Modem status interrupt */ + { + ASSERT(NULL_HANDLER != this_uart->modemsts_handler); + if(NULL_HANDLER != this_uart->modemsts_handler) + { + (*(this_uart->modemsts_handler))(this_uart); + } + } + break; + + case IIRF_THRE: /* Transmitter Holding Register Empty */ + { + ASSERT(NULL_HANDLER != this_uart->tx_handler); + if(NULL_HANDLER != this_uart->tx_handler) + { + (*(this_uart->tx_handler))(this_uart); + } + } + break; + + case IIRF_RX_DATA: /* Received Data Available */ + case IIRF_DATA_TIMEOUT: /* Received Data Timed-out */ + { + ASSERT(NULL_HANDLER != this_uart->rx_handler); + if(NULL_HANDLER != this_uart->rx_handler) + { + (*(this_uart->rx_handler))(this_uart); + } + } + break; + + case IIRF_RX_LINE_STATUS: /* Line Status Interrupt */ + { + ASSERT(NULL_HANDLER != this_uart->linests_handler); + if(NULL_HANDLER != this_uart->linests_handler) + { + (*(this_uart->linests_handler))(this_uart); + } + } + break; + + case IIRF_MMI: + { + /* Identify multimode interrupts and handle */ + + /* Receiver time-out interrupt */ + if(read_bit_reg8(&this_uart->hw_reg->IIM,ERTOI)) + { + ASSERT(NULL_HANDLER != this_uart->rto_handler); + if(NULL_HANDLER != this_uart->rto_handler) + { + (*(this_uart->rto_handler))(this_uart); + } + } + /* NACK interrupt */ + if(read_bit_reg8(&this_uart->hw_reg->IIM,ENACKI)) + { + ASSERT(NULL_HANDLER != this_uart->nack_handler); + if(NULL_HANDLER != this_uart->nack_handler) + { + (*(this_uart->nack_handler))(this_uart); + } + } + + /* PID parity error interrupt */ + if(read_bit_reg8(&this_uart->hw_reg->IIM,EPID_PEI)) + { + ASSERT(NULL_HANDLER != this_uart->pid_pei_handler); + if(NULL_HANDLER != this_uart->pid_pei_handler) + { + (*(this_uart->pid_pei_handler))(this_uart); + } + } + + /* LIN break detection interrupt */ + if(read_bit_reg8(&this_uart->hw_reg->IIM,ELINBI)) + { + ASSERT(NULL_HANDLER != this_uart->break_handler); + if(NULL_HANDLER != this_uart->break_handler) + { + (*(this_uart->break_handler))(this_uart); + } + } + + /* LIN Sync detection interrupt */ + if(read_bit_reg8(&this_uart->hw_reg->IIM,ELINSI)) + { + ASSERT(NULL_HANDLER != this_uart->sync_handler); + if(NULL_HANDLER != this_uart->sync_handler) + { + (*(this_uart->sync_handler))(this_uart); + } + } + break; + } + + default: + { + ASSERT(INVALID_INTERRUPT); + } + break; + } + } +} + +/***************************************************************************//** + * See mss_uart.h for details of how to use this function. + */ +static void +default_tx_handler +( + mss_uart_instance_t * this_uart +) +{ + uint8_t status; + + ASSERT((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)); + ASSERT(( (uint8_t *)0 ) != this_uart->tx_buffer); + ASSERT(0u < this_uart->tx_buff_size); + + if(((this_uart == &g_mss_uart0) || (this_uart == &g_mss_uart1)) && + (((uint8_t *)0 ) != this_uart->tx_buffer) && + (0u < this_uart->tx_buff_size)) + { + /* Read the Line Status Register and update the sticky record. */ + status = this_uart->hw_reg->LSR; + this_uart->status |= status; + + /* + * This function should only be called as a result of a THRE interrupt. + * Verify that this is true before proceeding to transmit data. + */ + if(status & MSS_UART_THRE) + { + uint32_t i; + uint32_t fill_size = TX_FIFO_SIZE; + uint32_t tx_remain = this_uart->tx_buff_size - this_uart->tx_idx; + + /* Calculate the number of bytes to transmit. */ + if(tx_remain < TX_FIFO_SIZE) + { + fill_size = tx_remain; + } + + /* Fill the TX FIFO with the calculated the number of bytes. */ + for(i = 0u; i < fill_size; ++i) + { + /* Send next character in the buffer. */ + this_uart->hw_reg->THR = this_uart->tx_buffer[this_uart->tx_idx]; + ++this_uart->tx_idx; + } + } + + /* Flag Tx as complete if all data has been pushed into the Tx FIFO. */ + if(this_uart->tx_idx == this_uart->tx_buff_size) + { + this_uart->tx_buff_size = TX_COMPLETE; + /* disables TX interrupt */ + clear_bit_reg8(&this_uart->hw_reg->IER,ETBEI); + } + } +} + +#ifdef __cplusplus +} +#endif diff --git a/bsp/smartfusion2/libraries/mss_uart/mss_uart.h b/bsp/smartfusion2/libraries/mss_uart/mss_uart.h new file mode 100644 index 0000000000000000000000000000000000000000..9efa7ed2343d79efcbc3ec2e3a1596e03e5ff062 --- /dev/null +++ b/bsp/smartfusion2/libraries/mss_uart/mss_uart.h @@ -0,0 +1,2639 @@ +/******************************************************************************* + * (c) Copyright 2011-2013 Microsemi SoC Products Group. All rights reserved. + * + * SmartFusion2 Microcontroller Subsystem MMUART bare metal software driver + * public API. + * + * SVN $Revision: 5610 $ + * SVN $Date: 2013-04-05 18:49:30 +0530 (Fri, 05 Apr 2013) $ + */ +/*=========================================================================*//** + @mainpage SmartFusion2 MSS UART Bare Metal Driver. + ============================================================================== + @section intro_sec Introduction + ============================================================================== + The SmartFusion2 microcontroller subsystem (MSS) includes two multi-mode UART + (MMUART) peripherals for serial communication. This driver provides a set of + functions for controlling the MSS MMUARTs as part of a bare metal system + where no operating system is available. These drivers can be adapted for use + as part of an operating system, but the implementation of the adaptation layer + between this driver and the operating system's driver model is outside the + scope of this driver. + Note: MSS UART is synonymous with MSS MMUART in this document. + + ============================================================================== + @section hw_dependencies Hardware Flow Dependencies + ============================================================================== + The configuration of all features of the MSS MMUART peripherals is covered by + this driver with the exception of the SmartFusion2 IOMUX configuration. + SmartFusion2 allows multiple non-concurrent uses of some external pins through + IOMUX configuration. This feature allows optimization of external pin usage by + assigning external pins for use by either the microcontroller subsystem or the + FPGA fabric. The MSS MMUART serial signals are routed through IOMUXs to the + SmartFusion2 device external pins. The MSS MMUART serial signals may also be + routed through IOMUXs to the SmartFusion2 FPGA fabric. For more information on + IOMUX, refer to the IOMUX section of the SmartFusion2 Microcontroller + Subsystem (MSS) User’s Guide. + The IOMUXs are configured using the SmartFusion2 MSS configurator tool. You + must ensure that the MSS MMUART peripherals are enabled and configured in the + SmartFusion2 MSS configurator if you wish to use them. For more information on + IOMUXs, refer to the IOMUX section of the SmartFusion2 Microcontroller + Subsystem (MSS) User’s Guide. + The base address, register addresses and interrupt number assignment for the + MSS MMUART peripherals are defined as constants in the SmartFusion2 CMSIS HAL. + You must ensure that the latest SmartFusion2 CMSIS HAL is included in the + project settings of the software tool chain used to build your project and + that it is generated into your project. + + ============================================================================== + @section theory_op Theory of Operation + ============================================================================== + The MSS MMUART driver functions are grouped into the following categories: + - Initialization and configuration functions + - Polled transmit and receive functions + - Interrupt driven transmit and receive functions + + -------------------------------- + Initialization and Configuration + -------------------------------- + The MSS MMUART supports the following four broad modes of operation: + - UART or USART mode + - LIN mode + - IrDA mode + - Smartcard or ISO 7816 mode + The MSS MMUART driver provides the MSS_UART_init(), MSS_UART_lin_init(), + MSS_UART_irda_init() and MSS_UART_smartcard_init() functions to initialize the + MSS MMUARTs for operation in one of these modes. One of these initialization + functions must be called before any other MSS MMUART driver functions can be + called. The MSS MMUART operating modes are mutually exclusive; therefore only + one of the initialization functions must be called. The first parameter of the + initialization functions is a pointer to one of two global data structures + used to store state information for each MSS MMUART. A pointer to these data + structures is also used as the first parameter to many of the driver functions + to identify which MSS MMUART will be used by the called function. The names of + these two data structures are g_mss_uart0 and g_mss_uart1. Therefore, any call + to an MSS MMUART function should be of the form + MSS_UART_function_name( &g_mss_uart0, ... ) or + MSS_UART_function_name( &g_mss_uart1, ... ). + + UART or USART Mode + For the UART or USART modes of operation, the MSS MMUART driver is initialized + through a call to the MSS_UART_init() function. This function takes the UART’s + configuration as its parameters. The MSS_UART_init() function must be called + before any other MSS MMUART driver functions can be called. + The MSS_UART_init() function configures the baud rate based on the input baud + rate parameter and if possible uses a fractional baud rate for greater + precision. This function disables the LIN, IrDA and SmartCard modes. + + LIN mode + For the LIN mode of operation, the MSS MMUART driver is initialized through a + call to the MSS_UART_lin_init() function. This function takes the LIN node’s + configuration as its parameters. The MSS_UART_lin_init() function must be + called before any other MSS MMUART driver functions can be called. The + MSS_UART_lin_init() function configures the baud rate based on the input baud + rate parameter and if possible uses a fractional baud rate for greater + precision. This function disables the IrDA and SmartCard modes. + The driver also provides the following LIN mode configuration functions: + - MSS_UART_set_break() + - MSS_UART_clear_break() + - MSS_UART_set_pidpei_handler() + - MSS_UART_set_linbreak_handler() + - MSS_UART_set_linsync_handler() + Note: These LIN mode configuration functions can only be called after the + MSS_UART_lin_init() function is called. + + IrDA mode + For the IrDA mode of operation, the driver is initialized through a call to + the MSS_UART_irda_init() function. This function takes the IrDA node’s + configuration as its parameters. The MSS_UART_irda_init() function must be + called before any other MSS MMUART driver functions can be called. The + MSS_UART_irda_init() function configures the baud rate based on the input baud + rate parameter and if possible uses a fractional baud rate for greater + precision. This function disables the LIN and SmartCard modes. + + Smartcard or ISO 7816 mode + For the Smartcard or ISO 7816 mode of operation, the driver is initialized + through a call to the MSS_UART_smartcard_init() function. This function takes + the smartcard configuration as its parameters. The MSS_UART_smartcard_init() + function must be called before any other MSS MMUART driver functions can be + called. The MSS_UART_smartcard_init() function configures the baud rate based + on the input baud rate parameter and if possible uses a fractional baud rate + for greater precision. This function disables the LIN and IrDA modes. + The driver also provides the following Smartcard mode configuration functions: + - MSS_UART_enable_halfduplex() + - MSS_UART_disable_halfduplex() + - MSS_UART_set_nack_handler() + Note: These Smartcard mode configuration functions can only be called after + the MSS_UART_smartcard_init() function is called. + + Common Configuration Functions + The driver also provides the configuration functions that can be used with all + MSS MMUART operating modes. These common configuration functions are as + follows: + - MSS_UART_set_rx_endian() + - MSS_UART_set_tx_endian() + - MSS_UART_enable_afclear() + - MSS_UART_disable_afclear() + - MSS_UART_enable_rx_timeout() + - MSS_UART_disable_rx_timeout() + - MSS_UART_enable_tx_time_guard() + - MSS_UART_disable_tx_time_guard() + - MSS_UART_set_address() + - MSS_UART_set_ready_mode() + - MSS_UART_set_usart_mode() + - MSS_UART_set_filter_length() + - MSS_UART_enable_afm() + - MSS_UART_disable_afm() + Note: These configuration functions can only be called after one of the + MSS_UART_init(), MSS_UART_lin_init(), MSS_UART_irda_init() or + MSS_UART_smartcard_init() functions is called. + + -------------------------------------- + Polled Transmit and Receive Operations + -------------------------------------- + The driver can be used to transmit and receive data once initialized. + Data is transmitted using the MSS_UART_polled_tx() function. This function is + blocking, meaning that it will only return once the data passed to the + function has been sent to the MSS MMUART hardware transmitter. Data received + by the MSS MMUART hardware receiver can be read by the MSS_UART_get_rx() + function. + The MSS_UART_polled_tx_string() function is provided to transmit a NULL (‘\0’) + terminated string in polled mode. This function is blocking, meaning that it + will only return once the data passed to the function has been sent to the MSS + MMUART hardware transmitter. + The MSS_UART_fill_tx_fifo() function fills the MSS MMUART hardware transmit + FIFO with data from a buffer passed as a parameter and returns the number of + bytes transferred to the FIFO. If the transmit FIFO is not empty when the + MSS_UART_fill_tx_fifo() function is called it returns immediately without + transferring any data to the FIFO. + + --------------------------- + Interrupt Driven Operations + --------------------------- + The driver can also transmit or receive data under interrupt control, freeing + your application to perform other tasks until an interrupt occurs indicating + that the driver’s attention is required. + + Interrupt Handlers + The MSS MMUART driver supports all types of interrupt triggered by the MSS + MMUART. The driver’s internal top level interrupt handler identifies the + source of the MSS MMUART interrupt and calls the corresponding lower level + handler function that you previously registered with the driver through calls + to the MSS_UART_set_rx_handler(), MSS_UART_set_tx_handler(), + MSS_UART_set_rxstatus_handler(), and MSS_UART_set_modemstatus_handler() + functions. You are responsible for creating these lower level interrupt + handlers as part of your application program and registering them with the + driver. + Note: The SmartFusion2 CMSIS-PAL defines the UART0_IRQHandler() and + UART1_IRQHandler() functions (with weak linkage) and assigns them as the + interrupt service routines (ISR) for the MSS MMUART interrupt inputs to + the Cortex-M3 NVIC. The MSS MMUART driver provides the implementation + functions for both of these ISRs from which it calls its own internal + top level, interrupt handler function. + The MSS_UART_enable_irq() and MSS_UART_disable_irq() functions are used to + enable or disable the received line status, received data available/character + timeout, transmit holding register empty and modem status interrupts at the + MSS MMUART level. The MSS_UART_enable_irq() function also enables the MSS + MMUART instance interrupt at the Cortex-M3 level. + + Transmitting Data + Interrupt-driven transmit is initiated by a call to MSS_UART_irq_tx(), + specifying the block of data to transmit. Your application is then free to + perform other tasks and inquire later whether transmit has completed by + calling the MSS_UART_tx_complete() function. The MSS_UART_irq_tx() function + enables the UART’s transmit holding register empty (THRE) interrupt and then, + when the interrupt goes active, the driver’s default THRE interrupt handler + transfers the data block to the UART until the entire block is transmitted. + Note: You can use the MSS_UART_set_tx_handler() function to assign an + alternative handler to the THRE interrupt. In this case, you must not + use the MSS_UART_irq_tx() function to initiate the transmit, as this + will re-assign the driver’s default THRE interrupt handler to the THRE + interrupt. Instead, your alternative THRE interrupt handler must include + a call to the MSS_UART_fill_tx_fifo() function to transfer the data to + the UART. + + Receiving Data + Interrupt-driven receive is performed by first calling + MSS_UART_set_rx_handler() to register a receive handler function that will be + called by the driver whenever receive data is available. You must provide this + receive handler function which must include a call to the MSS_UART_get_rx() + function to actually read the received data. + + ----------- + UART Status + ----------- + The function MSS_UART_get_rx_status() is used to read the receiver error + status. This function returns the overrun, parity, framing, break, and FIFO + error status of the receiver. + The function MSS_UART_get_tx_status() is used to read the transmitter status. + This function returns the transmit empty (TEMT) and transmit holding register + empty (THRE) status of the transmitter. + The function MSS_UART_get_modem_status() is used to read the modem status + flags. This function returns the current value of the modem status register. + + -------- + Loopback + -------- + The MSS_UART_set_loopback() function can be used to locally loopback the Tx + and Rx lines of a UART. This is not to be confused with the loopback of UART0 + to UART1, which can be achieved through the microcontroller subsystem’s system + registers. + + *//*=========================================================================*/ +#ifndef __MSS_UART_H_ +#define __MSS_UART_H_ 1 + +#include "../../CMSIS/m2sxxx.h" +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/***************************************************************************//** + Baud rates + The following definitions are used to specify standard baud rates as a + parameter to the MSS_UART_init() function. + */ +#define MSS_UART_110_BAUD 110 +#define MSS_UART_300_BAUD 300 +#define MSS_UART_1200_BAUD 1200 +#define MSS_UART_2400_BAUD 2400 +#define MSS_UART_4800_BAUD 4800 +#define MSS_UART_9600_BAUD 9600 +#define MSS_UART_19200_BAUD 19200 +#define MSS_UART_38400_BAUD 38400 +#define MSS_UART_57600_BAUD 57600 +#define MSS_UART_115200_BAUD 115200 +#define MSS_UART_230400_BAUD 230400 +#define MSS_UART_460800_BAUD 460800 +#define MSS_UART_921600_BAUD 921600 + +/***************************************************************************//** + Data Bits Length + The following defines are used to build the value of the MSS_UART_init() + function line_config parameter. + */ +#define MSS_UART_DATA_5_BITS ( (uint8_t) 0x00 ) +#define MSS_UART_DATA_6_BITS ( (uint8_t) 0x01 ) +#define MSS_UART_DATA_7_BITS ( (uint8_t) 0x02 ) +#define MSS_UART_DATA_8_BITS ( (uint8_t) 0x03 ) + +/***************************************************************************//** + Parity + The following defines are used to build the value of the MSS_UART_init() + function line_config parameter. + */ +#define MSS_UART_NO_PARITY ( (uint8_t) 0x00 ) +#define MSS_UART_ODD_PARITY ( (uint8_t) 0x08 ) +#define MSS_UART_EVEN_PARITY ( (uint8_t) 0x18 ) +#define MSS_UART_STICK_PARITY_0 ( (uint8_t) 0x38 ) +#define MSS_UART_STICK_PARITY_1 ( (uint8_t) 0x28 ) + +/***************************************************************************//** + Number of Stop Bits + The following defines are used to build the value of the MSS_UART_init() + function line_config parameter. + */ +#define MSS_UART_ONE_STOP_BIT ( (uint8_t) 0x00 ) +#define MSS_UART_ONEHALF_STOP_BIT ( (uint8_t) 0x04 ) +#define MSS_UART_TWO_STOP_BITS ( (uint8_t) 0x04 ) + +/***************************************************************************//** + Receiver Error Status + The following defines are used to determine the UART receiver error type. + These bit mask constants are used with the return value of the + MSS_UART_get_rx_status() function to find out if any errors occurred while + receiving data. + */ +#define MSS_UART_INVALID_PARAM ( (uint8_t)0xFF ) +#define MSS_UART_NO_ERROR ( (uint8_t)0x00 ) +#define MSS_UART_OVERUN_ERROR ( (uint8_t)0x02 ) +#define MSS_UART_PARITY_ERROR ( (uint8_t)0x04 ) +#define MSS_UART_FRAMING_ERROR ( (uint8_t)0x08 ) +#define MSS_UART_BREAK_ERROR ( (uint8_t)0x10 ) +#define MSS_UART_FIFO_ERROR ( (uint8_t)0x80 ) + +/***************************************************************************//** + Transmitter Status + The following definitions are used to determine the UART transmitter status. + These bit mask constants are used with the return value of the + MSS_UART_get_tx_status() function to find out the status of the transmitter. + */ +#define MSS_UART_TX_BUSY ( (uint8_t) 0x00 ) +#define MSS_UART_THRE ( (uint8_t) 0x20 ) +#define MSS_UART_TEMT ( (uint8_t) 0x40 ) + +/***************************************************************************//** + Modem Status + The following defines are used to determine the modem status. These bit + mask constants are used with the return value of the + MSS_UART_get_modem_status() function to find out the modem status of + the UART. + */ +#define MSS_UART_DCTS ( (uint8_t) 0x01 ) +#define MSS_UART_DDSR ( (uint8_t) 0x02 ) +#define MSS_UART_TERI ( (uint8_t) 0x04 ) +#define MSS_UART_DDCD ( (uint8_t) 0x08 ) +#define MSS_UART_CTS ( (uint8_t) 0x10 ) +#define MSS_UART_DSR ( (uint8_t) 0x20 ) +#define MSS_UART_RI ( (uint8_t) 0x40 ) +#define MSS_UART_DCD ( (uint8_t) 0x80 ) + +/***************************************************************************//** + This typedef specifies the irq_mask parameter for the MSS_UART_enable_irq() + and MSS_UART_disable_irq() functions. The driver defines a set of bit masks + that are used to build the value of the irq_mask parameter. A bitwise OR of + these bit masks is used to enable or disable multiple MSS MMUART interrupts. + */ +typedef uint16_t mss_uart_irq_t; + +/***************************************************************************//** + The following defines specify the interrupt masks to enable and disable MSS + MMUART interrupts. They are used to build the value of the irq_mask parameter + for the MSS_UART_enable_irq() and MSS_UART_disable_irq() functions. A bitwise + OR of these constants is used to enable or disable multiple interrupts. + */ +#define MSS_UART_RBF_IRQ 0x001 +#define MSS_UART_TBE_IRQ 0x002 +#define MSS_UART_LS_IRQ 0x004 +#define MSS_UART_MS_IRQ 0x008 +#define MSS_UART_RTO_IRQ 0x010 +#define MSS_UART_NACK_IRQ 0x020 +#define MSS_UART_PIDPE_IRQ 0x040 +#define MSS_UART_LINB_IRQ 0x080 +#define MSS_UART_LINS_IRQ 0x100 +#define MSS_UART_INVALID_IRQ UINT16_MAX + +/***************************************************************************//** + This enumeration specifies the receiver FIFO trigger level. This is the number + of bytes that must be received before the UART generates a receive data + available interrupt. It provides the allowed values for the + MSS_UART_set_rx_handler() function trigger_level parameter. + */ +typedef enum { + MSS_UART_FIFO_SINGLE_BYTE = 0x00, + MSS_UART_FIFO_FOUR_BYTES = 0x40, + MSS_UART_FIFO_EIGHT_BYTES = 0x80, + MSS_UART_FIFO_FOURTEEN_BYTES = 0xC0, + MSS_UART_FIFO_INVALID_TRIG_LEVEL +} mss_uart_rx_trig_level_t; + +/***************************************************************************//** + This enumeration specifies the loopback configuration of the UART. It provides + the allowed values for the MSS_UART_set_loopback() function’s loopback + parameter. Use MSS_UART_LOCAL_LOOPBACK_ON to set up the UART to locally + loopback its Tx and Rx lines. Use MSS_UART_REMOTE_LOOPBACK_ON to set up the + UART in remote loopback mode. + */ +typedef enum { + MSS_UART_LOCAL_LOOPBACK_OFF, + MSS_UART_LOCAL_LOOPBACK_ON, + MSS_UART_REMOTE_LOOPBACK_OFF, + MSS_UART_REMOTE_LOOPBACK_ON, + MSS_UART_AUTO_ECHO_OFF, + MSS_UART_AUTO_ECHO_ON, + MSS_UART_INVALID_LOOPBACK +} mss_uart_loopback_t; + +/***************************************************************************//** + IrDA input / output polarity. + This enumeration specifies the RZI modem polarity for input and output signals. + This is passed as parameters in MSS_UART_irda_init() function. + */ +typedef enum { + MSS_UART_ACTIVE_LOW = 0u, + MSS_UART_ACTIVE_HIGH = 1u, + MSS_UART_INVALID_POLARITY +} mss_uart_rzi_polarity_t; + +/***************************************************************************//** + IrDA input / output pulse width. + This enumeration specifies the RZI modem pulse width for input and output signals. + This is passed as parameters in MSS_UART_irda_init() function. + */ +typedef enum { + MSS_UART_3_BY_16 = 0u, + MSS_UART_1_BY_4 = 1u, + MSS_UART_INVALID_PW +} mss_uart_rzi_pulsewidth_t; + +/***************************************************************************//** + Tx / Rx endianess. + This enumeration specifies the MSB first or LSB first for MSS UART transmitter + and receiver. The parameter of this type shall be passed in + MSS_UART_set_rx_endian()and MSS_UART_set_tx_endian() functions. + */ +typedef enum { + MSS_UART_LITTLEEND, + MSS_UART_BIGEND, + MSS_UART_INVALID_ENDIAN +} mss_uart_endian_t; + +/***************************************************************************//** + Glitch filter length. + This enumeration specifies the glitch filter length. The function + MSS_UART_set_filter_length() accepts the parameter of this type. + */ +typedef enum { + MSS_UART_LEN0 = 0, + MSS_UART_LEN1 = 1, + MSS_UART_LEN2 = 2, + MSS_UART_LEN3 = 3, + MSS_UART_LEN4 = 4, + MSS_UART_LEN5 = 5, + MSS_UART_LEN6 = 6, + MSS_UART_LEN7 = 7, + MSS_UART_INVALID_FILTER_LENGTH = 8 +} mss_uart_filter_length_t; + +/***************************************************************************//** + TXRDY and RXRDY mode. + This enumeration specifies the TXRDY and RXRDY signal modes. The function + MSS_UART_set_ready_mode() accepts the parameter of this type. + */ +typedef enum { + MSS_UART_READY_MODE0, + MSS_UART_READY_MODE1, + MSS_UART_INVALID_READY_MODE +} mss_uart_ready_mode_t; + +/***************************************************************************//** + USART mode of operation. + This enumeration specifies the mode of operation of MSS UART when operating + as USART. The function MSS_UART_set_usart_mode() accepts the parameter of this type. + */ +typedef enum { + MSS_UART_ASYNC_MODE = 0, + MSS_UART_SYNC_SLAVE_POS_EDGE_CLK = 1, + MSS_UART_SYNC_SLAVE_NEG_EDGE_CLK = 2, + MSS_UART_SYNC_MASTER_POS_EDGE_CLK = 3, + MSS_UART_SYNC_MASTER_NEG_EDGE_CLK = 4, + MSS_UART_INVALID_SYNC_MODE = 5 +} mss_uart_usart_mode_t; + + +/***************************************************************************//** + MSS UART instance type. + This is type definition for MSS UART instance. You need to create and + maintain a record of this type. This holds all data regarding the MSS UART + instance + */ +typedef struct mss_uart_instance mss_uart_instance_t; + +/***************************************************************************//** + Interrupt handler prototype. + This typedef specifies the function prototype for MSS UART interrupt handlers. + All interrupt handlers registered with the MSS UART driver must be of this type. + The interrupt handlers are registered with the driver through the + MSS_UART_set_rx_handler(), MSS_UART_set_tx_handler(), + MSS_UART_set_rxstatus_handler(), and MSS_UART_set_modemstatus_handler() + functions. + The this_uart parameter is a pointer to either g_mss_uart0 or g_mss_uart1 to + identify the MSS UART to associate with the handler function. + */ +typedef void (*mss_uart_irq_handler_t)( mss_uart_instance_t * this_uart ); + +/***************************************************************************//** + mss_uart_instance. + There is one instance of this structure for each instance of the + microcontroller subsystem’s UARTs. Instances of this structure are used to + identify a specific UART. A pointer to an initialized instance of the + mss_uart_instance_t structure is passed as the first parameter to + MSS UART driver functions to identify which UART should perform the + requested operation. + */ +struct mss_uart_instance{ + /* CMSIS related defines identifying the UART hardware. */ + UART_TypeDef * hw_reg; /*!< Pointer to UART registers. */ + IRQn_Type irqn; /*!< UART's Cortex-M3 NVIC interrupt number. */ + uint32_t baudrate; /*!< Operating baud rate. */ + uint8_t lineconfig; /*!< Line configuration parameters. */ + uint8_t status; /*!< Sticky line status. */ + + /* transmit related info (used with interrupt driven transmit): */ + const uint8_t * tx_buffer; /*!< Pointer to transmit buffer. */ + uint32_t tx_buff_size; /*!< Transmit buffer size. */ + uint32_t tx_idx; /*!< Index within transmit buffer of next byte to transmit.*/ + + /* line status interrupt handler:*/ + mss_uart_irq_handler_t linests_handler; /*!< Pointer to user registered line status handler. */ + /* receive interrupt handler:*/ + mss_uart_irq_handler_t rx_handler; /*!< Pointer to user registered receiver handler. */ + /* transmit interrupt handler:*/ + mss_uart_irq_handler_t tx_handler; /*!< Pointer to user registered transmit handler. */ + /* modem status interrupt handler:*/ + mss_uart_irq_handler_t modemsts_handler; /*!< Pointer to user registered modem status handler. */ + /* receiver timeout interrupt handler */ + mss_uart_irq_handler_t rto_handler; /*!< Pointer to user registered receiver timeout handler. */ + /* NACK interrupt handler */ + mss_uart_irq_handler_t nack_handler; /*!< Pointer to user registered NACK handler. */ + /* PID parity prror interrup handler */ + mss_uart_irq_handler_t pid_pei_handler; /*!< Pointer to user registered PID parity error handler. */ + /* LIN break interrupt handler */ + mss_uart_irq_handler_t break_handler; /*!< Pointer to user registered LIN break handler. */ + /* LIN sync detection interrupt handler */ + mss_uart_irq_handler_t sync_handler; /*!< Pointer to user registered LIN sync dectection handler. */ +}; + +/***************************************************************************//** + This instance of mss_uart_instance_t holds all data related to the operations + performed by UART0. The function MSS_UART_init() initializes this structure. + A pointer to g_mss_uart0 is passed as the first parameter to MSS UART driver + functions to indicate that UART0 should perform the requested operation. + */ +extern mss_uart_instance_t g_mss_uart0; + +/***************************************************************************//** + This instance of mss_uart_instance_t holds all data related to the operations + performed by UART1. The function MSS_UART_init() initializes this structure. + A pointer to g_mss_uart1 is passed as the first parameter to MSS UART driver + functions to indicate that UART1 should perform the requested operation. + */ +extern mss_uart_instance_t g_mss_uart1; + +/***************************************************************************//** + The MSS_UART_init() function initializes and configures one of the SmartFusion2 + MSS UARTs with the configuration passed as a parameter. The configuration + parameters are the baud_rate which is used to generate the baud value and the + line_config which is used to specify the line configuration (bit length, + stop bits and parity). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t structure + identifying the MSS UART hardware block to be initialized. There are two + such data structures, g_mss_uart0 and g_mss_uart1, associated with MSS + UART0 and MSS UART1 respectively. This parameter must point to either + the g_mss_uart0 or g_mss_uart1 global data structure defined within + the UART driver.. + + @param baud_rate + The baud_rate parameter specifies the baud rate. It can be specified for + common baud rates’ using the following defines: + • MSS_UART_110_BAUD + • MSS_UART_300_BAUD + • MSS_UART_1200_BAUD + • MSS_UART_2400_BAUD + • MSS_UART_4800_BAUD + • MSS_UART_9600_BAUD + • MSS_UART_19200_BAUD + • MSS_UART_38400_BAUD + • MSS_UART_57600_BAUD + • MSS_UART_115200_BAUD + • MSS_UART_230400_BAUD + • MSS_UART_460800_BAUD + • MSS_UART_921600_BAUD + Alternatively, any nonstandard baud rate can be specified by simply passing + the actual required baud rate as the value for this parameter. + + @param line_config + The line_config parameter is the line configuration specifying the bit length, + number of stop bits and parity settings. This is a bitwise OR of one value + from each of the following groups of allowed values: + • One of the following to specify the transmit/receive data bit length: + MSS_UART_DATA_5_BITS + MSS_UART_DATA_6_BITS, + MSS_UART_DATA_7_BITS + MSS_UART_DATA_8_BITS + • One of the following to specify the parity setting: + MSS_UART_NO_PARITY + MSS_UART_EVEN_PARITY + MSS_UART_ODD_PARITY + MSS_UART_STICK_PARITY_0 + MSS_UART_STICK_PARITY_1 + • One of the following to specify the number of stop bits: + MSS_UART_ONE_STOP_BIT + MSS_UART_ONEHALF_STOP_BIT + MSS_UART_TWO_STOP_BITS + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + return(0); + } + @endcode + */ +void +MSS_UART_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +); + +/***************************************************************************//** + The MSS_UART_lin_init() function is used to initialize the MSS UART for + LIN mode of operation. The configuration parameters are the baud_rate which is + used to generate the baud value and the line_config which is used to specify + the line configuration (bit length, stop bits and parity). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param baud_rate + The baud_rate parameter specifies the baud rate. It can be specified for + common baud rates’ using the following defines: + • MSS_UART_110_BAUD + • MSS_UART_300_BAUD + • MSS_UART_1200_BAUD + • MSS_UART_2400_BAUD + • MSS_UART_4800_BAUD + • MSS_UART_9600_BAUD + • MSS_UART_19200_BAUD + • MSS_UART_38400_BAUD + • MSS_UART_57600_BAUD + • MSS_UART_115200_BAUD + • MSS_UART_230400_BAUD + • MSS_UART_460800_BAUD + • MSS_UART_921600_BAUD + Alternatively, any nonstandard baud rate can be specified by simply passing + the actual required baud rate as the value for this parameter. + + @param line_config + The line_config parameter is the line configuration specifying the bit length, + number of stop bits and parity settings. This is a bitwise OR of one value + from each of the following groups of allowed values: + • One of the following to specify the transmit/receive data bit length: + MSS_UART_DATA_5_BITS + MSS_UART_DATA_6_BITS, + MSS_UART_DATA_7_BITS + MSS_UART_DATA_8_BITS + • One of the following to specify the parity setting: + MSS_UART_NO_PARITY + MSS_UART_EVEN_PARITY + MSS_UART_ODD_PARITY + MSS_UART_STICK_PARITY_0 + MSS_UART_STICK_PARITY_1 + • One of the following to specify the number of stop bits: + MSS_UART_ONE_STOP_BIT + MSS_UART_ONEHALF_STOP_BIT + MSS_UART_TWO_STOP_BITS + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + MSS_UART_lin_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + return(0); + } + @endcode + */ +void +MSS_UART_lin_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +); + +/***************************************************************************//** + The MSS_UART_irda_init() function is used to initialize the MSS UART instance + referenced by the parameter this_uart for IrDA mode of operation. This + function must be called before calling any other IrDA functionality specific + functions. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param baud_rate + The baud_rate parameter specifies the baud rate. It can be specified for + common baud rates’ using the following defines: + • MSS_UART_110_BAUD + • MSS_UART_300_BAUD + • MSS_UART_1200_BAUD + • MSS_UART_2400_BAUD + • MSS_UART_4800_BAUD + • MSS_UART_9600_BAUD + • MSS_UART_19200_BAUD + • MSS_UART_38400_BAUD + • MSS_UART_57600_BAUD + • MSS_UART_115200_BAUD + • MSS_UART_230400_BAUD + • MSS_UART_460800_BAUD + • MSS_UART_921600_BAUD + Alternatively, any nonstandard baud rate can be specified by simply passing + the actual required baud rate as the value for this parameter. + + @param line_config + The line_config parameter is the line configuration specifying the bit length, + number of stop bits and parity settings. This is a bitwise OR of one value + from each of the following groups of allowed values: + • One of the following to specify the transmit/receive data bit length: + MSS_UART_DATA_5_BITS + MSS_UART_DATA_6_BITS, + MSS_UART_DATA_7_BITS + MSS_UART_DATA_8_BITS + • One of the following to specify the parity setting: + MSS_UART_NO_PARITY + MSS_UART_EVEN_PARITY + MSS_UART_ODD_PARITY + MSS_UART_STICK_PARITY_0 + MSS_UART_STICK_PARITY_1 + • One of the following to specify the number of stop bits: + MSS_UART_ONE_STOP_BIT + MSS_UART_ONEHALF_STOP_BIT + MSS_UART_TWO_STOP_BITS + + @return + This function does not return a value. + + Example: + @code + MSS_UART_irda_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT, + MSS_UART_ACTIVE_LOW, + MSS_UART_ACTIVE_LOW, + MSS_UART_3_BY_16); + @endcode + */ +void +MSS_UART_irda_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config, + mss_uart_rzi_polarity_t rxpol, + mss_uart_rzi_polarity_t txpol, + mss_uart_rzi_pulsewidth_t pw +); + +/***************************************************************************//** + The MSS_UART_smartcard_init() function is used to initialize the MSS UART + for ISO 7816 (smartcard) mode of operation. The configuration parameters are + the baud_rate which is used to generate the baud value and the line_config + which is used to specify the line configuration (bit length, stop bits and parity). + This function disables all other modes of the MSS UART instance pointed by + the parameter this_uart. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param baud_rate + The baud_rate parameter specifies the baud rate. It can be specified for + common baud rates’ using the following defines: + • MSS_UART_110_BAUD + • MSS_UART_300_BAUD + • MSS_UART_1200_BAUD + • MSS_UART_2400_BAUD + • MSS_UART_4800_BAUD + • MSS_UART_9600_BAUD + • MSS_UART_19200_BAUD + • MSS_UART_38400_BAUD + • MSS_UART_57600_BAUD + • MSS_UART_115200_BAUD + • MSS_UART_230400_BAUD + • MSS_UART_460800_BAUD + • MSS_UART_921600_BAUD + Alternatively, any nonstandard baud rate can be specified by simply passing + the actual required baud rate as the value for this parameter. + + @param line_config + The line_config parameter is the line configuration specifying the bit length, + number of stop bits and parity settings. This is a bitwise OR of one value + from each of the following groups of allowed values: + • One of the following to specify the transmit/receive data bit length: + MSS_UART_DATA_5_BITS + MSS_UART_DATA_6_BITS, + MSS_UART_DATA_7_BITS + MSS_UART_DATA_8_BITS + • One of the following to specify the parity setting: + MSS_UART_NO_PARITY + MSS_UART_EVEN_PARITY + MSS_UART_ODD_PARITY + MSS_UART_STICK_PARITY_0 + MSS_UART_STICK_PARITY_1 + • One of the following to specify the number of stop bits: + MSS_UART_ONE_STOP_BIT + MSS_UART_ONEHALF_STOP_BIT + MSS_UART_TWO_STOP_BITS + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + MSS_UART_smartcard_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + return(0); + } + @endcode + */ +void +MSS_UART_smartcard_init +( + mss_uart_instance_t* this_uart, + uint32_t baud_rate, + uint8_t line_config +); + +/***************************************************************************//** + The function MSS_UART_polled_tx() is used to transmit data. It transfers the + contents of the transmitter data buffer, passed as a function parameter, into + the UART’s hardware transmitter FIFO. It returns when the full content of the + transmit data buffer has been transferred to the UART’s transmit FIFO. It is + safe to release or reuse the memory used as the transmitter data buffer once + this function returns. + + Note: This function reads the UART’s line status register (LSR) to poll + for the active state of the transmitter holding register empty (THRE) bit + before transferring data from the data buffer to the transmitter FIFO. It + transfers data to the transmitter FIFO in blocks of 16 bytes or less and + allows the FIFO to empty before transferring the next block of data. + + Note: The actual transmission over the serial connection will still be + in progress when this function returns. Use the MSS_UART_get_tx_status() + function if you need to know when the transmitter is empty. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param pbuff + The pbuff parameter is a pointer to a buffer containing the data to + be transmitted. + + @param tx_size + The tx_size parameter specifies the size, in bytes, of the data to + be transmitted. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + uint8_t message[12] = "Hello World"; + + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_polled_tx(&g_mss_uart0, message, sizeof(message)); + + return(0); + } + @endcode + */ +void +MSS_UART_polled_tx +( + mss_uart_instance_t * this_uart, + const uint8_t * pbuff, + uint32_t tx_size +); + +/***************************************************************************//** + The function MSS_UART_polled_tx_string() is used to transmit a NULL ('\0') + terminated string. It transfers the text string, from the buffer starting at + the address pointed to by p_sz_string into the UART’s hardware transmitter + FIFO. It returns when the complete string has been transferred to the UART's + transmit FIFO. It is safe to release or reuse the memory used as the string + buffer once this function returns. + + Note: This function reads the UART’s line status register (LSR) to poll + for the active state of the transmitter holding register empty (THRE) bit + before transferring data from the data buffer to the transmitter FIFO. It + transfers data to the transmitter FIFO in blocks of 16 bytes or less and + allows the FIFO to empty before transferring the next block of data. + + Note: The actual transmission over the serial connection will still be + in progress when this function returns. Use the MSS_UART_get_tx_status() + function if you need to know when the transmitter is empty. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param p_sz_string + The p_sz_string parameter is a pointer to a buffer containing the NULL + ('\0') terminated string to be transmitted. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + uint8_t message[12] = "Hello World"; + + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_polled_tx_string(&g_mss_uart0, message); + + return(0); + } + @endcode + + */ +void +MSS_UART_polled_tx_string +( + mss_uart_instance_t * this_uart, + const uint8_t * p_sz_string +); + + +/***************************************************************************//** + The function MSS_UART_irq_tx() is used to initiate an interrupt-driven + transmit. It returns immediately after making a note of the transmit buffer + location and enabling transmit interrupts both at the UART and Cortex-M3 NVIC + level. This function takes a pointer via the pbuff parameter to a memory + buffer containing the data to transmit. The memory buffer specified through + this pointer must remain allocated and contain the data to transmit until + the transmit completion has been detected through calls to function + MSS_UART_tx_complete(). The actual transmission over the serial connection + is still in progress until calls to the MSS_UART_tx_complete() function + indicate transmit completion. + + Note: The MSS_UART_irq_tx() function enables both the transmit holding + register empty (THRE) interrupt in the UART and the MSS UART instance + interrupt in the Cortex-M3 NVIC as part of its implementation. + + Note: The MSS_UART_irq_tx() function assigns an internal default transmit + interrupt handler function to the UART’s THRE interrupt. This interrupt + handler overrides any custom interrupt handler that you may have previously + registered using the MSS_UART_set_tx_handler() function. + + Note: The MSS_UART_irq_tx() function’s default transmit interrupt + handler disables the UART’s THRE interrupt when all of the data has + been transferred to the UART's transmit FIFO. + + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param pbuff + The pbuff parameter is a pointer to a buffer containing the data + to be transmitted. + + @param tx_size + The tx_size parameter specifies the size, in bytes, of the data + to be transmitted. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + int main(void) + { + uint8_t tx_buff[10] = "abcdefghi"; + + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_irq_tx(&g_mss_uart0, tx_buff, sizeof(tx_buff)); + + while(0 == MSS_UART_tx_complete(&g_mss_uart0)) + { + ; + } + return(0); + } + @endcode + */ +void +MSS_UART_irq_tx +( + mss_uart_instance_t * this_uart, + const uint8_t * pbuff, + uint32_t tx_size +); + +/***************************************************************************//** + The MSS_UART_tx_complete() function is used to find out if the interrupt-driven + transmit previously initiated through a call to MSS_UART_irq_tx() is complete. + This is typically used to find out when it is safe to reuse or release the + memory buffer holding transmit data. + + Note: The transfer of all of the data from the memory buffer to the UART’s + transmit FIFO and the actual transmission over the serial connection are both + complete when a call to the MSS_UART_tx_complete() function indicates transmit + completion. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function return a non-zero value if transmit has completed, otherwise + it returns zero. + + Example: + See the MSS_UART_irq_tx() function for an example that uses the + MSS_UART_tx_complete() function. + */ +int8_t +MSS_UART_tx_complete +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_get_rx() function reads the content of the UART receiver’s FIFO + and stores it in the receive buffer that is passed via the rx_buff function + parameter. It copies either the full contents of the FIFO into the receive + buffer, or just enough data from the FIFO to fill the receive buffer, + dependent upon the size of the receive buffer passed by the buff_size + parameter. The MSS_UART_get_rx() function returns the number of bytes copied + into the receive buffer .This function is non-blocking and will return 0 + immediately if no data has been received. + + Note: The MSS_UART_get_rx() function reads and accumulates the receiver + status of the MSS UART instance before reading each byte from the receiver's + data register/FIFO. This allows the driver to maintain a sticky record of any + receiver errors that occur as the UART receives each data byte; receiver + errors would otherwise be lost after each read from the receiver's data register. + A call to the MSS_UART_get_rx_status() function returns any receiver errors + accumulated during the execution of the MSS_UART_get_rx() function. + + Note: If you need to read the error status for each byte received, set + the buff_size to 1 and read the receive line error status for each byte + using the MSS_UART_get_rx_status() function. + The MSS_UART_get_rx() function can be used in polled mode, where it is called + at regular intervals to find out if any data has been received, or in interrupt + driven-mode, where it is called as part of a receive handler that is called + by the driver as a result of data being received. + + Note: In interrupt driven mode you should call the MSS_UART_get_rx() + function as part of the receive handler function that you register with + the MSS UART driver through a call to MSS_UART_set_rx_handler(). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param rx_buff + The rx_buff parameter is a pointer to a buffer where the received + data is copied. + + @param buff_size + The buff_size parameter specifies the size of the receive buffer in bytes. + + @return + This function returns the number of bytes that were copied into the + rx_buff buffer. It returns 0 if no data has been received. + + Polled mode example: + @code + int main( void ) + { + uint8_t rx_buff[RX_BUFF_SIZE]; + uint32_t rx_idx = 0; + + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + while(1) + { + rx_size = MSS_UART_get_rx(&g_mss_uart0, rx_buff, sizeof(rx_buff)); + if(rx_size > 0) + { + process_rx_data(rx_buff, rx_size); + } + task_a(); + task_b(); + } + return 0; + } + @endcode + + Interrupt driven example: + @code + int main( void ) + { + MSS_UART_init(&g_mss_uart1, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_rx_handler(&g_mss_uart1, + uart1_rx_handler, + MSS_UART_FIFO_SINGLE_BYTE); + + while(1) + { + task_a(); + task_b(); + } + return 0; + } + + void uart1_rx_handler(mss_uart_instance_t * this_uart) + { + uint8_t rx_buff[RX_BUFF_SIZE]; + uint32_t rx_idx = 0; + rx_size = MSS_UART_get_rx(this_uart, rx_buff, sizeof(rx_buff)); + process_rx_data(rx_buff, rx_size); + } + @endcode + */ +size_t +MSS_UART_get_rx +( + mss_uart_instance_t * this_uart, + uint8_t * rx_buff, + size_t buff_size +); + +/***************************************************************************//** + The MSS_UART_set_rx_handler() function is used to register a receive handler + function that is called by the driver when a UART receive data available (RDA) + interrupt occurs. You must create and register the receive handler function + to suit your application and it must include a call to the MSS_UART_get_rx() + function to actually read the received data. + + Note: The MSS_UART_set_rx_handler() function enables both the RDA + interrupt in the UART and the MSS UART instance interrupt in the Cortex-M3 + NVIC as part + of its implementation. + + Note: You can disable the RDA interrupt once the data is received by + calling the MSS_UART_disable_irq() function. This is your choice and is + dependent upon your application. + + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is a pointer to a receive interrupt handler function + provided by your application that will be called as a result of a UART RDA + interrupt. This handler function must be of type mss_uart_irq_handler_t. + + @param trigger_level + The trigger_level parameter is the receive FIFO trigger level. This + specifies the number of bytes that must be received before the UART + triggers an RDA interrupt. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + #define RX_BUFF_SIZE 64 + + uint8_t g_rx_buff[RX_BUFF_SIZE]; + + void uart0_rx_handler(mss_uart_instance_t * this_uart) + { + MSS_UART_get_rx(this_uart, &g_rx_buff[g_rx_idx], sizeof(g_rx_buff)); + } + + int main(void) + { + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_rx_handler(&g_mss_uart0, + uart0_rx_handler, + MSS_UART_FIFO_SINGLE_BYTE); + + while(1) + { + ; + } + return(0); + } + @endcode + */ +void +MSS_UART_set_rx_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler, + mss_uart_rx_trig_level_t trigger_level +); + +/***************************************************************************//** + The MSS_UART_set_loopback() function is used to locally loopback the Tx and + Rx lines of a UART. This is not to be confused with the loopback of UART0 + to UART1, which can be achieved through the microcontroller subsystem’s + system registers. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param loopback + The loopback parameter indicates whether or not the UART’s transmit + and receive lines should be looped back. Allowed values are as follows: + - MSS_UART_LOCAL_LOOPBACK_ON + - MSS_UART_LOCAL_LOOPBACK_OFF + - MSS_UART_REMOTE_LOOPBACK_ON + - MSS_UART_REMOTE_LOOPBACK_OFF + - MSS_UART_AUTO_ECHO_ON + - MSS_UART_AUTO_ECHO_OFF + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_loopback(&g_mss_uart0, MSS_UART_LOCAL_LOOPBACK_OFF); + @endcode + */ +void +MSS_UART_set_loopback +( + mss_uart_instance_t * this_uart, + mss_uart_loopback_t loopback +); + +/***************************************************************************//** + The MSS_UART_enable_irq() function enables the MSS UART interrupts specified + by the irq_mask parameter. The irq_mask parameter identifies the MSS UART + interrupts by bit position, as defined in the interrupt enable register (IER) + of MSS UART. The MSS UART interrupts and their identifying irq_mask bit + positions are as follows: + When an irq_mask bit position is set to 1, this function enables the + corresponding MSS UART interrupt in the IER register. When an irq_mask bit + position is set to 0, the corresponding interrupt’s state remains unchanged in + the IER register. + Note: The MSS_UART_enable_irq() function also enables the MSS UART instance + interrupt in the Cortex-M3 NVIC. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t structure + identifying the MSS UART hardware block that will perform the requested + function. There are two such data structures, g_mss_uart0 and g_mss_uart1, + associated with MSS UART0 and MSS UART1. This parameter must point to either + the g_mss_uart0 or g_mss_uart1 global data structure defined within the UART + driver. + + @param irq_mask + The irq_mask parameter is used to select which of the MSS UART’s interrupts + you want to enable. The allowed value for the irq_mask parameter is one of + the following constants or a bitwise OR of more than one: + - MSS_UART_RBF_IRQ (bit mask = 0x001) + - MSS_UART_TBE_IRQ (bit mask = 0x002) + - MSS_UART_LS_IRQ (bit mask = 0x004) + - MSS_UART_MS_IRQ (bit mask = 0x008) + - MSS_UART_RTO_IRQ (bit mask = 0x010) + - MSS_UART_NACK_IRQ (bit mask = 0x020) + - MSS_UART_PIDPE_IRQ (bit mask = 0x040) + - MSS_UART_LINB_IRQ (bit mask = 0x080) + - MSS_UART_LINS_IRQ (bit mask = 0x100) + + @return + This function does not return a value. + + Example: + @code + MSS_UART_enable_irq(&g_mss_uart0,(MSS_UART_RBF_IRQ | MSS_UART_TBE_IRQ)); + @endcode + */ +void +MSS_UART_enable_irq +( + mss_uart_instance_t * this_uart, + mss_uart_irq_t irq_mask +); + +/***************************************************************************//** + The MSS_UART_disable_irq() function disables the MSS UART interrupts specified + by the irq_mask parameter. The irq_mask parameter identifies the MSS UART + interrupts by bit position, as defined in the interrupt enable register (IER) + of MSS UART. The MSS UART interrupts and their identifying bit positions are + as follows: + When an irq_mask bit position is set to 1, this function disables the + corresponding MSS UART interrupt in the IER register. When an irq_mask bit + position is set to 0, the corresponding interrupt’s state remains unchanged in + the IER register. + Note: If you disable all four of the UART’s interrupts, the + MSS_UART_disable_irq() function also disables the MSS UART instance + interrupt in the Cortex-M3 NVIC. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param irq_mask + The irq_mask parameter is used to select which of the MSS UART’s interrupts + you want to disable. The allowed value for the irq_mask parameter is one of + the following constants or a bitwise OR of more than one: + - MSS_UART_RBF_IRQ (bit mask = 0x001) + - MSS_UART_TBE_IRQ (bit mask = 0x002) + - MSS_UART_LS_IRQ (bit mask = 0x004) + - MSS_UART_MS_IRQ (bit mask = 0x008) + - MSS_UART_RTO_IRQ (bit mask = 0x010) + - MSS_UART_NACK_IRQ (bit mask = 0x020) + - MSS_UART_PIDPE_IRQ (bit mask = 0x040) + - MSS_UART_LINB_IRQ (bit mask = 0x080) + - MSS_UART_LINS_IRQ (bit mask = 0x100) + + @return + This function does not return a value. + + Example: + @code + MSS_UART_disable_irq(&g_mss_uart0, (MSS_UART_RBF_IRQ | MSS_UART_TBE_IRQ)); + @endcode + */ +void +MSS_UART_disable_irq +( + mss_uart_instance_t * this_uart, + mss_uart_irq_t irq_mask +); + +/***************************************************************************//** + The MSS_UART_set_pidpei_handler() function is used assign a custom interrupt + handler for the PIDPEI (PID parity error interrupt) when the MSS UART is + operating in LIN mode. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is the pointer to the custom handler function. + This parameter is of type mss_uart_irq_handler_t. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_ set_pidpei_handler(&g_mss_uart0, my_pidpei_handler); + @endcode + */ +void +MSS_UART_set_pidpei_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_linbreak_handler () function is used assign a custom + interrupt handler for the LIN Break detection interrupt when the MSS UART + is operating in LIN mode. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is the pointer to the custom handler function. + This parameter is of type mss_uart_irq_handler_t. + + @return + This function does not return a value. + Example: + @code + MSS_UART_set_linbreak_handler(&g_mss_uart0, my_break_handler); + @endcode + */ +void +MSS_UART_set_linbreak_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_linsync_handler() function is used assign a custom interrupt + handler for the LIN Sync character detection interrupt when the MSS UART + is operating in LIN mode. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is the pointer to the custom handler function. + This parameter is of type mss_uart_irq_handler_t. + + @return + This function does not return a value. + Example: + @code + MSS_UART_set_linsync_handler(&g_mss_uart0, my_linsync_handler); + @endcode + */ +void +MSS_UART_set_linsync_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_nack_handler() function is used assign a custom interrupt + handler for the NACK character detection interrupt when the MSS UART + is operating in Smartcard mode. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is the pointer to the custom handler function. + This parameter is of type mss_uart_irq_handler_t. + + @return + This function does not return a value. + Example: + @code + MSS_UART_set_nack_handler(&g_mss_uart0, my_nack_handler); + @endcode + */ +void +MSS_UART_set_nack_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_rx_timeout_handler() function is used assign a custom + interrupt handler for the receiver timeout interrupt when the MSS UART is + operating in mode. It finds application in IrDA mode of operation. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is the pointer to the custom handler function. + This parameter is of type mss_uart_irq_handler_t. + + @return + This function does not return a value. + Example: + @code + MSS_UART_set_rx_timeout_handler(&g_mss_uart0, my_rxtimeout_handler); + @endcode + */ +void +MSS_UART_set_rx_timeout_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_rxstatus_handler() function is used to register a receiver + status handler function that is called by the driver when a UART receiver + line status (RLS) interrupt occurs. You must create and register the handler + function to suit your application. + + Note: The MSS_UART_set_rxstatus_handler() function enables both the RLS + interrupt in the UART and the MSS UART instance interrupt in the Cortex-M3 + NVIC as part of its implementation. + + Note: You can disable the RLS interrupt when required by calling the + MSS_UART_disable_irq() function. This is your choice and is dependent upon + your application. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is a pointer to a receiver line status interrupt + handler function provided by your application that will be called as a + result of a UART RLS interrupt. This handler function must be of type + mss_uart_irq_handler_t. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + void uart_rxsts_handler(mss_uart_instance_t * this_uart) + { + uint8_t status; + status = MSS_UART_get_rx_status(this_uart); + if(status & MSS_UART_OVERUN_ERROR) + { + discard_rx_data(); + } + } + + int main(void) + { + MSS_UART_init( &g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | + MSS_UART_ONE_STOP_BIT ); + + MSS_UART_set_rxstatus_handler(&g_mss_uart0, uart_rxsts_handler); + + while(1) + { + ; + } + return(0); + } + @endcode + */ +void +MSS_UART_set_rxstatus_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_tx_handler() function is used to register a transmit handler + function that is called by the driver when a UART transmit holding register + empty (THRE) interrupt occurs. You must create and register the transmit + handler function to suit your application. You can use the + MSS_UART_fill_tx_fifo() function in your transmit handler function to + write data to the transmitter. + + Note: The MSS_UART_set_tx_handler() function enables both the THRE + interrupt in the UART and the MSS UART instance interrupt in the Cortex-M3 + NVIC as part of its implementation. + + Note: You can disable the THRE interrupt when required by calling the + MSS_UART_disable_irq() function. This is your choice and is dependent upon + your application. + + Note: The MSS_UART_irq_tx() function does not use the transmit handler + function that you register with the MSS_UART_set_tx_handler() function. + It uses its own internal THRE interrupt handler function that overrides + any custom interrupt handler that you register using the + MSS_UART_set_tx_handler() function. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is a pointer to a transmit interrupt handler + function provided by your application that will be called as a result + of a UART THRE interrupt. This handler function must be of type + mss_uart_irq_handler_t. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + uint8_t * g_tx_buffer; + size_t g_tx_size = 0; + + void uart_tx_handler(mss_uart_instance_t * this_uart) + { + size_t size_in_fifo; + size_in_fifo = MSS_UART_fill_tx_fifo(this_uart, + (const uint8_t *)g_tx_buffer, + g_tx_size); + + if(size_in_fifo == g_tx_size) + { + g_tx_size = 0; + MSS_UART_disable_irq(this_uart, MSS_UART_TBE_IRQ); + } + else + { + g_tx_buffer = &g_tx_buffer[size_in_fifo]; + g_tx_size = g_tx_size - size_in_fifo; + } + } + + int main(void) + { + uint8_t message[12] = "Hello world"; + + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | + MSS_UART_ONE_STOP_BIT); + + g_tx_buffer = message; + g_tx_size = sizeof(message); + + MSS_UART_set_tx_handler(&g_mss_uart0, uart_tx_handler); + + while(1) + { + ; + } + return(0); + } + @endcode + */ +void +MSS_UART_set_tx_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_set_modemstatus_handler() function is used to register a modem + status handler function that is called by the driver when a UART modem status + (MS) interrupt occurs. You must create and register the handler function to + suit your application. + + Note: The MSS_UART_set_modemstatus_handler() function enables both the MS + interrupt in the UART and the MSS UART instance interrupt in the Cortex-M3 NVIC + as part of its implementation. + + Note: You can disable the MS interrupt when required by calling the + MSS_UART_disable_irq() function. This is your choice and is dependent + upon your application. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param handler + The handler parameter is a pointer to a modem status interrupt handler + function provided by your application that will be called as a result + of a UART MS interrupt. This handler function must be of type + mss_uart_irq_handler_t. + + @return + This function does not return a value. + + Example: + @code + #include "mss_uart.h" + + void uart_modem_handler(mss_uart_instance_t * this_uart) + { + uint8_t status; + status = MSS_UART_get_modem_status(this_uart); + if(status & MSS_UART_CTS) + { + uart_cts_handler(); + } + } + + int main(void) + { + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | + MSS_UART_ONE_STOP_BIT); + MSS_UART_set_modemstatus_handler(&g_mss_uart0, uart_modem_handler); + + while(1) + { + ; + } + return(0); + } + @endcode + */ + +void +MSS_UART_set_modemstatus_handler +( + mss_uart_instance_t * this_uart, + mss_uart_irq_handler_t handler +); + +/***************************************************************************//** + The MSS_UART_fill_tx_fifo() function fills the UART's hardware transmitter + FIFO with the data found in the transmitter buffer that is passed via the + tx_buffer function parameter. If the transmitter FIFO is not empty when + the function is called, the function returns immediately without transferring + any data to the FIFO; otherwise, the function transfers data from the + transmitter buffer to the FIFO until it is full or until the complete + contents of the transmitter buffer have been copied into the FIFO. The + function returns the number of bytes copied into the UART's transmitter FIFO. + + Note: This function reads the UART’s line status register (LSR) to check + for the active state of the transmitter holding register empty (THRE) bit + before transferring data from the data buffer to the transmitter FIFO. If + THRE is 0, the function returns immediately, without transferring any data + to the FIFO. If THRE is 1, the function transfers up to 16 bytes of data + to the FIFO and then returns. + + Note: The actual transmission over the serial connection will still be + in progress when this function returns. Use the MSS_UART_get_tx_status() + function if you need to know when the transmitter is empty. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param tx_buffer + The tx_buffer parameter is a pointer to a buffer containing the data + to be transmitted. + + @param tx_size + The tx_size parameter is the size in bytes, of the data to be transmitted. + + @return + This function returns the number of bytes copied into the UART's + transmitter FIFO. + + Example: + @code + void send_using_interrupt(uint8_t * pbuff, size_t tx_size) + { + size_t size_in_fifo; + size_in_fifo = MSS_UART_fill_tx_fifo(&g_mss_uart0, pbuff, tx_size); + } + @endcode + */ +size_t +MSS_UART_fill_tx_fifo +( + mss_uart_instance_t * this_uart, + const uint8_t * tx_buffer, + size_t tx_size +); + +/***************************************************************************//** + The MSS_UART_get_rx_status() function returns the receiver error status of the + MSS UART instance. It reads both the current error status of the receiver from + the UART’s line status register (LSR) and the accumulated error status from + preceding calls to the MSS_UART_get_rx() function, and it combines them using + a bitwise OR. It returns the cumulative overrun, parity, framing, break and + FIFO error status of the receiver, since the previous call to + MSS_UART_get_rx_status(), as an 8-bit encoded value. + + Note: The MSS_UART_get_rx() function reads and accumulates the receiver + status of the MSS UART instance before reading each byte from the receiver’s + data register/FIFO. The driver maintains a sticky record of the cumulative + receiver error status, which persists after the MSS_UART_get_rx() function + returns. The MSS_UART_get_rx_status() function clears the driver’s sticky + receiver error record before returning. + + Note: The driver’s transmit functions also read the line status + register (LSR) as part of their implementation. When the driver reads the + LSR, the UART clears any active receiver error bits in the LSR. This could + result in the driver losing receiver errors. To avoid any loss of receiver + errors, the transmit functions also update the driver’s sticky record of the + cumulative receiver error status whenever they read the LSR. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function returns the UART’s receiver error status as an 8-bit unsigned + integer. The returned value is 0 if no receiver errors occurred. The driver + provides a set of bit mask constants that should be compared with and/or + used to mask the returned value to determine the receiver error status. + When the return value is compared to the following bit masks, a non-zero + result indicates that the corresponding error occurred: + • MSS_UART_OVERRUN_ERROR (bit mask = 0x02) + • MSS_UART_PARITY_ERROR (bit mask = 0x04) + • MSS_UART_FRAMING_ERROR (bit mask = 0x08) + • MSS_UART_BREAK_ERROR (bit mask = 0x10) + • MSS_UART_FIFO_ERROR (bit mask = 0x80) + When the return value is compared to the following bit mask, a non-zero + result indicates that no error occurred: + • MSS_UART_NO_ERROR (bit mask = 0x00) + Upon unsuccessful execution, this function returns: + • MSS_UART_INVALID_PARAM (bit mask = 0xFF) + + Example: + @code + uint8_t rx_data[MAX_RX_DATA_SIZE]; + uint8_t err_status; + err_status = MSS_UART_get_rx_status(&g_mss_uart0); + + if(MSS_UART_NO_ERROR == err_status) + { + rx_size = MSS_UART_get_rx(&g_mss_uart0, rx_data, MAX_RX_DATA_SIZE); + } + @endcode + */ +uint8_t +MSS_UART_get_rx_status +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_get_modem_status() function returns the modem status of the + MSS UART instance. It reads the modem status register (MSR) and returns + the 8 bit value. The bit encoding of the returned value is exactly the + same as the definition of the bits in the MSR. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function returns current state of the UART's MSR as an 8 bit + unsigned integer. The driver provides the following set of bit mask + constants that should be compared with and/or used to mask the + returned value to determine the modem status: + • MSS_UART_DCTS (bit mask = 0x01) + • MSS_UART_DDSR (bit mask = 0x02) + • MSS_UART_TERI (bit mask = 0x04) + • MSS_UART_DDCD (bit mask = 0x08) + • MSS_UART_CTS (bit mask = 0x10) + • MSS_UART_DSR (bit mask = 0x20) + • MSS_UART_RI (bit mask = 0x40) + • MSS_UART_DCD (bit mask = 0x80) + + Example: + @code + void uart_modem_status_isr(mss_uart_instance_t * this_uart) + { + uint8_t status; + status = MSS_UART_get_modem_status(this_uart); + if( status & MSS_UART_DCTS ) + { + uart_dcts_handler(); + } + if( status & MSS_UART_CTS ) + { + uart_cts_handler(); + } + } + @endcode + */ +uint8_t +MSS_UART_get_modem_status +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_get_tx_status() function returns the transmitter status of the + MSS UART instance. It reads both the UART’s line status register (LSR) and + returns the status of the transmit holding register empty (THRE) and + transmitter empty (TEMT) bits.* + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function returns the UART’s transmitter status as an 8-bit unsigned + integer. The returned value is 0 if the transmitter status bits are not + set or the function execution failed. The driver provides a set of bit + mask constants that should be compared with and/or used to mask the + returned value to determine the transmitter status. + When the return value is compared to the following bit mask, a non-zero + result indicates that the corresponding transmitter status bit is set: + • MSS_UART_THRE (bit mask = 0x20) + • MSS_UART_TEMT (bit mask = 0x40) + When the return value is compared to the following bit mask, a non-zero + result indicates that the transmitter is busy or the function execution + failed. + • MSS_UART_TX_BUSY (bit mask = 0x00) + + Example: + @code + uint8_t tx_buff[10] = "abcdefghi"; + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_polled_tx(&g_mss_uart0, tx_buff, sizeof(tx_buff)); + + while(!(MSS_UART_TEMT & MSS_UART_get_tx_status(&g_mss_uart0))) + { + ; + } + @endcode + */ +uint8_t +MSS_UART_get_tx_status +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_set_break() function is used to send the break + (9 zeros after stop bit) signal on the TX line. This function can be used + only when the MSS UART is initialized in LIN mode by using MSS_UART_lin_init(). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_break(&g_mss_uart0); + @endcode + */ +void +MSS_UART_set_break +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_clear_break() function is used to remove the break signal on the + TX line. This function can be used only when the MSS UART is initialized in + LIN mode by using MSS_UART_lin_init(). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_clear_break(&g_mss_uart0); + @endcode + */ +void +MSS_UART_clear_break +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_enable_half_duplex() function is used to enable the half-duplex + (single wire) mode for the MSS UART. Though it finds application in Smartcard + mode, half-duplex mode can be used in other modes as well. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_enable_half_duplex(&g_mss_uart0); + @endcode + */ +void +MSS_UART_enable_half_duplex +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_disable_half_duplex() function is used to disable the half-duplex + (single wire) mode for the MSS UART. Though it finds application in Smartcard + mode, half-duplex mode can be used in other modes as well. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_disable_half_duplex(&g_mss_uart0); + @endcode + */ +void +MSS_UART_disable_half_duplex +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_set_rx_endian() function is used to configure the LSB first or + MSB first setting for MSS UART receiver + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param endian + The endian parameter tells the LSB first or MSB first configuration. + This parameter is of type mss_uart_endian_t. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_rx_endian(&g_mss_uart0, MSS_UART_LITTLEEND); + @endcode + */ +void +MSS_UART_set_rx_endian +( + mss_uart_instance_t * this_uart, + mss_uart_endian_t endian +); + +/***************************************************************************//** + The MSS_UART_set_tx_endian() function is used to configure the LSB first or + MSB first setting for MSS UART transmitter. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param endian + The endian parameter tells the LSB first or MSB first configuration. + This parameter is of type mss_uart_endian_t. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_tx_endian(&g_mss_uart0, MSS_UART_LITTLEEND); + @endcode + */ +void +MSS_UART_set_tx_endian +( + mss_uart_instance_t * this_uart, + mss_uart_endian_t endian +); + +/***************************************************************************//** + The MSS_UART_set_filter_length () function is used to configure the glitch + filter length of the MSS UART. This should be configured in accordance with + the chosen baud rate. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param length + The length parameter is of mss_uart_filter_length_t type that determines + the length of the glitch filter. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_filter_length(&g_mss_uart0, MSS_UART_LEN2); + @endcode + */ +void +MSS_UART_set_filter_length +( + mss_uart_instance_t * this_uart, + mss_uart_filter_length_t length +); + +/***************************************************************************//** + The MSS_UART_enable_afm() function is used to enable address flag detection + mode of the MSS UART + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_enable_afm(&g_mss_uart0); + @endcode + */ +void +MSS_UART_enable_afm +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_disable_afm() function is used to disable address flag detection + mode of the MSS UART. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_disable_afm(&g_mss_uart0); + @endcode + */ +void +MSS_UART_disable_afm +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_enable_afclear () function is used to enable address flag clear + of the MSS UART. This should be used in conjunction with address flag + detection mode (AFM). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_enable_afclear(&g_mss_uart0); + @endcode + */ +void +MSS_UART_enable_afclear +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_disable_afclear () function is used to disable address flag + clear of the MSS UART. This should be used in conjunction with address flag + detection mode (AFM). + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_disable_afclear(&g_mss_uart0); + @endcode + */ +void +MSS_UART_disable_afclear +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_enable_rx_timeout() function is used to enable and configure + the receiver timeout functionality of MSS UART. This function accepts the + timeout parameter and applies the timeout based up on the baud rate as per + the formula 4 x timeout x bit time. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param timeout + The timeout parameter specifies the receiver timeout multiple. + It should be configured according to the baud rate in use. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_enable_rx_timeout(&g_mss_uart0 , 24); + @endcode + */ +void +MSS_UART_enable_rx_timeout +( + mss_uart_instance_t * this_uart, + uint8_t timeout +); + +/***************************************************************************//** + The MSS_UART_disable_rx_timeout() function is used to disable the receiver + timeout functionality of MSS UART. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_disable_rx_timeout(&g_mss_uart0); + @endcode + */ +void +MSS_UART_disable_rx_timeout +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_enable_tx_time_guard() function is used to enable and configure + the transmitter time guard functionality of MSS UART. This function accepts + the timeguard parameter and applies the timeguard based up on the baud rate + as per the formula timeguard x bit time. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_enable_tx_time_guard(&g_mss_uart0 , 24); + @endcode + */ +void +MSS_UART_enable_tx_time_guard +( + mss_uart_instance_t * this_uart, + uint8_t timeguard +); + +/***************************************************************************//** + The MSS_UART_disable_tx_time_guard() function is used to disable the + transmitter time guard functionality of MSS UART. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_disable_tx_time_guard(&g_mss_uart0); + @endcode + */ +void +MSS_UART_disable_tx_time_guard +( + mss_uart_instance_t * this_uart +); + +/***************************************************************************//** + The MSS_UART_set_address() function is used to set the 8-bit address for + the MSS UART referenced by this_uart parameter. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param address + The address parameter is the 8-bit address which is to be configured + to the MSS UART referenced by this_uart parameter. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_address(&g_mss_uart0, 0xAA); + @endcode + */ +void +MSS_UART_set_address +( + mss_uart_instance_t * this_uart, + uint8_t address +); + +/***************************************************************************//** + The MSS_UART_set_ready_mode() function is used to configure the MODE0 or MODE1 + to the TXRDY and RXRDY signals of the MSS UART referenced by this_uart + parameter. The mode parameter is used to provide the mode to be configured. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param mode + The mode parameter is the mss_uart_ready_mode_t type which is used to + configure the TXRDY and RXRDY signal modes. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_ready_mode(&g_mss_uart0, MSS_UART_READY_MODE0); + @endcode + */ +void +MSS_UART_set_ready_mode +( + mss_uart_instance_t * this_uart, + mss_uart_ready_mode_t mode +); + +/***************************************************************************//** + The MSS_UART_set_usart_mode() function is used to configure the MSS UART + referenced by the parameter this_uart in USART mode. Various USART modes + are supported which can be configured by the parameter mode of type + mss_uart_usart_mode_t. + + @param this_uart + The this_uart parameter is a pointer to an mss_uart_instance_t + structure identifying the MSS UART hardware block that will perform + the requested function. There are two such data structures, + g_mss_uart0 and g_mss_uart1, associated with MSS UART0 and MSS UART1. + This parameter must point to either the g_mss_uart0 or g_mss_uart1 + global data structure defined within the UART driver. + + @param mode + The mode parameter is the USART mode to be configured. + This parameter is of type mss_uart_usart_mode_t. + + @return + This function does not return a value. + + Example: + @code + MSS_UART_init(&g_mss_uart0, + MSS_UART_57600_BAUD, + MSS_UART_DATA_8_BITS | MSS_UART_NO_PARITY | MSS_UART_ONE_STOP_BIT); + + MSS_UART_set_usart_mode(&g_mss_uart0, MSS_UART_SYNC_MASTER_POS_EDGE_CLK); + @endcode + */ +void +MSS_UART_set_usart_mode +( + mss_uart_instance_t * this_uart, + mss_uart_usart_mode_t mode +); + +#ifdef __cplusplus +} +#endif + +#endif /* __MSS_UART_H_ */ diff --git a/bsp/smartfusion2/libraries/mss_uart/mss_uart_regs.h b/bsp/smartfusion2/libraries/mss_uart/mss_uart_regs.h new file mode 100644 index 0000000000000000000000000000000000000000..3079ad4ba3127db06c915dda1432f9fca0c8e347 --- /dev/null +++ b/bsp/smartfusion2/libraries/mss_uart/mss_uart_regs.h @@ -0,0 +1,83 @@ +/******************************************************************************* + * (c) Copyright 2011-2013 Microsemi SoC Products Group. All rights reserved. + * + * Register bit offsets and masks defintions for SmartFusion2 MSS MMUART. + * + * SVN $Revision: 5610 $ + * SVN $Date: 2013-04-05 18:49:30 +0530 (Fri, 05 Apr 2013) $ + */ +#ifndef MSS_UART_REGS_H_ +#define MSS_UART_REGS_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/******************************************************************************* + Register Bit definitions + */ + +/* Line Control register bit definitions */ +#define SB 6u /* Set break */ +#define DLAB 7u /* Divisor latch access bit */ + +/* FIFO Control register bit definitions */ +#define RXRDY_TXRDYN_EN 0u /* Enable TXRDY and RXRDY signals */ +#define CLEAR_RX_FIFO 1u /* Clear receiver FIFO */ +#define CLEAR_TX_FIFO 2u /* Clear transimtter FIFO */ +#define RDYMODE 3u /* Mode 0 or Mode 1 for TXRDY and RXRDY */ + +/* Modem Control register bit definitions */ +#define LOOP 4u /* Local loopback */ +#define RLOOP 5u /* Remote loopback */ +#define ECHO 6u /* Automatic echo */ +#define RLOOP_MASK 0x6u /* Remote loopback & Automatic echo*/ + +/* Line Status register bit definitions */ +#define DR 0u /* Data ready */ +#define THRE 5u /* Transmitter holding register empty */ +#define TEMT 6u /* Transitter empty */ + +/* Interrupt Enable register bit definitions */ +#define ERBFI 0u /* Enable receiver buffer full interrupt */ +#define ETBEI 1u /* Enable transmitter buffer empty interrupt */ +#define ELSI 2u /* Enable line status interrupt */ +#define EDSSI 3u /* Enable modem status interrupt */ + +/* Multimode register 0 bit definitions */ +#define ELIN 3u /* Enable LIN header detection */ +#define ETTG 5u /* Enable transmitter time guard */ +#define ERTO 6u /* Enable receiver time-out */ +#define EFBR 7u /* Enable fractional baud rate mode */ + +/* Multimode register 1 bit definitions */ +#define E_MSB_RX 0u /* MSB / LSB first for receiver */ +#define E_MSB_TX 1u /* MSB / LSB first for transmitter */ +#define EIRD 2u /* Enable IrDA modem */ +#define EIRX 3u /* Input polarity for IrDA modem */ +#define EITX 4u /* Output polarity for IrDA modem */ +#define EITP 5u /* Output pulse width for IrDA modem */ + +/* Multimode register 2 bit definitions */ +#define EERR 0u /* Enable ERR / NACK during stop time */ +#define EAFM 1u /* Enable 9-bit address flag mode */ +#define EAFC 2u /* Enable address flag clear */ +#define ESWM 3u /* Enable single wire half-duplex mode */ + +/* Multimode Interrupt Enable register and + Multimode Interrupt Identification register definitions */ +#define ERTOI 0u /* Enable receiver timeout interrupt */ +#define ENACKI 1u /* Enable NACK / ERR interrupt */ +#define EPID_PEI 2u /* Enable PID parity error interrupt */ +#define ELINBI 3u /* Enable LIN break interrupt */ +#define ELINSI 4u /* Enable LIN sync detection interrupt */ + + +#ifdef __cplusplus +} +#endif + +#endif /* MSS_UART_REGS_H_ */ + + + diff --git a/bsp/smartfusion2/libraries/sys_config/sys_config.c b/bsp/smartfusion2/libraries/sys_config/sys_config.c new file mode 100644 index 0000000000000000000000000000000000000000..b7d72fe08f1ca63501b36cc30d1eb3ce5ee89aa7 --- /dev/null +++ b/bsp/smartfusion2/libraries/sys_config/sys_config.c @@ -0,0 +1,385 @@ +/******************************************************************************* + * (c) Copyright 2012 Microsemi SoC Products Group. All rights reserved. + * + * Smartfusion2 system configuration. This file is automatically generated + * by the Libero tools. It contains the Smartfusion2 system configuration that + * was selected during the hardware configuration flow. + * + */ + +#include "../../CMSIS/m2sxxx.h" +#include "../../CMSIS/sys_init_cfg_types.h" +#include "sys_config.h" + +/*============================================================================== + * !!! WARNING !!! + *============================================================================== + * The project including this file must be linked so that the content of this + * file is located in internal eNVM at run time. The content of this file is + * used to configure the system prior to RAM content initialization. This means + * that the content of the data structures below will be used before the copy + * from LMA to VMA takes place. The LMA and VMA locations of the content of this + * file must be identical for the system to be seamlessly configured as part of + * the CMSIS boot process. + */ + +/*============================================================================== + * Clock configuration + */ +/* No configuration data structure required. */ + +/*============================================================================== + * Memory remapping configuration + */ +/* TBD. */ + +/*============================================================================== + * MDDR configuration + */ +#if MSS_SYS_MDDR_CONFIG_BY_CORTEX + +#include "sys_config_mddr_define.h" + +MDDR_TypeDef * const g_m2s_mddr_addr = (MDDR_TypeDef *)0x40020800; + +const ddr_subsys_cfg_t g_m2s_mddr_subsys_config = +{ + /*--------------------------------------------------------------------- + * DDR Controller registers. + * All registers are 16-bit wide unless mentioned beside the definition. + */ + { + MDDR_DDRC_DYN_SOFT_RESET_CR, + MDDR_DDRC_RESERVED0, + MDDR_DDRC_DYN_REFRESH_1_CR, + MDDR_DDRC_DYN_REFRESH_2_CR, + MDDR_DDRC_DYN_POWERDOWN_CR, + MDDR_DDRC_DYN_DEBUG_CR, + MDDR_DDRC_MODE_CR, + MDDR_DDRC_ADDR_MAP_BANK_CR, + MDDR_DDRC_ECC_DATA_MASK_CR, + MDDR_DDRC_ADDR_MAP_COL_1_CR, + MDDR_DDRC_ADDR_MAP_COL_2_CR, + MDDR_DDRC_ADDR_MAP_ROW_1_CR, + MDDR_DDRC_ADDR_MAP_ROW_2_CR, + MDDR_DDRC_INIT_1_CR, + MDDR_DDRC_CKE_RSTN_CYCLES_1_CR, + MDDR_DDRC_CKE_RSTN_CYCLES_2_CR, + MDDR_DDRC_INIT_MR_CR, + MDDR_DDRC_INIT_EMR_CR, + MDDR_DDRC_INIT_EMR2_CR, + MDDR_DDRC_INIT_EMR3_CR, + MDDR_DDRC_DRAM_BANK_TIMING_PARAM_CR, + MDDR_DDRC_DRAM_RD_WR_LATENCY_CR, + MDDR_DDRC_DRAM_RD_WR_PRE_CR, + MDDR_DDRC_DRAM_MR_TIMING_PARAM_CR, + MDDR_DDRC_DRAM_RAS_TIMING_CR, + MDDR_DDRC_DRAM_RD_WR_TRNARND_TIME_CR, + MDDR_DDRC_DRAM_T_PD_CR, + MDDR_DDRC_DRAM_BANK_ACT_TIMING_CR, + MDDR_DDRC_ODT_PARAM_1_CR, + MDDR_DDRC_ODT_PARAM_2_CR, + MDDR_DDRC_ADDR_MAP_COL_3_CR, + MDDR_DDRC_MODE_REG_RD_WR_CR, + MDDR_DDRC_MODE_REG_DATA_CR, + MDDR_DDRC_PWR_SAVE_1_CR, + MDDR_DDRC_PWR_SAVE_2_CR, + MDDR_DDRC_ZQ_LONG_TIME_CR, + MDDR_DDRC_ZQ_SHORT_TIME_CR, + MDDR_DDRC_ZQ_SHORT_INT_REFRESH_MARGIN_1_CR, + MDDR_DDRC_ZQ_SHORT_INT_REFRESH_MARGIN_2_CR, + MDDR_DDRC_PERF_PARAM_1_CR, + MDDR_DDRC_HPR_QUEUE_PARAM_1_CR, + MDDR_DDRC_HPR_QUEUE_PARAM_2_CR, + MDDR_DDRC_LPR_QUEUE_PARAM_1_CR, + MDDR_DDRC_LPR_QUEUE_PARAM_2_CR, + MDDR_DDRC_WR_QUEUE_PARAM_CR, + MDDR_DDRC_PERF_PARAM_2_CR, + MDDR_DDRC_PERF_PARAM_3_CR, + MDDR_DDRC_DFI_RDDATA_EN_CR, + MDDR_DDRC_DFI_MIN_CTRLUPD_TIMING_CR, + MDDR_DDRC_DFI_MAX_CTRLUPD_TIMING_CR, + MDDR_DDRC_DFI_WR_LVL_CONTROL_1_CR, + MDDR_DDRC_DFI_WR_LVL_CONTROL_2_CR, + MDDR_DDRC_DFI_RD_LVL_CONTROL_1_CR, + MDDR_DDRC_DFI_RD_LVL_CONTROL_2_CR, + MDDR_DDRC_DFI_CTRLUPD_TIME_INTERVAL_CR, + MDDR_DDRC_DYN_SOFT_RESET_ALIAS_CR, + MDDR_DDRC_AXI_FABRIC_PRI_ID_CR, + }, + + /*--------------------------------------------------------------------- + * DDR PHY configuration registers + */ + { + MDDR_PHY_LOOPBACK_TEST_CR, + MDDR_PHY_BOARD_LOOPBACK_CR, + MDDR_PHY_CTRL_SLAVE_RATIO_CR, + MDDR_PHY_CTRL_SLAVE_FORCE_CR, + MDDR_PHY_CTRL_SLAVE_DELAY_CR, + MDDR_PHY_DATA_SLICE_IN_USE_CR, + MDDR_PHY_LVL_NUM_OF_DQ0_CR, + MDDR_PHY_DQ_OFFSET_1_CR, + MDDR_PHY_DQ_OFFSET_2_CR, + MDDR_PHY_DQ_OFFSET_3_CR, + MDDR_PHY_DIS_CALIB_RST_CR, + MDDR_PHY_DLL_LOCK_DIFF_CR, + MDDR_PHY_FIFO_WE_IN_DELAY_1_CR, + MDDR_PHY_FIFO_WE_IN_DELAY_2_CR, + MDDR_PHY_FIFO_WE_IN_DELAY_3_CR, + MDDR_PHY_FIFO_WE_IN_FORCE_CR, + MDDR_PHY_FIFO_WE_SLAVE_RATIO_1_CR, + MDDR_PHY_FIFO_WE_SLAVE_RATIO_2_CR, + MDDR_PHY_FIFO_WE_SLAVE_RATIO_3_CR, + MDDR_PHY_FIFO_WE_SLAVE_RATIO_4_CR, + MDDR_PHY_GATELVL_INIT_MODE_CR, + MDDR_PHY_GATELVL_INIT_RATIO_1_CR, + MDDR_PHY_GATELVL_INIT_RATIO_2_CR, + MDDR_PHY_GATELVL_INIT_RATIO_3_CR, + MDDR_PHY_GATELVL_INIT_RATIO_4_CR, + MDDR_PHY_LOCAL_ODT_CR, + MDDR_PHY_INVERT_CLKOUT_CR, + MDDR_PHY_RD_DQS_SLAVE_DELAY_1_CR, + MDDR_PHY_RD_DQS_SLAVE_DELAY_2_CR, + MDDR_PHY_RD_DQS_SLAVE_DELAY_3_CR, + MDDR_PHY_RD_DQS_SLAVE_FORCE_CR, + MDDR_PHY_RD_DQS_SLAVE_RATIO_1_CR, + MDDR_PHY_RD_DQS_SLAVE_RATIO_2_CR, + MDDR_PHY_RD_DQS_SLAVE_RATIO_3_CR, + MDDR_PHY_RD_DQS_SLAVE_RATIO_4_CR, + MDDR_PHY_WR_DQS_SLAVE_DELAY_1_CR, + MDDR_PHY_WR_DQS_SLAVE_DELAY_2_CR, + MDDR_PHY_WR_DQS_SLAVE_DELAY_3_CR, + MDDR_PHY_WR_DQS_SLAVE_FORCE_CR, + MDDR_PHY_WR_DQS_SLAVE_RATIO_1_CR, + MDDR_PHY_WR_DQS_SLAVE_RATIO_2_CR, + MDDR_PHY_WR_DQS_SLAVE_RATIO_3_CR, + MDDR_PHY_WR_DQS_SLAVE_RATIO_4_CR, + MDDR_PHY_WR_DATA_SLAVE_DELAY_1_CR, + MDDR_PHY_WR_DATA_SLAVE_DELAY_2_CR, + MDDR_PHY_WR_DATA_SLAVE_DELAY_3_CR, + MDDR_PHY_WR_DATA_SLAVE_FORCE_CR, + MDDR_PHY_WR_DATA_SLAVE_RATIO_1_CR, + MDDR_PHY_WR_DATA_SLAVE_RATIO_2_CR, + MDDR_PHY_WR_DATA_SLAVE_RATIO_3_CR, + MDDR_PHY_WR_DATA_SLAVE_RATIO_4_CR, + MDDR_PHY_WRLVL_INIT_MODE_CR, + MDDR_PHY_WRLVL_INIT_RATIO_1_CR, + MDDR_PHY_WRLVL_INIT_RATIO_2_CR, + MDDR_PHY_WRLVL_INIT_RATIO_3_CR, + MDDR_PHY_WRLVL_INIT_RATIO_4_CR, + MDDR_PHY_WR_RD_RL_CR, + MDDR_PHY_RDC_FIFO_RST_ERR_CNT_CLR_CR, + MDDR_PHY_RDC_WE_TO_RE_DELAY_CR, + MDDR_PHY_USE_FIXED_RE_CR, + MDDR_PHY_USE_RANK0_DELAYS_CR, + MDDR_PHY_USE_LVL_TRNG_LEVEL_CR, + MDDR_PHY_DYN_CONFIG_CR, + MDDR_PHY_RD_WR_GATE_LVL_CR, + MDDR_PHY_DYN_RESET_CR + }, + + /*--------------------------------------------------------------------- + * FIC-64 registers + * These registers are 16-bit wide and 32-bit aligned. + */ + { + MDDR_DDR_FIC_NB_ADDR_CR, + MDDR_DDR_FIC_NBRWB_SIZE_CR, + MDDR_DDR_FIC_WB_TIMEOUT_CR, + MDDR_DDR_FIC_HPD_SW_RW_EN_CR, + MDDR_DDR_FIC_HPD_SW_RW_INVAL_CR, + MDDR_DDR_FIC_SW_WR_ERCLR_CR, + MDDR_DDR_FIC_ERR_INT_ENABLE_CR, + MDDR_DDR_FIC_NUM_AHB_MASTERS_CR, + MDDR_DDR_FIC_LOCK_TIMEOUTVAL_1_CR, + MDDR_DDR_FIC_LOCK_TIMEOUTVAL_2_CR, + MDDR_DDR_FIC_LOCK_TIMEOUT_EN_CR + } +}; + +#endif + +/*============================================================================== + * FDDR configuration + */ +#if MSS_SYS_FDDR_CONFIG_BY_CORTEX + +#include "sys_config_fddr_define.h" + +FDDR_TypeDef * const g_m2s_fddr_addr = (FDDR_TypeDef *)0x40021000; + +const fddr_sysreg_t g_m2s_fddr_sysreg_subsys_config = +{ + 0x0001u, /* PLL_CONFIG_LOW_1 */ + 0x0002u, /* PLL_CONFIG_LOW_2 */ + 0x0003u, /* PLL_CONFIG_HIGH */ + 0x0004u, /* FACC_CLK_EN */ + 0x0005u, /* FACC_MUX_CONFIG */ + 0x0006u, /* FACC_DIVISOR_RATIO */ + 0x0007u, /* PLL_DELAY_LINE_SEL */ + 0x0008u, /* SOFT_RESET */ + 0x0009u, /* IO_CALIB */ + 0x000Au, /* INTERRUPT_ENABLE */ + 0x000Bu, /* AXI_AHB_MODE_SEL */ + 0x000Cu /* PHY_SELF_REF_EN */ +}; + +const ddr_subsys_cfg_t g_m2s_fddr_subsys_config = +{ + /*--------------------------------------------------------------------- + * DDR Controller registers. + * All registers are 16-bit wide unless mentioned beside the definition. + */ + { + FDDR_DDRC_DYN_SOFT_RESET_CR, + FDDR_DDRC_RESERVED0, + FDDR_DDRC_DYN_REFRESH_1_CR, + FDDR_DDRC_DYN_REFRESH_2_CR, + FDDR_DDRC_DYN_POWERDOWN_CR, + FDDR_DDRC_DYN_DEBUG_CR, + FDDR_DDRC_MODE_CR, + FDDR_DDRC_ADDR_MAP_BANK_CR, + FDDR_DDRC_ECC_DATA_MASK_CR, + FDDR_DDRC_ADDR_MAP_COL_1_CR, + FDDR_DDRC_ADDR_MAP_COL_2_CR, + FDDR_DDRC_ADDR_MAP_ROW_1_CR, + FDDR_DDRC_ADDR_MAP_ROW_2_CR, + FDDR_DDRC_INIT_1_CR, + FDDR_DDRC_CKE_RSTN_CYCLES_1_CR, + FDDR_DDRC_CKE_RSTN_CYCLES_2_CR, + FDDR_DDRC_INIT_MR_CR, + FDDR_DDRC_INIT_EMR_CR, + FDDR_DDRC_INIT_EMR2_CR, + FDDR_DDRC_INIT_EMR3_CR, + FDDR_DDRC_DRAM_BANK_TIMING_PARAM_CR, + FDDR_DDRC_DRAM_RD_WR_LATENCY_CR, + FDDR_DDRC_DRAM_RD_WR_PRE_CR, + FDDR_DDRC_DRAM_MR_TIMING_PARAM_CR, + FDDR_DDRC_DRAM_RAS_TIMING_CR, + FDDR_DDRC_DRAM_RD_WR_TRNARND_TIME_CR, + FDDR_DDRC_DRAM_T_PD_CR, + FDDR_DDRC_DRAM_BANK_ACT_TIMING_CR, + FDDR_DDRC_ODT_PARAM_1_CR, + FDDR_DDRC_ODT_PARAM_2_CR, + FDDR_DDRC_ADDR_MAP_COL_3_CR, + FDDR_DDRC_MODE_REG_RD_WR_CR, + FDDR_DDRC_MODE_REG_DATA_CR, + FDDR_DDRC_PWR_SAVE_1_CR, + FDDR_DDRC_PWR_SAVE_2_CR, + FDDR_DDRC_ZQ_LONG_TIME_CR, + FDDR_DDRC_ZQ_SHORT_TIME_CR, + FDDR_DDRC_ZQ_SHORT_INT_REFRESH_MARGIN_1_CR, + FDDR_DDRC_ZQ_SHORT_INT_REFRESH_MARGIN_2_CR, + FDDR_DDRC_PERF_PARAM_1_CR, + FDDR_DDRC_HPR_QUEUE_PARAM_1_CR, + FDDR_DDRC_HPR_QUEUE_PARAM_2_CR, + FDDR_DDRC_LPR_QUEUE_PARAM_1_CR, + FDDR_DDRC_LPR_QUEUE_PARAM_2_CR, + FDDR_DDRC_WR_QUEUE_PARAM_CR, + FDDR_DDRC_PERF_PARAM_2_CR, + FDDR_DDRC_PERF_PARAM_3_CR, + FDDR_DDRC_DFI_RDDATA_EN_CR, + FDDR_DDRC_DFI_MIN_CTRLUPD_TIMING_CR, + FDDR_DDRC_DFI_MAX_CTRLUPD_TIMING_CR, + FDDR_DDRC_DFI_WR_LVL_CONTROL_1_CR, + FDDR_DDRC_DFI_WR_LVL_CONTROL_2_CR, + FDDR_DDRC_DFI_RD_LVL_CONTROL_1_CR, + FDDR_DDRC_DFI_RD_LVL_CONTROL_2_CR, + FDDR_DDRC_DFI_CTRLUPD_TIME_INTERVAL_CR, + FDDR_DDRC_DYN_SOFT_RESET_ALIAS_CR, + FDDR_DDRC_AXI_FABRIC_PRI_ID_CR + }, + + /*--------------------------------------------------------------------- + * DDR PHY configuration registers + */ + { + FDDR_PHY_LOOPBACK_TEST_CR, + FDDR_PHY_BOARD_LOOPBACK_CR, + FDDR_PHY_CTRL_SLAVE_RATIO_CR, + FDDR_PHY_CTRL_SLAVE_FORCE_CR, + FDDR_PHY_CTRL_SLAVE_DELAY_CR, + FDDR_PHY_DATA_SLICE_IN_USE_CR, + FDDR_PHY_LVL_NUM_OF_DQ0_CR, + FDDR_PHY_DQ_OFFSET_1_CR, + FDDR_PHY_DQ_OFFSET_2_CR, + FDDR_PHY_DQ_OFFSET_3_CR, + FDDR_PHY_DIS_CALIB_RST_CR, + FDDR_PHY_DLL_LOCK_DIFF_CR, + FDDR_PHY_FIFO_WE_IN_DELAY_1_CR, + FDDR_PHY_FIFO_WE_IN_DELAY_2_CR, + FDDR_PHY_FIFO_WE_IN_DELAY_3_CR, + FDDR_PHY_FIFO_WE_IN_FORCE_CR, + FDDR_PHY_FIFO_WE_SLAVE_RATIO_1_CR, + FDDR_PHY_FIFO_WE_SLAVE_RATIO_2_CR, + FDDR_PHY_FIFO_WE_SLAVE_RATIO_3_CR, + FDDR_PHY_FIFO_WE_SLAVE_RATIO_4_CR, + FDDR_PHY_GATELVL_INIT_MODE_CR, + FDDR_PHY_GATELVL_INIT_RATIO_1_CR, + FDDR_PHY_GATELVL_INIT_RATIO_2_CR, + FDDR_PHY_GATELVL_INIT_RATIO_3_CR, + FDDR_PHY_GATELVL_INIT_RATIO_4_CR, + FDDR_PHY_LOCAL_ODT_CR, + FDDR_PHY_INVERT_CLKOUT_CR, + FDDR_PHY_RD_DQS_SLAVE_DELAY_1_CR, + FDDR_PHY_RD_DQS_SLAVE_DELAY_2_CR, + FDDR_PHY_RD_DQS_SLAVE_DELAY_3_CR, + FDDR_PHY_RD_DQS_SLAVE_FORCE_CR, + FDDR_PHY_RD_DQS_SLAVE_RATIO_1_CR, + FDDR_PHY_RD_DQS_SLAVE_RATIO_2_CR, + FDDR_PHY_RD_DQS_SLAVE_RATIO_3_CR, + FDDR_PHY_RD_DQS_SLAVE_RATIO_4_CR, + FDDR_PHY_WR_DQS_SLAVE_DELAY_1_CR, + FDDR_PHY_WR_DQS_SLAVE_DELAY_2_CR, + FDDR_PHY_WR_DQS_SLAVE_DELAY_3_CR, + FDDR_PHY_WR_DQS_SLAVE_FORCE_CR, + FDDR_PHY_WR_DQS_SLAVE_RATIO_1_CR, + FDDR_PHY_WR_DQS_SLAVE_RATIO_2_CR, + FDDR_PHY_WR_DQS_SLAVE_RATIO_3_CR, + FDDR_PHY_WR_DQS_SLAVE_RATIO_4_CR, + FDDR_PHY_WR_DATA_SLAVE_DELAY_1_CR, + FDDR_PHY_WR_DATA_SLAVE_DELAY_2_CR, + FDDR_PHY_WR_DATA_SLAVE_DELAY_3_CR, + FDDR_PHY_WR_DATA_SLAVE_FORCE_CR, + FDDR_PHY_WR_DATA_SLAVE_RATIO_1_CR, + FDDR_PHY_WR_DATA_SLAVE_RATIO_2_CR, + FDDR_PHY_WR_DATA_SLAVE_RATIO_3_CR, + FDDR_PHY_WR_DATA_SLAVE_RATIO_4_CR, + FDDR_PHY_WRLVL_INIT_MODE_CR, + FDDR_PHY_WRLVL_INIT_RATIO_1_CR, + FDDR_PHY_WRLVL_INIT_RATIO_2_CR, + FDDR_PHY_WRLVL_INIT_RATIO_3_CR, + FDDR_PHY_WRLVL_INIT_RATIO_4_CR, + FDDR_PHY_WR_RD_RL_CR, + FDDR_PHY_RDC_FIFO_RST_ERR_CNT_CLR_CR, + FDDR_PHY_RDC_WE_TO_RE_DELAY_CR, + FDDR_PHY_USE_FIXED_RE_CR, + FDDR_PHY_USE_RANK0_DELAYS_CR, + FDDR_PHY_USE_LVL_TRNG_LEVEL_CR, + FDDR_PHY_DYN_CONFIG_CR, + FDDR_PHY_RD_WR_GATE_LVL_CR, + FDDR_PHY_DYN_RESET_CR, + }, + + /*--------------------------------------------------------------------- + * FIC-64 registers + * These registers are 16-bit wide and 32-bit aligned. + */ + { + FDDR_DDR_FIC_NB_ADDR_CR, + FDDR_DDR_FIC_NBRWB_SIZE_CR, + FDDR_DDR_FIC_WB_TIMEOUT_CR, + FDDR_DDR_FIC_HPD_SW_RW_EN_CR, + FDDR_DDR_FIC_HPD_SW_RW_INVAL_CR, + FDDR_DDR_FIC_SW_WR_ERCLR_CR, + FDDR_DDR_FIC_ERR_INT_ENABLE_CR, + FDDR_DDR_FIC_NUM_AHB_MASTERS_CR, + FDDR_DDR_FIC_LOCK_TIMEOUTVAL_1_CR, + FDDR_DDR_FIC_LOCK_TIMEOUTVAL_2_CR, + FDDR_DDR_FIC_LOCK_TIMEOUT_EN_CR + } +}; + +#endif + diff --git a/bsp/smartfusion2/libraries/sys_config/sys_config.h b/bsp/smartfusion2/libraries/sys_config/sys_config.h new file mode 100644 index 0000000000000000000000000000000000000000..65c49b1d7d58a5031bfe8403b441372b972dbba6 --- /dev/null +++ b/bsp/smartfusion2/libraries/sys_config/sys_config.h @@ -0,0 +1,66 @@ +/******************************************************************************* + * (c) Copyright 2012 Microsemi SoC Products Group. All rights reserved. + * + * Smartfusion2 system configuration. This file is automatically generated + * by the Libero tools. + * + */ +#ifndef MSS_SYSTEM_CONFIGURATION +#define MSS_SYSTEM_CONFIGURATION + +/*============================================================================== + * Clock configuration + */ +#include "sys_config_mss_clocks.h" + +/*============================================================================== + * Memory remapping configuration + */ +/* TBD */ + +/*============================================================================== + * FACC_INIT (Cortex-M3 runs the FACC INIT procedure) + * Only set to 1 for design targeting the M2S050T_ES device + */ +#define MSS_SYS_FACC_INIT_BY_CORTEX 0 + +/*============================================================================== + * MDDR configuration + */ +#define MSS_SYS_MDDR_CONFIG_BY_CORTEX 0 + +/*============================================================================== + * FDDR configuration + */ +#define MSS_SYS_FDDR_CONFIG_BY_CORTEX 0 + +/*============================================================================== + * SERDES Interface configuration + */ +#define MSS_SYS_SERDES_0_CONFIG_BY_CORTEX 0 +#if MSS_SYS_SERDES_0_CONFIG_BY_CORTEX +#include "sys_config_SERDESIF_0.h" +#endif + +#define MSS_SYS_SERDES_1_CONFIG_BY_CORTEX 0 +#if MSS_SYS_SERDES_1_CONFIG_BY_CORTEX +#include "sys_config_SERDESIF_1.h" +#endif + +#define MSS_SYS_SERDES_2_CONFIG_BY_CORTEX 0 +#if MSS_SYS_SERDES_2_CONFIG_BY_CORTEX +#include "sys_config_SERDESIF_2.h" +#endif + +#define MSS_SYS_SERDES_3_CONFIG_BY_CORTEX 0 +#if MSS_SYS_SERDES_3_CONFIG_BY_CORTEX +#include "sys_config_SERDESIF_3.h" +#endif + +/*============================================================================== + * Cache configuration + */ +#define MSS_SYS_CACHE_CONFIG_BY_CORTEX 0 + +#endif /* MSS_SYSTEM_CONFIGURATION */ + diff --git a/bsp/smartfusion2/libraries/sys_config/sys_config_mss_clocks.h b/bsp/smartfusion2/libraries/sys_config/sys_config_mss_clocks.h new file mode 100644 index 0000000000000000000000000000000000000000..1110c971694e9a59454f9589ef4a6f8003fc9796 --- /dev/null +++ b/bsp/smartfusion2/libraries/sys_config/sys_config_mss_clocks.h @@ -0,0 +1,21 @@ +/*=============================================================*/ +/* Created by Microsemi SmartDesign Fri May 22 15:04:18 2020 */ +/* */ +/* Warning: Do not modify this file, it may lead to unexpected */ +/* functional failures in your design. */ +/* */ +/*=============================================================*/ + +#ifndef SYS_CONFIG_MSS_CLOCKS +#define SYS_CONFIG_MSS_CLOCKS + +#define MSS_SYS_M3_CLK_FREQ 100000000u +#define MSS_SYS_MDDR_CLK_FREQ 100000000u +#define MSS_SYS_APB_0_CLK_FREQ 100000000u +#define MSS_SYS_APB_1_CLK_FREQ 100000000u +#define MSS_SYS_APB_2_CLK_FREQ 25000000u +#define MSS_SYS_FIC_0_CLK_FREQ 100000000u +#define MSS_SYS_FIC_1_CLK_FREQ 100000000u +#define MSS_SYS_FIC64_CLK_FREQ 100000000u + +#endif /* SYS_CONFIG_MSS_CLOCKS */ diff --git a/bsp/smartfusion2/project.uvopt b/bsp/smartfusion2/project.uvopt new file mode 100644 index 0000000000000000000000000000000000000000..99ce043dfead821fe44cc52ff12f187ae3695142 --- /dev/null +++ b/bsp/smartfusion2/project.uvopt @@ -0,0 +1,987 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + project + 0x4 + ARM-ADS + + 20000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\obj\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + + 0 + Datasheet + DATASHTS\Actel\M2Sxxx\SmartFusion2_DS.pdf + + + 1 + Technical Reference Manual + datashts\arm\cortex_m3\r2p1\DDI0337I_CORTEXM3_R2P1_TRM.PDF + + + 2 + Generic User Guide + datashts\arm\cortex_m3\r2p1\DUI0552A_CORTEX_M3_DGUG.PDF + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U10000387 -O207 -S8 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 + + + 0 + UL2CM3 + UL2CM3(-O207 -O207 -S9 -C0 -FO7 -FN1 -FC800 -FD20000000 -FF0M2Sxxx_256 -FL040000 -FS00 + + + + + 0 + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + Kernel + 0 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\clock.c + clock.c + 0 + 0 + + + 1 + 2 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\components.c + components.c + 0 + 0 + + + 1 + 3 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\device.c + device.c + 0 + 0 + + + 1 + 4 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\idle.c + idle.c + 0 + 0 + + + 1 + 5 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\ipc.c + ipc.c + 0 + 0 + + + 1 + 6 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\irq.c + irq.c + 0 + 0 + + + 1 + 7 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\kservice.c + kservice.c + 0 + 0 + + + 1 + 8 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\mem.c + mem.c + 0 + 0 + + + 1 + 9 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\mempool.c + mempool.c + 0 + 0 + + + 1 + 10 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\object.c + object.c + 0 + 0 + + + 1 + 11 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 1 + 12 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\signal.c + signal.c + 0 + 0 + + + 1 + 13 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\thread.c + thread.c + 0 + 0 + + + 1 + 14 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\src\timer.c + timer.c + 0 + 0 + + + + + Applications + 1 + 0 + 0 + 0 + + 2 + 15 + 1 + 0 + 0 + 14 + 0 + 1 + 16 + 0 + applications\main.c + main.c + 0 + 0 + + + 2 + 16 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 2 + 17 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + board\config.c + config.c + 0 + 0 + + + + + CMSIS + 0 + 0 + 0 + 0 + + 3 + 18 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + CMSIS\core_cm3.c + core_cm3.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + CMSIS\system_m2sxxx.c + system_m2sxxx.c + 0 + 0 + + + 3 + 20 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + CMSIS\startup_arm\startup_m2sxxx.s + startup_m2sxxx.s + 0 + 0 + + + + + Drivers + 1 + 0 + 0 + 0 + + 4 + 21 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + drivers\drv_uart.c + drv_uart.c + 0 + 0 + + + 4 + 22 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + + + Libraries + 1 + 0 + 0 + 0 + + 5 + 23 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + libraries\sys_config\sys_config.c + sys_config.c + 0 + 0 + + + 5 + 24 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + libraries\mss_gpio\mss_gpio.c + mss_gpio.c + 0 + 0 + + + 5 + 25 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + libraries\mss_uart\mss_uart.c + mss_uart.c + 0 + 0 + + + + + cpu + 0 + 0 + 0 + 0 + + 6 + 26 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 6 + 27 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 6 + 28 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 6 + 29 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\cpuport.c + cpuport.c + 0 + 0 + + + 6 + 30 + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + context_rvds.S + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 7 + 31 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 7 + 32 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + 7 + 33 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\completion.c + completion.c + 0 + 0 + + + 7 + 34 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\dataqueue.c + dataqueue.c + 0 + 0 + + + 7 + 35 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\pipe.c + pipe.c + 0 + 0 + + + 7 + 36 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 7 + 37 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 7 + 38 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\waitqueue.c + waitqueue.c + 0 + 0 + + + 7 + 39 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\drivers\src\workqueue.c + workqueue.c + 0 + 0 + + + + + finsh + 0 + 0 + 0 + 0 + + 8 + 40 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 8 + 41 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + 8 + 42 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + + + libc + 0 + 0 + 0 + 0 + + 9 + 43 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\libc.c + libc.c + 0 + 0 + + + 9 + 44 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\mem_std.c + mem_std.c + 0 + 0 + + + 9 + 45 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\stubs.c + stubs.c + 0 + 0 + + + 9 + 46 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + ..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + + diff --git a/bsp/smartfusion2/project.uvoptx b/bsp/smartfusion2/project.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..a83e5093d3b60c196881cec354659498bea2ade2 --- /dev/null +++ b/bsp/smartfusion2/project.uvoptx @@ -0,0 +1,801 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + project + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\obj\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 4 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U10000387 -O78 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256.FLM -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM)) + + + + + 0 + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + + + + Kernel + 0 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + ..\..\src\clock.c + clock.c + 0 + 0 + + + 1 + 2 + 1 + 0 + 0 + 0 + ..\..\src\components.c + components.c + 0 + 0 + + + 1 + 3 + 1 + 0 + 0 + 0 + ..\..\src\device.c + device.c + 0 + 0 + + + 1 + 4 + 1 + 0 + 0 + 0 + ..\..\src\idle.c + idle.c + 0 + 0 + + + 1 + 5 + 1 + 0 + 0 + 0 + ..\..\src\ipc.c + ipc.c + 0 + 0 + + + 1 + 6 + 1 + 0 + 0 + 0 + ..\..\src\irq.c + irq.c + 0 + 0 + + + 1 + 7 + 1 + 0 + 0 + 0 + ..\..\src\kservice.c + kservice.c + 0 + 0 + + + 1 + 8 + 1 + 0 + 0 + 0 + ..\..\src\mem.c + mem.c + 0 + 0 + + + 1 + 9 + 1 + 0 + 0 + 0 + ..\..\src\mempool.c + mempool.c + 0 + 0 + + + 1 + 10 + 1 + 0 + 0 + 0 + ..\..\src\object.c + object.c + 0 + 0 + + + 1 + 11 + 1 + 0 + 0 + 0 + ..\..\src\scheduler.c + scheduler.c + 0 + 0 + + + 1 + 12 + 1 + 0 + 0 + 0 + ..\..\src\signal.c + signal.c + 0 + 0 + + + 1 + 13 + 1 + 0 + 0 + 0 + ..\..\src\thread.c + thread.c + 0 + 0 + + + 1 + 14 + 1 + 0 + 0 + 0 + ..\..\src\timer.c + timer.c + 0 + 0 + + + + + Applications + 1 + 0 + 0 + 0 + + 2 + 15 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + 2 + 16 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 2 + 17 + 1 + 0 + 0 + 0 + board\config.c + config.c + 0 + 0 + + + + + CMSIS + 0 + 0 + 0 + 0 + + 3 + 18 + 1 + 0 + 0 + 0 + CMSIS\core_cm3.c + core_cm3.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + CMSIS\system_m2sxxx.c + system_m2sxxx.c + 0 + 0 + + + 3 + 20 + 2 + 0 + 0 + 0 + CMSIS\startup_arm\startup_m2sxxx.s + startup_m2sxxx.s + 0 + 0 + + + + + Drivers + 1 + 0 + 0 + 0 + + 4 + 21 + 1 + 0 + 0 + 0 + drivers\drv_uart.c + drv_uart.c + 0 + 0 + + + 4 + 22 + 1 + 0 + 0 + 0 + drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + + + Libraries + 1 + 0 + 0 + 0 + + 5 + 23 + 1 + 0 + 0 + 0 + libraries\sys_config\sys_config.c + sys_config.c + 0 + 0 + + + 5 + 24 + 1 + 0 + 0 + 0 + libraries\mss_gpio\mss_gpio.c + mss_gpio.c + 0 + 0 + + + 5 + 25 + 1 + 0 + 0 + 0 + libraries\mss_uart\mss_uart.c + mss_uart.c + 0 + 0 + + + + + cpu + 0 + 0 + 0 + 0 + + 6 + 26 + 1 + 0 + 0 + 0 + ..\..\libcpu\arm\common\backtrace.c + backtrace.c + 0 + 0 + + + 6 + 27 + 1 + 0 + 0 + 0 + ..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 6 + 28 + 1 + 0 + 0 + 0 + ..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 6 + 29 + 1 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\cpuport.c + cpuport.c + 0 + 0 + + + 6 + 30 + 2 + 0 + 0 + 0 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + context_rvds.S + 0 + 0 + + + + + DeviceDrivers + 0 + 0 + 0 + 0 + + 7 + 31 + 1 + 0 + 0 + 0 + ..\..\components\drivers\misc\pin.c + pin.c + 0 + 0 + + + 7 + 32 + 1 + 0 + 0 + 0 + ..\..\components\drivers\serial\serial.c + serial.c + 0 + 0 + + + 7 + 33 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\completion.c + completion.c + 0 + 0 + + + 7 + 34 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\dataqueue.c + dataqueue.c + 0 + 0 + + + 7 + 35 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\pipe.c + pipe.c + 0 + 0 + + + 7 + 36 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 7 + 37 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 7 + 38 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\waitqueue.c + waitqueue.c + 0 + 0 + + + 7 + 39 + 1 + 0 + 0 + 0 + ..\..\components\drivers\src\workqueue.c + workqueue.c + 0 + 0 + + + + + finsh + 0 + 0 + 0 + 0 + + 8 + 40 + 1 + 0 + 0 + 0 + ..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 8 + 41 + 1 + 0 + 0 + 0 + ..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + 8 + 42 + 1 + 0 + 0 + 0 + ..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + + + libc + 0 + 0 + 0 + 0 + + 9 + 43 + 1 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\libc.c + libc.c + 0 + 0 + + + 9 + 44 + 1 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\mem_std.c + mem_std.c + 0 + 0 + + + 9 + 45 + 1 + 0 + 0 + 0 + ..\..\components\libc\compilers\armlibc\stubs.c + stubs.c + 0 + 0 + + + 9 + 46 + 1 + 0 + 0 + 0 + ..\..\components\libc\compilers\common\time.c + time.c + 0 + 0 + + + + diff --git a/bsp/smartfusion2/project.uvproj b/bsp/smartfusion2/project.uvproj new file mode 100644 index 0000000000000000000000000000000000000000..34dc3659865857dcb400f8a9f46466e7a9a22a1d --- /dev/null +++ b/bsp/smartfusion2/project.uvproj @@ -0,0 +1,684 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + project + 0x4 + ARM-ADS + + + M2S010 + Microsemi + IRAM(0x20000000-0x2000FFFF) IROM(0x0-0x3FFFF) CLOCK(20000000) CPUTYPE("Cortex-M3") + + + UL2CM3(-O207 -S9 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000) + 6800 + + + + + + + + + + + + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + rtthread + 1 + 0 + 1 + 1 + 1 + .\obj\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin -o "$L@L.bin" "#L" + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM3 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 0 + + 0 + 6 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 0 + -1 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x0 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + RT_USING_ARM_LIBC + + .;..\..\include;applications;board;CMSIS;drivers;libraries\sys_config;libraries\mss_gpio;libraries\mss_uart;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m3;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\libc\compilers\armlibc;..\..\components\libc\compilers\common + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + .\applications\link.sct + + + + + + + + + + + Kernel + + + clock.c + 1 + ..\..\src\clock.c + + + components.c + 1 + ..\..\src\components.c + + + device.c + 1 + ..\..\src\device.c + + + idle.c + 1 + ..\..\src\idle.c + + + ipc.c + 1 + ..\..\src\ipc.c + + + irq.c + 1 + ..\..\src\irq.c + + + kservice.c + 1 + ..\..\src\kservice.c + + + mem.c + 1 + ..\..\src\mem.c + + + mempool.c + 1 + ..\..\src\mempool.c + + + object.c + 1 + ..\..\src\object.c + + + scheduler.c + 1 + ..\..\src\scheduler.c + + + signal.c + 1 + ..\..\src\signal.c + + + thread.c + 1 + ..\..\src\thread.c + + + timer.c + 1 + ..\..\src\timer.c + + + + + Applications + + + main.c + 1 + applications\main.c + + + board.c + 1 + board\board.c + + + config.c + 1 + board\config.c + + + + + CMSIS + + + core_cm3.c + 1 + CMSIS\core_cm3.c + + + system_m2sxxx.c + 1 + CMSIS\system_m2sxxx.c + + + startup_m2sxxx.s + 2 + CMSIS\startup_arm\startup_m2sxxx.s + + + + + Drivers + + + drv_uart.c + 1 + drivers\drv_uart.c + + + drv_gpio.c + 1 + drivers\drv_gpio.c + + + + + Libraries + + + sys_config.c + 1 + libraries\sys_config\sys_config.c + + + mss_gpio.c + 1 + libraries\mss_gpio\mss_gpio.c + + + mss_uart.c + 1 + libraries\mss_uart\mss_uart.c + + + + + cpu + + + backtrace.c + 1 + ..\..\libcpu\arm\common\backtrace.c + + + div0.c + 1 + ..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\libcpu\arm\common\showmem.c + + + cpuport.c + 1 + ..\..\libcpu\arm\cortex-m3\cpuport.c + + + context_rvds.S + 2 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + ..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\components\drivers\serial\serial.c + + + completion.c + 1 + ..\..\components\drivers\src\completion.c + + + dataqueue.c + 1 + ..\..\components\drivers\src\dataqueue.c + + + pipe.c + 1 + ..\..\components\drivers\src\pipe.c + + + ringblk_buf.c + 1 + ..\..\components\drivers\src\ringblk_buf.c + + + ringbuffer.c + 1 + ..\..\components\drivers\src\ringbuffer.c + + + waitqueue.c + 1 + ..\..\components\drivers\src\waitqueue.c + + + workqueue.c + 1 + ..\..\components\drivers\src\workqueue.c + + + + + finsh + + + shell.c + 1 + ..\..\components\finsh\shell.c + + + cmd.c + 1 + ..\..\components\finsh\cmd.c + + + msh.c + 1 + ..\..\components\finsh\msh.c + + + + + libc + + + libc.c + 1 + ..\..\components\libc\compilers\armlibc\libc.c + + + mem_std.c + 1 + ..\..\components\libc\compilers\armlibc\mem_std.c + + + stubs.c + 1 + ..\..\components\libc\compilers\armlibc\stubs.c + + + time.c + 1 + ..\..\components\libc\compilers\common\time.c + + + + + + + + diff --git a/bsp/smartfusion2/project.uvprojx b/bsp/smartfusion2/project.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..16914df12de7502feba994633f59eef2d72bc0df --- /dev/null +++ b/bsp/smartfusion2/project.uvprojx @@ -0,0 +1,667 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + project + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + M2S010 + Microsemi + Microsemi.M2Sxxx.1.0.64 + http://cores.actel-ip.com/CMSIS-Pack + IRAM(0x20000000,0x10000) IROM(0x00000000,0x40000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM)) + 0 + $$Device:M2S010$CMSIS\m2sxxx.h + + + + + + + + + + $$Device:M2S010$SVD\M2Sxxx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + rtthread + 1 + 0 + 1 + 1 + 1 + .\obj\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin -o "$L@L.bin" "#L" + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + + DCM.DLL + -pCM3 + SARMCM3.DLL + + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + -1 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x0 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + RT_USING_ARM_LIBC + + .;..\..\include;applications;board;CMSIS;drivers;libraries\sys_config;libraries\mss_gpio;libraries\mss_uart;..\..\libcpu\arm\common;..\..\libcpu\arm\cortex-m3;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\libc\compilers\armlibc;..\..\components\libc\compilers\common + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + .\applications\link.sct + + + + + + + + + + + Kernel + + + clock.c + 1 + ..\..\src\clock.c + + + components.c + 1 + ..\..\src\components.c + + + device.c + 1 + ..\..\src\device.c + + + idle.c + 1 + ..\..\src\idle.c + + + ipc.c + 1 + ..\..\src\ipc.c + + + irq.c + 1 + ..\..\src\irq.c + + + kservice.c + 1 + ..\..\src\kservice.c + + + mem.c + 1 + ..\..\src\mem.c + + + mempool.c + 1 + ..\..\src\mempool.c + + + object.c + 1 + ..\..\src\object.c + + + scheduler.c + 1 + ..\..\src\scheduler.c + + + signal.c + 1 + ..\..\src\signal.c + + + thread.c + 1 + ..\..\src\thread.c + + + timer.c + 1 + ..\..\src\timer.c + + + + + Applications + + + main.c + 1 + applications\main.c + + + board.c + 1 + board\board.c + + + config.c + 1 + board\config.c + + + + + CMSIS + + + core_cm3.c + 1 + CMSIS\core_cm3.c + + + system_m2sxxx.c + 1 + CMSIS\system_m2sxxx.c + + + startup_m2sxxx.s + 2 + CMSIS\startup_arm\startup_m2sxxx.s + + + + + Drivers + + + drv_uart.c + 1 + drivers\drv_uart.c + + + drv_gpio.c + 1 + drivers\drv_gpio.c + + + + + Libraries + + + sys_config.c + 1 + libraries\sys_config\sys_config.c + + + mss_gpio.c + 1 + libraries\mss_gpio\mss_gpio.c + + + mss_uart.c + 1 + libraries\mss_uart\mss_uart.c + + + + + cpu + + + backtrace.c + 1 + ..\..\libcpu\arm\common\backtrace.c + + + div0.c + 1 + ..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\libcpu\arm\common\showmem.c + + + cpuport.c + 1 + ..\..\libcpu\arm\cortex-m3\cpuport.c + + + context_rvds.S + 2 + ..\..\libcpu\arm\cortex-m3\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + ..\..\components\drivers\misc\pin.c + + + serial.c + 1 + ..\..\components\drivers\serial\serial.c + + + completion.c + 1 + ..\..\components\drivers\src\completion.c + + + dataqueue.c + 1 + ..\..\components\drivers\src\dataqueue.c + + + pipe.c + 1 + ..\..\components\drivers\src\pipe.c + + + ringblk_buf.c + 1 + ..\..\components\drivers\src\ringblk_buf.c + + + ringbuffer.c + 1 + ..\..\components\drivers\src\ringbuffer.c + + + waitqueue.c + 1 + ..\..\components\drivers\src\waitqueue.c + + + workqueue.c + 1 + ..\..\components\drivers\src\workqueue.c + + + + + finsh + + + shell.c + 1 + ..\..\components\finsh\shell.c + + + cmd.c + 1 + ..\..\components\finsh\cmd.c + + + msh.c + 1 + ..\..\components\finsh\msh.c + + + + + libc + + + libc.c + 1 + ..\..\components\libc\compilers\armlibc\libc.c + + + mem_std.c + 1 + ..\..\components\libc\compilers\armlibc\mem_std.c + + + stubs.c + 1 + ..\..\components\libc\compilers\armlibc\stubs.c + + + time.c + 1 + ..\..\components\libc\compilers\common\time.c + + + + + + + + + + + + + + diff --git a/bsp/smartfusion2/rtconfig.h b/bsp/smartfusion2/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..998d3aefffc8b162445abf21f241fb1d4db650aa --- /dev/null +++ b/bsp/smartfusion2/rtconfig.h @@ -0,0 +1,165 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 100 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 +#define RT_USING_TIMER_SOFT +#define RT_TIMER_THREAD_PRIO 4 +#define RT_TIMER_THREAD_STACK_SIZE 512 +#define RT_DEBUG + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart0" +#define RT_VER_NUM 0x40003 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 1024 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_USING_MSH_ONLY +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_USING_LIBC + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + + +/* peripheral libraries and drivers */ + + +/* miscellaneous packages */ + + +/* samples: kernel and components samples */ + + +/* Hardware Drivers Config */ + +/* On-chip Peripheral Drivers */ + +/* UART Drivers */ + +#define BSP_USING_UART0 +#define BSP_USING_UART1 + +/* GPIO Drivers */ + +#define BSP_USING_GPIO +#define SOC_SF2_M2S010 + +#endif diff --git a/bsp/smartfusion2/rtconfig.py b/bsp/smartfusion2/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..374dc7834b3f02a9e4bb290fa6a2f243263b1908 --- /dev/null +++ b/bsp/smartfusion2/rtconfig.py @@ -0,0 +1,82 @@ +import os +import sys + +CROSS_TOOL = 'gcc' + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +# device options +ARCH = 'arm' +CPU = 'cortex-m3' + +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = 'D:/Program/env/tools/gnu_gcc/arm_gcc/mingw/bin' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = 'D:/Program/Keil_v5' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +# BUILD = 'debug' +BUILD = 'release' + +if PLATFORM == 'gcc': + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + CXX = PREFIX + 'g++' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections -Wall' + CFLAGS = DEVICE + ' -std=c99' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + # link script file path + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T CMSIS/startup_gcc/debug-in-microsemi-smartfusion2-envm.ld' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + OBJCPY + ' -O ihex $TARGET rtthread.hex\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu ' + CPU + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + # link scatter file path + LFLAGS = DEVICE + ' --scatter "applications/link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict' + + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/INC' + LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/ARMCC/LIB' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/arm/armcc/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' diff --git a/bsp/smartfusion2/template.uvopt b/bsp/smartfusion2/template.uvopt new file mode 100644 index 0000000000000000000000000000000000000000..70eae785e9888c3e9289adb57926a3d9ddb1884d --- /dev/null +++ b/bsp/smartfusion2/template.uvopt @@ -0,0 +1,187 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + + + + 0 + 0 + + + + project + 0x4 + ARM-ADS + + 20000000 + + 1 + 1 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\obj\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 255 + + + 0 + Datasheet + DATASHTS\Actel\M2Sxxx\SmartFusion2_DS.pdf + + + 1 + Technical Reference Manual + datashts\arm\cortex_m3\r2p1\DDI0337I_CORTEXM3_R2P1_TRM.PDF + + + 2 + Generic User Guide + datashts\arm\cortex_m3\r2p1\DUI0552A_CORTEX_M3_DGUG.PDF + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + 6 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U10000387 -O207 -S8 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 + + + 0 + UL2CM3 + UL2CM3(-O207 -O207 -S9 -C0 -FO7 -FN1 -FC800 -FD20000000 -FF0M2Sxxx_256 -FL040000 -FS00 + + + + + 0 + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/smartfusion2/template.uvoptx b/bsp/smartfusion2/template.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..6c9677efdea8e78fc0ed45ec0fd3a6b6dc941cce --- /dev/null +++ b/bsp/smartfusion2/template.uvoptx @@ -0,0 +1,185 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + project + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\obj\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 255 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 4 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U10000387 -O78 -S8 -ZTIFSpeedSel50000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256.FLM -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM)) + + + + + 0 + + + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/smartfusion2/template.uvproj b/bsp/smartfusion2/template.uvproj new file mode 100644 index 0000000000000000000000000000000000000000..99fded24dc32f540d11e1f376e6de3c1ae574ddf --- /dev/null +++ b/bsp/smartfusion2/template.uvproj @@ -0,0 +1,412 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + project + 0x4 + ARM-ADS + + + M2S010 + Microsemi + IRAM(0x20000000-0x2000FFFF) IROM(0x0-0x3FFFF) CLOCK(20000000) CPUTYPE("Cortex-M3") + + + UL2CM3(-O207 -S9 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000) + 6800 + + + + + + + + + + + + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + rtthread + 1 + 0 + 1 + 1 + 1 + .\obj\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 1 + 0 + fromelf --bin -o "$L@L.bin" "#L" + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM3 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 0 + + 0 + 6 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 0 + -1 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x0 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + .\applications\link.sct + + + + + + + + + + + Source Group 1 + + + + + + diff --git a/bsp/smartfusion2/template.uvprojx b/bsp/smartfusion2/template.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..dbfd0815c27d7014df55a6de0b63a7c8e2163402 --- /dev/null +++ b/bsp/smartfusion2/template.uvprojx @@ -0,0 +1,395 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + project + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + M2S010 + Microsemi + Microsemi.M2Sxxx.1.0.64 + http://cores.actel-ip.com/CMSIS-Pack + IRAM(0x20000000,0x10000) IROM(0x00000000,0x40000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0M2Sxxx_256 -FS00 -FL040000 -FP0($$Device:M2S010$Flash\M2Sxxx_256.FLM)) + 0 + $$Device:M2S010$CMSIS\m2sxxx.h + + + + + + + + + + $$Device:M2S010$SVD\M2Sxxx.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + rtthread + 1 + 0 + 1 + 1 + 1 + .\obj\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin -o "$L@L.bin" "#L" + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + + DCM.DLL + -pCM3 + SARMCM3.DLL + + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + -1 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x0 + 0x40000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x40000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 0 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + .\applications\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + +