提交 a8b8d57c 编写于 作者: G Greg Ungerer 提交者: Linus Torvalds

[PATCH] m68knommu: ColdFire serial driver fixes

Some updates for the old ColdFire serial driver:

 . support 3 and 4 UARTs on some ColdFire parts that have them
 . enable multifunction pins to serial for 527x CPU's
 . support the 5272 UART's fractional baud rate divisor
 . switch driver name to "mcfserial"
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 dcb14775
...@@ -60,7 +60,8 @@ struct timer_list mcfrs_timer_struct; ...@@ -60,7 +60,8 @@ struct timer_list mcfrs_timer_struct;
#if defined(CONFIG_HW_FEITH) #if defined(CONFIG_HW_FEITH)
#define CONSOLE_BAUD_RATE 38400 #define CONSOLE_BAUD_RATE 38400
#define DEFAULT_CBAUD B38400 #define DEFAULT_CBAUD B38400
#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || defined(CONFIG_M5329EVB) #elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
#define CONSOLE_BAUD_RATE 115200 #define CONSOLE_BAUD_RATE 115200
#define DEFAULT_CBAUD B115200 #define DEFAULT_CBAUD B115200
#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
...@@ -109,12 +110,30 @@ static struct mcf_serial mcfrs_table[] = { ...@@ -109,12 +110,30 @@ static struct mcf_serial mcfrs_table[] = {
.irq = IRQBASE, .irq = IRQBASE,
.flags = ASYNC_BOOT_AUTOCONF, .flags = ASYNC_BOOT_AUTOCONF,
}, },
#ifdef MCFUART_BASE2
{ /* ttyS1 */ { /* ttyS1 */
.magic = 0, .magic = 0,
.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
.irq = IRQBASE+1, .irq = IRQBASE+1,
.flags = ASYNC_BOOT_AUTOCONF, .flags = ASYNC_BOOT_AUTOCONF,
}, },
#endif
#ifdef MCFUART_BASE3
{ /* ttyS2 */
.magic = 0,
.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
.irq = IRQBASE+2,
.flags = ASYNC_BOOT_AUTOCONF,
},
#endif
#ifdef MCFUART_BASE4
{ /* ttyS3 */
.magic = 0,
.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
.irq = IRQBASE+3,
.flags = ASYNC_BOOT_AUTOCONF,
},
#endif
}; };
...@@ -1516,6 +1535,22 @@ static void mcfrs_irqinit(struct mcf_serial *info) ...@@ -1516,6 +1535,22 @@ static void mcfrs_irqinit(struct mcf_serial *info)
imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
MCFINTC_IMRL); MCFINTC_IMRL);
*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
#if defined(CONFIG_M527x)
{
/*
* External Pin Mask Setting & Enable External Pin for Interface
* mrcbis@aliceposta.it
*/
unsigned short *serpin_enable_mask;
serpin_enable_mask = (MCF_IPSBAR + MCF_GPIO_PAR_UART);
if (info->line == 0)
*serpin_enable_mask |= UART0_ENABLE_MASK;
else if (info->line == 1)
*serpin_enable_mask |= UART1_ENABLE_MASK;
else if (info->line == 2)
*serpin_enable_mask |= UART2_ENABLE_MASK;
}
#endif
#elif defined(CONFIG_M520x) #elif defined(CONFIG_M520x)
volatile unsigned char *icrp, *uartp; volatile unsigned char *icrp, *uartp;
volatile unsigned long *imrp; volatile unsigned long *imrp;
...@@ -1713,7 +1748,7 @@ mcfrs_init(void) ...@@ -1713,7 +1748,7 @@ mcfrs_init(void)
/* Initialize the tty_driver structure */ /* Initialize the tty_driver structure */
mcfrs_serial_driver->owner = THIS_MODULE; mcfrs_serial_driver->owner = THIS_MODULE;
mcfrs_serial_driver->name = "ttyS"; mcfrs_serial_driver->name = "ttyS";
mcfrs_serial_driver->driver_name = "serial"; mcfrs_serial_driver->driver_name = "mcfserial";
mcfrs_serial_driver->major = TTY_MAJOR; mcfrs_serial_driver->major = TTY_MAJOR;
mcfrs_serial_driver->minor_start = 64; mcfrs_serial_driver->minor_start = 64;
mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
...@@ -1797,10 +1832,23 @@ void mcfrs_init_console(void) ...@@ -1797,10 +1832,23 @@ void mcfrs_init_console(void)
uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
#ifdef CONFIG_M5272
{
/*
* For the MCF5272, also compute the baudrate fraction.
*/
int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
fraction *= 16;
fraction /= (32 * mcfrs_console_baud);
uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
}
#else
clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
#endif
uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册