diff --git a/arch/arm64/boot/dts/overlays b/arch/arm64/boot/dts/overlays new file mode 120000 index 0000000000000000000000000000000000000000..ded08646b6f66cdf734f8bf9c1be3a2e3a7103d7 --- /dev/null +++ b/arch/arm64/boot/dts/overlays @@ -0,0 +1 @@ +../../../arm/boot/dts/overlays \ No newline at end of file diff --git a/arch/arm64/boot/dts/overlays/Makefile b/arch/arm64/boot/dts/overlays/Makefile deleted file mode 100644 index 85d8249a2f20123fb7741dced3adb9a4ac2287f9..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -# Overlays for the Raspberry Pi platform - -dtbo-$(CONFIG_ARCH_BCM2835) += \ - act-led.dtbo \ - adau1977-adc.dtbo \ - adau7002-simple.dtbo \ - ads1015.dtbo \ - ads1115.dtbo \ - ads7846.dtbo \ - adv7282m.dtbo \ - adv728x-m.dtbo \ - akkordion-iqdacplus.dtbo \ - allo-boss-dac-pcm512x-audio.dtbo \ - allo-digione.dtbo \ - allo-katana-dac-audio.dtbo \ - allo-piano-dac-pcm512x-audio.dtbo \ - allo-piano-dac-plus-pcm512x-audio.dtbo \ - anyspi.dtbo \ - apds9960.dtbo \ - applepi-dac.dtbo \ - at86rf233.dtbo \ - audioinjector-addons.dtbo \ - audioinjector-ultra.dtbo \ - audioinjector-wm8731-audio.dtbo \ - audiosense-pi.dtbo \ - audremap.dtbo \ - balena-fin.dtbo \ - bmp085_i2c-sensor.dtbo \ - dht11.dtbo \ - dionaudio-loco.dtbo \ - dionaudio-loco-v2.dtbo \ - disable-bt.dtbo \ - disable-wifi.dtbo \ - dpi18.dtbo \ - dpi24.dtbo \ - draws.dtbo \ - dwc-otg.dtbo \ - dwc2.dtbo \ - enc28j60.dtbo \ - enc28j60-spi2.dtbo \ - exc3000.dtbo \ - fe-pi-audio.dtbo \ - goodix.dtbo \ - googlevoicehat-soundcard.dtbo \ - gpio-fan.dtbo \ - gpio-ir.dtbo \ - gpio-ir-tx.dtbo \ - gpio-key.dtbo \ - gpio-no-bank0-irq.dtbo \ - gpio-no-irq.dtbo \ - gpio-poweroff.dtbo \ - gpio-shutdown.dtbo \ - hd44780-lcd.dtbo \ - hdmi-backlight-hwhack-gpio.dtbo \ - hifiberry-amp.dtbo \ - hifiberry-dac.dtbo \ - hifiberry-dacplus.dtbo \ - hifiberry-dacplusadc.dtbo \ - hifiberry-dacplusadcpro.dtbo \ - hifiberry-dacplusdsp.dtbo \ - hifiberry-dacplushd.dtbo \ - hifiberry-digi.dtbo \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ - hy28b.dtbo \ - hy28b-2017.dtbo \ - i-sabre-q2m.dtbo \ - i2c-bcm2708.dtbo \ - i2c-gpio.dtbo \ - i2c-mux.dtbo \ - i2c-pwm-pca9685a.dtbo \ - i2c-rtc.dtbo \ - i2c-rtc-gpio.dtbo \ - i2c-sensor.dtbo \ - i2c0.dtbo \ - i2c0-bcm2708.dtbo \ - i2c1.dtbo \ - i2c1-bcm2708.dtbo \ - i2c3.dtbo \ - i2c4.dtbo \ - i2c5.dtbo \ - i2c6.dtbo \ - i2s-gpio28-31.dtbo \ - ilitek251x.dtbo \ - imx219.dtbo \ - iqaudio-codec.dtbo \ - iqaudio-dac.dtbo \ - iqaudio-dacplus.dtbo \ - iqaudio-digi-wm8804-audio.dtbo \ - irs1125.dtbo \ - jedec-spi-nor.dtbo \ - justboom-both.dtbo \ - justboom-dac.dtbo \ - justboom-digi.dtbo \ - ltc294x.dtbo \ - max98357a.dtbo \ - mbed-dac.dtbo \ - mcp23017.dtbo \ - mcp23s17.dtbo \ - mcp2515-can0.dtbo \ - mcp2515-can1.dtbo \ - mcp3008.dtbo \ - mcp3202.dtbo \ - mcp342x.dtbo \ - media-center.dtbo \ - merus-amp.dtbo \ - midi-uart0.dtbo \ - midi-uart1.dtbo \ - miniuart-bt.dtbo \ - mmc.dtbo \ - mpu6050.dtbo \ - mz61581.dtbo \ - ov5647.dtbo \ - papirus.dtbo \ - pi3-act-led.dtbo \ - pi3-disable-bt.dtbo \ - pi3-disable-wifi.dtbo \ - pi3-miniuart-bt.dtbo \ - pibell.dtbo \ - piglow.dtbo \ - piscreen.dtbo \ - piscreen2r.dtbo \ - pisound.dtbo \ - pitft22.dtbo \ - pitft28-capacitive.dtbo \ - pitft28-resistive.dtbo \ - pitft35-resistive.dtbo \ - pps-gpio.dtbo \ - pwm.dtbo \ - pwm-2chan.dtbo \ - pwm-ir-tx.dtbo \ - qca7000.dtbo \ - rotary-encoder.dtbo \ - rpi-backlight.dtbo \ - rpi-cirrus-wm5102.dtbo \ - rpi-dac.dtbo \ - rpi-display.dtbo \ - rpi-ft5406.dtbo \ - rpi-poe.dtbo \ - rpi-proto.dtbo \ - rpi-sense.dtbo \ - rpi-tv.dtbo \ - rra-digidac1-wm8741-audio.dtbo \ - sc16is750-i2c.dtbo \ - sc16is752-i2c.dtbo \ - sc16is752-spi1.dtbo \ - sdhost.dtbo \ - sdio.dtbo \ - sdtweak.dtbo \ - sh1106-spi.dtbo \ - smi.dtbo \ - smi-dev.dtbo \ - smi-nand.dtbo \ - spi-gpio35-39.dtbo \ - spi-gpio40-45.dtbo \ - spi-rtc.dtbo \ - spi0-cs.dtbo \ - spi0-hw-cs.dtbo \ - spi1-1cs.dtbo \ - spi1-2cs.dtbo \ - spi1-3cs.dtbo \ - spi2-1cs.dtbo \ - spi2-2cs.dtbo \ - spi2-3cs.dtbo \ - spi3-1cs.dtbo \ - spi3-2cs.dtbo \ - spi4-1cs.dtbo \ - spi4-2cs.dtbo \ - spi5-1cs.dtbo \ - spi5-2cs.dtbo \ - spi6-1cs.dtbo \ - spi6-2cs.dtbo \ - ssd1306.dtbo \ - ssd1306-spi.dtbo \ - ssd1351-spi.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ - tc358743.dtbo \ - tc358743-audio.dtbo \ - tinylcd35.dtbo \ - tpm-slb9670.dtbo \ - uart0.dtbo \ - uart1.dtbo \ - uart2.dtbo \ - uart3.dtbo \ - uart4.dtbo \ - uart5.dtbo \ - udrc.dtbo \ - upstream.dtbo \ - vc4-fkms-v3d.dtbo \ - vc4-kms-kippah-7inch.dtbo \ - vc4-kms-v3d.dtbo \ - vga666.dtbo \ - w1-gpio.dtbo \ - w1-gpio-pullup.dtbo \ - w5500.dtbo \ - wittypi.dtbo - -targets += dtbs dtbs_install -targets += $(dtbo-y) - -always := $(dtbo-y) -clean-files := *.dtbo diff --git a/arch/arm64/boot/dts/overlays/README b/arch/arm64/boot/dts/overlays/README deleted file mode 100644 index 62ad35f78badaf5076381afa341f1d582d1ff6cf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/README +++ /dev/null @@ -1,2740 +0,0 @@ -Introduction -============ - -This directory contains Device Tree overlays. Device Tree makes it possible -to support many hardware configurations with a single kernel and without the -need to explicitly load or blacklist kernel modules. Note that this isn't a -"pure" Device Tree configuration (c.f. MACH_BCM2835) - some on-board devices -are still configured by the board support code, but the intention is to -eventually reach that goal. - -On Raspberry Pi, Device Tree usage is controlled from /boot/config.txt. By -default, the Raspberry Pi kernel boots with device tree enabled. You can -completely disable DT usage (for now) by adding: - - device_tree= - -to your config.txt, which should cause your Pi to revert to the old way of -doing things after a reboot. - -In /boot you will find a .dtb for each base platform. This describes the -hardware that is part of the Raspberry Pi board. The loader (start.elf and its -siblings) selects the .dtb file appropriate for the platform by name, and reads -it into memory. At this point, all of the optional interfaces (i2c, i2s, spi) -are disabled, but they can be enabled using Device Tree parameters: - - dtparam=i2c=on,i2s=on,spi=on - -However, this shouldn't be necessary in many use cases because loading an -overlay that requires one of those interfaces will cause it to be enabled -automatically, and it is advisable to only enable interfaces if they are -needed. - -Configuring additional, optional hardware is done using Device Tree overlays -(see below). - -GPIO numbering uses the hardware pin numbering scheme (aka BCM scheme) and -not the physical pin numbers. - -raspi-config -============ - -The Advanced Options section of the raspi-config utility can enable and disable -Device Tree use, as well as toggling the I2C and SPI interfaces. Note that it -is possible to both enable an interface and blacklist the driver, if for some -reason you should want to defer the loading. - -Modules -======= - -As well as describing the hardware, Device Tree also gives enough information -to allow suitable driver modules to be located and loaded, with the corollary -that unneeded modules are not loaded. As a result it should be possible to -remove lines from /etc/modules, and /etc/modprobe.d/raspi-blacklist.conf can -have its contents deleted (or commented out). - -Using Overlays -============== - -Overlays are loaded using the "dtoverlay" config.txt setting. As an example, -consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded -by writing a magic string comprising a device identifier and an I2C address to -a special file in /sys/class/i2c-adapter, having first loaded the driver for -the I2C interface and the RTC device - something like this: - - modprobe i2c-bcm2835 - modprobe rtc-ds1307 - echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device - -With DT enabled, this becomes a line in config.txt: - - dtoverlay=i2c-rtc,ds1307 - -This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node" -describing the DS1307 I2C device to be added to the Device Tree for the Pi. By -default it usees address 0x68, but this can be modified with an additional DT -parameter: - - dtoverlay=i2c-rtc,ds1307,addr=0x68 - -Parameters usually have default values, although certain parameters are -mandatory. See the list of overlays below for a description of the parameters -and their defaults. - -The Overlay and Parameter Reference -=================================== - -N.B. When editing this file, please preserve the indentation levels to make it -simple to parse programmatically. NO HARD TABS. - - -Name: -Info: Configures the base Raspberry Pi hardware -Load: -Params: - audio Set to "on" to enable the onboard ALSA audio - interface (default "off") - - axiperf Set to "on" to enable the AXI bus performance - monitors. - See /sys/kernel/debug/raspberrypi_axi_monitor - for the results. - - eee Enable Energy Efficient Ethernet support for - compatible devices (default "on"). See also - "tx_lpi_timer". Pi3B+ only. - - eth_downshift_after Set the number of auto-negotiation failures - after which the 1000Mbps modes are disabled. - Legal values are 2, 3, 4, 5 and 0, where - 0 means never downshift (default 2). Pi3B+ only. - - eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), - green on Pi4 (default "0"). - The legal values are: - - Pi3B+ - - 0=link/activity 1=link1000/activity - 2=link100/activity 3=link10/activity - 4=link100/1000/activity 5=link10/1000/activity - 6=link10/100/activity 14=off 15=on - - Pi4 - - 0=Speed/Activity 1=Speed - 2=Flash activity 3=FDX - 4=Off 5=On - 6=Alt 7=Speed/Flash - 8=Link 9=Activity - - eth_led1 Set mode of LED1 - green on Pi3B (default "6"), - amber on Pi4 (default "8"). See eth_led0 for - legal values. - - eth_max_speed Set the maximum speed a link is allowed - to negotiate. Legal values are 10, 100 and - 1000 (default 1000). Pi3B+ only. - - i2c_arm Set to "on" to enable the ARM's i2c interface - (default "off") - - i2c_vc Set to "on" to enable the i2c interface - usually reserved for the VideoCore processor - (default "off") - - i2c An alias for i2c_arm - - i2c_arm_baudrate Set the baudrate of the ARM's i2c interface - (default "100000") - - i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface - (default "100000") - - i2c_baudrate An alias for i2c_arm_baudrate - - i2s Set to "on" to enable the i2s interface - (default "off") - - spi Set to "on" to enable the spi interfaces - (default "off") - - random Set to "on" to enable the hardware random - number generator (default "on") - - sd_overclock Clock (in MHz) to use when the MMC framework - requests 50MHz - - sd_poll_once Looks for a card once after booting. Useful - for network booting scenarios to avoid the - overhead of continuous polling. N.B. Using - this option restricts the system to using a - single card per boot (or none at all). - (default off) - - sd_force_pio Disable DMA support for SD driver (default off) - - sd_pio_limit Number of blocks above which to use DMA for - SD card (default 1) - - sd_debug Enable debug output from SD driver (default off) - - sdio_overclock Clock (in MHz) to use when the MMC framework - requests 50MHz for the SDIO/WiFi interface. - - tx_lpi_timer Set the delay in microseconds between going idle - and entering the low power state (default 600). - Requires EEE to be enabled - see "eee". - - uart0 Set to "off" to disable uart0 (default "on") - - uart1 Set to "on" or "off" to enable or disable uart1 - (default varies) - - watchdog Set to "on" to enable the hardware watchdog - (default "off") - - act_led_trigger Choose which activity the LED tracks. - Use "heartbeat" for a nice load indicator. - (default "mmc") - - act_led_activelow Set to "on" to invert the sense of the LED - (default "off") - N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led - overlay. - - act_led_gpio Set which GPIO to use for the activity LED - (in case you want to connect it to an external - device) - (default "16" on a non-Plus board, "47" on a - Plus or Pi 2) - N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led - overlay. - - pwr_led_trigger - pwr_led_activelow - pwr_led_gpio - As for act_led_*, but using the PWR LED. - Not available on Model A/B boards. - - N.B. It is recommended to only enable those interfaces that are needed. - Leaving all interfaces enabled can lead to unwanted behaviour (i2c_vc - interfering with Pi Camera, I2S and SPI hogging GPIO pins, etc.) - Note also that i2c, i2c_arm and i2c_vc are aliases for the physical - interfaces i2c0 and i2c1. Use of the numeric variants is still possible - but deprecated because the ARM/VC assignments differ between board - revisions. The same board-specific mapping applies to i2c_baudrate, - and the other i2c baudrate parameters. - - -Name: act-led -Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can - only be accessed from the VPU. There is a special driver for this with a - separate DT node, which has the unfortunate consequence of breaking the - act_led_gpio and act_led_activelow dtparams. - This overlay changes the GPIO controller back to the standard one and - restores the dtparams. -Load: dtoverlay=act-led,= -Params: activelow Set to "on" to invert the sense of the LED - (default "off") - - gpio Set which GPIO to use for the activity LED - (in case you want to connect it to an external - device) - REQUIRED - - -Name: adau1977-adc -Info: Overlay for activation of ADAU1977 ADC codec over I2C for control - and I2S for data. -Load: dtoverlay=adau1977-adc -Params: - - -Name: adau7002-simple -Info: Overlay for the activation of ADAU7002 stereo PDM to I2S converter. -Load: dtoverlay=adau7002-simple,= -Params: card-name Override the default, "adau7002", card name. - - -Name: ads1015 -Info: Overlay for activation of Texas Instruments ADS1015 ADC over I2C -Load: dtoverlay=ads1015,= -Params: addr I2C bus address of device. Set based on how the - addr pin is wired. (default=0x48 assumes addr - is pulled to GND) - cha_enable Enable virtual channel a. (default=true) - cha_cfg Set the configuration for virtual channel a. - (default=4 configures this channel for the - voltage at A0 with respect to GND) - cha_datarate Set the datarate (samples/sec) for this channel. - (default=4 sets 1600 sps) - cha_gain Set the gain of the Programmable Gain - Amplifier for this channel. (default=2 sets the - full scale of the channel to 2.048 Volts) - - Channel (ch) parameters can be set for each enabled channel. - A maximum of 4 channels can be enabled (letters a thru d). - For more information refer to the device datasheet at: - http://www.ti.com/lit/ds/symlink/ads1015.pdf - - -Name: ads1115 -Info: Texas Instruments ADS1115 ADC -Load: dtoverlay=ads1115,[=] -Params: addr I2C bus address of device. Set based on how the - addr pin is wired. (default=0x48 assumes addr - is pulled to GND) - cha_enable Enable virtual channel a. - cha_cfg Set the configuration for virtual channel a. - (default=4 configures this channel for the - voltage at A0 with respect to GND) - cha_datarate Set the datarate (samples/sec) for this channel. - (default=7 sets 860 sps) - cha_gain Set the gain of the Programmable Gain - Amplifier for this channel. (Default 1 sets the - full scale of the channel to 4.096 Volts) - - Channel parameters can be set for each enabled channel. - A maximum of 4 channels can be enabled (letters a thru d). - For more information refer to the device datasheet at: - http://www.ti.com/lit/ds/symlink/ads1115.pdf - - -Name: ads7846 -Info: ADS7846 Touch controller -Load: dtoverlay=ads7846,= -Params: cs SPI bus Chip Select (default 1) - speed SPI bus speed (default 2MHz, max 3.25MHz) - penirq GPIO used for PENIRQ. REQUIRED - penirq_pull Set GPIO pull (default 0=none, 2=pullup) - swapxy Swap x and y axis - xmin Minimum value on the X axis (default 0) - ymin Minimum value on the Y axis (default 0) - xmax Maximum value on the X axis (default 4095) - ymax Maximum value on the Y axis (default 4095) - pmin Minimum reported pressure value (default 0) - pmax Maximum reported pressure value (default 65535) - xohms Touchpanel sensitivity (X-plate resistance) - (default 400) - - penirq is required and usually xohms (60-100) has to be set as well. - Apart from that, pmax (255) and swapxy are also common. - The rest of the calibration can be done with xinput-calibrator. - See: github.com/notro/fbtft/wiki/FBTFT-on-Raspian - Device Tree binding document: - www.kernel.org/doc/Documentation/devicetree/bindings/input/ads7846.txt - - -Name: adv7282m -Info: Analog Devices ADV7282M analogue video to CSI2 bridge. - Uses Unicam1, which is the standard camera connector on most Pi - variants. -Load: dtoverlay=adv7282m,= -Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - addr Overrides the I2C address (default 0x21) - - -Name: adv728x-m -Info: Analog Devices ADV728[0|1|2]-M analogue video to CSI2 bridges. - This is a wrapper for adv7282m, and defaults to ADV7282M. -Load: dtoverlay=adv728x-m,= -Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - addr Overrides the I2C address (default 0x21) - adv7280m Select ADV7280-M. - adv7281m Select ADV7281-M. - adv7281ma Select ADV7281-MA. - - -Name: akkordion-iqdacplus -Info: Configures the Digital Dreamtime Akkordion Music Player (based on the - OEM IQAudIO DAC+ or DAC Zero module). -Load: dtoverlay=akkordion-iqdacplus,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - dtoverlay=akkordion-iqdacplus,24db_digital_gain - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: allo-boss-dac-pcm512x-audio -Info: Configures the Allo Boss DAC audio cards. -Load: dtoverlay=allo-boss-dac-pcm512x-audio, -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=allo-boss-dac-pcm512x-audio, - 24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - slave Force Boss DAC into slave mode, using Pi a - master for bit clock and frame clock. Enable - with "dtoverlay=allo-boss-dac-pcm512x-audio, - slave" - - -Name: allo-digione -Info: Configures the Allo Digione audio card -Load: dtoverlay=allo-digione -Params: - - -Name: allo-katana-dac-audio -Info: Configures the Allo Katana DAC audio card -Load: dtoverlay=allo-katana-dac-audio -Params: - - -Name: allo-piano-dac-pcm512x-audio -Info: Configures the Allo Piano DAC (2.0/2.1) audio cards. - (NB. This initial support is for 2.0 channel audio ONLY! ie. stereo. - The subwoofer outputs on the Piano 2.1 are not currently supported!) -Load: dtoverlay=allo-piano-dac-pcm512x-audio, -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: allo-piano-dac-plus-pcm512x-audio -Info: Configures the Allo Piano DAC (2.1) audio cards. -Load: dtoverlay=allo-piano-dac-plus-pcm512x-audio, -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - glb_mclk This option is only with Kali board. If enabled, - MCLK for Kali is used and PLL is disabled for - better voice quality. (default Off) - - -Name: anyspi -Info: Universal device tree overlay for SPI devices - - Just specify the SPI address and device name ("compatible" property). - This overlay lacks any device-specific parameter support! - - For devices on spi1 or spi2, the interfaces should be enabled - with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. - - Examples: - 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: - dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 - 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: - dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" -Load: dtoverlay=anyspi,= -Params: spi- Configure device at spi, cs - (boolean, required) - dev Set device name to search compatible module - (string, required) - speed Set SPI clock frequency in Hz - (integer, optional, default 500000) - - -Name: apds9960 -Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and - gesture sensor -Load: dtoverlay=apds9960,= -Params: gpiopin GPIO used for INT (default 4) - noints Disable the interrupt GPIO line. - - -Name: applepi-dac -Info: Configures the Orchard Audio ApplePi-DAC audio card -Load: dtoverlay=applepi-dac -Params: - - -Name: at86rf233 -Info: Configures the Atmel AT86RF233 802.15.4 low-power WPAN transceiver, - connected to spi0.0 -Load: dtoverlay=at86rf233,= -Params: interrupt GPIO used for INT (default 23) - reset GPIO used for Reset (default 24) - sleep GPIO used for Sleep (default 25) - speed SPI bus speed in Hz (default 3000000) - trim Fine tuning of the internal capacitance - arrays (0=+0pF, 15=+4.5pF, default 15) - - -Name: audioinjector-addons -Info: Configures the audioinjector.net audio add on soundcards -Load: dtoverlay=audioinjector-addons,= -Params: non-stop-clocks Keeps the clocks running even when the stream - is paused or stopped (default off) - - -Name: audioinjector-ultra -Info: Configures the audioinjector.net ultra soundcard -Load: dtoverlay=audioinjector-ultra -Params: - - -Name: audioinjector-wm8731-audio -Info: Configures the audioinjector.net audio add on soundcard -Load: dtoverlay=audioinjector-wm8731-audio -Params: - - -Name: audiosense-pi -Info: Configures the audiosense-pi add on soundcard - For more information refer to - https://gitlab.com/kakar0t/audiosense-pi -Load: dtoverlay=audiosense-pi -Params: - - -Name: audremap -Info: Switches PWM sound output to GPIOs on the 40-pin header -Load: dtoverlay=audremap,= -Params: swap_lr Reverse the channel allocation, which will also - swap the audio jack outputs (default off) - enable_jack Don't switch off the audio jack output - (default off) - pins_12_13 Select GPIOs 12 & 13 (default) - pins_18_19 Select GPIOs 18 & 19 - - -Name: balena-fin -Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the - balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite. -Load: dtoverlay=balena-fin -Params: - - -Name: bmp085_i2c-sensor -Info: This overlay is now deprecated - see i2c-sensor -Load: - - -Name: dht11 -Info: Overlay for the DHT11/DHT21/DHT22 humidity/temperature sensors - Also sometimes found with the part number(s) AM230x. -Load: dtoverlay=dht11,= -Params: gpiopin GPIO connected to the sensor's DATA output. - (default 4) - - -Name: dionaudio-loco -Info: Configures the Dion Audio LOCO DAC-AMP -Load: dtoverlay=dionaudio-loco -Params: - - -Name: dionaudio-loco-v2 -Info: Configures the Dion Audio LOCO-V2 DAC-AMP -Load: dtoverlay=dionaudio-loco-v2,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=hifiberry-dacplus,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: disable-bt -Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring - UART0/ttyAMA0 over GPIOs 14 & 15. - N.B. To disable the systemd service that initialises the modem so it - doesn't use the UART, use 'sudo systemctl disable hciuart'. -Load: dtoverlay=disable-bt -Params: - - -Name: disable-wifi -Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W. -Load: dtoverlay=disable-wifi -Params: - - -Name: dpi18 -Info: Overlay for a generic 18-bit DPI display - This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output - 2-3 seconds after the kernel has started. -Load: dtoverlay=dpi18 -Params: - - -Name: dpi24 -Info: Overlay for a generic 24-bit DPI display - This uses GPIOs 0-27 (so no I2C, uart etc.), and activates the output - 2-3 seconds after the kernel has started. -Load: dtoverlay=dpi24 -Params: - - -Name: draws -Info: Configures the NW Digital Radio DRAWS Hat - - The board includes an ADC to measure various board values and also - provides two analog user inputs on the expansion header. The ADC - can be configured for various sample rates and gain values to adjust - the input range. Tables describing the two parameters follow. - - ADC Gain Values: - 0 = +/- 6.144V - 1 = +/- 4.096V - 2 = +/- 2.048V - 3 = +/- 1.024V - 4 = +/- 0.512V - 5 = +/- 0.256V - 6 = +/- 0.256V - 7 = +/- 0.256V - - ADC Datarate Values: - 0 = 128sps - 1 = 250sps - 2 = 490sps - 3 = 920sps - 4 = 1600sps (default) - 5 = 2400sps - 6 = 3300sps - 7 = 3300sps -Load: dtoverlay=draws,= -Params: draws_adc_ch4_gain Sets the full scale resolution of the ADCs - input voltage sensor (default 1) - - draws_adc_ch4_datarate Sets the datarate of the ADCs input voltage - sensor - - draws_adc_ch5_gain Sets the full scale resolution of the ADCs - 5V rail voltage sensor (default 1) - - draws_adc_ch5_datarate Sets the datarate of the ADCs 4V rail voltage - sensor - - draws_adc_ch6_gain Sets the full scale resolution of the ADCs - AIN2 input (default 2) - - draws_adc_ch6_datarate Sets the datarate of the ADCs AIN2 input - - draws_adc_ch7_gain Sets the full scale resolution of the ADCs - AIN3 input (default 2) - - draws_adc_ch7_datarate Sets the datarate of the ADCs AIN3 input - - alsaname Name of the ALSA audio device (default "draws") - - -Name: dwc-otg -Info: Selects the dwc_otg USB controller driver which has fiq support. This - is the default on all except the Pi Zero which defaults to dwc2. -Load: dtoverlay=dwc-otg -Params: - - -Name: dwc2 -Info: Selects the dwc2 USB controller driver -Load: dtoverlay=dwc2,= -Params: dr_mode Dual role mode: "host", "peripheral" or "otg" - - g-rx-fifo-size Size of rx fifo size in gadget mode - - g-np-tx-fifo-size Size of non-periodic tx fifo size in gadget - mode - - -[ The ds1307-rtc overlay has been deleted. See i2c-rtc. ] - - -Name: enc28j60 -Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI0 -Load: dtoverlay=enc28j60,= -Params: int_pin GPIO used for INT (default 25) - - speed SPI bus speed (default 12000000) - - -Name: enc28j60-spi2 -Info: Overlay for the Microchip ENC28J60 Ethernet Controller on SPI2 -Load: dtoverlay=enc28j60-spi2,= -Params: int_pin GPIO used for INT (default 39) - - speed SPI bus speed (default 12000000) - - -Name: exc3000 -Info: Enables I2C connected EETI EXC3000 multiple touch controller using - GPIO 4 (pin 7 on GPIO header) for interrupt. -Load: dtoverlay=exc3000,= -Params: interrupt GPIO used for interrupt (default 4) - sizex Touchscreen size x (default 4096) - sizey Touchscreen size y (default 4096) - invx Touchscreen inverted x axis - invy Touchscreen inverted y axis - swapxy Touchscreen swapped x y axis - - -Name: fe-pi-audio -Info: Configures the Fe-Pi Audio Sound Card -Load: dtoverlay=fe-pi-audio -Params: - - -Name: goodix -Info: Enables I2C connected Goodix gt9271 multiple touch controller using - GPIOs 4 and 17 (pins 7 and 11 on GPIO header) for interrupt and reset. -Load: dtoverlay=goodix,= -Params: interrupt GPIO used for interrupt (default 4) - reset GPIO used for reset (default 17) - - -Name: googlevoicehat-soundcard -Info: Configures the Google voiceHAT soundcard -Load: dtoverlay=googlevoicehat-soundcard -Params: - - -Name: gpio-fan -Info: Configure a GPIO pin to control a cooling fan. -Load: dtoverlay=gpio-fan,= -Params: gpiopin GPIO used to control the fan (default 12) - temp Temperature at which the fan switches on, in - millicelcius (default 55000) - - -Name: gpio-ir -Info: Use GPIO pin as rc-core style infrared receiver input. The rc-core- - based gpio_ir_recv driver maps received keys directly to a - /dev/input/event* device, all decoding is done by the kernel - LIRC is - not required! The key mapping and other decoding parameters can be - configured by "ir-keytable" tool. -Load: dtoverlay=gpio-ir,= -Params: gpio_pin Input pin number. Default is 18. - - gpio_pull Desired pull-up/down state (off, down, up) - Default is "up". - - invert "1" = invert the input (active-low signalling). - "0" = non-inverted input (active-high - signalling). Default is "1". - - rc-map-name Default rc keymap (can also be changed by - ir-keytable), defaults to "rc-rc6-mce" - - -Name: gpio-ir-tx -Info: Use GPIO pin as bit-banged infrared transmitter output. - This is an alternative to "pwm-ir-tx". gpio-ir-tx doesn't require - a PWM so it can be used together with onboard analog audio. -Load: dtoverlay=gpio-ir-tx,= -Params: gpio_pin Output GPIO (default 18) - - invert "1" = invert the output (make it active-low). - Default is "0" (active-high). - - -Name: gpio-key -Info: This is a generic overlay for activating GPIO keypresses using - the gpio-keys library and this dtoverlay. Multiple keys can be - set up using multiple calls to the overlay for configuring - additional buttons or joysticks. You can see available keycodes - at https://github.com/torvalds/linux/blob/v4.12/include/uapi/ - linux/input-event-codes.h#L64 -Load: dtoverlay=gpio-key,= -Params: gpio GPIO pin to trigger on (default 3) - active_low When this is 1 (active low), a falling - edge generates a key down event and a - rising edge generates a key up event. - When this is 0 (active high), this is - reversed. The default is 1 (active low) - gpio_pull Desired pull-up/down state (off, down, up) - Default is "up". Note that the default pin - (GPIO3) has an external pullup - label Set a label for the key - keycode Set the key code for the button - - -Name: gpio-no-bank0-irq -Info: Use this overlay to disable GPIO interrupts for GPIOs in bank 0 (0-27), - which can be useful for UIO drivers. - N.B. Using this overlay will trigger a kernel WARN during booting, but - this can safely be ignored - the system should work as expected. -Load: dtoverlay=gpio-no-bank0-irq -Params: - - -Name: gpio-no-irq -Info: Use this overlay to disable all GPIO interrupts, which can be useful - for user-space GPIO edge detection systems. -Load: dtoverlay=gpio-no-irq -Params: - - -Name: gpio-poweroff -Info: Drives a GPIO high or low on poweroff (including halt). Enabling this - overlay will prevent the ability to boot by driving GPIO3 low. -Load: dtoverlay=gpio-poweroff,= -Params: gpiopin GPIO for signalling (default 26) - - active_low Set if the power control device requires a - high->low transition to trigger a power-down. - Note that this will require the support of a - custom dt-blob.bin to prevent a power-down - during the boot process, and that a reboot - will also cause the pin to go low. - input Set if the gpio pin should be configured as - an input. - export Set to export the configured pin to sysfs - timeout_ms Specify (in ms) how long the kernel waits for - power-down before issuing a WARN (default 3000). - - -Name: gpio-shutdown -Info: Initiates a shutdown when GPIO pin changes. The given GPIO pin - is configured as an input key that generates KEY_POWER events. - This event is handled by systemd-logind by initiating a - shutdown. Systemd versions older than 225 need an udev rule - enable listening to the input device: - - ACTION!="REMOVE", SUBSYSTEM=="input", KERNEL=="event*", \ - SUBSYSTEMS=="platform", DRIVERS=="gpio-keys", \ - ATTRS{keys}=="116", TAG+="power-switch" - - This overlay only handles shutdown. After shutdown, the system - can be powered up again by driving GPIO3 low. The default - configuration uses GPIO3 with a pullup, so if you connect a - button between GPIO3 and GND (pin 5 and 6 on the 40-pin header), - you get a shutdown and power-up button. -Load: dtoverlay=gpio-shutdown,= -Params: gpio_pin GPIO pin to trigger on (default 3) - - active_low When this is 1 (active low), a falling - edge generates a key down event and a - rising edge generates a key up event. - When this is 0 (active high), this is - reversed. The default is 1 (active low). - - gpio_pull Desired pull-up/down state (off, down, up) - Default is "up". - - Note that the default pin (GPIO3) has an - external pullup. - - debounce Specify the debounce interval in milliseconds - (default 100) - - -Name: hd44780-lcd -Info: Configures an HD44780 compatible LCD display. Uses 4 gpio pins for - data, 2 gpio pins for enable and register select and 1 optional pin - for enabling/disabling the backlight display. -Load: dtoverlay=hd44780-lcd,= -Params: pin_d4 GPIO pin for data pin D4 (default 6) - - pin_d5 GPIO pin for data pin D5 (default 13) - - pin_d6 GPIO pin for data pin D6 (default 19) - - pin_d7 GPIO pin for data pin D7 (default 26) - - pin_en GPIO pin for "Enable" (default 21) - - pin_rs GPIO pin for "Register Select" (default 20) - - pin_bl Optional pin for enabling/disabling the - display backlight. (default disabled) - - display_height Height of the display in characters - - display_width Width of the display in characters - - -Name: hdmi-backlight-hwhack-gpio -Info: Devicetree overlay for GPIO based backlight on/off capability. - Use this if you have one of those HDMI displays whose backlight cannot - be controlled via DPMS over HDMI and plan to do a little soldering to - use an RPi gpio pin for on/off switching. See: - https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)#Backlight_Control -Load: dtoverlay=hdmi-backlight-hwhack-gpio,= -Params: gpio_pin GPIO pin used (default 17) - active_low Set this to 1 if the display backlight is - switched on when the wire goes low. - Leave the default (value 0) if the backlight - expects a high to switch it on. - - -Name: hifiberry-amp -Info: Configures the HifiBerry Amp and Amp+ audio cards -Load: dtoverlay=hifiberry-amp -Params: - - -Name: hifiberry-dac -Info: Configures the HifiBerry DAC audio card -Load: dtoverlay=hifiberry-dac -Params: - - -Name: hifiberry-dacplus -Info: Configures the HifiBerry DAC+ audio card -Load: dtoverlay=hifiberry-dacplus,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=hifiberry-dacplus,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - slave Force DAC+ Pro into slave mode, using Pi as - master for bit clock and frame clock. - leds_off If set to 'true' the onboard indicator LEDs - are switched off at all times. - - -Name: hifiberry-dacplusadc -Info: Configures the HifiBerry DAC+ADC audio card -Load: dtoverlay=hifiberry-dacplusadc,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=hifiberry-dacplus,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - slave Force DAC+ Pro into slave mode, using Pi as - master for bit clock and frame clock. - leds_off If set to 'true' the onboard indicator LEDs - are switched off at all times. - - -Name: hifiberry-dacplusadcpro -Info: Configures the HifiBerry DAC+ADC PRO audio card -Load: dtoverlay=hifiberry-dacplusadcpro,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=hifiberry-dacplusadcpro,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - slave Force DAC+ADC Pro into slave mode, using Pi as - master for bit clock and frame clock. - leds_off If set to 'true' the onboard indicator LEDs - are switched off at all times. - - -Name: hifiberry-dacplusdsp -Info: Configures the HifiBerry DAC+DSP audio card -Load: dtoverlay=hifiberry-dacplusdsp -Params: - - -Name: hifiberry-dacplushd -Info: Configures the HifiBerry DAC+ HD audio card -Load: dtoverlay=hifiberry-dacplushd -Params: - - -Name: hifiberry-digi -Info: Configures the HifiBerry Digi and Digi+ audio card -Load: dtoverlay=hifiberry-digi -Params: - - -Name: hifiberry-digi-pro -Info: Configures the HifiBerry Digi+ Pro audio card -Load: dtoverlay=hifiberry-digi-pro -Params: - - -Name: hy28a -Info: HY28A - 2.8" TFT LCD Display Module by HAOYU Electronics - Default values match Texy's display shield -Load: dtoverlay=hy28a,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - resetgpio GPIO used to reset controller - - ledgpio GPIO used to control backlight - - -Name: hy28b -Info: HY28B - 2.8" TFT LCD Display Module by HAOYU Electronics - Default values match Texy's display shield -Load: dtoverlay=hy28b,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - resetgpio GPIO used to reset controller - - ledgpio GPIO used to control backlight - - -Name: hy28b-2017 -Info: HY28B 2017 version - 2.8" TFT LCD Display Module by HAOYU Electronics - Default values match Texy's display shield -Load: dtoverlay=hy28b-2017,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - resetgpio GPIO used to reset controller - - ledgpio GPIO used to control backlight - - -Name: i-sabre-q2m -Info: Configures the Audiophonics I-SABRE Q2M DAC -Load: dtoverlay=i-sabre-q2m -Params: - - -Name: i2c-bcm2708 -Info: Fall back to the i2c_bcm2708 driver for the i2c_arm bus. -Load: dtoverlay=i2c-bcm2708 -Params: - - -Name: i2c-gpio -Info: Adds support for software i2c controller on gpio pins -Load: dtoverlay=i2c-gpio,= -Params: i2c_gpio_sda GPIO used for I2C data (default "23") - - i2c_gpio_scl GPIO used for I2C clock (default "24") - - i2c_gpio_delay_us Clock delay in microseconds - (default "2" = ~100kHz) - - bus Set to a unique, non-zero value if wanting - multiple i2c-gpio busses. If set, will be used - as the preferred bus number (/dev/i2c-). If - not set, the default value is 0, but the bus - number will be dynamically assigned - probably - 3. - - -Name: i2c-mux -Info: Adds support for a number of I2C bus multiplexers on i2c_arm -Load: dtoverlay=i2c-mux,= -Params: pca9542 Select the NXP PCA9542 device - - pca9545 Select the NXP PCA9545 device - - pca9548 Select the NXP PCA9548 device - - addr Change I2C address of the device (default 0x70) - - -[ The i2c-mux-pca9548a overlay has been deleted. See i2c-mux. ] - - -Name: i2c-pwm-pca9685a -Info: Adds support for an NXP PCA9685A I2C PWM controller on i2c_arm -Load: dtoverlay=i2c-pwm-pca9685a,= -Params: addr I2C address of PCA9685A (default 0x40) - - -Name: i2c-rtc -Info: Adds support for a number of I2C Real Time Clock devices -Load: dtoverlay=i2c-rtc,= -Params: abx80x Select one of the ABx80x family: - AB0801, AB0803, AB0804, AB0805, - AB1801, AB1803, AB1804, AB1805 - - ds1307 Select the DS1307 device - - ds1339 Select the DS1339 device - - ds3231 Select the DS3231 device - - m41t62 Select the M41T62 device - - mcp7940x Select the MCP7940x device - - mcp7941x Select the MCP7941x device - - pcf2127 Select the PCF2127 device - - pcf2129 Select the PCF2129 device - - pcf8523 Select the PCF8523 device - - pcf85363 Select the PCF85363 device - - pcf8563 Select the PCF8563 device - - rv3028 Select the Micro Crystal RV3028 device - - addr Sets the address for the RTC. Note that the - device must be configured to use the specified - address. - - trickle-diode-type Diode type for trickle charge - "standard" or - "schottky" (ABx80x only) - - trickle-resistor-ohms Resistor value for trickle charge (DS1339, - ABx80x, RV3028) - - wakeup-source Specify that the RTC can be used as a wakeup - source - - backup-switchover-mode Backup power supply switch mode. Must be 0 for - off or 1 for Vdd < VBackup (RV3028 only) - - -Name: i2c-rtc-gpio -Info: Adds support for a number of I2C Real Time Clock devices - using the software i2c controller -Load: dtoverlay=i2c-rtc-gpio,= -Params: abx80x Select one of the ABx80x family: - AB0801, AB0803, AB0804, AB0805, - AB1801, AB1803, AB1804, AB1805 - - ds1307 Select the DS1307 device - - ds1339 Select the DS1339 device - - ds3231 Select the DS3231 device - - m41t62 Select the M41T62 device - - mcp7940x Select the MCP7940x device - - mcp7941x Select the MCP7941x device - - pcf2127 Select the PCF2127 device - - pcf2129 Select the PCF2129 device - - pcf8523 Select the PCF8523 device - - pcf8563 Select the PCF8563 device - - rv3028 Select the Micro Crystal RV3028 device - - addr Sets the address for the RTC. Note that the - device must be configured to use the specified - address. - - trickle-diode-type Diode type for trickle charge - "standard" or - "schottky" (ABx80x only) - - trickle-resistor-ohms Resistor value for trickle charge (DS1339, - ABx80x, RV3028) - - wakeup-source Specify that the RTC can be used as a wakeup - source - - backup-switchover-mode Backup power supply switch mode. Must be 0 for - off or 1 for Vdd < VBackup (RV3028 only) - - i2c_gpio_sda GPIO used for I2C data (default "23") - - i2c_gpio_scl GPIO used for I2C clock (default "24") - - i2c_gpio_delay_us Clock delay in microseconds - (default "2" = ~100kHz) - - -Name: i2c-sensor -Info: Adds support for a number of I2C barometric pressure and temperature - sensors on i2c_arm -Load: dtoverlay=i2c-sensor,= -Params: addr Set the address for the BME280, BME680, BMP280, - DS1621, HDC100X, LM75, SHT3x or TMP102 - - bme280 Select the Bosch Sensortronic BME280 - Valid addresses 0x76-0x77, default 0x76 - - bme680 Select the Bosch Sensortronic BME680 - Valid addresses 0x76-0x77, default 0x76 - - bmp085 Select the Bosch Sensortronic BMP085 - - bmp180 Select the Bosch Sensortronic BMP180 - - bmp280 Select the Bosch Sensortronic BMP280 - Valid addresses 0x76-0x77, default 0x76 - - ds1621 Select the Dallas Semiconductors DS1621 temp - sensor. Valid addresses 0x48-0x4f, default 0x48 - - hdc100x Select the Texas Instruments HDC100x temp sensor - Valid addresses 0x40-0x43, default 0x40 - - htu21 Select the HTU21 temperature and humidity sensor - - lm75 Select the Maxim LM75 temperature sensor - Valid addresses 0x48-0x4f, default 0x4f - - lm75addr Deprecated - use addr parameter instead - - max17040 Select the Maxim Integrated MAX17040 battery - monitor - - sht3x Select the Sensiron SHT3x temperature and - humidity sensor. Valid addresses 0x44-0x45, - default 0x44 - - si7020 Select the Silicon Labs Si7013/20/21 humidity/ - temperature sensor - - tmp102 Select the Texas Instruments TMP102 temp sensor - Valid addresses 0x48-0x4b, default 0x48 - - tsl4531 Select the AMS TSL4531 digital ambient light - sensor - - veml6070 Select the Vishay VEML6070 ultraviolet light - sensor - - -Name: i2c0 -Info: Change i2c0 pin usage. Not all pin combinations are usable on all - platforms - platforms other then Compute Modules can only use this - to disable transaction combining. -Load: dtoverlay=i2c0,= -Params: pins_0_1 Use pins 0 and 1 (default) - pins_28_29 Use pins 28 and 29 - pins_44_45 Use pins 44 and 45 - pins_46_47 Use pins 46 and 47 - combine Allow transactions to be combined (default - "yes") - - -Name: i2c0-bcm2708 -Info: Deprecated, legacy version of i2c0, from which it inherits its - parameters, just adding the explicit individual pin specifiers. -Load: -Params: sda0_pin GPIO pin for SDA0 (deprecated - use pins_*) - scl0_pin GPIO pin for SCL0 (deprecated - use pins_*) - - -Name: i2c1 -Info: Change i2c1 pin usage. Not all pin combinations are usable on all - platforms - platforms other then Compute Modules can only use this - to disable transaction combining. -Load: dtoverlay=i2c1,= -Params: pins_2_3 Use pins 2 and 3 (default) - pins_44_45 Use pins 44 and 45 - combine Allow transactions to be combined (default - "yes") - - -Name: i2c1-bcm2708 -Info: Deprecated, legacy version of i2c1, from which it inherits its - parameters, just adding the explicit individual pin specifiers. -Load: -Params: sda1_pin GPIO pin for SDA1 (2 or 44 - default 2) - scl1_pin GPIO pin for SCL1 (3 or 45 - default 3) - pin_func Alternative pin function (4 (alt0), 6 (alt2) - - default 4) - - -Name: i2c3 -Info: Enable the i2c3 bus -Load: dtoverlay=i2c3, -Params: pins_2_3 Use GPIOs 2 and 3 - pins_4_5 Use GPIOs 4 and 5 (default) - baudrate Set the baudrate for the interface (default - "100000") - - -Name: i2c4 -Info: Enable the i2c4 bus -Load: dtoverlay=i2c4, -Params: pins_6_7 Use GPIOs 6 and 7 - pins_8_9 Use GPIOs 8 and 9 (default) - baudrate Set the baudrate for the interface (default - "100000") - - -Name: i2c5 -Info: Enable the i2c5 bus -Load: dtoverlay=i2c5, -Params: pins_10_11 Use GPIOs 10 and 11 - pins_12_13 Use GPIOs 12 and 13 (default) - baudrate Set the baudrate for the interface (default - "100000") - - -Name: i2c6 -Info: Enable the i2c6 bus -Load: dtoverlay=i2c6, -Params: pins_0_1 Use GPIOs 0 and 1 - pins_22_23 Use GPIOs 22 and 23 (default) - baudrate Set the baudrate for the interface (default - "100000") - - -Name: i2s-gpio28-31 -Info: move I2S function block to GPIO 28 to 31 -Load: dtoverlay=i2s-gpio28-31 -Params: - - -Name: ilitek251x -Info: Enables I2C connected Ilitek 251x multiple touch controller using - GPIO 4 (pin 7 on GPIO header) for interrupt. -Load: dtoverlay=ilitek251x,= -Params: interrupt GPIO used for interrupt (default 4) - sizex Touchscreen size x, horizontal resolution of - touchscreen (in pixels) - sizey Touchscreen size y, vertical resolution of - touchscreen (in pixels) - - -Name: imx219 -Info: Sony IMX219 camera module. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. -Load: dtoverlay=imx219,= -Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - - -Name: iqaudio-codec -Info: Configures the IQaudio Codec audio card -Load: dtoverlay=iqaudio-codec -Params: - - -Name: iqaudio-dac -Info: Configures the IQaudio DAC audio card -Load: dtoverlay=iqaudio-dac, -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=iqaudio-dac,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: iqaudio-dacplus -Info: Configures the IQaudio DAC+ audio card -Load: dtoverlay=iqaudio-dacplus,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=iqaudio-dacplus,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24db_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - auto_mute_amp If specified, unmute/mute the IQaudIO amp when - starting/stopping audio playback. - unmute_amp If specified, unmute the IQaudIO amp once when - the DAC driver module loads. - - -Name: iqaudio-digi-wm8804-audio -Info: Configures the IQAudIO Digi WM8804 audio card -Load: dtoverlay=iqaudio-digi-wm8804-audio,= -Params: card_name Override the default, "IQAudIODigi", card name. - dai_name Override the default, "IQAudIO Digi", dai name. - dai_stream_name Override the default, "IQAudIO Digi HiFi", - dai stream name. - - -Name: irs1125 -Info: Infineon irs1125 TOF camera module. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. -Load: dtoverlay=irs1125,= -Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - - -Name: jedec-spi-nor -Info: Adds support for JEDEC-compliant SPI NOR flash devices. (Note: The - "jedec,spi-nor" kernel driver was formerly known as "m25p80".) -Load: dtoverlay=jedec-spi-nor,= -Params: flash-spi- Enables flash device on SPI, CS#. - flash-fastr-spi- Enables flash device with fast read capability - on SPI, CS#. - - -Name: justboom-both -Info: Simultaneous usage of an justboom-dac and justboom-digi based - card -Load: dtoverlay=justboom-both,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=justboom-dac,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: justboom-dac -Info: Configures the JustBoom DAC HAT, Amp HAT, DAC Zero and Amp Zero audio - cards -Load: dtoverlay=justboom-dac,= -Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec - Digital volume control. Enable with - "dtoverlay=justboom-dac,24db_digital_gain" - (The default behaviour is that the Digital - volume control is limited to a maximum of - 0dB. ie. it can attenuate but not provide - gain. For most users, this will be desired - as it will prevent clipping. By appending - the 24dB_digital_gain parameter, the Digital - volume control will allow up to 24dB of - gain. If this parameter is enabled, it is the - responsibility of the user to ensure that - the Digital volume control is set to a value - that does not result in clipping/distortion!) - - -Name: justboom-digi -Info: Configures the JustBoom Digi HAT and Digi Zero audio cards -Load: dtoverlay=justboom-digi -Params: - - -Name: lirc-rpi -Info: This overlay has been deprecated and removed - see gpio-ir -Load: - - -Name: ltc294x -Info: Adds support for the ltc294x family of battery gauges -Load: dtoverlay=ltc294x,= -Params: ltc2941 Select the ltc2941 device - - ltc2942 Select the ltc2942 device - - ltc2943 Select the ltc2943 device - - ltc2944 Select the ltc2944 device - - resistor-sense The sense resistor value in milli-ohms. - Can be a 32-bit negative value when the battery - has been connected to the wrong end of the - resistor. - - prescaler-exponent Range and accuracy of the gauge. The value is - programmed into the chip only if it differs - from the current setting. - For LTC2941 only: - - Default value is 128 - - the exponent is in the range 0-7 (default 7) - See the datasheet for more information. - - -Name: max98357a -Info: Configures the Maxim MAX98357A I2S DAC -Load: dtoverlay=max98357a,= -Params: no-sdmode Driver does not manage the state of the DAC's - SD_MODE pin (i.e. chip is always on). - sdmode-pin integer, GPIO pin connected to the SD_MODE input - of the DAC (default GPIO4 if parameter omitted). - - -Name: mbed-dac -Info: Configures the mbed AudioCODEC (TLV320AIC23B) -Load: dtoverlay=mbed-dac -Params: - - -Name: mcp23017 -Info: Configures the MCP23017 I2C GPIO expander -Load: dtoverlay=mcp23017,= -Params: gpiopin Gpio pin connected to the INTA output of the - MCP23017 (default: 4) - - addr I2C address of the MCP23017 (default: 0x20) - - mcp23008 Configure an MCP23008 instead. - noints Disable the interrupt GPIO line. - - -Name: mcp23s17 -Info: Configures the MCP23S08/17 SPI GPIO expanders. - If devices are present on SPI1 or SPI2, those interfaces must be enabled - with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. - If interrupts are enabled for a device on a given CS# on a SPI bus, that - device must be the only one present on that SPI bus/CS#. -Load: dtoverlay=mcp23s17,= -Params: s08-spi--present 4-bit integer, bitmap indicating MCP23S08 - devices present on SPI, CS# - - s17-spi--present 8-bit integer, bitmap indicating MCP23S17 - devices present on SPI, CS# - - s08-spi--int-gpio integer, enables interrupts on a single - MCP23S08 device on SPI, CS#, specifies - the GPIO pin to which INT output of MCP23S08 - is connected. - - s17-spi--int-gpio integer, enables mirrored interrupts on a - single MCP23S17 device on SPI, CS#, - specifies the GPIO pin to which either INTA - or INTB output of MCP23S17 is connected. - - -Name: mcp2515-can0 -Info: Configures the MCP2515 CAN controller on spi0.0 -Load: dtoverlay=mcp2515-can0,= -Params: oscillator Clock frequency for the CAN controller (Hz) - - spimaxfrequency Maximum SPI frequence (Hz) - - interrupt GPIO for interrupt signal - - -Name: mcp2515-can1 -Info: Configures the MCP2515 CAN controller on spi0.1 -Load: dtoverlay=mcp2515-can1,= -Params: oscillator Clock frequency for the CAN controller (Hz) - - spimaxfrequency Maximum SPI frequence (Hz) - - interrupt GPIO for interrupt signal - - -Name: mcp3008 -Info: Configures MCP3008 A/D converters - For devices on spi1 or spi2, the interfaces should be enabled - with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -Load: dtoverlay=mcp3008,[=] -Params: spi--present boolean, configure device at spi, cs - spi--speed integer, set the spi bus speed for this device - - -Name: mcp3202 -Info: Configures MCP3202 A/D converters - For devices on spi1 or spi2, the interfaces should be enabled - with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -Load: dtoverlay=mcp3202,[=] -Params: spi--present boolean, configure device at spi, cs - spi--speed integer, set the spi bus speed for this device - - -Name: mcp342x -Info: Overlay for activation of Microchip MCP3421-3428 ADCs over I2C -Load: dtoverlay=mcp342x,= -Params: addr I2C bus address of device, for devices with - addresses that are configurable, e.g. by - hardware links (default=0x68) - mcp3421 The device is an MCP3421 - mcp3422 The device is an MCP3422 - mcp3423 The device is an MCP3423 - mcp3424 The device is an MCP3424 - mcp3425 The device is an MCP3425 - mcp3426 The device is an MCP3426 - mcp3427 The device is an MCP3427 - mcp3428 The device is an MCP3428 - - -Name: media-center -Info: Media Center HAT - 2.83" Touch Display + extras by Pi Supply -Load: dtoverlay=media-center,= -Params: speed Display SPI bus speed - rotate Display rotation {0,90,180,270} - fps Delay between frame updates - xohms Touchpanel sensitivity (X-plate resistance) - swapxy Swap x and y axis - backlight Change backlight GPIO pin {e.g. 12, 18} - gpio_out_pin GPIO for output (default "17") - gpio_in_pin GPIO for input (default "18") - gpio_in_pull Pull up/down/off on the input pin - (default "down") - sense Override the IR receive auto-detection logic: - "0" = force active-high - "1" = force active-low - "-1" = use auto-detection - (default "-1") - softcarrier Turn the software carrier "on" or "off" - (default "on") - invert "on" = invert the output pin (default "off") - debug "on" = enable additional debug messages - (default "off") - - -Name: merus-amp -Info: Configures the merus-amp audio card -Load: dtoverlay=merus-amp -Params: - - -Name: midi-uart0 -Info: Configures UART0 (ttyAMA0) so that a requested 38.4kbaud actually gets - 31.25kbaud, the frequency required for MIDI -Load: dtoverlay=midi-uart0 -Params: - - -Name: midi-uart1 -Info: Configures UART1 (ttyS0) so that a requested 38.4kbaud actually gets - 31.25kbaud, the frequency required for MIDI -Load: dtoverlay=midi-uart1 -Params: - - -Name: miniuart-bt -Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W - to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 & - 15. Note that this may reduce the maximum usable baudrate. - N.B. It is also necessary to edit /lib/systemd/system/hciuart.service - and replace ttyAMA0 with ttyS0, unless using Raspbian or another - distribution with udev rules that create /dev/serial0 and /dev/serial1, - in which case use /dev/serial1 instead because it will always be - correct. Furthermore, you must also set core_freq and core_freq_min to - the same value in config.txt or the miniuart will not work. -Load: dtoverlay=miniuart-bt -Params: - - -Name: mmc -Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock -Load: dtoverlay=mmc,= -Params: overclock_50 Clock (in MHz) to use when the MMC framework - requests 50MHz - - -Name: mpu6050 -Info: Overlay for i2c connected mpu6050 imu -Load: dtoverlay=mpu6050,= -Params: interrupt GPIO pin for interrupt (default 4) - - -Name: mz61581 -Info: MZ61581 display by Tontec -Load: dtoverlay=mz61581,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - txbuflen Transmit buffer length (default 32768) - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - -Name: ov5647 -Info: Omnivision OV5647 camera module. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. -Load: dtoverlay=ov5647,= -Params: i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - - -Name: papirus -Info: PaPiRus ePaper Screen by Pi Supply (both HAT and pHAT) -Load: dtoverlay=papirus,= -Params: panel Display panel (required): - 1.44": e1144cs021 - 2.0": e2200cs021 - 2.7": e2271cs021 - - speed Display SPI bus speed - - -[ The pcf2127-rtc overlay has been deleted. See i2c-rtc. ] - - -[ The pcf8523-rtc overlay has been deleted. See i2c-rtc. ] - - -[ The pcf8563-rtc overlay has been deleted. See i2c-rtc. ] - - -Name: pi3-act-led -Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias - for backwards compatibility. -Load: - - -Name: pi3-disable-bt -Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an - alias for backwards compatibility. -Load: - - -Name: pi3-disable-wifi -Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as - an alias for backwards compatibility. -Load: - - -Name: pi3-miniuart-bt -Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as - an alias for backwards compatibility. -Load: - - -Name: pibell -Info: Configures the pibell audio card. -Load: dtoverlay=pibell,= -Params: alsaname Set the name as it appears in ALSA (default - "PiBell") - - -Name: piglow -Info: Configures the PiGlow by pimoroni.com -Load: dtoverlay=piglow -Params: - - -Name: piscreen -Info: PiScreen display by OzzMaker.com -Load: dtoverlay=piscreen,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - -Name: piscreen2r -Info: PiScreen 2 with resistive TP display by OzzMaker.com -Load: dtoverlay=piscreen2r,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - xohms Touchpanel sensitivity (X-plate resistance) - - -Name: pisound -Info: Configures the Blokas Labs pisound card -Load: dtoverlay=pisound -Params: - - -Name: pitft22 -Info: Adafruit PiTFT 2.2" screen -Load: dtoverlay=pitft22,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - -Name: pitft28-capacitive -Info: Adafruit PiTFT 2.8" capacitive touch screen -Load: dtoverlay=pitft28-capacitive,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - touch-sizex Touchscreen size x (default 240) - - touch-sizey Touchscreen size y (default 320) - - touch-invx Touchscreen inverted x axis - - touch-invy Touchscreen inverted y axis - - touch-swapxy Touchscreen swapped x y axis - - -Name: pitft28-resistive -Info: Adafruit PiTFT 2.8" resistive touch screen -Load: dtoverlay=pitft28-resistive,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - -Name: pitft35-resistive -Info: Adafruit PiTFT 3.5" resistive touch screen -Load: dtoverlay=pitft35-resistive,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - -Name: pps-gpio -Info: Configures the pps-gpio (pulse-per-second time signal via GPIO). -Load: dtoverlay=pps-gpio,= -Params: gpiopin Input GPIO (default "18") - assert_falling_edge When present, assert is indicated by a falling - edge, rather than by a rising edge (default - off) - capture_clear Generate clear events on the trailing edge - (default off) - - -Name: pwm -Info: Configures a single PWM channel - Legal pin,function combinations for each channel: - PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) - PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) - N.B.: - 1) Pin 18 is the only one available on all platforms, and - it is the one used by the I2S audio interface. - Pins 12 and 13 might be better choices on an A+, B+ or Pi2. - 2) The onboard analogue audio output uses both PWM channels. - 3) So be careful mixing audio and PWM. - 4) Currently the clock must have been enabled and configured - by other means. -Load: dtoverlay=pwm,= -Params: pin Output pin (default 18) - see table - func Pin function (default 2 = Alt5) - see above - clock PWM clock frequency (informational) - - -Name: pwm-2chan -Info: Configures both PWM channels - Legal pin,function combinations for each channel: - PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) - PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) - N.B.: - 1) Pin 18 is the only one available on all platforms, and - it is the one used by the I2S audio interface. - Pins 12 and 13 might be better choices on an A+, B+ or Pi2. - 2) The onboard analogue audio output uses both PWM channels. - 3) So be careful mixing audio and PWM. - 4) Currently the clock must have been enabled and configured - by other means. -Load: dtoverlay=pwm-2chan,= -Params: pin Output pin (default 18) - see table - pin2 Output pin for other channel (default 19) - func Pin function (default 2 = Alt5) - see above - func2 Function for pin2 (default 2 = Alt5) - clock PWM clock frequency (informational) - - -Name: pwm-ir-tx -Info: Use GPIO pin as pwm-assisted infrared transmitter output. - This is an alternative to "gpio-ir-tx". pwm-ir-tx makes use - of PWM0 to reduce the CPU load during transmission compared to - gpio-ir-tx which uses bit-banging. - Legal pin,function combinations are: - 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) -Load: dtoverlay=pwm-ir-tx,= -Params: gpio_pin Output GPIO (default 18) - - func Pin function (default 2 = Alt5) - - -Name: qca7000 -Info: I2SE's Evaluation Board for PLC Stamp micro -Load: dtoverlay=qca7000,= -Params: int_pin GPIO pin for interrupt signal (default 23) - - speed SPI bus speed (default 12 MHz) - - -Name: rotary-encoder -Info: Overlay for GPIO connected rotary encoder. -Load: dtoverlay=rotary-encoder,= -Params: pin_a GPIO connected to rotary encoder channel A - (default 4). - pin_b GPIO connected to rotary encoder channel B - (default 17). - relative_axis register a relative axis rather than an - absolute one. Relative axis will only - generate +1/-1 events on the input device, - hence no steps need to be passed. - linux_axis the input subsystem axis to map to this - rotary encoder. Defaults to 0 (ABS_X / REL_X) - rollover Automatic rollover when the rotary value - becomes greater than the specified steps or - smaller than 0. For absolute axis only. - steps-per-period Number of steps (stable states) per period. - The values have the following meaning: - 1: Full-period mode (default) - 2: Half-period mode - 4: Quarter-period mode - steps Number of steps in a full turnaround of the - encoder. Only relevant for absolute axis. - Defaults to 24 which is a typical value for - such devices. - wakeup Boolean, rotary encoder can wake up the - system. - encoding String, the method used to encode steps. - Supported are "gray" (the default and more - common) and "binary". - - -Name: rpi-backlight -Info: Raspberry Pi official display backlight driver -Load: dtoverlay=rpi-backlight -Params: - - -Name: rpi-cirrus-wm5102 -Info: Configures the Cirrus Logic Audio Card -Load: dtoverlay=rpi-cirrus-wm5102 -Params: - - -Name: rpi-dac -Info: Configures the RPi DAC audio card -Load: dtoverlay=rpi-dac -Params: - - -Name: rpi-display -Info: RPi-Display - 2.8" Touch Display by Watterott -Load: dtoverlay=rpi-display,= -Params: speed Display SPI bus speed - rotate Display rotation {0,90,180,270} - fps Delay between frame updates - debug Debug output level {0-7} - xohms Touchpanel sensitivity (X-plate resistance) - swapxy Swap x and y axis - backlight Change backlight GPIO pin {e.g. 12, 18} - - -Name: rpi-ft5406 -Info: Official Raspberry Pi display touchscreen -Load: dtoverlay=rpi-ft5406,= -Params: touchscreen-size-x Touchscreen X resolution (default 800) - touchscreen-size-y Touchscreen Y resolution (default 600); - touchscreen-inverted-x Invert touchscreen X coordinates (default 0); - touchscreen-inverted-y Invert touchscreen Y coordinates (default 0); - touchscreen-swapped-x-y Swap X and Y cordinates (default 0); - - -Name: rpi-poe -Info: Raspberry Pi PoE HAT fan -Load: dtoverlay=rpi-poe,[=] -Params: poe_fan_temp0 Temperature (in millicelcius) at which the fan - turns on (default 50000) - poe_fan_temp0_hyst Temperature delta (in millicelcius) at which - the fan turns off (default 5000) - poe_fan_temp1 Temperature (in millicelcius) at which the fan - speeds up (default 55000) - poe_fan_temp1_hyst Temperature delta (in millicelcius) at which - the fan slows down (default 5000) - - -Name: rpi-proto -Info: Configures the RPi Proto audio card -Load: dtoverlay=rpi-proto -Params: - - -Name: rpi-sense -Info: Raspberry Pi Sense HAT -Load: dtoverlay=rpi-sense -Params: - - -Name: rpi-tv -Info: Raspberry Pi TV HAT -Load: dtoverlay=rpi-tv -Params: - - -Name: rra-digidac1-wm8741-audio -Info: Configures the Red Rocks Audio DigiDAC1 soundcard -Load: dtoverlay=rra-digidac1-wm8741-audio -Params: - - -Name: sc16is750-i2c -Info: Overlay for the NXP SC16IS750 UART with I2C Interface - Enables the chip on I2C1 at 0x48 (or the "addr" parameter value). To - select another address, please refer to table 10 in reference manual. -Load: dtoverlay=sc16is750-i2c,= -Params: int_pin GPIO used for IRQ (default 24) - addr Address (default 0x48) - xtal On-board crystal frequency (default 14745600) - - -Name: sc16is752-i2c -Info: Overlay for the NXP SC16IS752 dual UART with I2C Interface - Enables the chip on I2C1 at 0x48 (or the "addr" parameter value). To - select another address, please refer to table 10 in reference manual. -Load: dtoverlay=sc16is752-i2c,= -Params: int_pin GPIO used for IRQ (default 24) - addr Address (default 0x48) - xtal On-board crystal frequency (default 14745600) - - -Name: sc16is752-spi1 -Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface - Enables the chip on SPI1. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. - -Load: dtoverlay=sc16is752-spi1,= -Params: int_pin GPIO used for IRQ (default 24) - - -Name: sdhost -Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock. - N.B. This overlay is designed for situations where the mmc driver is - the default, so it disables the other (mmc) interface - this will kill - WiFi on a Pi3. If this isn't what you want, either use the sdtweak - overlay or the new sd_* dtparams of the base DTBs. -Load: dtoverlay=sdhost,= -Params: overclock_50 Clock (in MHz) to use when the MMC framework - requests 50MHz - - force_pio Disable DMA support (default off) - - pio_limit Number of blocks above which to use DMA - (default 1) - - debug Enable debug output (default off) - - -Name: sdio -Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock, - and enables SDIO via GPIOs 22-27. An example of use in 1-bit mode is - "dtoverlay=sdio,bus_width=1,gpios_22_25" -Load: dtoverlay=sdio,= -Params: sdio_overclock SDIO Clock (in MHz) to use when the MMC - framework requests 50MHz - - poll_once Disable SDIO-device polling every second - (default on: polling once at boot-time) - - bus_width Set the SDIO host bus width (default 4 bits) - - gpios_22_25 Select GPIOs 22-25 for 1-bit mode. Must be used - with bus_width=1. This replaces the sdio-1bit - overlay, which is now deprecated. - - gpios_34_37 Select GPIOs 34-37 for 1-bit mode. Must be used - with bus_width=1. - - gpios_34_39 Select GPIOs 34-39 for 4-bit mode. Must be used - with bus_width=4 (the default). - - -Name: sdio-1bit -Info: This overlay is now deprecated. Use - "dtoverlay=sdio,bus_width=1,gpios_22_25" instead. -Load: - - -Name: sdtweak -Info: Tunes the bcm2835-sdhost SD/MMC driver - N.B. This functionality is now available via the sd_* dtparams in the - base DTB. -Load: dtoverlay=sdtweak,= -Params: overclock_50 Clock (in MHz) to use when the MMC framework - requests 50MHz - - force_pio Disable DMA support (default off) - - pio_limit Number of blocks above which to use DMA - (default 1) - - debug Enable debug output (default off) - - poll_once Looks for a card once after booting. Useful - for network booting scenarios to avoid the - overhead of continuous polling. N.B. Using - this option restricts the system to using a - single card per boot (or none at all). - (default off) - - enable Set to off to completely disable the interface - (default on) - - -Name: sh1106-spi -Info: Overlay for SH1106 OLED via SPI using fbtft staging driver. -Load: dtoverlay=sh1106-spi,= -Params: speed SPI bus speed (default 4000000) - rotate Display rotation (0, 90, 180 or 270; default 0) - fps Delay between frame updates (default 25) - debug Debug output level (0-7; default 0) - dc_pin GPIO pin for D/C (default 24) - reset_pin GPIO pin for RESET (default 25) - height Display height (32 or 64; default 64) - - -Name: smi -Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! -Load: dtoverlay=smi -Params: - - -Name: smi-dev -Info: Enables the userspace interface for the SMI driver -Load: dtoverlay=smi-dev -Params: - - -Name: smi-nand -Info: Enables access to NAND flash via the SMI interface -Load: dtoverlay=smi-nand -Params: - - -Name: spi-gpio35-39 -Info: Move SPI function block to GPIO 35 to 39 -Load: dtoverlay=spi-gpio35-39 -Params: - - -Name: spi-gpio40-45 -Info: Move SPI function block to GPIOs 40 to 45 -Load: dtoverlay=spi-gpio40-45 -Params: - - -Name: spi-rtc -Info: Adds support for a number of SPI Real Time Clock devices -Load: dtoverlay=spi-rtc,= -Params: pcf2123 Select the PCF2123 device - - -Name: spi0-cs -Info: Allows the (software) CS pins for SPI0 to be changed -Load: dtoverlay=spi0-cs,= -Params: cs0_pin GPIO pin for CS0 (default 8) - cs1_pin GPIO pin for CS1 (default 7) - - -Name: spi0-hw-cs -Info: Re-enables hardware CS/CE (chip selects) for SPI0 -Load: dtoverlay=spi0-hw-cs -Params: - - -Name: spi1-1cs -Info: Enables spi1 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. -Load: dtoverlay=spi1-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). - - -Name: spi1-2cs -Info: Enables spi1 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. -Load: dtoverlay=spi1-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). - cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.1 (default - is 'okay' or enabled). - - -Name: spi1-3cs -Info: Enables spi1 with three chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. -Load: dtoverlay=spi1-3cs,= -Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). - cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). - cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.1 (default - is 'okay' or enabled). - cs2_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev1.2 (default - is 'okay' or enabled). - - -Name: spi2-1cs -Info: Enables spi2 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. -Load: dtoverlay=spi2-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). - - -Name: spi2-2cs -Info: Enables spi2 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. -Load: dtoverlay=spi2-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). - cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.1 (default - is 'okay' or enabled). - - -Name: spi2-3cs -Info: Enables spi2 with three chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. -Load: dtoverlay=spi2-3cs,= -Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). - cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). - cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). - cs0_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.1 (default - is 'okay' or enabled). - cs2_spidev Set to 'disabled' to stop the creation of a - userspace device node /dev/spidev2.2 (default - is 'okay' or enabled). - - -Name: spi3-1cs -Info: Enables spi3 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. -Load: dtoverlay=spi3-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev3.0 (default - is 'on' or enabled). - - -Name: spi3-2cs -Info: Enables spi3 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. -Load: dtoverlay=spi3-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). - cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev3.0 (default - is 'on' or enabled). - cs1_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev3.1 (default - is 'on' or enabled). - - -Name: spi4-1cs -Info: Enables spi4 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. -Load: dtoverlay=spi4-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev4.0 (default - is 'on' or enabled). - - -Name: spi4-2cs -Info: Enables spi4 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. -Load: dtoverlay=spi4-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). - cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev4.0 (default - is 'on' or enabled). - cs1_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev4.1 (default - is 'on' or enabled). - - -Name: spi5-1cs -Info: Enables spi5 with a single chip select (CS) line and associated spidev - dev node. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. -Load: dtoverlay=spi5-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev5.0 (default - is 'on' or enabled). - - -Name: spi5-2cs -Info: Enables spi5 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. -Load: dtoverlay=spi5-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). - cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev5.0 (default - is 'on' or enabled). - cs1_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev5.1 (default - is 'on' or enabled). - - -Name: spi6-1cs -Info: Enables spi6 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. -Load: dtoverlay=spi6-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev6.0 (default - is 'on' or enabled). - - -Name: spi6-2cs -Info: Enables spi6 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. -Load: dtoverlay=spi6-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI6_CE0). - cs1_pin GPIO pin for CS1 (default 27 - BCM SPI6_CE1). - cs0_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev6.0 (default - is 'on' or enabled). - cs1_spidev Set to 'off' to prevent the creation of a - userspace device node /dev/spidev6.1 (default - is 'on' or enabled). - - -Name: ssd1306 -Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer. -Load: dtoverlay=ssd1306,= -Params: address Location in display memory of first character. - (default=0) - width Width of display. (default=128) - height Height of display. (default=64) - offset virtual channel a. (default=0) - normal Has no effect on displays tested. (default=not - set) - sequential Set this if every other scan line is missing. - (default=not set) - remapped Set this if display is garbled. (default=not - set) - inverted Set this if display is inverted and mirrored. - (default=not set) - - Examples: - Typical usage for 128x64 display: dtoverlay=ssd1306,inverted - - Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential - - i2c_baudrate=400000 will speed up the display. - - i2c_baudrate=1000000 seems to work even though it's not officially - supported by the hardware, and is faster still. - - For more information refer to the device datasheet at: - https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf - - -Name: ssd1306-spi -Info: Overlay for SSD1306 OLED via SPI using fbtft staging driver. -Load: dtoverlay=ssd1306-spi,= -Params: speed SPI bus speed (default 10000000) - rotate Display rotation (0, 90, 180 or 270; default 0) - fps Delay between frame updates (default 25) - debug Debug output level (0-7; default 0) - dc_pin GPIO pin for D/C (default 24) - reset_pin GPIO pin for RESET (default 25) - height Display height (32 or 64; default 64) - - -Name: ssd1351-spi -Info: Overlay for SSD1351 OLED via SPI using fbtft staging driver. -Load: dtoverlay=ssd1351-spi,= -Params: speed SPI bus speed (default 4500000) - rotate Display rotation (0, 90, 180 or 270; default 0) - fps Delay between frame updates (default 25) - debug Debug output level (0-7; default 0) - dc_pin GPIO pin for D/C (default 24) - reset_pin GPIO pin for RESET (default 25) - - -Name: superaudioboard -Info: Configures the SuperAudioBoard sound card -Load: dtoverlay=superaudioboard,= -Params: gpiopin GPIO pin for codec reset - - -Name: sx150x -Info: Configures the Semtech SX150X I2C GPIO expanders. -Load: dtoverlay=sx150x,= -Params: sx150-- Enables SX150X device on I2C# with slave - address . may be 1-9. may be 0 or 1. - Permissible values of (which is denoted in - hex) depend on the device variant. For SX1501, - SX1502, SX1504 and SX1505, may be 20 or 21. - For SX1503 and SX1506, may be 20. For - SX1507 and SX1509, may be 3E, 3F, 70 or 71. - For SX1508, may be 20, 21, 22 or 23. - - sx150---int-gpio - Integer, enables interrupts on SX150X device on - I2C# with slave address , specifies - the GPIO pin to which NINT output of SX150X is - connected. - - -Name: tc358743 -Info: Toshiba TC358743 HDMI to CSI-2 bridge chip. - Uses Unicam 1, which is the standard camera connector on most Pi - variants. -Load: dtoverlay=tc358743,= -Params: 4lane Use 4 lanes (only applicable to Compute Modules - CAM1 connector). - - link-frequency Set the link frequency. Only values of 297000000 - (574Mbit/s) and 486000000 (972Mbit/s - default) - are supported by the driver. - - i2c_pins_0_1 Use pins 0&1 for the I2C instead of 44&45. - Useful on Compute Modules. - - i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45. - This is required for Pi B+, 2, 0, and 0W. - - -Name: tc358743-audio -Info: Used in combination with the tc358743-fast overlay to route the audio - from the TC358743 over I2S to the Pi. - Wiring is LRCK/WFS to GPIO 19, BCK/SCK to GPIO 18, and DATA/SD to GPIO - 20. -Load: dtoverlay=tc358743-audio,= -Params: card-name Override the default, "tc358743", card name. - - -Name: tinylcd35 -Info: 3.5" Color TFT Display by www.tinylcd.com - Options: Touch, RTC, keypad -Load: dtoverlay=tinylcd35,= -Params: speed Display SPI bus speed - - rotate Display rotation {0,90,180,270} - - fps Delay between frame updates - - debug Debug output level {0-7} - - touch Enable touch panel - - touchgpio Touch controller IRQ GPIO - - xohms Touchpanel: Resistance of X-plate in ohms - - rtc-pcf PCF8563 Real Time Clock - - rtc-ds DS1307 Real Time Clock - - keypad Enable keypad - - Examples: - Display with touchpanel, PCF8563 RTC and keypad: - dtoverlay=tinylcd35,touch,rtc-pcf,keypad - Old touch display: - dtoverlay=tinylcd35,touch,touchgpio=3 - - -Name: tpm-slb9670 -Info: Enables support for Infineon SLB9670 Trusted Platform Module add-on - boards, which can be used as a secure key storage and hwrng, - available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. -Load: dtoverlay=tpm-slb9670 -Params: - - -Name: uart0 -Info: Change the pin usage of uart0 -Load: dtoverlay=uart0,= -Params: txd0_pin GPIO pin for TXD0 (14, 32 or 36 - default 14) - - rxd0_pin GPIO pin for RXD0 (15, 33 or 37 - default 15) - - pin_func Alternative pin function - 4(Alt0) for 14&15, - 7(Alt3) for 32&33, 6(Alt2) for 36&37 - - -Name: uart1 -Info: Change the pin usage of uart1 -Load: dtoverlay=uart1,= -Params: txd1_pin GPIO pin for TXD1 (14, 32 or 40 - default 14) - - rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) - - -Name: uart2 -Info: Enable uart 2 on GPIOs 0-3 -Load: dtoverlay=uart2, -Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) - - -Name: uart3 -Info: Enable uart 3 on GPIOs 4-7 -Load: dtoverlay=uart3, -Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) - - -Name: uart4 -Info: Enable uart 4 on GPIOs 8-11 -Load: dtoverlay=uart4, -Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) - - -Name: uart5 -Info: Enable uart 5 on GPIOs 12-15 -Load: dtoverlay=uart5, -Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) - - -Name: udrc -Info: Configures the NW Digital Radio UDRC Hat -Load: dtoverlay=udrc,= -Params: alsaname Name of the ALSA audio device (default "udrc") - - -Name: upstream -Info: Allow usage of downstream .dtb with upstream kernel. Comprises the - vc4-kms-v3d and dwc2 overlays. -Load: dtoverlay=upstream -Params: - - -Name: upstream-aux-interrupt -Info: This overlay has been deprecated and removed because it is no longer - necessary. -Load: - - -Name: vc4-fkms-v3d -Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx - display stack. -Load: dtoverlay=vc4-fkms-v3d, -Params: cma-256 CMA is 256MB (needs 1GB) - cma-192 CMA is 192MB (needs 1GB) - cma-128 CMA is 128MB - cma-96 CMA is 96MB - cma-64 CMA is 64MB - - -Name: vc4-kms-kippah-7inch -Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached. - Requires vc4-kms-v3d to be loaded. -Load: dtoverlay=vc4-kms-kippah-7inch -Params: - - -Name: vc4-kms-v3d -Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or - booting to GUI while this overlay is in use will cause interesting - lockups. -Load: dtoverlay=vc4-kms-v3d, -Params: cma-256 CMA is 256MB (needs 1GB) - cma-192 CMA is 192MB (needs 1GB) - cma-128 CMA is 128MB - cma-96 CMA is 96MB - cma-64 CMA is 64MB - audio Enable or disable audio over HDMI (default "on") - - -Name: vga666 -Info: Overlay for the Fen Logic VGA666 board - This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds - after the kernel has started. -Load: dtoverlay=vga666 -Params: - - -Name: w1-gpio -Info: Configures the w1-gpio Onewire interface module. - Use this overlay if you *don't* need a GPIO to drive an external pullup. -Load: dtoverlay=w1-gpio,= -Params: gpiopin GPIO for I/O (default "4") - pullup Now enabled by default (ignored) - - -Name: w1-gpio-pullup -Info: Configures the w1-gpio Onewire interface module. - Use this overlay if you *do* need a GPIO to drive an external pullup. -Load: dtoverlay=w1-gpio-pullup,= -Params: gpiopin GPIO for I/O (default "4") - extpullup GPIO for external pullup (default "5") - pullup Now enabled by default (ignored) - - -Name: w5500 -Info: Overlay for the Wiznet W5500 Ethernet Controller on SPI0 -Load: dtoverlay=w5500,= -Params: int_pin GPIO used for INT (default 25) - - speed SPI bus speed (default 30000000) - - cs SPI bus Chip Select (default 0) - - -Name: wittypi -Info: Configures the wittypi RTC module. -Load: dtoverlay=wittypi,= -Params: led_gpio GPIO for LED (default "17") - led_trigger Choose which activity the LED tracks (default - "default-on") - - -Troubleshooting -=============== - -If you are experiencing problems that you think are DT-related, enable DT -diagnostic output by adding this to /boot/config.txt: - - dtdebug=on - -and rebooting. Then run: - - sudo vcdbg log msg - -and look for relevant messages. - -Further reading -=============== - -This is only meant to be a quick introduction to the subject of Device Tree on -Raspberry Pi. There is a more complete explanation here: - -http://www.raspberrypi.org/documentation/configuration/device-tree.md diff --git a/arch/arm64/boot/dts/overlays/act-led-overlay.dts b/arch/arm64/boot/dts/overlays/act-led-overlay.dts deleted file mode 100644 index 2f4bbb407f896b5988d000b22a18b298d49d1045..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/act-led-overlay.dts +++ /dev/null @@ -1,27 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed - from the VPU. There is a special driver for this with a separate DT node, - which has the unfortunate consequence of breaking the act_led_gpio and - act_led_activelow dtparams. - - This overlay changes the GPIO controller back to the standard one and - restores the dtparams. -*/ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&act_led>; - frag0: __overlay__ { - gpios = <&gpio 0 0>; - }; - }; - - __overrides__ { - gpio = <&frag0>,"gpios:4"; - activelow = <&frag0>,"gpios:8"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/adau1977-adc-overlay.dts b/arch/arm64/boot/dts/overlays/adau1977-adc-overlay.dts deleted file mode 100644 index 298488e19156514cd743e2d6366943c62d0b9129..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/adau1977-adc-overlay.dts +++ /dev/null @@ -1,40 +0,0 @@ -// Definitions for ADAU1977 ADC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c>; - - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - adau1977: codec@11 { - compatible = "adi,adau1977"; - reg = <0x11>; - reset-gpios = <&gpio 5 0>; - AVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "adi,adau1977-adc"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/adau7002-simple-overlay.dts b/arch/arm64/boot/dts/overlays/adau7002-simple-overlay.dts deleted file mode 100644 index 5fed769d252608769f586be73e4b9444e34c28cc..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/adau7002-simple-overlay.dts +++ /dev/null @@ -1,52 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - adau7002_codec: adau7002-codec { - #sound-dai-cells = <0>; - compatible = "adi,adau7002"; -/* IOVDD-supply = <&supply>;*/ - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - sound_overlay: __overlay__ { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "adau7002"; - simple-audio-card,bitclock-slave = <&dailink0_slave>; - simple-audio-card,frame-slave = <&dailink0_slave>; - simple-audio-card,widgets = - "Microphone", "Microphone Jack"; - simple-audio-card,routing = - "PDM_DAT", "Microphone Jack"; - status = "okay"; - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - dailink0_slave: simple-audio-card,codec { - sound-dai = <&adau7002_codec>; - }; - }; - }; - - - __overrides__ { - card-name = <&sound_overlay>,"simple-audio-card,name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ads1015-overlay.dts b/arch/arm64/boot/dts/overlays/ads1015-overlay.dts deleted file mode 100644 index 26d68fccc6a85fa8b205d5052a3d5ab2da844fb0..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ads1015-overlay.dts +++ /dev/null @@ -1,98 +0,0 @@ -/* - * 2016 - Erik Sejr - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - /* ----------- ADS1015 ------------ */ - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - ads1015: ads1015 { - compatible = "ti,ads1015"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x48>; - }; - }; - }; - - fragment@1 { - target-path = "i2c_arm/ads1015"; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - channel_a: channel_a { - reg = <4>; - ti,gain = <2>; - ti,datarate = <4>; - }; - }; - }; - - fragment@2 { - target-path = "i2c_arm/ads1015"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - channel_b: channel_b { - reg = <5>; - ti,gain = <2>; - ti,datarate = <4>; - }; - }; - }; - - fragment@3 { - target-path = "i2c_arm/ads1015"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - channel_c: channel_c { - reg = <6>; - ti,gain = <2>; - ti,datarate = <4>; - }; - }; - }; - - fragment@4 { - target-path = "i2c_arm/ads1015"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - channel_d: channel_d { - reg = <7>; - ti,gain = <2>; - ti,datarate = <4>; - }; - }; - }; - - __overrides__ { - addr = <&ads1015>,"reg:0"; - cha_enable = <0>,"=1"; - cha_cfg = <&channel_a>,"reg:0"; - cha_gain = <&channel_a>,"ti,gain:0"; - cha_datarate = <&channel_a>,"ti,datarate:0"; - chb_enable = <0>,"=2"; - chb_cfg = <&channel_b>,"reg:0"; - chb_gain = <&channel_b>,"ti,gain:0"; - chb_datarate = <&channel_b>,"ti,datarate:0"; - chc_enable = <0>,"=3"; - chc_cfg = <&channel_c>,"reg:0"; - chc_gain = <&channel_c>,"ti,gain:0"; - chc_datarate = <&channel_c>,"ti,datarate:0"; - chd_enable = <0>,"=4"; - chd_cfg = <&channel_d>,"reg:0"; - chd_gain = <&channel_d>,"ti,gain:0"; - chd_datarate = <&channel_d>,"ti,datarate:0"; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/ads1115-overlay.dts b/arch/arm64/boot/dts/overlays/ads1115-overlay.dts deleted file mode 100644 index b380d925f0a512adf040248f3add68156940d2d0..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ads1115-overlay.dts +++ /dev/null @@ -1,103 +0,0 @@ -/* - * TI ADS1115 multi-channel ADC overlay - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ads1115: ads1115 { - compatible = "ti,ads1115"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x48>; - }; - }; - }; - - fragment@1 { - target-path = "i2c_arm/ads1115"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - channel_a: channel_a { - reg = <4>; - ti,gain = <1>; - ti,datarate = <7>; - }; - }; - }; - - fragment@2 { - target-path = "i2c_arm/ads1115"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - channel_b: channel_b { - reg = <5>; - ti,gain = <1>; - ti,datarate = <7>; - }; - }; - }; - - fragment@3 { - target-path = "i2c_arm/ads1115"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - channel_c: channel_c { - reg = <6>; - ti,gain = <1>; - ti,datarate = <7>; - }; - }; - }; - - fragment@4 { - target-path = "i2c_arm/ads1115"; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - channel_d: channel_d { - reg = <7>; - ti,gain = <1>; - ti,datarate = <7>; - }; - }; - }; - - __overrides__ { - addr = <&ads1115>,"reg:0"; - cha_enable = <0>,"=1"; - cha_cfg = <&channel_a>,"reg:0"; - cha_gain = <&channel_a>,"ti,gain:0"; - cha_datarate = <&channel_a>,"ti,datarate:0"; - chb_enable = <0>,"=2"; - chb_cfg = <&channel_b>,"reg:0"; - chb_gain = <&channel_b>,"ti,gain:0"; - chb_datarate = <&channel_b>,"ti,datarate:0"; - chc_enable = <0>,"=3"; - chc_cfg = <&channel_c>,"reg:0"; - chc_gain = <&channel_c>,"ti,gain:0"; - chc_datarate = <&channel_c>,"ti,datarate:0"; - chd_enable = <0>,"=4"; - chd_cfg = <&channel_d>,"reg:0"; - chd_gain = <&channel_d>,"ti,gain:0"; - chd_datarate = <&channel_d>,"ti,datarate:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ads7846-overlay.dts b/arch/arm64/boot/dts/overlays/ads7846-overlay.dts deleted file mode 100644 index 1c5c9b6bb6ffd757dad56116fd4eadbacc449024..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ads7846-overlay.dts +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Generic Device Tree overlay for the ADS7846 touch controller - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - ads7846_pins: ads7846_pins { - brcm,pins = <255>; /* illegal default value */ - brcm,function = <0>; /* in */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - ads7846: ads7846@1 { - compatible = "ti,ads7846"; - reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&ads7846_pins>; - - spi-max-frequency = <2000000>; - interrupts = <255 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 255 0>; - - /* driver defaults */ - ti,x-min = /bits/ 16 <0>; - ti,y-min = /bits/ 16 <0>; - ti,x-max = /bits/ 16 <0x0FFF>; - ti,y-max = /bits/ 16 <0x0FFF>; - ti,pressure-min = /bits/ 16 <0>; - ti,pressure-max = /bits/ 16 <0xFFFF>; - ti,x-plate-ohms = /bits/ 16 <400>; - }; - }; - }; - __overrides__ { - cs = <&ads7846>,"reg:0"; - speed = <&ads7846>,"spi-max-frequency:0"; - penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */ - <&ads7846>,"interrupts:0", - <&ads7846>,"pendown-gpio:4"; - penirq_pull = <&ads7846_pins>,"brcm,pull:0"; - swapxy = <&ads7846>,"ti,swap-xy?"; - xmin = <&ads7846>,"ti,x-min;0"; - ymin = <&ads7846>,"ti,y-min;0"; - xmax = <&ads7846>,"ti,x-max;0"; - ymax = <&ads7846>,"ti,y-max;0"; - pmin = <&ads7846>,"ti,pressure-min;0"; - pmax = <&ads7846>,"ti,pressure-max;0"; - xohms = <&ads7846>,"ti,x-plate-ohms;0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/adv7282m-overlay.dts b/arch/arm64/boot/dts/overlays/adv7282m-overlay.dts deleted file mode 100644 index 197c8f41a26587d2a6c68fcfc7175f6fbcf6fc22..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/adv7282m-overlay.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for Analog Devices ADV7282-M video to CSI2 bridge on VC I2C bus -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - adv728x: adv728x@21 { - compatible = "adi,adv7282-m"; - reg = <0x21>; - status = "okay"; - clock-frequency = <24000000>; - port { - adv728x_0: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - data-lanes = <1>; - link-frequencies = - /bits/ 64 <297000000>; - - mclk-frequency = <12000000>; - }; - }; - }; - }; - }; - fragment@1 { - target = <&csi1>; - __overlay__ { - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&adv728x_0>; - }; - }; - }; - }; - fragment@2 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - - }; - fragment@3 { - target = <&i2c0_pins>; - __overlay__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - fragment@4 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - i2c_pins_0_1 = <0>,"-2-3+4"; - i2c_pins_28_29 = <0>,"+2-3-4"; - addr = <&adv728x>,"reg:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/adv728x-m-overlay.dts b/arch/arm64/boot/dts/overlays/adv728x-m-overlay.dts deleted file mode 100644 index ea392e886984beb863d0f38f00ad39cc1937c388..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/adv728x-m-overlay.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC -// I2C bus - -#include "adv7282m-overlay.dts" - -/{ - compatible = "brcm,bcm2835"; - - // Fragment numbers deliberately high to avoid conflicts with the - // included adv7282m overlay file. - - fragment@101 { - target = <&adv728x>; - __dormant__ { - compatible = "adi,adv7280-m"; - }; - }; - fragment@102 { - target = <&adv728x>; - __dormant__ { - compatible = "adi,adv7281-m"; - }; - }; - fragment@103 { - target = <&adv728x>; - __dormant__ { - compatible = "adi,adv7281-ma"; - }; - }; - - __overrides__ { - adv7280m = <0>, "+101"; - adv7281m = <0>, "+102"; - adv7281ma = <0>, "+103"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/akkordion-iqdacplus-overlay.dts b/arch/arm64/boot/dts/overlays/akkordion-iqdacplus-overlay.dts deleted file mode 100644 index 82f9b3734fb1264e16a3f9610e5ee52f6a3c66ca..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - frag2: __overlay__ { - compatible = "iqaudio,iqaudio-dac"; - card_name = "Akkordion"; - dai_name = "IQaudIO DAC"; - dai_stream_name = "IQaudIO DAC HiFi"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts b/arch/arm64/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts deleted file mode 100644 index dd69916fcb3c1ff0d4c9da90a4f615420d29dd1f..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Definitions for Allo Boss DAC board - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - boss_osc: boss_osc { - compatible = "allo,dac-clk"; - #clock-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - clocks = <&boss_osc>; - reg = <0x4d>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - boss_dac: __overlay__ { - compatible = "allo,boss-dac"; - i2s-controller = <&i2s>; - mute-gpios = <&gpio 6 1>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&boss_dac>,"allo,24db_digital_gain?"; - slave = <&boss_dac>,"allo,slave?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/allo-digione-overlay.dts b/arch/arm64/boot/dts/overlays/allo-digione-overlay.dts deleted file mode 100644 index ea018ace34d4fe0f080dd3156ed1435ac62f7b94..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/allo-digione-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -// Definitions for Allo DigiOne -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - wlf,reset-gpio = <&gpio 17 0>; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "allo,allo-digione"; - i2s-controller = <&i2s>; - status = "okay"; - clock44-gpio = <&gpio 5 0>; - clock48-gpio = <&gpio 6 0>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/allo-katana-dac-audio-overlay.dts b/arch/arm64/boot/dts/overlays/allo-katana-dac-audio-overlay.dts deleted file mode 100644 index b25fd681f09f3e73dda73a3ce069027d3d36d535..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/allo-katana-dac-audio-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Definitions for Allo Katana DAC boards - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - #sound-dai-cells = <0>; - status = "okay"; - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - bitclock-master = <&codec_endpoint>; - frame-master = <&codec_endpoint>; - dai-format = "i2s"; - }; - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - allo-katana-codec@30 { - #sound-dai-cells = <0>; - compatible = "allo,allo-katana-codec"; - reg = <0x30>; - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - }; - }; - - fragment@2 { - target = <&sound>; - katana_dac: __overlay__ { - compatible = "audio-graph-card"; - label = "Allo Katana"; - dais = <&cpu_port>; - status = "okay"; - }; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts b/arch/arm64/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts deleted file mode 100644 index bfc66da6295a882c723b786f3bf59c137f6d7c80..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Definitions for Allo Piano DAC (2.0/2.1) boards - * - * NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo - * (left/right) and the other provides a subwoofer output, using DSP on the - * chip for digital high/low pass crossover. - * The initial support for this hardware, that doesn't require any codec driver - * modifications, uses only one DAC chip for stereo (left/right) output, the - * chip with 0x4c slave address. The other chip at 0x4d is currently ignored! - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5142@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5142"; - reg = <0x4c>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - piano_dac: __overlay__ { - compatible = "allo,piano-dac"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = - <&piano_dac>,"allo,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts b/arch/arm64/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts deleted file mode 100644 index 374c553db062e745cab29d389a2ffd1f26d0a543..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts +++ /dev/null @@ -1,55 +0,0 @@ -// Definitions for Piano DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - allo_pcm5122_4c: pcm5122@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; - status = "okay"; - }; - allo_pcm5122_4d: pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - piano_dac: __overlay__ { - compatible = "allo,piano-dac-plus"; - audio-codec = <&allo_pcm5122_4c &allo_pcm5122_4d>; - i2s-controller = <&i2s>; - mute1-gpios = <&gpio 6 1>; - mute2-gpios = <&gpio 25 1>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = - <&piano_dac>,"allo,24db_digital_gain?"; - glb_mclk = - <&piano_dac>,"allo,glb_mclk?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/anyspi-overlay.dts b/arch/arm64/boot/dts/overlays/anyspi-overlay.dts deleted file mode 100644 index 87523dcca318cf71c1f3550866044c9060149fb3..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/anyspi-overlay.dts +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Universal device tree overlay for SPI devices - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@2 { - target-path = "spi1/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@3 { - target-path = "spi1/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@4 { - target-path = "spi1/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@5 { - target-path = "spi2/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@6 { - target-path = "spi2/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@7 { - target-path = "spi2/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@8 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_00: anyspi@0 { - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@9 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_01: anyspi@1 { - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@10 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_10: anyspi@0 { - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@11 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_11: anyspi@1 { - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@12 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_12: anyspi@2 { - reg = <2>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@13 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_20: anyspi@0 { - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@14 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_21: anyspi@1 { - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - fragment@15 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - anyspi_22: anyspi@2 { - reg = <2>; - spi-max-frequency = <500000>; - }; - }; - }; - - __overrides__ { - spi0-0 = <0>, "+0+8"; - spi0-1 = <0>, "+1+9"; - spi1-0 = <0>, "+2+10"; - spi1-1 = <0>, "+3+11"; - spi1-2 = <0>, "+4+12"; - spi2-0 = <0>, "+5+13"; - spi2-1 = <0>, "+6+14"; - spi2-2 = <0>, "+7+15"; - dev = <&anyspi_00>,"compatible", - <&anyspi_01>,"compatible", - <&anyspi_10>,"compatible", - <&anyspi_11>,"compatible", - <&anyspi_12>,"compatible", - <&anyspi_20>,"compatible", - <&anyspi_21>,"compatible", - <&anyspi_22>,"compatible"; - speed = <&anyspi_00>, "spi-max-frequency:0", - <&anyspi_01>, "spi-max-frequency:0", - <&anyspi_10>, "spi-max-frequency:0", - <&anyspi_11>, "spi-max-frequency:0", - <&anyspi_12>, "spi-max-frequency:0", - <&anyspi_20>, "spi-max-frequency:0", - <&anyspi_21>, "spi-max-frequency:0", - <&anyspi_22>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/apds9960-overlay.dts b/arch/arm64/boot/dts/overlays/apds9960-overlay.dts deleted file mode 100644 index c216932278ab77b719a333df3868b6b395c29992..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/apds9960-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -// Definitions for APDS-9960 ambient light and gesture sensor - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - apds9960_pins: apds9960_pins@39 { - brcm,pins = <4>; - brcm,function = <0>; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - apds9960: apds@39 { - compatible = "avago,apds9960"; - reg = <0x39>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2c1>; - __overlay__ { - apds9960_irq: apds@39 { - #interrupt-cells=<2>; - interrupt-parent = <&gpio>; - interrupts = <4 1>; - }; - }; - }; - - __overrides__ { - gpiopin = <&apds9960_pins>,"brcm,pins:0", - <&apds9960_irq>,"interrupts:0"; - noints = <0>,"!1!3"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/applepi-dac-overlay.dts b/arch/arm64/boot/dts/overlays/applepi-dac-overlay.dts deleted file mode 100644 index 4769296ec9d6f08b0c17d6a2f9aac05ae6d06ab9..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/applepi-dac-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; - __overlay__ { - compatible = "simple-audio-card"; - simple-audio-card,name = "ApplePi-DAC"; - - status = "okay"; - - playback_link: simple-audio-card,dai-link@1 { - format = "i2s"; - - p_cpu_dai: cpu { - sound-dai = <&i2s>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - - p_codec_dai: codec { - sound-dai = <&codec_out>; - }; - }; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - codec_out: pcm1794a-codec { - #sound-dai-cells = <0>; - compatible = "ti,pcm1794a"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2s>; - __overlay__ { - #sound-dai-cells = <0>; - status = "okay"; - }; - }; -}; - -/* - Written by: Leonid Ayzenshtat - Company: Orchard Audio (www.orchardaudio.com) - - compile with: - dtc -@ -H epapr -O dtb -o ApplePi-DAC.dtbo -W no-unit_address_vs_reg ApplePi-DAC.dts -*/ diff --git a/arch/arm64/boot/dts/overlays/at86rf233-overlay.dts b/arch/arm64/boot/dts/overlays/at86rf233-overlay.dts deleted file mode 100644 index 5a3f4571ee789f85f2ac4a27a406be869fd55555..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/at86rf233-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */ - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - lowpan0: at86rf233@0 { - compatible = "atmel,at86rf233"; - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <23 4>; /* active high */ - reset-gpio = <&gpio 24 1>; - sleep-gpio = <&gpio 25 1>; - spi-max-frequency = <3000000>; - xtal-trim = /bits/ 8 <0xf>; - }; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - lowpan0_pins: lowpan0_pins { - brcm,pins = <23 24 25>; - brcm,function = <0 1 1>; /* in out out */ - }; - }; - }; - - __overrides__ { - interrupt = <&lowpan0>, "interrupts:0", - <&lowpan0_pins>, "brcm,pins:0"; - reset = <&lowpan0>, "reset-gpio:4", - <&lowpan0_pins>, "brcm,pins:4"; - sleep = <&lowpan0>, "sleep-gpio:4", - <&lowpan0_pins>, "brcm,pins:8"; - speed = <&lowpan0>, "spi-max-frequency:0"; - trim = <&lowpan0>, "xtal-trim.0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/audioinjector-addons-overlay.dts b/arch/arm64/boot/dts/overlays/audioinjector-addons-overlay.dts deleted file mode 100644 index 57a66eac8e9b22d960df8549c31c721f88e44048..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/audioinjector-addons-overlay.dts +++ /dev/null @@ -1,60 +0,0 @@ -// Definitions for audioinjector.net audio add on soundcard -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - cs42448_mclk: codec-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <49152000>; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - cs42448: cs42448@48 { - #sound-dai-cells = <0>; - compatible = "cirrus,cs42448"; - reg = <0x48>; - clocks = <&cs42448_mclk>; - clock-names = "mclk"; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - snd: __overlay__ { - compatible = "ai,audioinjector-octo-soundcard"; - mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>, - <&gpio 24 0>; - reset-gpios = <&gpio 5 0>; - i2s-controller = <&i2s>; - codec = <&cs42448>; - status = "okay"; - }; - }; - - __overrides__ { - non-stop-clocks = <&snd>, "non-stop-clocks?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/audioinjector-ultra-overlay.dts b/arch/arm64/boot/dts/overlays/audioinjector-ultra-overlay.dts deleted file mode 100644 index fb4a4678a17abba03e70a47898f6da05c01517d7..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/audioinjector-ultra-overlay.dts +++ /dev/null @@ -1,71 +0,0 @@ -// Definitions for audioinjector.net audio add on soundcard -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - cs4265: cs4265@4e { - #sound-dai-cells = <0>; - compatible = "cirrus,cs4265"; - reg = <0x4e>; - reset-gpios = <&gpio 5 0>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "simple-audio-card"; - i2s-controller = <&i2s>; - status = "okay"; - - simple-audio-card,name = "audioinjector-ultra"; - - simple-audio-card,widgets = - "Line", "OUTPUTS", - "Line", "INPUTS"; - - simple-audio-card,routing = - "OUTPUTS","LINEOUTL", - "OUTPUTS","LINEOUTR", - "OUTPUTS","SPDIFOUT", - "LINEINL","INPUTS", - "LINEINR","INPUTS", - "MICL","INPUTS", - "MICR","INPUTS"; - - simple-audio-card,format = "i2s"; - - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&cs4265>; - system-clock-frequency = <12288000>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts b/arch/arm64/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts deleted file mode 100644 index 68f4427d86c35cc1a99a597a4c814aae6554354e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -// Definitions for audioinjector.net audio add on soundcard -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8731@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8731"; - reg = <0x1a>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "ai,audioinjector-pi-soundcard"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/audiosense-pi-overlay.dts b/arch/arm64/boot/dts/overlays/audiosense-pi-overlay.dts deleted file mode 100644 index 4b96a3a8a14a2605f6f0c09b3ff7e809a0c9c68d..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/audiosense-pi-overlay.dts +++ /dev/null @@ -1,82 +0,0 @@ -// Definitions for audiosense add on soundcard -/dts-v1/; -/plugin/; -#include -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - codec_reg_1v8: codec-reg-1v8 { - compatible = "regulator-fixed"; - regulator-name = "tlv320aic3204_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - codec_rst: codec-rst { - brcm,pins = <26>; - brcm,function = ; - }; - }; - }; - - fragment@3 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - /* audio external oscillator */ - codec_osc: codec_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; /* 12 MHz */ - }; - - codec: tlv320aic32x4@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic32x4"; - reg = <0x18>; - - clocks = <&codec_osc>; - clock-names = "mclk"; - - iov-supply = <&vdd_3v3_reg>; - ldoin-supply = <&vdd_3v3_reg>; - - gpio-controller; - #gpio-cells = <2>; - reset-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; - - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&sound>; - __overlay__ { - compatible = "as,audiosense-pi"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/audremap-overlay.dts b/arch/arm64/boot/dts/overlays/audremap-overlay.dts deleted file mode 100644 index d624bb3a3feaf1f9abf90a5e0eb44b7a03806945..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/audremap-overlay.dts +++ /dev/null @@ -1,35 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&audio_pins>; - frag0: __overlay__ { - }; - }; - - fragment@1 { - target = <&audio_pins>; - __overlay__ { - brcm,pins = < 12 13 >; - brcm,function = < 4 >; /* alt0 alt0 */ - }; - }; - - fragment@2 { - target = <&audio_pins>; - __dormant__ { - brcm,pins = < 18 19 >; - brcm,function = < 2 >; /* alt5 alt5 */ - }; - }; - - __overrides__ { - swap_lr = <&frag0>, "swap_lr?"; - enable_jack = <&frag0>, "enable_jack?"; - pins_12_13 = <0>,"+1-2"; - pins_18_19 = <0>,"-1+2"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/balena-fin-overlay.dts b/arch/arm64/boot/dts/overlays/balena-fin-overlay.dts deleted file mode 100644 index 249c8202b2ed4ed4031994cd84789835ed53ab18..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/balena-fin-overlay.dts +++ /dev/null @@ -1,122 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmcnr>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - bus-width = <4>; - brcm,overclock-50 = <35>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - sdio_pins: sdio_pins { - brcm,pins = <34 35 36 37 38 39>; - brcm,function = <7>; /* ALT3 = SD1 */ - brcm,pull = <0 2 2 2 2 2>; - }; - - power_ctrl_pins: power_ctrl_pins { - brcm,pins = <40>; - brcm,function = <1>; // out - }; - }; - }; - - fragment@2 { - target-path = "/"; - __overlay__ { - // We should switch to mmc-pwrseq-sd8787 after making it - // compatible with sd8887 - // Currently that module requires two GPIOs to function since it - // targets a slightly different chip - power_ctrl: power_ctrl { - compatible = "gpio-poweroff"; - gpios = <&gpio 40 1>; - force; - pinctrl-names = "default"; - pinctrl-0 = <&power_ctrl_pins>; - }; - - i2c_soft: i2c@0 { - compatible = "i2c-gpio"; - gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>; - i2c-gpio,delay-us = <5>; - i2c-gpio,scl-open-drain; - i2c-gpio,sda-open-drain; - #address-cells = <1>; - #size-cells = <0>; - }; - - sd8xxx-wlan { - drvdbg = <0x6>; - drv_mode = <0x1>; - cfg80211_wext = <0xf>; - sta_name = "wlan"; - wfd_name = "p2p"; - cal_data_cfg = "none"; - }; - }; - }; - - fragment@3 { - target = <&i2c_soft>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - gpio_expander: gpio_expander@20 { - compatible = "nxp,pca9554"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - status = "okay"; - }; - - // rtc clock - ds1307: ds1307@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; - - // RGB LEDs (>= v1.1.0) - pca9633: pca9633@62 { - compatible = "nxp,pca9633"; - reg = <0x62>; - #address-cells = <1>; - #size-cells = <0>; - - red@0 { - label = "red"; - reg = <0>; - linux,default-trigger = "none"; - }; - green@1 { - label = "green"; - reg = <1>; - linux,default-trigger = "none"; - }; - blue@2 { - label = "blue"; - reg = <2>; - linux,default-trigger = "none"; - }; - unused@3 { - label = "unused"; - reg = <3>; - linux,default-trigger = "none"; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts b/arch/arm64/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts deleted file mode 100644 index 26dbbdd03ce5ae98c0ad5262cfc6e315d0cb4678..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts +++ /dev/null @@ -1,23 +0,0 @@ -// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - default-oversampling = <3>; - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dht11-overlay.dts b/arch/arm64/boot/dts/overlays/dht11-overlay.dts deleted file mode 100644 index 6feeeb402493eb70f695280ace1db73606dfc858..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dht11-overlay.dts +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Overlay for the DHT11/21/22 humidity/temperature sensor modules. - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - - dht11: dht11@0 { - compatible = "dht11"; - pinctrl-names = "default"; - pinctrl-0 = <&dht11_pins>; - gpios = <&gpio 4 0>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - dht11_pins: dht11_pins@0 { - brcm,pins = <4>; - brcm,function = <0>; // in - brcm,pull = <0>; // off - }; - }; - }; - - __overrides__ { - gpiopin = <&dht11_pins>,"brcm,pins:0", - <&dht11_pins>, "reg:0", - <&dht11>,"gpios:4", - <&dht11>,"reg:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dionaudio-loco-overlay.dts b/arch/arm64/boot/dts/overlays/dionaudio-loco-overlay.dts deleted file mode 100644 index d863e5c167cc951689799aaa406318bfc3b3f963..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dionaudio-loco-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -// Definitions for Dion Audio LOCO DAC-AMP - -/* - * PCM5242 DAC (in hardware mode) and TPA3118 AMP. - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - pcm5102a-codec { - #sound-dai-cells = <0>; - compatible = "ti,pcm5102a"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "dionaudio,loco-pcm5242-tpa3118"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dionaudio-loco-v2-overlay.dts b/arch/arm64/boot/dts/overlays/dionaudio-loco-v2-overlay.dts deleted file mode 100644 index dfb8922a654bb05df64b71fd59e2663638cf98d2..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Definitions for Dion Audio LOCO-V2 DAC-AMP - * eg. dtoverlay=dionaudio-loco-v2 - * - * PCM5242 DAC (in software mode) and TPA3255 AMP. - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; - frag0: __overlay__ { - compatible = "dionaudio,dionaudio-loco-v2"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - status = "okay"; - }; - }; - }; - - __overrides__ { - 24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/disable-bt-overlay.dts b/arch/arm64/boot/dts/overlays/disable-bt-overlay.dts deleted file mode 100644 index 2f1b655a133c389655f56443e654545bce2d85ee..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/disable-bt-overlay.dts +++ /dev/null @@ -1,55 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15. - To disable the systemd service that initialises the modem so it doesn't use - the UART: - - sudo systemctl disable hciuart -*/ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&uart0>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - }; - }; - - fragment@2 { - target = <&uart0_pins>; - __overlay__ { - brcm,pins; - brcm,function; - brcm,pull; - }; - }; - - fragment@3 { - target = <&bt_pins>; - __overlay__ { - brcm,pins; - brcm,function; - brcm,pull; - }; - }; - - fragment@4 { - target-path = "/aliases"; - __overlay__ { - serial0 = "/soc/serial@7e201000"; - serial1 = "/soc/serial@7e215040"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/disable-wifi-overlay.dts b/arch/arm64/boot/dts/overlays/disable-wifi-overlay.dts deleted file mode 100644 index 75e04646390002fc8caeca7ee9d04523bd8a7ad4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/disable-wifi-overlay.dts +++ /dev/null @@ -1,20 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&mmcnr>; - __overlay__ { - status = "disabled"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dpi18-overlay.dts b/arch/arm64/boot/dts/overlays/dpi18-overlay.dts deleted file mode 100644 index 4abe5be744db7acabd7446b1666600d2fbf17f4b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dpi18-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - // There is no DPI driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl - // reference on - leds will do - - fragment@0 { - target = <&fb>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi18_pins>; - }; - }; - - fragment@1 { - target = <&vc4>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi18_pins>; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - dpi18_pins: dpi18_pins { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 - 12 13 14 15 16 17 18 19 20 - 21>; - brcm,function = <6>; /* alt2 */ - brcm,pull = <0>; /* no pull */ - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dpi24-overlay.dts b/arch/arm64/boot/dts/overlays/dpi24-overlay.dts deleted file mode 100644 index 44335cc812770b4a650880b64fed684ab10af3aa..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dpi24-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - // There is no DPI driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl - // reference on - leds will do - - fragment@0 { - target = <&fb>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi24_pins>; - }; - }; - - fragment@1 { - target = <&vc4>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&dpi24_pins>; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - dpi24_pins: dpi24_pins { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 - 12 13 14 15 16 17 18 19 20 - 21 22 23 24 25 26 27>; - brcm,function = <6>; /* alt2 */ - brcm,pull = <0>; /* no pull */ - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/draws-overlay.dts b/arch/arm64/boot/dts/overlays/draws-overlay.dts deleted file mode 100644 index 32b665c3934b73e145847f49380659e959309121..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/draws-overlay.dts +++ /dev/null @@ -1,200 +0,0 @@ -#include -/* - * Device tree overlay for the DRAWS Hardware - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - udrc0_ldoin: udrc0_ldoin { - compatible = "regulator-fixed"; - regulator-name = "ldoin"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - - pps: pps { - compatible = "pps-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pps_pins>; - gpios = <&gpio 7 0>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tlv320aic32x4: tlv320aic32x4@18 { - compatible = "ti,tlv320aic32x4"; - reg = <0x18>; - #sound-dai-cells = <0>; - status = "okay"; - - clocks = <&clocks BCM2835_CLOCK_GP0>; - clock-names = "mclk"; - assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; - assigned-clock-rates = <25000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpclk0_pin &aic3204_reset>; - - reset-gpios = <&gpio 13 0>; - - iov-supply = <&udrc0_ldoin>; - ldoin-supply = <&udrc0_ldoin>; - }; - - sc16is752: sc16is752@50 { - compatible = "nxp,sc16is752"; - reg = <0x50>; - clocks = <&sc16is752_clk>; - interrupt-parent = <&gpio>; - interrupts = <17 2>; /* IRQ_TYPE_EDGE_FALLING */ - - pinctrl-names = "default"; - pinctrl-0 = <&sc16is752_irq>; - - sc16is752_clk: sc16is752_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1843200>; - }; - }; - - tla2024: tla2024@48 { - compatible = "ti,ads1015"; - reg = <0x48>; - #address-cells = <1>; - #size-cells = <0>; - - adc_ch4: channel@4 { - reg = <4>; - ti,gain = <1>; - ti,datarate = <4>; - }; - - adc_ch5: channel@5 { - reg = <5>; - ti,gain = <1>; - ti,datarate = <4>; - }; - - adc_ch6: channel@6 { - reg = <6>; - ti,gain = <2>; - ti,datarate = <4>; - }; - - adc_ch7: channel@7 { - reg = <7>; - ti,gain = <2>; - ti,datarate = <4>; - }; - }; - }; - }; - - fragment@3 { - target = <&sound>; - snd: __overlay__ { - compatible = "simple-audio-card"; - i2s-controller = <&i2s>; - status = "okay"; - - simple-audio-card,name = "draws"; - simple-audio-card,format = "i2s"; - - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - simple-audio-card,widgets = - "Line", "Line In", - "Line", "Line Out"; - - simple-audio-card,routing = - "IN1_R", "Line In", - "IN1_L", "Line In", - "CM_L", "Line In", - "CM_R", "Line In", - "Line Out", "LOR", - "Line Out", "LOL"; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic32x4>; - }; - }; - }; - - fragment@4 { - target = <&gpio>; - __overlay__ { - gpclk0_pin: gpclk0_pin { - brcm,pins = <4>; - brcm,function = <4>; - }; - - aic3204_reset: aic3204_reset { - brcm,pins = <13>; - brcm,function = <1>; - brcm,pull = <1>; - }; - - aic3204_gpio: aic3204_gpio { - brcm,pins = <26>; - }; - - sc16is752_irq: sc16is752_irq { - brcm,pins = <17>; - brcm,function = <0>; - brcm,pull = <2>; - }; - - pps_pins: pps_pins { - brcm,pins = <7>; - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - __overrides__ { - draws_adc_ch4_gain = <&adc_ch4>,"ti,gain:0"; - draws_adc_ch4_datarate = <&adc_ch4>,"ti,datarate:0"; - draws_adc_ch5_gain = <&adc_ch5>,"ti,gain:0"; - draws_adc_ch5_datarate = <&adc_ch5>,"ti,datarate:0"; - draws_adc_ch6_gain = <&adc_ch6>,"ti,gain:0"; - draws_adc_ch6_datarate = <&adc_ch6>,"ti,datarate:0"; - draws_adc_ch7_gain = <&adc_ch7>,"ti,gain:0"; - draws_adc_ch7_datarate = <&adc_ch7>,"ti,datarate:0"; - alsaname = <&snd>, "simple-audio-card,name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dwc-otg-overlay.dts b/arch/arm64/boot/dts/overlays/dwc-otg-overlay.dts deleted file mode 100644 index 78c5e9f850484b78db9d4e527c8437fe410df4cf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dwc-otg-overlay.dts +++ /dev/null @@ -1,14 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&usb>; - __overlay__ { - compatible = "brcm,bcm2708-usb"; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/dwc2-overlay.dts b/arch/arm64/boot/dts/overlays/dwc2-overlay.dts deleted file mode 100644 index 0d83e344ad97357a4bba2a45504bb54b50057bb1..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/dwc2-overlay.dts +++ /dev/null @@ -1,26 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; - dwc2_usb: __overlay__ { - compatible = "brcm,bcm2835-usb"; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; - g-rx-fifo-size = <558>; - g-tx-fifo-size = <512 512 512 512 512 256 256>; - status = "okay"; - }; - }; - - __overrides__ { - dr_mode = <&dwc2_usb>, "dr_mode"; - g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0"; - g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/enc28j60-overlay.dts b/arch/arm64/boot/dts/overlays/enc28j60-overlay.dts deleted file mode 100644 index 7af5c2e607ea0b464a8d8921d5b224437297dcaa..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/enc28j60-overlay.dts +++ /dev/null @@ -1,53 +0,0 @@ -// Overlay for the Microchip ENC28J60 Ethernet Controller -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - eth1: enc28j60@0{ - compatible = "microchip,enc28j60"; - reg = <0>; /* CE0 */ - pinctrl-names = "default"; - pinctrl-0 = <ð1_pins>; - interrupt-parent = <&gpio>; - interrupts = <25 0x2>; /* falling edge */ - spi-max-frequency = <12000000>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - eth1_pins: eth1_pins { - brcm,pins = <25>; - brcm,function = <0>; /* in */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - __overrides__ { - int_pin = <ð1>, "interrupts:0", - <ð1_pins>, "brcm,pins:0"; - speed = <ð1>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/enc28j60-spi2-overlay.dts b/arch/arm64/boot/dts/overlays/enc28j60-spi2-overlay.dts deleted file mode 100644 index 17cb5b8fa4852c02fac01da39c683aa49436f8fb..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/enc28j60-spi2-overlay.dts +++ /dev/null @@ -1,47 +0,0 @@ -// Overlay for the Microchip ENC28J60 Ethernet Controller - SPI2 Compute Module -// Interrupt pin: 39 -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi2>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - eth1: enc28j60@0{ - compatible = "microchip,enc28j60"; - reg = <0>; /* CE0 */ - pinctrl-names = "default"; - pinctrl-0 = <ð1_pins>; - interrupt-parent = <&gpio>; - interrupts = <39 0x2>; /* falling edge */ - spi-max-frequency = <12000000>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - eth1_pins: eth1_pins { - brcm,pins = <39>; - brcm,function = <0>; /* in */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - __overrides__ { - int_pin = <ð1>, "interrupts:0", - <ð1_pins>, "brcm,pins:0"; - speed = <ð1>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/exc3000-overlay.dts b/arch/arm64/boot/dts/overlays/exc3000-overlay.dts deleted file mode 100644 index 6f087fb206618f9dd5d21948efb38432bdcdc881..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/exc3000-overlay.dts +++ /dev/null @@ -1,48 +0,0 @@ -// Device tree overlay for I2C connected EETI EXC3000 multiple touch controller -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - exc3000_pins: exc3000_pins { - brcm,pins = <4>; // interrupt - brcm,function = <0>; // in - brcm,pull = <2>; // pull-up - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - exc3000: exc3000@2a { - compatible = "eeti,exc3000"; - reg = <0x2a>; - pinctrl-names = "default"; - pinctrl-0 = <&exc3000_pins>; - interrupt-parent = <&gpio>; - interrupts = <4 8>; // active low level-sensitive - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - }; - }; - }; - - __overrides__ { - interrupt = <&exc3000_pins>,"brcm,pins:0", - <&exc3000>,"interrupts:0"; - sizex = <&exc3000>,"touchscreen-size-x:0"; - sizey = <&exc3000>,"touchscreen-size-y:0"; - invx = <&exc3000>,"touchscreen-inverted-x?"; - invy = <&exc3000>,"touchscreen-inverted-y?"; - swapxy = <&exc3000>,"touchscreen-swapped-x-y?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/fe-pi-audio-overlay.dts b/arch/arm64/boot/dts/overlays/fe-pi-audio-overlay.dts deleted file mode 100644 index 1c3ec3e21a184236496daeb36926e4bff8ba7712..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/fe-pi-audio-overlay.dts +++ /dev/null @@ -1,70 +0,0 @@ -// Definitions for Fe-Pi Audio -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&clocks>; - __overlay__ { - sgtl5000_mclk: sgtl5000_mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - clock-output-names = "sgtl5000-mclk"; - }; - }; - }; - - fragment@1 { - target = <&soc>; - __overlay__ { - reg_1v8: reg_1v8@0 { - compatible = "regulator-fixed"; - regulator-name = "1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - sgtl5000@0a { - #sound-dai-cells = <0>; - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&sgtl5000_mclk>; - micbias-resistor-k-ohms = <2>; - micbias-voltage-m-volts = <3000>; - VDDA-supply = <&vdd_3v3_reg>; - VDDIO-supply = <&vdd_3v3_reg>; - VDDD-supply = <®_1v8>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@4 { - target = <&sound>; - __overlay__ { - compatible = "fe-pi,fe-pi-audio"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/goodix-overlay.dts b/arch/arm64/boot/dts/overlays/goodix-overlay.dts deleted file mode 100644 index 8571527de49a6e91c523a7db177e5d55ef9b731b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/goodix-overlay.dts +++ /dev/null @@ -1,46 +0,0 @@ -// Device tree overlay for I2C connected Goodix gt9271 multiple touch controller -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - goodix_pins: goodix_pins { - brcm,pins = <4 17>; // interrupt and reset - brcm,function = <0 0>; // in - brcm,pull = <2 2>; // pull-up - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - gt9271: gt9271@14 { - compatible = "goodix,gt9271"; - reg = <0x14>; - pinctrl-names = "default"; - pinctrl-0 = <&goodix_pins>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; // high-to-low edge triggered - irq-gpios = <&gpio 4 0>; // Pin7 on GPIO header - reset-gpios = <&gpio 17 0>; // Pin11 on GPIO header - }; - }; - }; - - __overrides__ { - interrupt = <&goodix_pins>,"brcm,pins:0", - <>9271>,"interrupts:0", - <>9271>,"irq-gpios:4"; - reset = <&goodix_pins>,"brcm,pins:4", - <>9271>,"reset-gpios:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts b/arch/arm64/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts deleted file mode 100644 index e443be1f9a0e73fbf038b86c716702b886973928..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -// Definitions for Google voiceHAT v1 soundcard overlay -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - googlevoicehat_pins: googlevoicehat_pins { - brcm,pins = <16>; - brcm,function = <1>; /* out */ - brcm,pull = <0>; /* up */ - }; - }; - }; - - - fragment@2 { - target-path = "/"; - __overlay__ { - voicehat-codec { - #sound-dai-cells = <0>; - compatible = "google,voicehat"; - pinctrl-names = "default"; - pinctrl-0 = <&googlevoicehat_pins>; - sdmode-gpios= <&gpio 16 0>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - __overlay__ { - compatible = "googlevoicehat,googlevoicehat-soundcard"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-fan-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-fan-overlay.dts deleted file mode 100644 index 0b14981b4824ef9eb988f86bc7eba2f39957e16d..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-fan-overlay.dts +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Overlay for the Raspberry Pi GPIO Fan @ BCM GPIO12. - * References: - * - https://www.raspberrypi.org/forums/viewtopic.php?f=107&p=1367135#p1365084 - * - * Optional parameters: - * - "gpiopin" - BCM number of the pin driving the fan, default 12 (GPIO12); - * - "temp" - CPU temperature at which fan is started in millicelsius, default 55000; - * - * Requires: - * - kernel configurations: CONFIG_SENSORS_GPIO_FAN=m; - * - kernel rebuild; - * - N-MOSFET connected to gpiopin, 2N7002-[https://en.wikipedia.org/wiki/2N7000]; - * - DC Fan connected to N-MOSFET Drain terminal, a 12V fan is working fine and quite silently; - * [https://www.tme.eu/en/details/ee40101s1-999-a/dc12v-fans/sunon/ee40101s1-1000u-999/] - * - * ┌─────────────────────┐ - * │Fan negative terminal│ - * └┬────────────────────┘ - * │D - * G │──┘ - * [GPIO12]──────┤ │<─┐ 2N7002 - * │──┤ - * │S - * ─┴─ - * GND - * - * Build: - * - `sudo dtc -W no-unit_address_vs_reg -@ -I dts -O dtb -o /boot/overlays/gpio-fan.dtbo gpio-fan-overlay.dts` - * Activate: - * - sudo nano /boot/config.txt add "dtoverlay=gpio-fan" or "dtoverlay=gpio-fan,gpiopin=12,temp=45000" - * or - * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Default\ndtoverlay=gpio-fan\n" >> /boot/config.txt' - * - sudo sh -c 'printf "\n# Enable PI GPIO-Fan Custom\ntoverlay=gpio-fan,gpiopin=12,temp=45000\n" >> /boot/config.txt' - * - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - fan0: gpio-fan@0 { - compatible = "gpio-fan"; - gpios = <&gpio 12 0>; - gpio-fan,speed-map = <0 0>, - <5000 1>; - #cooling-cells = <2>; - }; - }; - }; - - fragment@1 { - target = <&cpu_thermal>; - polling-delay = <2000>; /* milliseconds */ - __overlay__ { - trips { - cpu_hot: trip-point@0 { - temperature = <55000>; /* (millicelsius) Fan started at 55°C */ - hysteresis = <10000>; /* (millicelsius) Fan stopped at 45°C */ - type = "active"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu_hot>; - cooling-device = <&fan0 1 1>; - }; - }; - }; - }; - __overrides__ { - gpiopin = <&fan0>,"gpios:4", <&fan0>,"brcm,pins:0"; - temp = <&cpu_hot>,"temperature:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-ir-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-ir-overlay.dts deleted file mode 100644 index 162b6ce07dc91fdf36ad07ab18d9467012ce619d..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-ir-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -// Definitions for ir-gpio module -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - gpio_ir: ir-receiver@12 { - compatible = "gpio-ir-receiver"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_ir_pins>; - - // pin number, high or low - gpios = <&gpio 18 1>; - - // parameter for keymap name - linux,rc-map-name = "rc-rc6-mce"; - - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - gpio_ir_pins: gpio_ir_pins@12 { - brcm,pins = <18>; // pin 18 - brcm,function = <0>; // in - brcm,pull = <2>; // up - }; - }; - }; - - __overrides__ { - // parameters - gpio_pin = <&gpio_ir>,"gpios:4", // pin number - <&gpio_ir>,"reg:0", - <&gpio_ir_pins>,"brcm,pins:0", - <&gpio_ir_pins>,"reg:0"; - gpio_pull = <&gpio_ir_pins>,"brcm,pull:0"; // pull-up/down state - invert = <&gpio_ir>,"gpios:8"; // 0 = active high input - - rc-map-name = <&gpio_ir>,"linux,rc-map-name"; // default rc map - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-ir-tx-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-ir-tx-overlay.dts deleted file mode 100644 index 3625431b75604800e69b6aa6caeab810d82381d7..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-ir-tx-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - gpio_ir_tx_pins: gpio_ir_tx_pins@12 { - brcm,pins = <18>; - brcm,function = <1>; // out - }; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - gpio_ir_tx: gpio-ir-transmitter@12 { - compatible = "gpio-ir-tx"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_ir_tx_pins>; - gpios = <&gpio 18 0>; - }; - }; - }; - - __overrides__ { - gpio_pin = <&gpio_ir_tx>, "gpios:4", // pin number - <&gpio_ir_tx>, "reg:0", - <&gpio_ir_tx_pins>, "brcm,pins:0", - <&gpio_ir_tx_pins>, "reg:0"; - invert = <&gpio_ir_tx>, "gpios:8"; // 1 = active low - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-key-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-key-overlay.dts deleted file mode 100644 index 2e7253d1d0abf12dfd6cd059913ec90c50809687..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-key-overlay.dts +++ /dev/null @@ -1,48 +0,0 @@ -// Definitions for gpio-key module -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller - target = <&gpio>; - __overlay__ { - pin_state: button_pins@0 { - brcm,pins = <3>; // gpio number - brcm,function = <0>; // 0 = input, 1 = output - brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up - }; - }; - }; - fragment@1 { - target-path = "/"; - __overlay__ { - button: button@0 { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pin_state>; - status = "okay"; - - key: key { - linux,code = <116>; - gpios = <&gpio 3 1>; - label = "KEY_POWER"; - }; - }; - }; - }; - - __overrides__ { - gpio = <&key>,"gpios:4", - <&button>,"reg:0", - <&pin_state>,"brcm,pins:0", - <&pin_state>,"reg:0"; - label = <&key>,"label"; - keycode = <&key>,"linux,code:0"; - gpio_pull = <&pin_state>,"brcm,pull:0"; - active_low = <&key>,"gpios:8"; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts deleted file mode 100644 index 96cbe80820b72a961f701d21e6062ec67c95f161..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts +++ /dev/null @@ -1,14 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller - target = <&gpio>; - __overlay__ { - interrupts = <255 255>, <2 18>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-no-irq-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-no-irq-overlay.dts deleted file mode 100644 index 55f9bff3a8f62209a9e34e6d35ca97cbd6c84e91..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-no-irq-overlay.dts +++ /dev/null @@ -1,14 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller - target = <&gpio>; - __overlay__ { - interrupts; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-poweroff-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-poweroff-overlay.dts deleted file mode 100644 index 416aa2bc797a3d778b1045cedf2795f45470e87b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-poweroff-overlay.dts +++ /dev/null @@ -1,37 +0,0 @@ -// Definitions for gpio-poweroff module -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - power_ctrl: power_ctrl { - compatible = "gpio-poweroff"; - gpios = <&gpio 26 0>; - force; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - power_ctrl_pins: power_ctrl_pins { - brcm,pins = <26>; - brcm,function = <1>; // out - }; - }; - }; - - __overrides__ { - gpiopin = <&power_ctrl>,"gpios:4", - <&power_ctrl_pins>,"brcm,pins:0"; - active_low = <&power_ctrl>,"gpios:8"; - input = <&power_ctrl>,"input?"; - export = <&power_ctrl>,"export?"; - timeout_ms = <&power_ctrl>,"timeout-ms:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/gpio-shutdown-overlay.dts b/arch/arm64/boot/dts/overlays/gpio-shutdown-overlay.dts deleted file mode 100644 index db07ba67781d71011c665ae653ed3c3a2b22df92..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/gpio-shutdown-overlay.dts +++ /dev/null @@ -1,82 +0,0 @@ -// Definitions for gpio-poweroff module -/dts-v1/; -/plugin/; - -// This overlay sets up an input device that generates KEY_POWER events -// when a given GPIO pin changes. It defaults to using GPIO3, which can -// also be used to wake up (start) the Rpi again after shutdown. Since -// wakeup is active-low, this defaults to active-low with a pullup -// enabled, but all of this can be changed using overlay parameters (but -// note that GPIO3 has an external pullup on at least some boards). - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - // Configure the gpio pin controller - target = <&gpio>; - __overlay__ { - // Define a pinctrl state, that sets up the gpio - // as an input with a pullup enabled. This does - // not take effect by itself, only when referenced - // by a "pinctrl client", as is done below. See: - // https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - // https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt - pin_state: shutdown_button_pins { - brcm,pins = <3>; // gpio number - brcm,function = <0>; // 0 = input, 1 = output - brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up - }; - }; - }; - fragment@1 { - // Add a new device to the /soc devicetree node - target-path = "/soc"; - __overlay__ { - shutdown_button { - // Let the gpio-keys driver handle this device. See: - // https://www.kernel.org/doc/Documentation/devicetree/bindings/input/gpio-keys.txt - compatible = "gpio-keys"; - - // Declare a single pinctrl state (referencing the one declared above) and name it - // default, so it is activated automatically. - pinctrl-names = "default"; - pinctrl-0 = <&pin_state>; - - // Enable this device - status = "okay"; - - // Define a single key, called "shutdown" that monitors the gpio and sends KEY_POWER - // (keycode 116, see - // https://github.com/torvalds/linux/blob/v4.12/include/uapi/linux/input-event-codes.h#L190) - button: shutdown { - label = "shutdown"; - linux,code = <116>; // KEY_POWER - gpios = <&gpio 3 1>; - debounce-interval = <100>; // ms - }; - }; - }; - }; - - // This defines parameters that can be specified when loading - // the overlay. Each foo = line specifies one parameter, named - // foo. The rest of the specification gives properties where the - // parameter value is inserted into (changing the values above - // or adding new ones). - __overrides__ { - // Allow overriding the GPIO number. - gpio_pin = <&button>,"gpios:4", - <&pin_state>,"brcm,pins:0"; - - // Allow changing the internal pullup/down state. 0 = none, 1 = pulldown, 2 = pullup - // Note that GPIO3 and GPIO2 are the I2c pins and have an external pullup (at least - // on some boards). - gpio_pull = <&pin_state>,"brcm,pull:0"; - - // Allow setting the active_low flag. 0 = active high, 1 = active low - active_low = <&button>,"gpios:8"; - debounce = <&button>,"debounce-interval:0"; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/hd44780-lcd-overlay.dts b/arch/arm64/boot/dts/overlays/hd44780-lcd-overlay.dts deleted file mode 100644 index ee726669ff51122268ce826dccb6b3a4a4742d6a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hd44780-lcd-overlay.dts +++ /dev/null @@ -1,46 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - lcd_screen: auxdisplay { - compatible = "hit,hd44780"; - - data-gpios = <&gpio 6 0>, - <&gpio 13 0>, - <&gpio 19 0>, - <&gpio 26 0>; - enable-gpios = <&gpio 21 0>; - rs-gpios = <&gpio 20 0>; - - display-height-chars = <2>; - display-width-chars = <16>; - }; - - }; - }; - - fragment@1 { - target = <&lcd_screen>; - __dormant__ { - backlight-gpios = <&gpio 12 0>; - }; - }; - - __overrides__ { - pin_d4 = <&lcd_screen>,"data-gpios:4"; - pin_d5 = <&lcd_screen>,"data-gpios:16"; - pin_d6 = <&lcd_screen>,"data-gpios:28"; - pin_d7 = <&lcd_screen>,"data-gpios:40"; - pin_en = <&lcd_screen>,"enable-gpios:4"; - pin_rs = <&lcd_screen>,"rs-gpios:4"; - pin_bl = <0>,"+1", <&lcd_screen>,"backlight-gpios:4"; - display_height = <&lcd_screen>,"display-height-chars:0"; - display_width = <&lcd_screen>,"display-width-chars:0"; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts b/arch/arm64/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts deleted file mode 100644 index 50b9a2665c80bc91fd4c3ab64246161c5a238c02..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Devicetree overlay for GPIO based backlight on/off capability. - * - * Use this if you have one of those HDMI displays whose backlight cannot be - * controlled via DPMS over HDMI and plan to do a little soldering to use an - * RPi gpio pin for on/off switching. - * - * See: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)#Backlight_Control - * - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@1 { - target = <&gpio>; - __overlay__ { - hdmi_backlight_hwhack_gpio_pins: hdmi_backlight_hwhack_gpio_pins { - brcm,pins = <17>; - brcm,function = <1>; /* out */ - }; - }; - }; - - fragment@2 { - target-path = "/"; - __overlay__ { - hdmi_backlight_hwhack_gpio: hdmi_backlight_hwhack_gpio { - compatible = "gpio-backlight"; - - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_backlight_hwhack_gpio_pins>; - - gpios = <&gpio 17 0>; - default-on; - }; - }; - }; - - __overrides__ { - gpio_pin = <&hdmi_backlight_hwhack_gpio>,"gpios:4", - <&hdmi_backlight_hwhack_gpio_pins>,"brcm,pins:0"; - active_low = <&hdmi_backlight_hwhack_gpio>,"gpios:8"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-amp-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-amp-overlay.dts deleted file mode 100644 index 142518ab348b125d3108949b74706899d2b2b69c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-amp-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -// Definitions for HiFiBerry Amp/Amp+ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tas5713@1b { - #sound-dai-cells = <0>; - compatible = "ti,tas5713"; - reg = <0x1b>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "hifiberry,hifiberry-amp"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dac-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dac-overlay.dts deleted file mode 100644 index ea8a6c8f36c0a8762652736806f5e7aba169a827..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dac-overlay.dts +++ /dev/null @@ -1,34 +0,0 @@ -// Definitions for HiFiBerry DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - pcm5102a-codec { - #sound-dai-cells = <0>; - compatible = "ti,pcm5102a"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "hifiberry,hifiberry-dac"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dacplus-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dacplus-overlay.dts deleted file mode 100644 index 9d6b8ebdf11e2fd0bd3f60199e12d0ed4fa710d6..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dacplus-overlay.dts +++ /dev/null @@ -1,60 +0,0 @@ -// Definitions for HiFiBerry DAC+ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - dacpro_osc: dacpro_osc { - compatible = "hifiberry,dacpro-clk"; - #clock-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - clocks = <&dacpro_osc>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - hifiberry_dacplus: __overlay__ { - compatible = "hifiberry,hifiberry-dacplus"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = - <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; - leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts deleted file mode 100644 index 308a9b4df6f502c36d89b484fdb35ce4a477eef4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts +++ /dev/null @@ -1,72 +0,0 @@ -// Definitions for HiFiBerry DAC+ADC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - dacpro_osc: dacpro_osc { - compatible = "hifiberry,dacpro-clk"; - #clock-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm_codec: pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - clocks = <&dacpro_osc>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target-path = "/"; - __overlay__ { - dmic { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <2>; - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&sound>; - hifiberry_dacplusadc: __overlay__ { - compatible = "hifiberry,hifiberry-dacplusadc"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = - <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; - leds_off = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,leds_off?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts deleted file mode 100644 index 70a79bb1ec7dac2f0b97f12797ee11c710729baf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts +++ /dev/null @@ -1,65 +0,0 @@ -// Definitions for HiFiBerry DAC+ADC PRO -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - dacpro_osc: dacpro_osc { - compatible = "hifiberry,dacpro-clk"; - #clock-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - hb_dac: pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - clocks = <&dacpro_osc>; - status = "okay"; - }; - hb_adc: pcm186x@4a { - #sound-dai-cells = <0>; - compatible = "ti,pcm1863"; - reg = <0x4a>; - clocks = <&dacpro_osc>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - hifiberry_dacplusadcpro: __overlay__ { - compatible = "hifiberry,hifiberry-dacplusadcpro"; - audio-codec = <&hb_dac &hb_adc>; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = - <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; - slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; - leds_off = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,leds_off?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts deleted file mode 100644 index 63432e8b983fe878821f3ecf6a5b87846c175c10..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts +++ /dev/null @@ -1,34 +0,0 @@ -// Definitions for hifiberry DAC+DSP soundcard overlay -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - dacplusdsp-codec { - #sound-dai-cells = <0>; - compatible = "hifiberry,dacplusdsp"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-dacplushd-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-dacplushd-overlay.dts deleted file mode 100644 index 7bf0317ea83bd16d964ea2f53eec62c92cbbe510..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-dacplushd-overlay.dts +++ /dev/null @@ -1,106 +0,0 @@ -// Definitions for HiFiBerry DAC+ HD -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - dachd_osc: pll_dachd_osc { - compatible = "hifiberry,dachd-clk"; - #clock-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm1792a@4c { - compatible = "ti,pcm1792a"; - #sound-dai-cells = <0>; - #clock-cells = <0>; - clocks = <&dachd_osc>; - reg = <0x4c>; - status = "okay"; - }; - pll: pll@62 { - compatible = "hifiberry,dachd-clk"; - #clock-cells = <0>; - reg = <0x62>; - clocks = <&dachd_osc>; - status = "okay"; - common_pll_regs = [ - 02 53 03 00 07 20 0F 00 - 10 0D 11 1D 12 0D 13 8C - 14 8C 15 8C 16 8C 17 8C - 18 2A 1C 00 1D 0F 1F 00 - 2A 00 2C 00 2F 00 30 00 - 31 00 32 00 34 00 37 00 - 38 00 39 00 3A 00 3B 01 - 3E 00 3F 00 40 00 41 00 - 5A 00 5B 00 95 00 96 00 - 97 00 98 00 99 00 9A 00 - 9B 00 A2 00 A3 00 A4 00 - B7 92 ]; - 192k_pll_regs = [ - 1A 0C 1B 35 1E F0 20 09 - 21 50 2B 02 2D 10 2E 40 - 33 01 35 22 36 80 3C 22 - 3D 46 ]; - 96k_pll_regs = [ - 1A 0C 1B 35 1E F0 20 09 - 21 50 2B 02 2D 10 2E 40 - 33 01 35 47 36 00 3C 32 - 3D 46 ]; - 48k_pll_regs = [ - 1A 0C 1B 35 1E F0 20 09 - 21 50 2B 02 2D 10 2E 40 - 33 01 35 90 36 00 3C 42 - 3D 46 ]; - 176k4_pll_regs = [ - 1A 3D 1B 09 1E F3 20 13 - 21 75 2B 04 2D 11 2E E0 - 33 02 35 25 36 C0 3C 22 - 3D 7A ]; - 88k2_pll_regs = [ - 1A 3D 1B 09 1E F3 20 13 - 21 75 2B 04 2D 11 2E E0 - 33 01 35 4D 36 80 3C 32 - 3D 7A ]; - 44k1_pll_regs = [ - 1A 3D 1B 09 1E F3 20 13 - 21 75 2B 04 2D 11 2E E0 - 33 01 35 9D 36 00 3C 42 - 3D 7A ]; - }; - }; - }; - - fragment@3 { - target = <&sound>; - __overlay__ { - compatible = "hifiberry,hifiberry-dacplushd"; - i2s-controller = <&i2s>; - clocks = <&pll 0>; - reset-gpio = <&gpio 16 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-digi-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-digi-overlay.dts deleted file mode 100644 index a2309a50e8d86996cb3a4492387cae83ca50d8ce..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-digi-overlay.dts +++ /dev/null @@ -1,41 +0,0 @@ -// Definitions for HiFiBerry Digi -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "hifiberry,hifiberry-digi"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hifiberry-digi-pro-overlay.dts b/arch/arm64/boot/dts/overlays/hifiberry-digi-pro-overlay.dts deleted file mode 100644 index 83de602e76ba12881fc0f92d3103dd5fd8775fcd..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +++ /dev/null @@ -1,43 +0,0 @@ -// Definitions for HiFiBerry Digi Pro -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "hifiberry,hifiberry-digi"; - i2s-controller = <&i2s>; - status = "okay"; - clock44-gpio = <&gpio 5 0>; - clock48-gpio = <&gpio 6 0>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hy28a-overlay.dts b/arch/arm64/boot/dts/overlays/hy28a-overlay.dts deleted file mode 100644 index aa6463e6e7497dc811b37b5f4cf6096a043d7e39..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hy28a-overlay.dts +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Device Tree overlay for HY28A display - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - hy28a_pins: hy28a_pins { - brcm,pins = <17 25 18>; - brcm,function = <0 1 1>; /* in out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - hy28a: hy28a@0{ - compatible = "ilitek,ili9320"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hy28a_pins>; - - spi-max-frequency = <32000000>; - spi-cpol; - spi-cpha; - rotate = <270>; - bgr; - fps = <50>; - buswidth = <8>; - startbyte = <0x70>; - reset-gpios = <&gpio 25 0>; - led-gpios = <&gpio 18 1>; - debug = <0>; - }; - - hy28a_ts: hy28a-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <17 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 17 0>; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&hy28a>,"spi-max-frequency:0"; - rotate = <&hy28a>,"rotate:0"; - fps = <&hy28a>,"fps:0"; - debug = <&hy28a>,"debug:0"; - xohms = <&hy28a_ts>,"ti,x-plate-ohms;0"; - resetgpio = <&hy28a>,"reset-gpios:4", - <&hy28a_pins>, "brcm,pins:4"; - ledgpio = <&hy28a>,"led-gpios:4", - <&hy28a_pins>, "brcm,pins:8"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hy28b-2017-overlay.dts b/arch/arm64/boot/dts/overlays/hy28b-2017-overlay.dts deleted file mode 100644 index 42b68b684bd0ac3866470c40e8e51f5715794061..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hy28b-2017-overlay.dts +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Device Tree overlay for HY28b display shield by Texy. - * Modified for 2017 version with ILI9325 D chip - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - hy28b_pins: hy28b_pins { - brcm,pins = <17 25 18>; - brcm,function = <0 1 1>; /* in out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - hy28b: hy28b@0{ - compatible = "ilitek,ili9325"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hy28b_pins>; - - spi-max-frequency = <48000000>; - spi-cpol; - spi-cpha; - rotate = <270>; - bgr; - fps = <50>; - buswidth = <8>; - startbyte = <0x70>; - reset-gpios = <&gpio 25 0>; - led-gpios = <&gpio 18 1>; - - init = <0x10000e5 0x78F0 - 0x1000001 0x0100 - 0x1000002 0x0700 - 0x1000003 0x1030 - 0x1000004 0x0000 - 0x1000008 0x0207 - 0x1000009 0x0000 - 0x100000a 0x0000 - 0x100000c 0x0000 - 0x100000d 0x0000 - 0x100000f 0x0000 - 0x1000010 0x0000 - 0x1000011 0x0007 - 0x1000012 0x0000 - 0x1000013 0x0000 - 0x1000007 0x0001 - 0x2000032 - 0x2000032 - 0x2000032 - 0x2000032 - 0x1000010 0x1090 - 0x1000011 0x0227 - 0x2000032 - 0x1000012 0x001f - 0x2000032 - 0x1000013 0x1500 - 0x1000029 0x0027 - 0x100002b 0x000d - 0x2000032 - 0x1000020 0x0000 - 0x1000021 0x0000 - 0x2000032 - 0x1000030 0x0000 - 0x1000031 0x0707 - 0x1000032 0x0307 - 0x1000035 0x0200 - 0x1000036 0x0008 - 0x1000037 0x0004 - 0x1000038 0x0000 - 0x1000039 0x0707 - 0x100003c 0x0002 - 0x100003d 0x1d04 - 0x1000050 0x0000 - 0x1000051 0x00ef - 0x1000052 0x0000 - 0x1000053 0x013f - 0x1000060 0xa700 - 0x1000061 0x0001 - 0x100006a 0x0000 - 0x1000080 0x0000 - 0x1000081 0x0000 - 0x1000082 0x0000 - 0x1000083 0x0000 - 0x1000084 0x0000 - 0x1000085 0x0000 - 0x1000090 0x0010 - 0x1000092 0x0600 - 0x1000007 0x0133>; - debug = <0>; - }; - - hy28b_ts: hy28b-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <17 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 17 0>; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&hy28b>,"spi-max-frequency:0"; - rotate = <&hy28b>,"rotate:0"; - fps = <&hy28b>,"fps:0"; - debug = <&hy28b>,"debug:0"; - xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; - resetgpio = <&hy28b>,"reset-gpios:4", - <&hy28b_pins>, "brcm,pins:4"; - ledgpio = <&hy28b>,"led-gpios:4", - <&hy28b_pins>, "brcm,pins:8"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/hy28b-overlay.dts b/arch/arm64/boot/dts/overlays/hy28b-overlay.dts deleted file mode 100644 index 2e5e20f327a3c5c4be9729b467e841a21ae8d7cb..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/hy28b-overlay.dts +++ /dev/null @@ -1,148 +0,0 @@ -/* - * Device Tree overlay for HY28b display shield by Texy - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - hy28b_pins: hy28b_pins { - brcm,pins = <17 25 18>; - brcm,function = <0 1 1>; /* in out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - hy28b: hy28b@0{ - compatible = "ilitek,ili9325"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hy28b_pins>; - - spi-max-frequency = <48000000>; - spi-cpol; - spi-cpha; - rotate = <270>; - bgr; - fps = <50>; - buswidth = <8>; - startbyte = <0x70>; - reset-gpios = <&gpio 25 0>; - led-gpios = <&gpio 18 1>; - - gamma = "04 1F 4 7 7 0 7 7 6 0\n0F 00 1 7 4 0 0 0 6 7"; - - init = <0x10000e7 0x0010 - 0x1000000 0x0001 - 0x1000001 0x0100 - 0x1000002 0x0700 - 0x1000003 0x1030 - 0x1000004 0x0000 - 0x1000008 0x0207 - 0x1000009 0x0000 - 0x100000a 0x0000 - 0x100000c 0x0001 - 0x100000d 0x0000 - 0x100000f 0x0000 - 0x1000010 0x0000 - 0x1000011 0x0007 - 0x1000012 0x0000 - 0x1000013 0x0000 - 0x2000032 - 0x1000010 0x1590 - 0x1000011 0x0227 - 0x2000032 - 0x1000012 0x009c - 0x2000032 - 0x1000013 0x1900 - 0x1000029 0x0023 - 0x100002b 0x000e - 0x2000032 - 0x1000020 0x0000 - 0x1000021 0x0000 - 0x2000032 - 0x1000050 0x0000 - 0x1000051 0x00ef - 0x1000052 0x0000 - 0x1000053 0x013f - 0x1000060 0xa700 - 0x1000061 0x0001 - 0x100006a 0x0000 - 0x1000080 0x0000 - 0x1000081 0x0000 - 0x1000082 0x0000 - 0x1000083 0x0000 - 0x1000084 0x0000 - 0x1000085 0x0000 - 0x1000090 0x0010 - 0x1000092 0x0000 - 0x1000093 0x0003 - 0x1000095 0x0110 - 0x1000097 0x0000 - 0x1000098 0x0000 - 0x1000007 0x0133 - 0x1000020 0x0000 - 0x1000021 0x0000 - 0x2000064>; - debug = <0>; - }; - - hy28b_ts: hy28b-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <17 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 17 0>; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&hy28b>,"spi-max-frequency:0"; - rotate = <&hy28b>,"rotate:0"; - fps = <&hy28b>,"fps:0"; - debug = <&hy28b>,"debug:0"; - xohms = <&hy28b_ts>,"ti,x-plate-ohms;0"; - resetgpio = <&hy28b>,"reset-gpios:4", - <&hy28b_pins>, "brcm,pins:4"; - ledgpio = <&hy28b>,"led-gpios:4", - <&hy28b_pins>, "brcm,pins:8"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i-sabre-q2m-overlay.dts b/arch/arm64/boot/dts/overlays/i-sabre-q2m-overlay.dts deleted file mode 100644 index 0c4cff354674bb2a6b00c0e3fdf1f0f628fe8226..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i-sabre-q2m-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -// Definitions for I-Sabre Q2M -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; - frag0: __overlay__ { - compatible = "audiophonics,i-sabre-q2m"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - i-sabre-codec@48 { - #sound-dai-cells = <0>; - compatible = "audiophonics,i-sabre-codec"; - reg = <0x48>; - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-bcm2708-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-bcm2708-overlay.dts deleted file mode 100644 index 8204b6b3aef833c096ea2bb9faa6ceb208a19432..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-bcm2708-overlay.dts +++ /dev/null @@ -1,13 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - compatible = "brcm,bcm2708-i2c"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-gpio-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-gpio-overlay.dts deleted file mode 100644 index 39e7bc5fa9d8849f110d275dfd43806e5218e122..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-gpio-overlay.dts +++ /dev/null @@ -1,45 +0,0 @@ -// Overlay for i2c_gpio bitbanging host bus. -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - - __overlay__ { - i2c_gpio: i2c@0 { - reg = <0xffffffff>; - compatible = "i2c-gpio"; - gpios = <&gpio 23 0 /* sda */ - &gpio 24 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - fragment@1 { - target-path = "/aliases"; - __overlay__ { - i2c_gpio = "/i2c@0"; - }; - }; - - fragment@2 { - target-path = "/__symbols__"; - __overlay__ { - i2c_gpio = "/i2c@0"; - }; - }; - - __overrides__ { - i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; - i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; - i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; - bus = <&i2c_gpio>, "reg:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-mux-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-mux-overlay.dts deleted file mode 100644 index 112aed91ecb24f0fd35a8b63f9acb3b3bcd5c83b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-mux-overlay.dts +++ /dev/null @@ -1,139 +0,0 @@ -// Umbrella I2C Mux overlay - -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pca9542: mux@70 { - compatible = "nxp,pca9542"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - }; - }; - }; - - fragment@1 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pca9545: mux@70 { - compatible = "nxp,pca9545"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pca9548: mux@70 { - compatible = "nxp,pca9548"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; - }; - }; - - __overrides__ { - pca9542 = <0>, "+0"; - pca9545 = <0>, "+1"; - pca9548 = <0>, "+2"; - - addr = <&pca9542>,"reg:0", - <&pca9545>,"reg:0", - <&pca9548>,"reg:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts deleted file mode 100644 index 9bb16465a50e77de8720ff52fcfc7ecd0b331729..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +++ /dev/null @@ -1,26 +0,0 @@ -// Definitions for NXP PCA9685A I2C PWM controller on ARM I2C bus. -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pca: pca@40 { - compatible = "nxp,pca9685-pwm"; - #pwm-cells = <2>; - reg = <0x40>; - status = "okay"; - }; - }; - }; - __overrides__ { - addr = <&pca>,"reg:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-rtc-gpio-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-rtc-gpio-overlay.dts deleted file mode 100644 index 44df77459520b3c3862eedc6faa40546c0f80c86..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-rtc-gpio-overlay.dts +++ /dev/null @@ -1,244 +0,0 @@ -// Definitions for several I2C based Real Time Clocks -// Available through i2c-gpio -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - i2c_gpio: i2c-gpio-rtc@0 { - compatible = "i2c-gpio"; - gpios = <&gpio 23 0 /* sda */ - &gpio 24 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - }; - }; - }; - - fragment@1 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - abx80x: abx80x@69 { - compatible = "abracon,abx80x"; - reg = <0x69>; - abracon,tc-diode = "standard"; - abracon,tc-resistor = <0>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds1307: ds1307@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds1339: ds1339@68 { - compatible = "dallas,ds1339"; - trickle-resistor-ohms = <0>; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds3231: ds3231@68 { - compatible = "maxim,ds3231"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@5 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mcp7940x: mcp7940x@6f { - compatible = "microchip,mcp7940x"; - reg = <0x6f>; - status = "okay"; - }; - }; - }; - - fragment@6 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mcp7941x: mcp7941x@6f { - compatible = "microchip,mcp7941x"; - reg = <0x6f>; - status = "okay"; - }; - }; - }; - - fragment@7 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf2127@51 { - compatible = "nxp,pcf2127"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@8 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf8523: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@9 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@10 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - m41t62: m41t62@68 { - compatible = "st,m41t62"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@11 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - rv3028: rv3028@52 { - compatible = "microcrystal,rv3028"; - reg = <0x52>; - status = "okay"; - }; - }; - }; - - fragment@12 { - target = <&i2c_gpio>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf2129@51 { - compatible = "nxp,pcf2129"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - __overrides__ { - abx80x = <0>,"+1"; - ds1307 = <0>,"+2"; - ds1339 = <0>,"+3"; - ds3231 = <0>,"+4"; - mcp7940x = <0>,"+5"; - mcp7941x = <0>,"+6"; - pcf2127 = <0>,"+7"; - pcf8523 = <0>,"+8"; - pcf8563 = <0>,"+9"; - m41t62 = <0>,"+10"; - rv3028 = <0>,"+11"; - pcf2129 = <0>,"+12"; - - addr = <&abx80x>, "reg:0", - <&ds1307>, "reg:0", - <&ds1339>, "reg:0", - <&ds3231>, "reg:0", - <&mcp7940x>, "reg:0", - <&mcp7941x>, "reg:0", - <&pcf8523>, "reg:0", - <&pcf8563>, "reg:0", - <&m41t62>, "reg:0"; - - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", - <&abx80x>,"abracon,tc-resistor", - <&rv3028>,"trickle-resistor-ohms:0"; - backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; - wakeup-source = <&ds1339>,"wakeup-source?", - <&ds3231>,"wakeup-source?", - <&mcp7940x>,"wakeup-source?", - <&mcp7941x>,"wakeup-source?"; - i2c_gpio_sda = <&i2c_gpio>,"gpios:4"; - i2c_gpio_scl = <&i2c_gpio>,"gpios:16"; - i2c_gpio_delay_us = <&i2c_gpio>,"i2c-gpio,delay-us:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-rtc-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-rtc-overlay.dts deleted file mode 100644 index 5df390b52a7bb352353c8f8de1c313e5d032b63b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-rtc-overlay.dts +++ /dev/null @@ -1,241 +0,0 @@ -// Definitions for several I2C based Real Time Clocks -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - abx80x: abx80x@69 { - compatible = "abracon,abx80x"; - reg = <0x69>; - abracon,tc-diode = "standard"; - abracon,tc-resistor = <0>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds1307: ds1307@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds1339: ds1339@68 { - compatible = "dallas,ds1339"; - trickle-resistor-ohms = <0>; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds3231: ds3231@68 { - compatible = "maxim,ds3231"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mcp7940x: mcp7940x@6f { - compatible = "microchip,mcp7940x"; - reg = <0x6f>; - status = "okay"; - }; - }; - }; - - fragment@5 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mcp7941x: mcp7941x@6f { - compatible = "microchip,mcp7941x"; - reg = <0x6f>; - status = "okay"; - }; - }; - }; - - fragment@6 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf2127@51 { - compatible = "nxp,pcf2127"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@7 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf8523: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@8 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@9 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - m41t62: m41t62@68 { - compatible = "st,m41t62"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - fragment@10 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - rv3028: rv3028@52 { - compatible = "microcrystal,rv3028"; - reg = <0x52>; - status = "okay"; - }; - }; - }; - - fragment@11 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf2129@51 { - compatible = "nxp,pcf2129"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@12 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcf85363@51 { - compatible = "nxp,pcf85363"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - __overrides__ { - abx80x = <0>,"+0"; - ds1307 = <0>,"+1"; - ds1339 = <0>,"+2"; - ds3231 = <0>,"+3"; - mcp7940x = <0>,"+4"; - mcp7941x = <0>,"+5"; - pcf2127 = <0>,"+6"; - pcf8523 = <0>,"+7"; - pcf8563 = <0>,"+8"; - m41t62 = <0>,"+9"; - rv3028 = <0>,"+10"; - pcf2129 = <0>,"+11"; - pcf85363 = <0>,"+12"; - - addr = <&abx80x>, "reg:0", - <&ds1307>, "reg:0", - <&ds1339>, "reg:0", - <&ds3231>, "reg:0", - <&mcp7940x>, "reg:0", - <&mcp7941x>, "reg:0", - <&pcf8523>, "reg:0", - <&pcf8563>, "reg:0", - <&m41t62>, "reg:0"; - trickle-diode-type = <&abx80x>,"abracon,tc-diode"; - trickle-resistor-ohms = <&ds1339>,"trickle-resistor-ohms:0", - <&abx80x>,"abracon,tc-resistor", - <&rv3028>,"trickle-resistor-ohms:0"; - backup-switchover-mode = <&rv3028>,"backup-switchover-mode:0"; - wakeup-source = <&ds1339>,"wakeup-source?", - <&ds3231>,"wakeup-source?", - <&mcp7940x>,"wakeup-source?", - <&mcp7941x>,"wakeup-source?", - <&m41t62>,"wakeup-source?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm64/boot/dts/overlays/i2c-sensor-overlay.dts deleted file mode 100644 index 40881d72a15743d8fe826d5890b50b0f5c554668..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c-sensor-overlay.dts +++ /dev/null @@ -1,256 +0,0 @@ -// Definitions for I2C based sensors using the Industrial IO or HWMON interface. -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bme280: bme280@76 { - compatible = "bosch,bme280"; - reg = <0x76>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bmp085: bmp085@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - default-oversampling = <3>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bmp180: bmp180@77 { - compatible = "bosch,bmp180"; - reg = <0x77>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bmp280: bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - htu21: htu21@40 { - compatible = "htu21"; - reg = <0x40>; - status = "okay"; - }; - }; - }; - - fragment@5 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - lm75: lm75@4f { - compatible = "lm75"; - reg = <0x4f>; - status = "okay"; - }; - }; - }; - - fragment@6 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - si7020: si7020@40 { - compatible = "si7020"; - reg = <0x40>; - status = "okay"; - }; - }; - }; - - fragment@7 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tmp102: tmp102@48 { - compatible = "ti,tmp102"; - reg = <0x48>; - status = "okay"; - }; - }; - }; - - fragment@8 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - hdc100x: hdc100x@40 { - compatible = "hdc100x"; - reg = <0x40>; - status = "okay"; - }; - }; - }; - - fragment@9 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tsl4531: tsl4531@29 { - compatible = "tsl4531"; - reg = <0x29>; - status = "okay"; - }; - }; - }; - - fragment@10 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - veml6070: veml6070@38 { - compatible = "veml6070"; - reg = <0x38>; - status = "okay"; - }; - }; - }; - - fragment@11 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - sht3x: sht3x@44 { - compatible = "sht3x"; - reg = <0x44>; - status = "okay"; - }; - }; - }; - - fragment@12 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ds1621: ds1621@48 { - compatible = "ds1621"; - reg = <0x48>; - status = "okay"; - }; - }; - }; - - fragment@13 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max17040: max17040@36 { - compatible = "maxim,max17040"; - reg = <0x36>; - status = "okay"; - }; - }; - }; - - fragment@14 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - bme680: bme680@76 { - compatible = "bosch,bme680"; - reg = <0x76>; - status = "okay"; - }; - }; - }; - - - __overrides__ { - addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", - <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", - <&ds1621>,"reg:0", <&bme680>,"reg:0"; - bme280 = <0>,"+0"; - bmp085 = <0>,"+1"; - bmp180 = <0>,"+2"; - bmp280 = <0>,"+3"; - htu21 = <0>,"+4"; - lm75 = <0>,"+5"; - lm75addr = <&lm75>,"reg:0"; - si7020 = <0>,"+6"; - tmp102 = <0>,"+7"; - hdc100x = <0>,"+8"; - tsl4531 = <0>,"+9"; - veml6070 = <0>,"+10"; - sht3x = <0>,"+11"; - ds1621 = <0>,"+12"; - max17040 = <0>,"+13"; - bme680 = <0>,"+14"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c0-bcm2708-overlay.dts b/arch/arm64/boot/dts/overlays/i2c0-bcm2708-overlay.dts deleted file mode 100644 index 02f7dca9b71e621f2afb9c5866512bc379d2fe67..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c0-bcm2708-overlay.dts +++ /dev/null @@ -1,14 +0,0 @@ -#include "i2c0-overlay.dts" - -/{ - __overrides__ { - sda0_pin = <&pins1>,"brcm,pins:0", - <&pins2>,"brcm,pins:0", - <&pins3>,"brcm,pins:0", - <&pins4>,"brcm,pins:0"; - scl0_pin = <&pins1>,"brcm,pins:4", - <&pins2>,"brcm,pins:4", - <&pins3>,"brcm,pins:4", - <&pins4>,"brcm,pins:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c0-overlay.dts b/arch/arm64/boot/dts/overlays/i2c0-overlay.dts deleted file mode 100644 index 6b1f9ec6c878206b39115eb75868af8b64b13b62..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c0-overlay.dts +++ /dev/null @@ -1,61 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c0>; - __overlay__ { - status = "okay"; - pinctrl-0 = <&i2c0_pins>; - }; - }; - - fragment@1 { - target = <&i2c0_pins>; - pins1: __overlay__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - - fragment@2 { - target = <&i2c0_pins>; - pins2: __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - }; - - fragment@3 { - target = <&i2c0_pins>; - pins3: __dormant__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - - fragment@4 { - target = <&i2c0_pins>; - pins4: __dormant__ { - brcm,pins = <46 47>; - brcm,function = <4>; /* alt0 */ - }; - }; - - fragment@5 { - target = <&i2c0>; - __dormant__ { - compatible = "brcm,bcm2708-i2c"; - }; - }; - - __overrides__ { - pins_0_1 = <0>,"+1-2-3-4"; - pins_28_29 = <0>,"-1+2-3-4"; - pins_44_45 = <0>,"-1-2+3-4"; - pins_46_47 = <0>,"-1-2-3+4"; - combine = <0>, "!5"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c1-bcm2708-overlay.dts b/arch/arm64/boot/dts/overlays/i2c1-bcm2708-overlay.dts deleted file mode 100644 index 09d8b16a6256d3b40b9a45e6ea581b8f5483dd95..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c1-bcm2708-overlay.dts +++ /dev/null @@ -1,9 +0,0 @@ -#include "i2c1-overlay.dts" - -/{ - __overrides__ { - sda1_pin = <&pins1>,"brcm,pins:0", <&pins2>,"brcm,pins:0"; - scl1_pin = <&pins1>,"brcm,pins:4", <&pins1>,"brcm,pins:4"; - pin_func = <&pins1>,"brcm,function:0", <&pins2>,"brcm,function:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c1-overlay.dts b/arch/arm64/boot/dts/overlays/i2c1-overlay.dts deleted file mode 100644 index addaed73e66566a93f162bfbb50cb3f1af110823..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c1-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - }; - }; - - fragment@1 { - target = <&i2c1_pins>; - pins1: __overlay__ { - brcm,pins = <2 3>; - brcm,function = <4>; /* alt 0 */ - }; - }; - - fragment@2 { - target = <&i2c1_pins>; - pins2: __dormant__ { - brcm,pins = <44 45>; - brcm,function = <6>; /* alt 2 */ - }; - }; - - fragment@3 { - target = <&i2c1>; - __dormant__ { - compatible = "brcm,bcm2708-i2c"; - }; - }; - - __overrides__ { - pins_2_3 = <0>,"=1!2"; - pins_44_45 = <0>,"!1=2"; - combine = <0>, "!3"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c3-overlay.dts b/arch/arm64/boot/dts/overlays/i2c3-overlay.dts deleted file mode 100644 index e24a1df21f99107bd4044d0e3bc538f21f6c2375..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c3-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&i2c3>; - frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - }; - }; - - fragment@1 { - target = <&i2c3_pins>; - __dormant__ { - brcm,pins = <2 3>; - }; - }; - - fragment@2 { - target = <&i2c3_pins>; - __overlay__ { - brcm,pins = <4 5>; - }; - }; - - __overrides__ { - pins_2_3 = <0>,"=1!2"; - pins_4_5 = <0>,"!1=2"; - baudrate = <&frag0>, "clock-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c4-overlay.dts b/arch/arm64/boot/dts/overlays/i2c4-overlay.dts deleted file mode 100644 index 14c7f4d1da4c72ed93779f7344c5e2ed5d1ef9c3..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c4-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&i2c4>; - frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; - clock-frequency = <100000>; - }; - }; - - fragment@1 { - target = <&i2c4_pins>; - __dormant__ { - brcm,pins = <6 7>; - }; - }; - - fragment@2 { - target = <&i2c4_pins>; - __overlay__ { - brcm,pins = <8 9>; - }; - }; - - __overrides__ { - pins_6_7 = <0>,"=1!2"; - pins_8_9 = <0>,"!1=2"; - baudrate = <&frag0>, "clock-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c5-overlay.dts b/arch/arm64/boot/dts/overlays/i2c5-overlay.dts deleted file mode 100644 index 7953621112ded14e77411c7f43e72e6cc1544dd3..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c5-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&i2c5>; - frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - clock-frequency = <100000>; - }; - }; - - fragment@1 { - target = <&i2c5_pins>; - __dormant__ { - brcm,pins = <10 11>; - }; - }; - - fragment@2 { - target = <&i2c5_pins>; - __overlay__ { - brcm,pins = <12 13>; - }; - }; - - __overrides__ { - pins_10_11 = <0>,"=1!2"; - pins_12_13 = <0>,"!1=2"; - baudrate = <&frag0>, "clock-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2c6-overlay.dts b/arch/arm64/boot/dts/overlays/i2c6-overlay.dts deleted file mode 100644 index 555305a7ee1fd60101103ad04d12a1c00c3467e8..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2c6-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&i2c6>; - frag0: __overlay__ { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - clock-frequency = <100000>; - }; - }; - - fragment@1 { - target = <&i2c6_pins>; - __dormant__ { - brcm,pins = <0 1>; - }; - }; - - fragment@2 { - target = <&i2c6_pins>; - __overlay__ { - brcm,pins = <22 23>; - }; - }; - - __overrides__ { - pins_0_1 = <0>,"=1!2"; - pins_22_23 = <0>,"!1=2"; - baudrate = <&frag0>, "clock-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/i2s-gpio28-31-overlay.dts b/arch/arm64/boot/dts/overlays/i2s-gpio28-31-overlay.dts deleted file mode 100644 index cf43094c6ff4565cc210f219aacc5939281974a0..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/i2s-gpio28-31-overlay.dts +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Device tree overlay to move i2s to gpio 28 to 31 on CM - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s_pins>; - __overlay__ { - brcm,pins = <28 29 30 31>; - brcm,function = <6>; /* alt2 */ - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ilitek251x-overlay.dts b/arch/arm64/boot/dts/overlays/ilitek251x-overlay.dts deleted file mode 100644 index 551aba591d263d16f47b9438028afefdcb410cca..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ilitek251x-overlay.dts +++ /dev/null @@ -1,45 +0,0 @@ -// Device tree overlay for I2C connected Ilitek multiple touch controller -/dts-v1/; -/plugin/; - - / { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - ili251x_pins: ili251x_pins { - brcm,pins = <4>; // interrupt - brcm,function = <0>; // in - brcm,pull = <2>; // pull-up // - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ili251x: ili251x@41 { - compatible = "ilitek,ili251x"; - reg = <0x41>; - pinctrl-names = "default"; - pinctrl-0 = <&ili251x_pins>; - interrupt-parent = <&gpio>; - interrupts = <4 8>; // high-to-low edge triggered - touchscreen-size-x = <16384>; - touchscreen-size-y = <9600>; - }; - }; - }; - - __overrides__ { - interrupt = <&ili251x_pins>,"brcm,pins:0", - <&ili251x>,"interrupts:0"; - sizex = <&ili251x>,"touchscreen-size-x:0"; - sizey = <&ili251x>,"touchscreen-size-y:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/imx219-overlay.dts b/arch/arm64/boot/dts/overlays/imx219-overlay.dts deleted file mode 100644 index 2a1500d07b680027c3c9db01fa798d71a630c103..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/imx219-overlay.dts +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for IMX219 camera module on VC I2C bus -/dts-v1/; -/plugin/; - -#include - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - imx219: imx219@10 { - compatible = "sony,imx219"; - reg = <0x10>; - status = "okay"; - - clocks = <&imx219_clk>; - clock-names = "xclk"; - - VANA-supply = <&imx219_vana>; /* 2.8v */ - VDIG-supply = <&imx219_vdig>; /* 1.8v */ - VDDL-supply = <&imx219_vddl>; /* 1.2v */ - - imx219_clk: camera-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - - port { - imx219_0: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - data-lanes = <1 2>; - clock-noncontinuous; - link-frequencies = - /bits/ 64 <297000000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&csi1>; - __overlay__ { - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&imx219_0>; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@3 { - target = <&i2c0_pins>; - __overlay__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - fragment@4 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@6 { - target-path="/"; - __overlay__ { - imx219_vana: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "imx219_vana"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio 41 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - imx219_vdig: fixedregulator@1 { - compatible = "regulator-fixed"; - regulator-name = "imx219_vdig"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - imx219_vddl: fixedregulator@2 { - compatible = "regulator-fixed"; - regulator-name = "imx219_vddl"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - }; - }; - - fragment@7 { - target-path="/__overrides__"; - __overlay__ { - cam0-pwdn-ctrl = <&imx219_vana>,"gpio:0"; - cam0-pwdn = <&imx219_vana>,"gpio:4"; - }; - }; - - __overrides__ { - i2c_pins_0_1 = <0>,"-2-3+4"; - i2c_pins_28_29 = <0>,"+2-3-4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/iqaudio-codec-overlay.dts b/arch/arm64/boot/dts/overlays/iqaudio-codec-overlay.dts deleted file mode 100644 index 9110f5d34298847aa71d90c0cffddbb2bfce31e4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/iqaudio-codec-overlay.dts +++ /dev/null @@ -1,42 +0,0 @@ -// Definitions for IQaudIO CODEC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - da2713@1a { - #sound-dai-cells = <0>; - compatible = "dlg,da7213"; - reg = <0x1a>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - iqaudio_dac: __overlay__ { - compatible = "iqaudio,iqaudio-codec"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - }; -}; diff --git a/arch/arm64/boot/dts/overlays/iqaudio-dac-overlay.dts b/arch/arm64/boot/dts/overlays/iqaudio-dac-overlay.dts deleted file mode 100644 index 24073cadd0effd40f6cc66cd32e09686cd8dfbba..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/iqaudio-dac-overlay.dts +++ /dev/null @@ -1,46 +0,0 @@ -// Definitions for IQaudIO DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - frag2: __overlay__ { - compatible = "iqaudio,iqaudio-dac"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/iqaudio-dacplus-overlay.dts b/arch/arm64/boot/dts/overlays/iqaudio-dacplus-overlay.dts deleted file mode 100644 index 7c70b25e58d7547a4de77a9e96ac83a5367226c2..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/iqaudio-dacplus-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -// Definitions for IQaudIO DAC+ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4c { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4c>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - iqaudio_dac: __overlay__ { - compatible = "iqaudio,iqaudio-dac"; - i2s-controller = <&i2s>; - mute-gpios = <&gpio 22 0>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&iqaudio_dac>,"iqaudio,24db_digital_gain?"; - auto_mute_amp = <&iqaudio_dac>,"iqaudio-dac,auto-mute-amp?"; - unmute_amp = <&iqaudio_dac>,"iqaudio-dac,unmute-amp?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts b/arch/arm64/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts deleted file mode 100644 index ee54095c869be392813395d76464e9810b914bd4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +++ /dev/null @@ -1,47 +0,0 @@ -// Definitions for IQAudIO Digi WM8804 audio board -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - status = "okay"; - DVDD-supply = <&vdd_3v3_reg>; - PVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; - - fragment@2 { - target = <&sound>; - wm8804_digi: __overlay__ { - compatible = "iqaudio,wm8804-digi"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - card_name = <&wm8804_digi>,"wm8804-digi,card-name"; - dai_name = <&wm8804_digi>,"wm8804-digi,dai-name"; - dai_stream_name = <&wm8804_digi>,"wm8804-digi,dai-stream-name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/irs1125-overlay.dts b/arch/arm64/boot/dts/overlays/irs1125-overlay.dts deleted file mode 100644 index b9006715a5397a250dc346ff060df73c4766a3e4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/irs1125-overlay.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for IRS1125 camera module on VC I2C bus -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - irs1125: irs1125@3D { - compatible = "infineon,irs1125"; - reg = <0x3D>; - status = "okay"; - - pwdn-gpios = <&gpio 5 0>; - clocks = <&irs1125_clk>; - - irs1125_clk: camera-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - }; - - port { - irs1125_0: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - data-lanes = <1 2>; - clock-noncontinuous; - link-frequencies = - /bits/ 64 <297000000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&csi1>; - __overlay__ { - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&irs1125_0>; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@3 { - target = <&i2c0_pins>; - __overlay__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - fragment@4 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@6 { - target-path="/__overrides__"; - __overlay__ { - cam0-pwdn-ctrl = <&irs1125>,"pwdn-gpios:0"; - cam0-pwdn = <&irs1125>,"pwdn-gpios:4"; - }; - }; - - __overrides__ { - i2c_pins_0_1 = <0>,"-2-3+4"; - i2c_pins_28_29 = <0>,"+2-3-4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/jedec-spi-nor-overlay.dts b/arch/arm64/boot/dts/overlays/jedec-spi-nor-overlay.dts deleted file mode 100644 index 585c7dbcdf7f59709eff2b339b6ab63e1c49a580..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/jedec-spi-nor-overlay.dts +++ /dev/null @@ -1,309 +0,0 @@ -// Overlay for JEDEC SPI-NOR Flash Devices (aka m25p80) - -// dtparams: -// flash-spi- - Enables flash device on SPI, CS#. -// flash-fastr-spi- - Enables flash device with fast read capability on SPI, CS#. -// -// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -// -// Example: A single flash device with fast read capability on SPI0, CS#0: -// dtoverlay=jedec-spi-nor:flash-fastr-spi0-0 - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - // disable spi-dev on spi0.0 - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi0.1 - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.0 - fragment@2 { - target-path = "spi1/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.1 - fragment@3 { - target-path = "spi1/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.2 - fragment@4 { - target-path = "spi1/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.0 - fragment@5 { - target-path = "spi2/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.1 - fragment@6 { - target-path = "spi2/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.2 - fragment@7 { - target-path = "spi2/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - // enable flash on spi0.0 - fragment@8 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_00: spi_nor@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi0.1 - fragment@9 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_01: spi_nor@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi1.0 - fragment@10 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_10: spi_nor@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi1.1 - fragment@11 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_11: spi_nor@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi1.2 - fragment@12 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_12: spi_nor@2 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <2>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi2.0 - fragment@13 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_20: spi_nor@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi2.1 - fragment@14 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_21: spi_nor@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <1>; - spi-max-frequency = <500000>; - }; - }; - }; - - // enable flash on spi2.2 - fragment@15 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - spi_nor_22: spi_nor@2 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <2>; - spi-max-frequency = <500000>; - }; - }; - }; - - // Enable fast read for device on spi0.0. - // Use default active low interrupt signalling. - fragment@16 { - target = <&spi_nor_00>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi0.1. - // Use default active low interrupt signalling. - fragment@17 { - target = <&spi_nor_01>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi1.0. - // Use default active low interrupt signalling. - fragment@18 { - target = <&spi_nor_10>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi1.1. - // Use default active low interrupt signalling. - fragment@19 { - target = <&spi_nor_11>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi1.2. - // Use default active low interrupt signalling. - fragment@20 { - target = <&spi_nor_12>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi2.0. - // Use default active low interrupt signalling. - fragment@21 { - target = <&spi_nor_20>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi2.1. - // Use default active low interrupt signalling. - fragment@22 { - target = <&spi_nor_21>; - __dormant__ { - m25p,fast-read; - }; - }; - - // Enable fast read for device on spi2.2. - // Use default active low interrupt signalling. - fragment@23 { - target = <&spi_nor_22>; - __dormant__ { - m25p,fast-read; - }; - }; - - __overrides__ { - flash-spi0-0 = <0>,"+0+8"; - flash-spi0-1 = <0>,"+1+9"; - flash-spi1-0 = <0>,"+2+10"; - flash-spi1-1 = <0>,"+3+11"; - flash-spi1-2 = <0>,"+4+12"; - flash-spi2-0 = <0>,"+5+13"; - flash-spi2-1 = <0>,"+6+14"; - flash-spi2-2 = <0>,"+7+15"; - flash-fastr-spi0-0 = <0>,"+0+8+16"; - flash-fastr-spi0-1 = <0>,"+1+9+17"; - flash-fastr-spi1-0 = <0>,"+2+10+18"; - flash-fastr-spi1-1 = <0>,"+3+11+19"; - flash-fastr-spi1-2 = <0>,"+4+12+20"; - flash-fastr-spi2-0 = <0>,"+5+13+21"; - flash-fastr-spi2-1 = <0>,"+6+14+22"; - flash-fastr-spi2-2 = <0>,"+7+15+23"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/justboom-both-overlay.dts b/arch/arm64/boot/dts/overlays/justboom-both-overlay.dts deleted file mode 100644 index 9c42670631c0e604c67c793eb0d4b6114996350e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/justboom-both-overlay.dts +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Definitions for JustBoom Both (Digi+DAC) -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&sound>; - frag3: __overlay__ { - compatible = "justboom,justboom-both"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&frag3>,"justboom,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/justboom-dac-overlay.dts b/arch/arm64/boot/dts/overlays/justboom-dac-overlay.dts deleted file mode 100644 index d00515dca41937b7b89dcc3e8be8c23e50083081..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/justboom-dac-overlay.dts +++ /dev/null @@ -1,46 +0,0 @@ -// Definitions for JustBoom DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - pcm5122@4d { - #sound-dai-cells = <0>; - compatible = "ti,pcm5122"; - reg = <0x4d>; - AVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - frag2: __overlay__ { - compatible = "justboom,justboom-dac"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; - - __overrides__ { - 24db_digital_gain = <&frag2>,"justboom,24db_digital_gain?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/justboom-digi-overlay.dts b/arch/arm64/boot/dts/overlays/justboom-digi-overlay.dts deleted file mode 100644 index e73336029c54481645c1ff3cf7c0a5d93c607df6..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/justboom-digi-overlay.dts +++ /dev/null @@ -1,41 +0,0 @@ -// Definitions for JustBoom Digi -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "justboom,justboom-digi"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ltc294x-overlay.dts b/arch/arm64/boot/dts/overlays/ltc294x-overlay.dts deleted file mode 100644 index 6d971f3649ca5bb4c1563d005549e2b043bcbb26..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ltc294x-overlay.dts +++ /dev/null @@ -1,86 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ltc2941: ltc2941@64 { - compatible = "lltc,ltc2941"; - reg = <0x64>; - lltc,resistor-sense = <50>; - lltc,prescaler-exponent = <7>; - }; - }; - }; - - fragment@1 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ltc2942: ltc2942@64 { - compatible = "lltc,ltc2942"; - reg = <0x64>; - lltc,resistor-sense = <50>; - lltc,prescaler-exponent = <7>; - }; - }; - }; - - fragment@2 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ltc2943: ltc2943@64 { - compatible = "lltc,ltc2943"; - reg = <0x64>; - lltc,resistor-sense = <50>; - lltc,prescaler-exponent = <7>; - }; - }; - }; - - fragment@3 { - target = <&i2c_arm>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ltc2944: ltc2944@64 { - compatible = "lltc,ltc2944"; - reg = <0x64>; - lltc,resistor-sense = <50>; - lltc,prescaler-exponent = <7>; - }; - }; - }; - - __overrides__ { - ltc2941 = <0>,"+0"; - ltc2942 = <0>,"+1"; - ltc2943 = <0>,"+2"; - ltc2944 = <0>,"+3"; - resistor-sense = <<c2941>, "lltc,resistor-sense:0", - <<c2942>, "lltc,resistor-sense:0", - <<c2943>, "lltc,resistor-sense:0", - <<c2944>, "lltc,resistor-sense:0"; - prescaler-exponent = <<c2941>, "lltc,prescaler-exponent:0", - <<c2942>, "lltc,prescaler-exponent:0", - <<c2943>, "lltc,prescaler-exponent:0", - <<c2944>, "lltc,prescaler-exponent:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/max98357a-overlay.dts b/arch/arm64/boot/dts/overlays/max98357a-overlay.dts deleted file mode 100644 index 9e2afb05b7cb5610b4f7b8dda7dd90336f8868e2..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/max98357a-overlay.dts +++ /dev/null @@ -1,84 +0,0 @@ -// Overlay for Maxim MAX98357A audio DAC - -// dtparams: -// no-sdmode - SD_MODE pin not managed by driver. -// sdmode-pin - Specify GPIO pin to which SD_MODE is connected (default 4). - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - /* Enable I2S */ - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - /* DAC whose SD_MODE pin is managed by driver (via GPIO pin) */ - fragment@1 { - target-path = "/"; - __overlay__ { - max98357a_dac: max98357a { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - sdmode-gpios = <&gpio 4 0>; /* 2nd word overwritten by sdmode-pin parameter */ - status = "okay"; - }; - }; - }; - - /* DAC whose SD_MODE pin is not managed by driver */ - fragment@2 { - target-path = "/"; - __dormant__ { - max98357a_nsd: max98357a { - compatible = "maxim,max98357a"; - #sound-dai-cells = <0>; - status = "okay"; - }; - }; - }; - - /* Soundcard connecting I2S to DAC with SD_MODE */ - fragment@3 { - target = <&sound>; - __overlay__ { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "MAX98357A"; - status = "okay"; - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - simple-audio-card,codec { - sound-dai = <&max98357a_dac>; - }; - }; - }; - - /* Soundcard connecting I2S to DAC without SD_MODE */ - fragment@4 { - target = <&sound>; - __dormant__ { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "MAX98357A"; - status = "okay"; - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - simple-audio-card,codec { - sound-dai = <&max98357a_nsd>; - }; - }; - }; - - __overrides__ { - no-sdmode = <0>,"-1+2-3+4"; - sdmode-pin = <&max98357a_dac>,"sdmode-gpios:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mbed-dac-overlay.dts b/arch/arm64/boot/dts/overlays/mbed-dac-overlay.dts deleted file mode 100644 index 840dd9b31db41a221bec750d762585d08cb65a13..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mbed-dac-overlay.dts +++ /dev/null @@ -1,64 +0,0 @@ -// Definitions for mbed DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tlv320aic23: codec@1a { - #sound-dai-cells = <0>; - reg = <0x1a>; - compatible = "ti,tlv320aic23"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "simple-audio-card"; - i2s-controller = <&i2s>; - status = "okay"; - - simple-audio-card,name = "mbed-DAC"; - - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Line", "Line In", - "Headphone", "Headphone Jack"; - - simple-audio-card,routing = - "Headphone Jack", "LHPOUT", - "Headphone Jack", "RHPOUT", - "LLINEIN", "Line In", - "RLINEIN", "Line In", - "MICIN", "Mic Jack"; - - simple-audio-card,format = "i2s"; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&tlv320aic23>; - system-clock-frequency = <12288000>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mcp23017-overlay.dts b/arch/arm64/boot/dts/overlays/mcp23017-overlay.dts deleted file mode 100644 index c546d8ba7e6d270c3a4f9e0d7a9bce60a979b38c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp23017-overlay.dts +++ /dev/null @@ -1,69 +0,0 @@ -// Definitions for MCP23017 Gpio Extender from Microchip Semiconductor - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - mcp23017_pins: mcp23017_pins@20 { - brcm,pins = <4>; - brcm,function = <0>; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - mcp23017: mcp@20 { - compatible = "microchip,mcp23017"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&mcp23017>; - __dormant__ { - compatible = "microchip,mcp23008"; - }; - }; - - fragment@4 { - target = <&mcp23017>; - mcp23017_irq: __overlay__ { - #interrupt-cells=<2>; - interrupt-parent = <&gpio>; - interrupts = <4 2>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - __overrides__ { - gpiopin = <&mcp23017_pins>,"brcm,pins:0", - <&mcp23017_irq>,"interrupts:0"; - addr = <&mcp23017>,"reg:0", <&mcp23017_pins>,"reg:0"; - mcp23008 = <0>,"=3"; - noints = <0>,"!1!4"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/mcp23s17-overlay.dts b/arch/arm64/boot/dts/overlays/mcp23s17-overlay.dts deleted file mode 100644 index 484d64b225fb8b4af2e908d04f1be448c248e9ff..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp23s17-overlay.dts +++ /dev/null @@ -1,732 +0,0 @@ -// Overlay for MCP23S08/17 GPIO Extenders from Microchip Semiconductor - -// dtparams: -// s08-spi--present - 4-bit integer, bitmap indicating MCP23S08 devices present on SPI, CS#. -// s17-spi--present - 8-bit integer, bitmap indicating MCP23S17 devices present on SPI, CS#. -// s08-spi--int-gpio - integer, enables interrupts on a single MCP23S08 device on SPI, CS#, specifies the GPIO pin to which INT output is connected. -// s17-spi--int-gpio - integer, enables mirrored interrupts on a single MCP23S17 device on SPI, CS#, specifies the GPIO pin to which either INTA or INTB output is connected. -// -// If devices are present on SPI1 or SPI2, those interfaces must be enabled with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -// If interrupts are enabled for a device on a given CS# on a SPI bus, that device must be the only one present on that SPI bus/CS#. -// -// Example 1: A single MCP23S17 device on SPI0, CS#0 with its SPI addr set to 0 and INTA output connected to GPIO25: -// dtoverlay=mcp23s17:s17-spi0-0-present=1,s17-spi0-0-int-gpio=25 -// -// Example 2: Two MCP23S08 devices on SPI1, CS#0 with their addrs set to 2 and 3. Three MCP23S17 devices on SPI1, CS#1 with their addrs set to 0, 1 and 7: -// dtoverlay=spi1-2cs -// dtoverlay=mcp23s17:s08-spi1-0-present=12,s17-spi1-1-present=131 - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - // disable spi-dev on spi0.0 - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi0.1 - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.0 - fragment@2 { - target-path = "spi1/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.1 - fragment@3 { - target-path = "spi1/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi1.2 - fragment@4 { - target-path = "spi1/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.0 - fragment@5 { - target-path = "spi2/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.1 - fragment@6 { - target-path = "spi2/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - // disable spi-dev on spi2.2 - fragment@7 { - target-path = "spi2/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - // enable one or more mcp23s08s on spi0.0 - fragment@8 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_00: mcp23s08@0 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi0.1 - fragment@9 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_01: mcp23s08@1 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi0-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi0-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi1.0 - fragment@10 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_10: mcp23s08@0 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi1.1 - fragment@11 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_11: mcp23s08@1 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi1.2 - fragment@12 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_12: mcp23s08@2 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi1-2-present parameter */ - reg = <2>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi1-2-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi2.0 - fragment@13 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_20: mcp23s08@0 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi2.1 - fragment@14 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_21: mcp23s08@1 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s08s on spi2.2 - fragment@15 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s08_22: mcp23s08@2 { - compatible = "microchip,mcp23s08"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s08-spi2-2-present parameter */ - reg = <2>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s08-spi2-2-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi0.0 - fragment@16 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_00: mcp23s17@0 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi0.1 - fragment@17 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_01: mcp23s17@1 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi0-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi0-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi1.0 - fragment@18 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_10: mcp23s17@0 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi1.1 - fragment@19 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_11: mcp23s17@1 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi1.2 - fragment@20 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_12: mcp23s17@2 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi1-2-present parameter */ - reg = <2>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi1-2-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi2.0 - fragment@21 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_20: mcp23s17@0 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-0-present parameter */ - reg = <0>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-0-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi2.1 - fragment@22 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_21: mcp23s17@1 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-1-present parameter */ - reg = <1>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-1-int-gpio parameter */ - }; - }; - }; - - // enable one or more mcp23s17s on spi2.2 - fragment@23 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - mcp23s17_22: mcp23s17@2 { - compatible = "microchip,mcp23s17"; - gpio-controller; - #gpio-cells = <2>; - microchip,spi-present-mask = <0x00>; /* overwritten by mcp23s17-spi2-2-present parameter */ - reg = <2>; - spi-max-frequency = <500000>; - status = "okay"; - #interrupt-cells=<2>; - interrupts = <0 2>; /* 1st word overwritten by mcp23s17-spi2-2-int-gpio parameter */ - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.0 as a input with no pull-up/down - fragment@24 { - target = <&gpio>; - __dormant__ { - spi0_0_int_pins: spi0_0_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-0-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi0.1 as a input with no pull-up/down - fragment@25 { - target = <&gpio>; - __dormant__ { - spi0_1_int_pins: spi0_1_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi0-1-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.0 as a input with no pull-up/down - fragment@26 { - target = <&gpio>; - __dormant__ { - spi1_0_int_pins: spi1_0_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-0-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.1 as a input with no pull-up/down - fragment@27 { - target = <&gpio>; - __dormant__ { - spi1_1_int_pins: spi1_1_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-1-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi1.2 as a input with no pull-up/down - fragment@28 { - target = <&gpio>; - __dormant__ { - spi1_2_int_pins: spi1_2_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi1-2-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.0 as a input with no pull-up/down - fragment@29 { - target = <&gpio>; - __dormant__ { - spi2_0_int_pins: spi2_0_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-0-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.1 as a input with no pull-up/down - fragment@30 { - target = <&gpio>; - __dormant__ { - spi2_1_int_pins: spi2_1_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-1-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to INT(A/B) output of mcp23s08/17 on spi2.2 as a input with no pull-up/down - fragment@31 { - target = <&gpio>; - __dormant__ { - spi2_2_int_pins: spi2_2_int_pins { - brcm,pins = <0>; /* overwritten by mcp23s08/17-spi2-2-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Enable interrupts for a mcp23s08 on spi0.0. - // Use default active low interrupt signalling. - fragment@32 { - target = <&mcp23s08_00>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi0.1. - // Use default active low interrupt signalling. - fragment@33 { - target = <&mcp23s08_01>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi1.0. - // Use default active low interrupt signalling. - fragment@34 { - target = <&mcp23s08_10>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi1.1. - // Use default active low interrupt signalling. - fragment@35 { - target = <&mcp23s08_11>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi1.2. - // Use default active low interrupt signalling. - fragment@36 { - target = <&mcp23s08_12>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi2.0. - // Use default active low interrupt signalling. - fragment@37 { - target = <&mcp23s08_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi2.1. - // Use default active low interrupt signalling. - fragment@38 { - target = <&mcp23s08_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s08 on spi2.2. - // Use default active low interrupt signalling. - fragment@39 { - target = <&mcp23s08_22>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - }; - }; - - // Enable interrupts for a mcp23s17 on spi0.0. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Use default active low interrupt signalling. - fragment@40 { - target = <&mcp23s17_00>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi0.1. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@41 { - target = <&mcp23s17_01>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi1.0. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@42 { - target = <&mcp23s17_10>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi1.1. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@43 { - target = <&mcp23s17_11>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi1.2. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@44 { - target = <&mcp23s17_12>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi2.0. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@45 { - target = <&mcp23s17_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi2.1. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@46 { - target = <&mcp23s17_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - // Enable interrupts for a mcp23s17 on spi2.2. - // Enable mirroring so that either INTA or INTB output of mcp23s17 can be connected to the GPIO pin. - // Configure INTA/B outputs of mcp23s08/17 as active low. - fragment@47 { - target = <&mcp23s17_22>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - microchip,irq-mirror; - }; - }; - - __overrides__ { - s08-spi0-0-present = <0>,"+0+8", <&mcp23s08_00>,"microchip,spi-present-mask:0"; - s08-spi0-1-present = <0>,"+1+9", <&mcp23s08_01>,"microchip,spi-present-mask:0"; - s08-spi1-0-present = <0>,"+2+10", <&mcp23s08_10>,"microchip,spi-present-mask:0"; - s08-spi1-1-present = <0>,"+3+11", <&mcp23s08_11>,"microchip,spi-present-mask:0"; - s08-spi1-2-present = <0>,"+4+12", <&mcp23s08_12>,"microchip,spi-present-mask:0"; - s08-spi2-0-present = <0>,"+5+13", <&mcp23s08_20>,"microchip,spi-present-mask:0"; - s08-spi2-1-present = <0>,"+6+14", <&mcp23s08_21>,"microchip,spi-present-mask:0"; - s08-spi2-2-present = <0>,"+7+15", <&mcp23s08_22>,"microchip,spi-present-mask:0"; - s17-spi0-0-present = <0>,"+0+16", <&mcp23s17_00>,"microchip,spi-present-mask:0"; - s17-spi0-1-present = <0>,"+1+17", <&mcp23s17_01>,"microchip,spi-present-mask:0"; - s17-spi1-0-present = <0>,"+2+18", <&mcp23s17_10>,"microchip,spi-present-mask:0"; - s17-spi1-1-present = <0>,"+3+19", <&mcp23s17_11>,"microchip,spi-present-mask:0"; - s17-spi1-2-present = <0>,"+4+20", <&mcp23s17_12>,"microchip,spi-present-mask:0"; - s17-spi2-0-present = <0>,"+5+21", <&mcp23s17_20>,"microchip,spi-present-mask:0"; - s17-spi2-1-present = <0>,"+6+22", <&mcp23s17_21>,"microchip,spi-present-mask:0"; - s17-spi2-2-present = <0>,"+7+23", <&mcp23s17_22>,"microchip,spi-present-mask:0"; - s08-spi0-0-int-gpio = <0>,"+24+32", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s08_00>,"interrupts:0"; - s08-spi0-1-int-gpio = <0>,"+25+33", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s08_01>,"interrupts:0"; - s08-spi1-0-int-gpio = <0>,"+26+34", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s08_10>,"interrupts:0"; - s08-spi1-1-int-gpio = <0>,"+27+35", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s08_11>,"interrupts:0"; - s08-spi1-2-int-gpio = <0>,"+28+36", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s08_12>,"interrupts:0"; - s08-spi2-0-int-gpio = <0>,"+29+37", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s08_20>,"interrupts:0"; - s08-spi2-1-int-gpio = <0>,"+30+38", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s08_21>,"interrupts:0"; - s08-spi2-2-int-gpio = <0>,"+31+39", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s08_22>,"interrupts:0"; - s17-spi0-0-int-gpio = <0>,"+24+40", <&spi0_0_int_pins>,"brcm,pins:0", <&mcp23s17_00>,"interrupts:0"; - s17-spi0-1-int-gpio = <0>,"+25+41", <&spi0_1_int_pins>,"brcm,pins:0", <&mcp23s17_01>,"interrupts:0"; - s17-spi1-0-int-gpio = <0>,"+26+42", <&spi1_0_int_pins>,"brcm,pins:0", <&mcp23s17_10>,"interrupts:0"; - s17-spi1-1-int-gpio = <0>,"+27+43", <&spi1_1_int_pins>,"brcm,pins:0", <&mcp23s17_11>,"interrupts:0"; - s17-spi1-2-int-gpio = <0>,"+28+44", <&spi1_2_int_pins>,"brcm,pins:0", <&mcp23s17_12>,"interrupts:0"; - s17-spi2-0-int-gpio = <0>,"+29+45", <&spi2_0_int_pins>,"brcm,pins:0", <&mcp23s17_20>,"interrupts:0"; - s17-spi2-1-int-gpio = <0>,"+30+46", <&spi2_1_int_pins>,"brcm,pins:0", <&mcp23s17_21>,"interrupts:0"; - s17-spi2-2-int-gpio = <0>,"+31+47", <&spi2_2_int_pins>,"brcm,pins:0", <&mcp23s17_22>,"interrupts:0"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/mcp2515-can0-overlay.dts b/arch/arm64/boot/dts/overlays/mcp2515-can0-overlay.dts deleted file mode 100644 index 0dae8053a9a91ba1632640df123486aa4b3228ac..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp2515-can0-overlay.dts +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Device tree overlay for mcp251x/can0 on spi0.0 - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - /* disable spi-dev for spi0.0 */ - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - /* the interrupt pin of the can-controller */ - fragment@2 { - target = <&gpio>; - __overlay__ { - can0_pins: can0_pins { - brcm,pins = <25>; - brcm,function = <0>; /* input */ - }; - }; - }; - - /* the clock/oscillator of the can-controller */ - fragment@3 { - target-path = "/clocks"; - __overlay__ { - /* external oscillator of mcp2515 on SPI0.0 */ - can0_osc: can0_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - }; - }; - }; - - /* the spi config of the can-controller itself binding everything together */ - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - can0: mcp2515@0 { - reg = <0>; - compatible = "microchip,mcp2515"; - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins>; - spi-max-frequency = <10000000>; - interrupt-parent = <&gpio>; - interrupts = <25 8>; /* IRQ_TYPE_LEVEL_LOW */ - clocks = <&can0_osc>; - }; - }; - }; - __overrides__ { - oscillator = <&can0_osc>,"clock-frequency:0"; - spimaxfrequency = <&can0>,"spi-max-frequency:0"; - interrupt = <&can0_pins>,"brcm,pins:0",<&can0>,"interrupts:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mcp2515-can1-overlay.dts b/arch/arm64/boot/dts/overlays/mcp2515-can1-overlay.dts deleted file mode 100644 index c70dc3d05ebfe3526f7263cabf3bcdc827fc29ed..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp2515-can1-overlay.dts +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Device tree overlay for mcp251x/can1 on spi0.1 edited by petit_miner - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - /* disable spi-dev for spi0.1 */ - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - /* the interrupt pin of the can-controller */ - fragment@2 { - target = <&gpio>; - __overlay__ { - can1_pins: can1_pins { - brcm,pins = <25>; - brcm,function = <0>; /* input */ - }; - }; - }; - - /* the clock/oscillator of the can-controller */ - fragment@3 { - target-path = "/clocks"; - __overlay__ { - /* external oscillator of mcp2515 on spi0.1 */ - can1_osc: can1_osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <16000000>; - }; - }; - }; - - /* the spi config of the can-controller itself binding everything together */ - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - can1: mcp2515@1 { - reg = <1>; - compatible = "microchip,mcp2515"; - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins>; - spi-max-frequency = <10000000>; - interrupt-parent = <&gpio>; - interrupts = <25 8>; /* IRQ_TYPE_LEVEL_LOW */ - clocks = <&can1_osc>; - }; - }; - }; - __overrides__ { - oscillator = <&can1_osc>,"clock-frequency:0"; - spimaxfrequency = <&can1>,"spi-max-frequency:0"; - interrupt = <&can1_pins>,"brcm,pins:0",<&can1>,"interrupts:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mcp3008-overlay.dts b/arch/arm64/boot/dts/overlays/mcp3008-overlay.dts deleted file mode 100644 index 0b7d9f75546efbbfb99320670d130a6d10d5b53f..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp3008-overlay.dts +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Device tree overlay for Microchip mcp3008 10-Bit A/D Converters - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@2 { - target-path = "spi1/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@3 { - target-path = "spi1/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@4 { - target-path = "spi1/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@5 { - target-path = "spi2/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@6 { - target-path = "spi2/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@7 { - target-path = "spi2/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@8 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_00: mcp3008@0 { - compatible = "mcp3008"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@9 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_01: mcp3008@1 { - compatible = "mcp3008"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@10 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_10: mcp3008@0 { - compatible = "mcp3008"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@11 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_11: mcp3008@1 { - compatible = "mcp3008"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@12 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_12: mcp3008@2 { - compatible = "mcp3008"; - reg = <2>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@13 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_20: mcp3008@0 { - compatible = "mcp3008"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@14 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_21: mcp3008@1 { - compatible = "mcp3008"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@15 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3008_22: mcp3008@2 { - compatible = "mcp3008"; - reg = <2>; - spi-max-frequency = <1600000>; - }; - }; - }; - - __overrides__ { - spi0-0-present = <0>, "+0+8"; - spi0-1-present = <0>, "+1+9"; - spi1-0-present = <0>, "+2+10"; - spi1-1-present = <0>, "+3+11"; - spi1-2-present = <0>, "+4+12"; - spi2-0-present = <0>, "+5+13"; - spi2-1-present = <0>, "+6+14"; - spi2-2-present = <0>, "+7+15"; - spi0-0-speed = <&mcp3008_00>, "spi-max-frequency:0"; - spi0-1-speed = <&mcp3008_01>, "spi-max-frequency:0"; - spi1-0-speed = <&mcp3008_10>, "spi-max-frequency:0"; - spi1-1-speed = <&mcp3008_11>, "spi-max-frequency:0"; - spi1-2-speed = <&mcp3008_12>, "spi-max-frequency:0"; - spi2-0-speed = <&mcp3008_20>, "spi-max-frequency:0"; - spi2-1-speed = <&mcp3008_21>, "spi-max-frequency:0"; - spi2-2-speed = <&mcp3008_22>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mcp3202-overlay.dts b/arch/arm64/boot/dts/overlays/mcp3202-overlay.dts deleted file mode 100644 index 8e4e9f60f285fac444c05743c6a22c421c07248d..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp3202-overlay.dts +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Device tree overlay for Microchip mcp3202 12-Bit A/D Converters - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@2 { - target-path = "spi1/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@3 { - target-path = "spi1/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@4 { - target-path = "spi1/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@5 { - target-path = "spi2/spidev@0"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@6 { - target-path = "spi2/spidev@1"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@7 { - target-path = "spi2/spidev@2"; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@8 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_00: mcp3202@0 { - compatible = "mcp3202"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@9 { - target = <&spi0>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_01: mcp3202@1 { - compatible = "mcp3202"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@10 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_10: mcp3202@0 { - compatible = "mcp3202"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@11 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_11: mcp3202@1 { - compatible = "mcp3202"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@12 { - target = <&spi1>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_12: mcp3202@2 { - compatible = "mcp3202"; - reg = <2>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@13 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_20: mcp3202@0 { - compatible = "mcp3202"; - reg = <0>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@14 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_21: mcp3202@1 { - compatible = "mcp3202"; - reg = <1>; - spi-max-frequency = <1600000>; - }; - }; - }; - - fragment@15 { - target = <&spi2>; - __dormant__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - mcp3202_22: mcp3202@2 { - compatible = "mcp3202"; - reg = <2>; - spi-max-frequency = <1600000>; - }; - }; - }; - - __overrides__ { - spi0-0-present = <0>, "+0+8"; - spi0-1-present = <0>, "+1+9"; - spi1-0-present = <0>, "+2+10"; - spi1-1-present = <0>, "+3+11"; - spi1-2-present = <0>, "+4+12"; - spi2-0-present = <0>, "+5+13"; - spi2-1-present = <0>, "+6+14"; - spi2-2-present = <0>, "+7+15"; - spi0-0-speed = <&mcp3202_00>, "spi-max-frequency:0"; - spi0-1-speed = <&mcp3202_01>, "spi-max-frequency:0"; - spi1-0-speed = <&mcp3202_10>, "spi-max-frequency:0"; - spi1-1-speed = <&mcp3202_11>, "spi-max-frequency:0"; - spi1-2-speed = <&mcp3202_12>, "spi-max-frequency:0"; - spi2-0-speed = <&mcp3202_20>, "spi-max-frequency:0"; - spi2-1-speed = <&mcp3202_21>, "spi-max-frequency:0"; - spi2-2-speed = <&mcp3202_22>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mcp342x-overlay.dts b/arch/arm64/boot/dts/overlays/mcp342x-overlay.dts deleted file mode 100644 index 714eca5a4b5e0cebdfc77a86533b335ec4042eb5..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mcp342x-overlay.dts +++ /dev/null @@ -1,164 +0,0 @@ -// Overlay for MCP3421-8 ADCs from Microchip Semiconductor - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3421: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3421"; - - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3422: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3422"; - - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3423: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3423"; - - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3424: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3424"; - - status = "okay"; - }; - }; - }; - - fragment@4 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3425: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3425","mcp3425"; - - status = "okay"; - }; - }; - }; - - fragment@5 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3426: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3426"; - - status = "okay"; - }; - }; - }; - - fragment@6 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3427: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3427"; - - status = "okay"; - }; - }; - }; - - fragment@7 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - mcp3428: mcp@68 { - reg = <0x68>; - compatible = "microchip,mcp3428"; - - status = "okay"; - }; - }; - }; - - __overrides__ { - addr = <&mcp3421>,"reg:0", - <&mcp3422>,"reg:0", - <&mcp3423>,"reg:0", - <&mcp3424>,"reg:0", - <&mcp3425>,"reg:0", - <&mcp3426>,"reg:0", - <&mcp3427>,"reg:0", - <&mcp3428>,"reg:0"; - mcp3421 = <0>,"=0"; - mcp3422 = <0>,"=1"; - mcp3423 = <0>,"=2"; - mcp3424 = <0>,"=3"; - mcp3425 = <0>,"=4"; - mcp3426 = <0>,"=5"; - mcp3427 = <0>,"=6"; - mcp3428 = <0>,"=7"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/media-center-overlay.dts b/arch/arm64/boot/dts/overlays/media-center-overlay.dts deleted file mode 100644 index 0fcdcfa18eb3b4a74f62c16f1f54d534b802e100..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/media-center-overlay.dts +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Device Tree overlay for Media Center HAT by Pi Supply - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - - spidev@0{ - status = "disabled"; - }; - - spidev@1{ - status = "disabled"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - rpi_display_pins: rpi_display_pins { - brcm,pins = <12 23 24 25>; - brcm,function = <1 1 1 0>; /* out out out in */ - brcm,pull = <0 0 0 2>; /* - - - up */ - }; - }; - }; - - fragment@2 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - rpidisplay: rpi-display@0{ - compatible = "ilitek,ili9341"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&rpi_display_pins>; - - spi-max-frequency = <32000000>; - rotate = <90>; - bgr; - fps = <30>; - buswidth = <8>; - reset-gpios = <&gpio 23 0>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 12 1>; - debug = <0>; - }; - - rpidisplay_ts: rpi-display-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <25 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 25 0>; - ti,x-plate-ohms = /bits/ 16 <60>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - - fragment@3 { - target-path = "/"; - __overlay__ { - lirc_rpi: lirc_rpi { - compatible = "rpi,lirc-rpi"; - pinctrl-names = "default"; - pinctrl-0 = <&lirc_pins>; - status = "okay"; - - // Override autodetection of IR receiver circuit - // (0 = active high, 1 = active low, -1 = no override ) - rpi,sense = <0xffffffff>; - - // Software carrier - // (0 = off, 1 = on) - rpi,softcarrier = <1>; - - // Invert output - // (0 = off, 1 = on) - rpi,invert = <0>; - - // Enable debugging messages - // (0 = off, 1 = on) - rpi,debug = <0>; - }; - }; - }; - - fragment@4 { - target = <&gpio>; - __overlay__ { - lirc_pins: lirc_pins { - brcm,pins = <6 5>; - brcm,function = <1 0>; // out in - brcm,pull = <0 1>; // off down - }; - }; - }; - - __overrides__ { - speed = <&rpidisplay>,"spi-max-frequency:0"; - rotate = <&rpidisplay>,"rotate:0"; - fps = <&rpidisplay>,"fps:0"; - debug = <&rpidisplay>,"debug:0", - <&lirc_rpi>,"rpi,debug:0"; - xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; - swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; - backlight = <&rpidisplay>,"led-gpios:4", - <&rpi_display_pins>,"brcm,pins:0"; - - gpio_out_pin = <&lirc_pins>,"brcm,pins:0"; - gpio_in_pin = <&lirc_pins>,"brcm,pins:4"; - gpio_in_pull = <&lirc_pins>,"brcm,pull:4"; - - sense = <&lirc_rpi>,"rpi,sense:0"; - softcarrier = <&lirc_rpi>,"rpi,softcarrier:0"; - invert = <&lirc_rpi>,"rpi,invert:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/merus-amp-overlay.dts b/arch/arm64/boot/dts/overlays/merus-amp-overlay.dts deleted file mode 100644 index 4501fbdc253da8cb45f3bfc764c0ce9f20b9f7ea..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/merus-amp-overlay.dts +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for Infineon Merus-Amp -/dts-v1/; -/plugin/; -#include -#include - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - merus_amp_pins: merus_amp_pins { - brcm,pins = <23>; - brcm,function = <0>; /* in */ - brcm,pull = <2>; /* up */ - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - merus_amp: ma120x0p@20 { - #sound-dai-cells = <0>; - compatible = "ma,ma120x0p"; - reg = <0x20>; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&merus_amp_pins>; - enable_gp-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; - mute_gp-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; - booster_gp-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - error_gp-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; - }; - }; - }; - - fragment@3 { - target = <&sound>; - __overlay__ { - compatible = "merus,merus-amp"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/midi-uart0-overlay.dts b/arch/arm64/boot/dts/overlays/midi-uart0-overlay.dts deleted file mode 100644 index 565af7cf79d761877be3bd06191f31aabf9e1e9b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/midi-uart0-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/dts-v1/; -/plugin/; - -#include - -/* - * Fake a higher clock rate to get a larger divisor, and thereby a lower - * baudrate. The real clock is 48MHz, which we scale so that requesting - * 38.4kHz results in an actual 31.25kHz. - * - * 48000000*38400/31250 = 58982400 - */ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - midi_clk: midi_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "uart0_pclk"; - clock-frequency = <58982400>; - }; - }; - }; - - fragment@1 { - target = <&uart0>; - __overlay__ { - clocks = <&midi_clk>, - <&clocks BCM2835_CLOCK_VPU>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/midi-uart1-overlay.dts b/arch/arm64/boot/dts/overlays/midi-uart1-overlay.dts deleted file mode 100644 index e0bc410acbff3a7a175dd5d53b3ab0d0802e8239..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/midi-uart1-overlay.dts +++ /dev/null @@ -1,43 +0,0 @@ -/dts-v1/; -/plugin/; - -#include - -/* - * Fake a higher clock rate to get a larger divisor, and thereby a lower - * baudrate. The real clock is 48MHz, which we scale so that requesting - * 38.4kHz results in an actual 31.25kHz. - * - * 48000000*38400/31250 = 58982400 - */ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; - __overlay__ { - midi_clk: clock@5 { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clocks = <&aux BCM2835_AUX_CLOCK_UART>; - clock-mult = <38400>; - clock-div = <31250>; - }; - }; - }; - - fragment@1 { - target = <&uart1>; - __overlay__ { - clocks = <&midi_clk>; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - clock-output-names = "aux_uart", "aux_spi1", "aux_spi2"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/miniuart-bt-overlay.dts b/arch/arm64/boot/dts/overlays/miniuart-bt-overlay.dts deleted file mode 100644 index 30d3d8549da0afc6166e073103ea0df05335e6cf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/miniuart-bt-overlay.dts +++ /dev/null @@ -1,74 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore - UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum - usable baudrate. - - It is also necessary to edit /lib/systemd/system/hciuart.service and - replace ttyAMA0 with ttyS0, unless you have a system with udev rules - that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1 - instead because it will always be correct. - - If cmdline.txt uses the alias serial0 to refer to the user-accessable port - then the firmware will replace with the appropriate port whether or not - this overlay is used. -*/ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart0>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&uart1>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>; - status = "okay"; - }; - }; - - fragment@2 { - target = <&uart0_pins>; - __overlay__ { - brcm,pins; - brcm,function; - brcm,pull; - }; - }; - - fragment@3 { - target = <&uart1_pins>; - __overlay__ { - brcm,pins = <32 33>; - brcm,function = <2>; /* alt5=UART1 */ - brcm,pull = <0 2>; - }; - }; - - fragment@4 { - target = <&gpio>; - __overlay__ { - fake_bt_cts: fake_bt_cts { - brcm,pins = <31>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@5 { - target-path = "/aliases"; - __overlay__ { - serial0 = "/soc/serial@7e201000"; - serial1 = "/soc/serial@7e215040"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mmc-overlay.dts b/arch/arm64/boot/dts/overlays/mmc-overlay.dts deleted file mode 100644 index c1a2f691aa1e71da834279032672ebc4af1d6846..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mmc-overlay.dts +++ /dev/null @@ -1,46 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmc>; - frag0: __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; - bus-width = <4>; - brcm,overclock-50 = <0>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - mmc_pins: mmc_pins { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <7>; /* alt3 */ - brcm,pull = <0 2 2 2 2 2>; - }; - }; - }; - - fragment@2 { - target = <&sdhost>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&mmcnr>; - __overlay__ { - status = "disabled"; - }; - }; - - __overrides__ { - overclock_50 = <&frag0>,"brcm,overclock-50:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mpu6050-overlay.dts b/arch/arm64/boot/dts/overlays/mpu6050-overlay.dts deleted file mode 100644 index 3109d90562aee433b4f20d1fa4e4c08894ce8579..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mpu6050-overlay.dts +++ /dev/null @@ -1,28 +0,0 @@ -// Definitions for MPU6050 -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - clock-frequency = <400000>; - - mpu6050: mpu6050@68 { - compatible = "invensense,mpu6050"; - reg = <0x68>; - interrupt-parent = <&gpio>; - interrupts = <4 1>; - }; - }; - }; - - __overrides__ { - interrupt = <&mpu6050>,"interrupts:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/mz61581-overlay.dts b/arch/arm64/boot/dts/overlays/mz61581-overlay.dts deleted file mode 100644 index 32686968c0d65119b64bb6f26da418d67a21a1b9..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/mz61581-overlay.dts +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Device Tree overlay for MZ61581-PI-EXT 2014.12.28 by Tontec - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - mz61581_pins: mz61581_pins { - brcm,pins = <4 15 18 25>; - brcm,function = <0 1 1 1>; /* in out out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - mz61581: mz61581@0{ - compatible = "samsung,s6d02a1"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mz61581_pins>; - - spi-max-frequency = <128000000>; - spi-cpol; - spi-cpha; - - width = <320>; - height = <480>; - rotate = <270>; - bgr; - fps = <30>; - buswidth = <8>; - txbuflen = <32768>; - - reset-gpios = <&gpio 15 0>; - dc-gpios = <&gpio 25 0>; - led-gpios = <&gpio 18 0>; - - init = <0x10000b0 00 - 0x1000011 - 0x20000ff - 0x10000b3 0x02 0x00 0x00 0x00 - 0x10000c0 0x13 0x3b 0x00 0x02 0x00 0x01 0x00 0x43 - 0x10000c1 0x08 0x16 0x08 0x08 - 0x10000c4 0x11 0x07 0x03 0x03 - 0x10000c6 0x00 - 0x10000c8 0x03 0x03 0x13 0x5c 0x03 0x07 0x14 0x08 0x00 0x21 0x08 0x14 0x07 0x53 0x0c 0x13 0x03 0x03 0x21 0x00 - 0x1000035 0x00 - 0x1000036 0xa0 - 0x100003a 0x55 - 0x1000044 0x00 0x01 - 0x10000d0 0x07 0x07 0x1d 0x03 - 0x10000d1 0x03 0x30 0x10 - 0x10000d2 0x03 0x14 0x04 - 0x1000029 - 0x100002c>; - - /* This is a workaround to make sure the init sequence slows down and doesn't fail */ - debug = <3>; - }; - - mz61581_ts: mz61581_ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <4 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 4 0>; - - ti,x-plate-ohms = /bits/ 16 <60>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&mz61581>, "spi-max-frequency:0"; - rotate = <&mz61581>, "rotate:0"; - fps = <&mz61581>, "fps:0"; - txbuflen = <&mz61581>, "txbuflen:0"; - debug = <&mz61581>, "debug:0"; - xohms = <&mz61581_ts>,"ti,x-plate-ohms;0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ov5647-overlay.dts b/arch/arm64/boot/dts/overlays/ov5647-overlay.dts deleted file mode 100644 index 5266d4b8758d3952c956aa01805fde65683d1897..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ov5647-overlay.dts +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for OV5647 camera module on VC I2C bus -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - ov5647: ov5647@36 { - compatible = "ovti,ov5647"; - reg = <0x36>; - status = "okay"; - - pwdn-gpios = <&gpio 41 1>, <&gpio 32 1>; - clocks = <&ov5647_clk>; - - ov5647_clk: camera-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - port { - ov5647_0: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - data-lanes = <1 2>; - clock-noncontinuous; - link-frequencies = - /bits/ 64 <297000000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&csi1>; - __overlay__ { - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&ov5647_0>; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@3 { - target = <&i2c0_pins>; - __overlay__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - fragment@4 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@5 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@6 { - target-path="/__overrides__"; - __overlay__ { - cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0"; - cam0-pwdn = <&ov5647>,"pwdn-gpios:4"; - cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12"; - cam0-led = <&ov5647>,"pwdn-gpios:16"; - }; - }; - - __overrides__ { - i2c_pins_0_1 = <0>,"-2-3+4"; - i2c_pins_28_29 = <0>,"+2-3-4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/papirus-overlay.dts b/arch/arm64/boot/dts/overlays/papirus-overlay.dts deleted file mode 100644 index 7b6bcfd49c86e5a20bd28bc6bf921b4c2ec4df62..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/papirus-overlay.dts +++ /dev/null @@ -1,89 +0,0 @@ -/* PaPiRus ePaper Screen by Pi Supply */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - display_temp: lm75@48 { - compatible = "lm75b"; - reg = <0x48>; - status = "okay"; - #thermal-sensor-cells = <0>; - }; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - thermal-zones { - display { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&display_temp>; - }; - }; - }; - }; - - fragment@2 { - target = <&spi0>; - __overlay__ { - status = "okay"; - - spidev@0{ - status = "disabled"; - }; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - repaper_pins: repaper_pins { - brcm,pins = <14 15 23 24 25>; - brcm,function = <1 1 1 1 0>; /* out out out out in */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - repaper: repaper@0{ - compatible = "not_set"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&repaper_pins>; - - spi-max-frequency = <8000000>; - - panel-on-gpios = <&gpio 23 0>; - border-gpios = <&gpio 14 0>; - discharge-gpios = <&gpio 15 0>; - reset-gpios = <&gpio 24 0>; - busy-gpios = <&gpio 25 0>; - - repaper-thermal-zone = "display"; - }; - }; - }; - - __overrides__ { - panel = <&repaper>, "compatible"; - speed = <&repaper>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pi3-act-led-overlay.dts b/arch/arm64/boot/dts/overlays/pi3-act-led-overlay.dts deleted file mode 100644 index aedfc90e8a31d7e42202346c89566f2fd9783b18..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pi3-act-led-overlay.dts +++ /dev/null @@ -1 +0,0 @@ -#include "act-led-overlay.dts" diff --git a/arch/arm64/boot/dts/overlays/pi3-disable-bt-overlay.dts b/arch/arm64/boot/dts/overlays/pi3-disable-bt-overlay.dts deleted file mode 100644 index e09a49295236b43f34d58e1b31624543512b0512..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pi3-disable-bt-overlay.dts +++ /dev/null @@ -1 +0,0 @@ -#include "disable-bt-overlay.dts" diff --git a/arch/arm64/boot/dts/overlays/pi3-disable-wifi-overlay.dts b/arch/arm64/boot/dts/overlays/pi3-disable-wifi-overlay.dts deleted file mode 100644 index b61b69c14f37c3762afe56452e7ea2228c8157f7..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pi3-disable-wifi-overlay.dts +++ /dev/null @@ -1 +0,0 @@ -#include "disable-wifi-overlay.dts" diff --git a/arch/arm64/boot/dts/overlays/pi3-miniuart-bt-overlay.dts b/arch/arm64/boot/dts/overlays/pi3-miniuart-bt-overlay.dts deleted file mode 100644 index 94c14267716eb18c6f4d6d6db688c7429165ab11..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pi3-miniuart-bt-overlay.dts +++ /dev/null @@ -1 +0,0 @@ -#include "miniuart-bt-overlay.dts" diff --git a/arch/arm64/boot/dts/overlays/pibell-overlay.dts b/arch/arm64/boot/dts/overlays/pibell-overlay.dts deleted file mode 100644 index 9333a9b09772f9837bddb39eddaa59e6aae5bb1c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pibell-overlay.dts +++ /dev/null @@ -1,81 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - codec_out: spdif-transmitter { - #address-cells = <0>; - #size-cells = <0>; - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - }; - - codec_in: card-codec { - #sound-dai-cells = <0>; - compatible = "invensense,ics43432"; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - #sound-dai-cells = <0>; - status = "okay"; - }; - }; - - fragment@2 { - target = <&sound>; - snd: __overlay__ { - compatible = "simple-audio-card"; - simple-audio-card,name = "PiBell"; - - status="okay"; - - capture_link: simple-audio-card,dai-link@0 { - format = "i2s"; - - r_cpu_dai: cpu { - sound-dai = <&i2s>; - -/* example TDM slot configuration - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; -*/ - }; - - r_codec_dai: codec { - sound-dai = <&codec_in>; - }; - }; - - playback_link: simple-audio-card,dai-link@1 { - format = "i2s"; - - p_cpu_dai: cpu { - sound-dai = <&i2s>; - -/* example TDM slot configuration - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; -*/ - }; - - p_codec_dai: codec { - sound-dai = <&codec_out>; - }; - }; - }; - }; - - __overrides__ { - alsaname = <&snd>, "simple-audio-card,name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/piglow-overlay.dts b/arch/arm64/boot/dts/overlays/piglow-overlay.dts deleted file mode 100644 index 075bceef158c84ddf359de2698a1d7ffbe8fad23..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/piglow-overlay.dts +++ /dev/null @@ -1,97 +0,0 @@ -// Definitions for SN3218 LED driver from Si-En Technology on PiGlow -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - sn3218@54 { - compatible = "si-en,sn3218"; - reg = <0x54>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@1 { - reg = <1>; - label = "piglow:red:led1"; - }; - led@2 { - reg = <2>; - label = "piglow:orange:led2"; - }; - led@3 { - reg = <3>; - label = "piglow:yellow:led3"; - }; - led@4 { - reg = <4>; - label = "piglow:green:led4"; - }; - led@5 { - reg = <5>; - label = "piglow:blue:led5"; - }; - led@6 { - reg = <6>; - label = "piglow:green:led6"; - }; - led@7 { - reg = <7>; - label = "piglow:red:led7"; - }; - led@8 { - reg = <8>; - label = "piglow:orange:led8"; - }; - led@9 { - reg = <9>; - label = "piglow:yellow:led9"; - }; - led@10 { - reg = <10>; - label = "piglow:white:led10"; - }; - led@11 { - reg = <11>; - label = "piglow:white:led11"; - }; - led@12 { - reg = <12>; - label = "piglow:blue:led12"; - }; - led@13 { - reg = <13>; - label = "piglow:white:led13"; - }; - led@14 { - reg = <14>; - label = "piglow:green:led14"; - }; - led@15 { - reg = <15>; - label = "piglow:blue:led15"; - }; - led@16 { - reg = <16>; - label = "piglow:yellow:led16"; - }; - led@17 { - reg = <17>; - label = "piglow:orange:led17"; - }; - led@18 { - reg = <18>; - label = "piglow:red:led18"; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/piscreen-overlay.dts b/arch/arm64/boot/dts/overlays/piscreen-overlay.dts deleted file mode 100644 index ae1af76d3923f430be0e9f9baf305d978c2f3632..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/piscreen-overlay.dts +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Device Tree overlay for PiScreen 3.5" display shield by Ozzmaker - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - piscreen_pins: piscreen_pins { - brcm,pins = <17 25 24 22>; - brcm,function = <0 1 1 1>; /* in out out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - piscreen: piscreen@0{ - compatible = "ilitek,ili9486"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&piscreen_pins>; - - spi-max-frequency = <24000000>; - rotate = <270>; - bgr; - fps = <30>; - buswidth = <8>; - regwidth = <16>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 22 1>; - debug = <0>; - - init = <0x10000b0 0x00 - 0x1000011 - 0x20000ff - 0x100003a 0x55 - 0x1000036 0x28 - 0x10000c2 0x44 - 0x10000c5 0x00 0x00 0x00 0x00 - 0x10000e0 0x0f 0x1f 0x1c 0x0c 0x0f 0x08 0x48 0x98 0x37 0x0a 0x13 0x04 0x11 0x0d 0x00 - 0x10000e1 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 - 0x10000e2 0x0f 0x32 0x2e 0x0b 0x0d 0x05 0x47 0x75 0x37 0x06 0x10 0x03 0x24 0x20 0x00 - 0x1000011 - 0x1000029>; - }; - - piscreen_ts: piscreen-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <17 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 17 0>; - ti,swap-xy; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&piscreen>,"spi-max-frequency:0"; - rotate = <&piscreen>,"rotate:0"; - fps = <&piscreen>,"fps:0"; - debug = <&piscreen>,"debug:0"; - xohms = <&piscreen_ts>,"ti,x-plate-ohms;0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/piscreen2r-overlay.dts b/arch/arm64/boot/dts/overlays/piscreen2r-overlay.dts deleted file mode 100644 index 93b85be3f7c15cac48effd2e897e19fa4a33e463..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/piscreen2r-overlay.dts +++ /dev/null @@ -1,106 +0,0 @@ - /* - * Device Tree overlay for PiScreen2 3.5" TFT with resistive touch by Ozzmaker.com - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - piscreen2_pins: piscreen2_pins { - brcm,pins = <17 25 24 22>; - brcm,function = <0 1 1 1>; /* in out out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - piscreen2: piscreen2@0{ - compatible = "ilitek,ili9486"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&piscreen2_pins>; - bgr; - spi-max-frequency = <64000000>; - rotate = <90>; - fps = <30>; - buswidth = <8>; - regwidth = <16>; - txbuflen = <32768>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 22 1>; - debug = <0>; - - init = <0x10000b0 0x00 - 0x1000011 - 0x20000ff - 0x100003a 0x55 - 0x1000036 0x28 - 0x10000c0 0x11 0x09 - 0x10000c1 0x41 - 0x10000c5 0x00 0x00 0x00 0x00 - 0x10000b6 0x00 0x02 - 0x10000f7 0xa9 0x51 0x2c 0x2 - 0x10000be 0x00 0x04 - 0x10000e9 0x00 - 0x1000011 - 0x1000029>; - - }; - - piscreen2_ts: piscreen2-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <17 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 17 0>; - ti,swap-xy; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&piscreen2>,"spi-max-frequency:0"; - rotate = <&piscreen2>,"rotate:0"; - fps = <&piscreen2>,"fps:0"; - debug = <&piscreen2>,"debug:0"; - xohms = <&piscreen2_ts>,"ti,x-plate-ohms;0"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/pisound-overlay.dts b/arch/arm64/boot/dts/overlays/pisound-overlay.dts deleted file mode 100644 index 49efb2b768fbc7edcb974cbaba62a2f607ae800e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pisound-overlay.dts +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Pisound Linux kernel module. - * Copyright (C) 2016-2017 Vilniaus Blokas UAB, https://blokas.io/pisound - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 of the - * License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@3 { - target = <&spi0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - pisound_spi: pisound_spi@0{ - compatible = "blokaslabs,pisound-spi"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - spi-max-frequency = <1000000>; - }; - }; - }; - - fragment@4 { - target-path = "/"; - __overlay__ { - pcm5102a-codec { - #sound-dai-cells = <0>; - compatible = "ti,pcm5102a"; - status = "okay"; - }; - }; - }; - - fragment@5 { - target = <&sound>; - __overlay__ { - compatible = "blokaslabs,pisound"; - i2s-controller = <&i2s>; - status = "okay"; - - pinctrl-0 = <&pisound_button_pins>; - - osr-gpios = - <&gpio 13 GPIO_ACTIVE_HIGH>, - <&gpio 26 GPIO_ACTIVE_HIGH>, - <&gpio 16 GPIO_ACTIVE_HIGH>; - - reset-gpios = - <&gpio 12 GPIO_ACTIVE_HIGH>, - <&gpio 24 GPIO_ACTIVE_HIGH>; - - data_available-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; - - button-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - }; - }; - - fragment@6 { - target = <&gpio>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&pisound_button_pins>; - - pisound_button_pins: pisound_button_pins { - brcm,pins = <17>; - brcm,function = <0>; // Input - brcm,pull = <2>; // Pull-Up - }; - }; - }; - - fragment@7 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pitft22-overlay.dts b/arch/arm64/boot/dts/overlays/pitft22-overlay.dts deleted file mode 100644 index 589ad13795b18def890497784f656ebc5564daab..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pitft22-overlay.dts +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Device Tree overlay for pitft by Adafruit - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - - spidev@0{ - status = "disabled"; - }; - - spidev@1{ - status = "disabled"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - pitft_pins: pitft_pins { - brcm,pins = <25>; - brcm,function = <1>; /* out */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - fragment@2 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pitft: pitft@0{ - compatible = "ilitek,ili9340"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pitft_pins>; - - spi-max-frequency = <32000000>; - rotate = <90>; - fps = <25>; - bgr; - buswidth = <8>; - dc-gpios = <&gpio 25 0>; - debug = <0>; - }; - - }; - }; - - __overrides__ { - speed = <&pitft>,"spi-max-frequency:0"; - rotate = <&pitft>,"rotate:0"; - fps = <&pitft>,"fps:0"; - debug = <&pitft>,"debug:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pitft28-capacitive-overlay.dts b/arch/arm64/boot/dts/overlays/pitft28-capacitive-overlay.dts deleted file mode 100644 index 33901ee1db7a7cc474b83a6edb1b6632fd452c49..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pitft28-capacitive-overlay.dts +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Device Tree overlay for Adafruit PiTFT 2.8" capacitive touch screen - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - pitft_pins: pitft_pins { - brcm,pins = <24 25>; - brcm,function = <0 1>; /* in out */ - brcm,pull = <2 0>; /* pullup none */ - }; - }; - }; - - fragment@3 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pitft: pitft@0{ - compatible = "ilitek,ili9340"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pitft_pins>; - - spi-max-frequency = <32000000>; - rotate = <90>; - fps = <25>; - bgr; - buswidth = <8>; - dc-gpios = <&gpio 25 0>; - debug = <0>; - }; - }; - }; - - fragment@4 { - target = <&i2c1>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - ft6236: ft6236@38 { - compatible = "focaltech,ft6236"; - reg = <0x38>; - - interrupt-parent = <&gpio>; - interrupts = <24 2>; - touchscreen-size-x = <240>; - touchscreen-size-y = <320>; - }; - }; - }; - - __overrides__ { - speed = <&pitft>,"spi-max-frequency:0"; - rotate = <&pitft>,"rotate:0"; - fps = <&pitft>,"fps:0"; - debug = <&pitft>,"debug:0"; - touch-sizex = <&ft6236>,"touchscreen-size-x?"; - touch-sizey = <&ft6236>,"touchscreen-size-y?"; - touch-invx = <&ft6236>,"touchscreen-inverted-x?"; - touch-invy = <&ft6236>,"touchscreen-inverted-y?"; - touch-swapxy = <&ft6236>,"touchscreen-swapped-x-y?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pitft28-resistive-overlay.dts b/arch/arm64/boot/dts/overlays/pitft28-resistive-overlay.dts deleted file mode 100644 index 4a4a3f44c29d5ce6518a94e243c4805c5a0edb8a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pitft28-resistive-overlay.dts +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Device Tree overlay for Adafruit PiTFT 2.8" resistive touch screen - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - pitft_pins: pitft_pins { - brcm,pins = <24 25>; - brcm,function = <0 1>; /* in out */ - brcm,pull = <2 0>; /* pullup none */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pitft: pitft@0{ - compatible = "ilitek,ili9340"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pitft_pins>; - - spi-max-frequency = <32000000>; - rotate = <90>; - fps = <25>; - bgr; - buswidth = <8>; - dc-gpios = <&gpio 25 0>; - debug = <0>; - }; - - pitft_ts@1 { - compatible = "st,stmpe610"; - reg = <1>; - - spi-max-frequency = <500000>; - irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ - interrupts = <24 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - interrupt-controller; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <2>; - st,ave-ctrl = <3>; - st,touch-det-delay = <4>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <0>; - }; - - stmpe_gpio: stmpe_gpio { - #gpio-cells = <2>; - compatible = "st,stmpe-gpio"; - /* - * only GPIO2 is wired/available - * and it is wired to the backlight - */ - st,norequest-mask = <0x7b>; - }; - }; - }; - }; - - fragment@5 { - target-path = "/soc"; - __overlay__ { - backlight { - compatible = "gpio-backlight"; - gpios = <&stmpe_gpio 2 0>; - default-on; - }; - }; - }; - - __overrides__ { - speed = <&pitft>,"spi-max-frequency:0"; - rotate = <&pitft>,"rotate:0"; - fps = <&pitft>,"fps:0"; - debug = <&pitft>,"debug:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pitft35-resistive-overlay.dts b/arch/arm64/boot/dts/overlays/pitft35-resistive-overlay.dts deleted file mode 100644 index 37629f18a74001f489e0e731347bff22380e638a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pitft35-resistive-overlay.dts +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Device Tree overlay for Adafruit PiTFT 3.5" resistive touch screen - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - pitft_pins: pitft_pins { - brcm,pins = <24 25>; - brcm,function = <0 1>; /* in out */ - brcm,pull = <2 0>; /* pullup none */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pitft: pitft@0{ - compatible = "himax,hx8357d", "adafruit,yx350hv15"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pitft_pins>; - - spi-max-frequency = <32000000>; - rotate = <90>; - fps = <25>; - bgr; - buswidth = <8>; - dc-gpios = <&gpio 25 0>; - debug = <0>; - }; - - pitft_ts@1 { - compatible = "st,stmpe610"; - reg = <1>; - - spi-max-frequency = <500000>; - irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ - interrupts = <24 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - interrupt-controller; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <2>; - st,ave-ctrl = <3>; - st,touch-det-delay = <4>; - st,settling = <2>; - st,fraction-z = <7>; - st,i-drive = <0>; - }; - - stmpe_gpio: stmpe_gpio { - #gpio-cells = <2>; - compatible = "st,stmpe-gpio"; - /* - * only GPIO2 is wired/available - * and it is wired to the backlight - */ - st,norequest-mask = <0x7b>; - }; - }; - }; - }; - - fragment@5 { - target-path = "/soc"; - __overlay__ { - backlight { - compatible = "gpio-backlight"; - gpios = <&stmpe_gpio 2 0>; - default-on; - }; - }; - }; - - __overrides__ { - speed = <&pitft>,"spi-max-frequency:0"; - rotate = <&pitft>,"rotate:0"; - fps = <&pitft>,"fps:0"; - debug = <&pitft>,"debug:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pps-gpio-overlay.dts b/arch/arm64/boot/dts/overlays/pps-gpio-overlay.dts deleted file mode 100644 index 524a1c1d367009c0dae1bb8039e64b152f833dd4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pps-gpio-overlay.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - fragment@0 { - target-path = "/"; - __overlay__ { - pps: pps@12 { - compatible = "pps-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pps_pins>; - gpios = <&gpio 18 0>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - pps_pins: pps_pins@12 { - brcm,pins = <18>; - brcm,function = <0>; // in - brcm,pull = <0>; // off - }; - }; - }; - - __overrides__ { - gpiopin = <&pps>,"gpios:4", - <&pps>,"reg:0", - <&pps_pins>,"brcm,pins:0", - <&pps_pins>,"reg:0"; - assert_falling_edge = <&pps>,"assert-falling-edge?"; - capture_clear = <&pps>,"capture-clear?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pwm-2chan-overlay.dts b/arch/arm64/boot/dts/overlays/pwm-2chan-overlay.dts deleted file mode 100644 index 4ddbbfa040658d21ffdeb29ccaafc49c86c3c9d3..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pwm-2chan-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -/dts-v1/; -/plugin/; - -/* -This is the 2-channel overlay - only use it if you need both channels. - -Legal pin,function combinations for each channel: - PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) - PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) - -N.B.: - 1) Pin 18 is the only one available on all platforms, and - it is the one used by the I2S audio interface. - Pins 12 and 13 might be better choices on an A+, B+ or Pi2. - 2) The onboard analogue audio output uses both PWM channels. - 3) So be careful mixing audio and PWM. -*/ - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - pwm_pins: pwm_pins { - brcm,pins = <18 19>; - brcm,function = <2 2>; /* Alt5 */ - }; - }; - }; - - fragment@1 { - target = <&pwm>; - frag1: __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - assigned-clock-rates = <100000000>; - status = "okay"; - }; - }; - - __overrides__ { - pin = <&pwm_pins>,"brcm,pins:0"; - pin2 = <&pwm_pins>,"brcm,pins:4"; - func = <&pwm_pins>,"brcm,function:0"; - func2 = <&pwm_pins>,"brcm,function:4"; - clock = <&frag1>,"assigned-clock-rates:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pwm-ir-tx-overlay.dts b/arch/arm64/boot/dts/overlays/pwm-ir-tx-overlay.dts deleted file mode 100644 index 119caf746b3b3b8017b1d726cb192b281a8b2d40..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pwm-ir-tx-overlay.dts +++ /dev/null @@ -1,40 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - pwm0_pins: pwm0_pins { - brcm,pins = <18>; - brcm,function = <2>; /* Alt5 */ - }; - }; - }; - - fragment@1 { - target = <&pwm>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; - }; - }; - - fragment@2 { - target-path = "/"; - __overlay__ { - pwm-ir-transmitter { - compatible = "pwm-ir-tx"; - pwms = <&pwm 0 100>; - }; - }; - }; - - __overrides__ { - gpio_pin = <&pwm0_pins>, "brcm,pins:0"; - func = <&pwm0_pins>,"brcm,function:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/pwm-overlay.dts b/arch/arm64/boot/dts/overlays/pwm-overlay.dts deleted file mode 100644 index 92876ab3bc8c5e046920898e1f879b231fc68ac5..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/pwm-overlay.dts +++ /dev/null @@ -1,45 +0,0 @@ -/dts-v1/; -/plugin/; - -/* -Legal pin,function combinations for each channel: - PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1) - PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1) - -N.B.: - 1) Pin 18 is the only one available on all platforms, and - it is the one used by the I2S audio interface. - Pins 12 and 13 might be better choices on an A+, B+ or Pi2. - 2) The onboard analogue audio output uses both PWM channels. - 3) So be careful mixing audio and PWM. -*/ - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - pwm_pins: pwm_pins { - brcm,pins = <18>; - brcm,function = <2>; /* Alt5 */ - }; - }; - }; - - fragment@1 { - target = <&pwm>; - frag1: __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&pwm_pins>; - assigned-clock-rates = <100000000>; - status = "okay"; - }; - }; - - __overrides__ { - pin = <&pwm_pins>,"brcm,pins:0"; - func = <&pwm_pins>,"brcm,function:0"; - clock = <&frag1>,"assigned-clock-rates:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/qca7000-overlay.dts b/arch/arm64/boot/dts/overlays/qca7000-overlay.dts deleted file mode 100644 index 9a451202a2eb7f432d688331474e99c09f385c0b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/qca7000-overlay.dts +++ /dev/null @@ -1,55 +0,0 @@ -// Overlay for the Qualcomm Atheros QCA7000 on I2SE's PLC Stamp micro EVK -// Visit: https://www.i2se.com/product/plc-stamp-micro-evk for details - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - eth1: qca7000@0 { - compatible = "qca,qca7000"; - reg = <0>; /* CE0 */ - pinctrl-names = "default"; - pinctrl-0 = <ð1_pins>; - interrupt-parent = <&gpio>; - interrupts = <23 0x1>; /* rising edge */ - spi-max-frequency = <12000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - eth1_pins: eth1_pins { - brcm,pins = <23>; - brcm,function = <0>; /* in */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - __overrides__ { - int_pin = <ð1>, "interrupts:0", - <ð1_pins>, "brcm,pins:0"; - speed = <ð1>, "spi-max-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rotary-encoder-overlay.dts b/arch/arm64/boot/dts/overlays/rotary-encoder-overlay.dts deleted file mode 100644 index ea1d952734e9f981e7f4eeb930ed5227d0f8ca9e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rotary-encoder-overlay.dts +++ /dev/null @@ -1,59 +0,0 @@ -// Device tree overlay for GPIO connected rotary encoder. -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - rotary_pins: rotary_pins@4 { - brcm,pins = <4 17>; /* gpio 4 17 */ - brcm,function = <0 0>; /* input */ - brcm,pull = <2 2>; /* pull-up */ - }; - - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - rotary: rotary@4 { - compatible = "rotary-encoder"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rotary_pins>; - gpios = <&gpio 4 0>, <&gpio 17 0>; - linux,axis = <0>; /* REL_X */ - rotary-encoder,encoding = "gray"; - rotary-encoder,steps = <24>; /* 24 default */ - rotary-encoder,steps-per-period = <1>; /* corresponds to full period mode. See README */ - }; - }; - - }; - - __overrides__ { - pin_a = <&rotary>,"gpios:4", - <&rotary_pins>,"brcm,pins:0", - /* modify reg values to allow multiple instantiation */ - <&rotary>,"reg:0", - <&rotary_pins>,"reg:0"; - pin_b = <&rotary>,"gpios:16", - <&rotary_pins>,"brcm,pins:4"; - relative_axis = <&rotary>,"rotary-encoder,relative-axis?"; - linux_axis = <&rotary>,"linux,axis:0"; - rollover = <&rotary>,"rotary-encoder,rollover?"; - steps-per-period = <&rotary>,"rotary-encoder,steps-per-period:0"; - steps = <&rotary>,"rotary-encoder,steps:0"; - wakeup = <&rotary>,"wakeup-source?"; - encoding = <&rotary>,"rotary-encoder,encoding"; - /* legacy parameters*/ - rotary0_pin_a = <&rotary>,"gpios:4", - <&rotary_pins>,"brcm,pins:0"; - rotary0_pin_b = <&rotary>,"gpios:16", - <&rotary_pins>,"brcm,pins:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-backlight-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-backlight-overlay.dts deleted file mode 100644 index cac5e44c6ec54a587fc4aadc4d5bfc0692179054..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-backlight-overlay.dts +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Devicetree overlay for mailbox-driven Raspberry Pi DSI Display - * backlight controller - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - rpi_backlight: rpi_backlight { - compatible = "raspberrypi,rpi-backlight"; - firmware = <&firmware>; - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts deleted file mode 100644 index e2c25a0535e686a60f5af71b1f06793e39b69485..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-cirrus-wm5102-overlay.dts +++ /dev/null @@ -1,152 +0,0 @@ -// Definitions for the Cirrus Logic Audio Card -/dts-v1/; -/plugin/; -#include -#include -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - wlf_pins: wlf_pins { - brcm,pins = <17 22 27 8>; - brcm,function = < - BCM2835_FSEL_GPIO_OUT - BCM2835_FSEL_GPIO_OUT - BCM2835_FSEL_GPIO_IN - BCM2835_FSEL_GPIO_OUT - >; - }; - }; - }; - - fragment@2 { - target-path = "/"; - __overlay__ { - rpi_cirrus_reg_1v8: rpi_cirrus_reg_1v8 { - compatible = "regulator-fixed"; - regulator-name = "RPi-Cirrus 1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; - - fragment@3 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@4 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@5 { - target = <&spi0>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm5102@1{ - compatible = "wlf,wm5102"; - reg = <1>; - - spi-max-frequency = <500000>; - - interrupt-parent = <&gpio>; - interrupts = <27 8>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-controller; - #gpio-cells = <2>; - - LDOVDD-supply = <&rpi_cirrus_reg_1v8>; - AVDD-supply = <&rpi_cirrus_reg_1v8>; - DBVDD1-supply = <&rpi_cirrus_reg_1v8>; - DBVDD2-supply = <&vdd_3v3_reg>; - DBVDD3-supply = <&vdd_3v3_reg>; - CPVDD-supply = <&rpi_cirrus_reg_1v8>; - SPKVDDL-supply = <&vdd_5v0_reg>; - SPKVDDR-supply = <&vdd_5v0_reg>; - DCVDD-supply = <&arizona_ldo1>; - - wlf,reset = <&gpio 17 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpio 22 GPIO_ACTIVE_HIGH>; - wlf,gpio-defaults = < - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - ARIZONA_GP_DEFAULT - >; - wlf,micd-configs = <0 1 0>; - wlf,dmic-ref = < - ARIZONA_DMIC_MICVDD - ARIZONA_DMIC_MICBIAS2 - ARIZONA_DMIC_MICVDD - ARIZONA_DMIC_MICVDD - >; - wlf,inmode = < - ARIZONA_INMODE_DIFF - ARIZONA_INMODE_DMIC - ARIZONA_INMODE_SE - ARIZONA_INMODE_DIFF - >; - status = "okay"; - - arizona_ldo1: ldo1 { - regulator-name = "LDO1"; - // default constraints as in - // arizona-ldo1.c - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1800000>; - }; - }; - }; - }; - - fragment@6 { - target = <&i2c1>; - __overlay__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - wm8804@3b { - compatible = "wlf,wm8804"; - reg = <0x3b>; - status = "okay"; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - wlf,reset-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; - }; - }; - }; - - fragment@7 { - target = <&sound>; - __overlay__ { - compatible = "wlf,rpi-cirrus"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-dac-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-dac-overlay.dts deleted file mode 100644 index 07a915342702fc02a78d24deaa2a96869911ba00..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-dac-overlay.dts +++ /dev/null @@ -1,34 +0,0 @@ -// Definitions for RPi DAC -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - pcm1794a-codec { - #sound-dai-cells = <0>; - compatible = "ti,pcm1794a"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "rpi,rpi-dac"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-display-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-display-overlay.dts deleted file mode 100644 index a5eed07d6a4b446a90eed4ca770b71dcb387d6bd..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-display-overlay.dts +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Device Tree overlay for rpi-display by Watterott - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - rpi_display_pins: rpi_display_pins { - brcm,pins = <18 23 24 25>; - brcm,function = <1 1 1 0>; /* out out out in */ - brcm,pull = <0 0 0 2>; /* - - - up */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - rpidisplay: rpi-display@0{ - compatible = "ilitek,ili9341"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&rpi_display_pins>; - - spi-max-frequency = <32000000>; - rotate = <270>; - bgr; - fps = <30>; - buswidth = <8>; - reset-gpios = <&gpio 23 0>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 18 1>; - debug = <0>; - }; - - rpidisplay_ts: rpi-display-ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - - spi-max-frequency = <2000000>; - interrupts = <25 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 25 0>; - ti,x-plate-ohms = /bits/ 16 <60>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - __overrides__ { - speed = <&rpidisplay>,"spi-max-frequency:0"; - rotate = <&rpidisplay>,"rotate:0"; - fps = <&rpidisplay>,"fps:0"; - debug = <&rpidisplay>,"debug:0"; - xohms = <&rpidisplay_ts>,"ti,x-plate-ohms;0"; - swapxy = <&rpidisplay_ts>,"ti,swap-xy?"; - backlight = <&rpidisplay>,"led-gpios:4", - <&rpi_display_pins>,"brcm,pins:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-ft5406-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-ft5406-overlay.dts deleted file mode 100644 index fd81a086a21b2af1c2df1497dec9fedb8b937a7c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-ft5406-overlay.dts +++ /dev/null @@ -1,30 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - rpi_ft5406: rpi_ft5406 { - compatible = "rpi,rpi-ft5406"; - firmware = <&firmware>; - status = "okay"; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x = <0>; - touchscreen-inverted-y = <0>; - touchscreen-swapped-x-y = <0>; - }; - }; - }; - - __overrides__ { - touchscreen-size-x = <&rpi_ft5406>,"touchscreen-size-x:0"; - touchscreen-size-y = <&rpi_ft5406>,"touchscreen-size-y:0"; - touchscreen-inverted-x = <&rpi_ft5406>,"touchscreen-inverted-x:0"; - touchscreen-inverted-y = <&rpi_ft5406>,"touchscreen-inverted-y:0"; - touchscreen-swapped-x-y = <&rpi_ft5406>,"touchscreen-swapped-x-y:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-poe-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-poe-overlay.dts deleted file mode 100644 index 21f8fe6f12295e30294bf9189a418db2a155ff39..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-poe-overlay.dts +++ /dev/null @@ -1,70 +0,0 @@ -/* - * Overlay for the Raspberry Pi POE HAT. - */ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - fan0: rpi-poe-fan@0 { - compatible = "raspberrypi,rpi-poe-fan"; - firmware = <&firmware>; - cooling-min-state = <0>; - cooling-max-state = <2>; - #cooling-cells = <2>; - cooling-levels = <0 150 255>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&cpu_thermal>; - __overlay__ { - trips { - trip0: trip0 { - temperature = <50000>; - hysteresis = <5000>; - type = "active"; - }; - trip1: trip1 { - - temperature = <55000>; - hysteresis = <5000>; - type = "active"; - }; - }; - cooling-maps { - map0 { - trip = <&trip0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&trip1>; - cooling-device = <&fan0 1 2>; - }; - }; - }; - }; - - fragment@2 { - target-path = "/__overrides__"; - __overlay__ { - poe_fan_temp0 = <&trip0>,"temperature:0"; - poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; - poe_fan_temp1 = <&trip1>,"temperature:0"; - poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; - }; - }; - - __overrides__ { - poe_fan_temp0 = <&trip0>,"temperature:0"; - poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; - poe_fan_temp1 = <&trip1>,"temperature:0"; - poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-proto-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-proto-overlay.dts deleted file mode 100644 index 9cda044a0f62a3149b9ac8944d92088081076193..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-proto-overlay.dts +++ /dev/null @@ -1,39 +0,0 @@ -// Definitions for Rpi-Proto -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8731@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8731"; - reg = <0x1a>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "rpi,rpi-proto"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-sense-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-sense-overlay.dts deleted file mode 100644 index 89d8d2ea6b2e76a0eda822779f22e73fa45b57e9..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-sense-overlay.dts +++ /dev/null @@ -1,47 +0,0 @@ -// rpi-sense HAT -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - rpi-sense@46 { - compatible = "rpi,rpi-sense"; - reg = <0x46>; - keys-int-gpios = <&gpio 23 1>; - status = "okay"; - }; - - lsm9ds1-magn@1c { - compatible = "st,lsm9ds1-magn"; - reg = <0x1c>; - status = "okay"; - }; - - lsm9ds1-accel6a { - compatible = "st,lsm9ds1-accel"; - reg = <0x6a>; - status = "okay"; - }; - - lps25h-press@5c { - compatible = "st,lps25h-press"; - reg = <0x5c>; - status = "okay"; - }; - - hts221-humid@5f { - compatible = "st,hts221-humid", "st,hts221"; - reg = <0x5f>; - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/rpi-tv-overlay.dts b/arch/arm64/boot/dts/overlays/rpi-tv-overlay.dts deleted file mode 100644 index 3c97a545d8207b7996b882f1c829a007d2975733..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rpi-tv-overlay.dts +++ /dev/null @@ -1,34 +0,0 @@ -// rpi-tv HAT - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - cxd2880@0 { - compatible = "sony,cxd2880"; - reg = <0>; /* CE0 */ - spi-max-frequency = <50000000>; - status = "okay"; - }; - }; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts b/arch/arm64/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts deleted file mode 100644 index 87e9a326eff1f0f847f02694d1e09fcbf60d7626..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +++ /dev/null @@ -1,49 +0,0 @@ -// Definitions for RRA DigiDAC1 Audio card -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - wm8804@3b { - #sound-dai-cells = <0>; - compatible = "wlf,wm8804"; - reg = <0x3b>; - status = "okay"; - PVDD-supply = <&vdd_3v3_reg>; - DVDD-supply = <&vdd_3v3_reg>; - }; - - wm8742: wm8741@1a { - compatible = "wlf,wm8741"; - reg = <0x1a>; - status = "okay"; - AVDD-supply = <&vdd_5v0_reg>; - DVDD-supply = <&vdd_3v3_reg>; - }; - }; - }; - - fragment@2 { - target = <&sound>; - __overlay__ { - compatible = "rra,digidac1-soundcard"; - i2s-controller = <&i2s>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sc16is750-i2c-overlay.dts b/arch/arm64/boot/dts/overlays/sc16is750-i2c-overlay.dts deleted file mode 100644 index 16fe0d08cef1b779a246950d0999f12b1a71b6c1..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sc16is750-i2c-overlay.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_arm>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - sc16is750: sc16is750@48 { - compatible = "nxp,sc16is750"; - reg = <0x48>; /* address */ - clocks = <&sc16is750_clk>; - interrupt-parent = <&gpio>; - interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ - #gpio-cells = <2>; - - sc16is750_clk: sc16is750_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <14745600>; - }; - }; - }; - }; - - - __overrides__ { - int_pin = <&sc16is750>,"interrupts:0"; - addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name"; - xtal = <&sc16is750_clk>,"clock-frequency:0"; - }; - -}; diff --git a/arch/arm64/boot/dts/overlays/sc16is752-i2c-overlay.dts b/arch/arm64/boot/dts/overlays/sc16is752-i2c-overlay.dts deleted file mode 100644 index 57ae35c3844259fa105fe5ae604e292523592788..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sc16is752-i2c-overlay.dts +++ /dev/null @@ -1,40 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - - frag1: __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - sc16is752: sc16is752@48 { - compatible = "nxp,sc16is752"; - reg = <0x48>; // i2c address - clocks = <&sc16is752_clk>; - interrupt-parent = <&gpio>; - interrupts = <24 0x2>; /* IRQ_TYPE_EDGE_FALLING */ - gpio-controller; - #gpio-cells = <0>; - i2c-max-frequency = <400000>; - status = "okay"; - - sc16is752_clk: sc16is752_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <14745600>; - }; - }; - }; - }; - - __overrides__ { - int_pin = <&sc16is752>,"interrupts:0"; - addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name"; - xtal = <&sc16is752_clk>,"clock-frequency:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sc16is752-spi1-overlay.dts b/arch/arm64/boot/dts/overlays/sc16is752-spi1-overlay.dts deleted file mode 100644 index 4e33b14afc78498760a1239237753df9a2dbf496..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sc16is752-spi1-overlay.dts +++ /dev/null @@ -1,61 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi1_pins: spi1_pins { - brcm,pins = <19 20 21>; - brcm,function = <3>; /* alt4 */ - }; - - spi1_cs_pins: spi1_cs_pins { - brcm,pins = <18>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi1>; - frag1: __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins &spi1_cs_pins>; - cs-gpios = <&gpio 18 1>; - status = "okay"; - - sc16is752: sc16is752@0 { - compatible = "nxp,sc16is752"; - reg = <0>; /* CE0 */ - clocks = <&sc16is752_clk>; - interrupt-parent = <&gpio>; - interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */ - #gpio-controller; - #gpio-cells = <2>; - spi-max-frequency = <4000000>; - - sc16is752_clk: sc16is752_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <14745600>; - }; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - int_pin = <&sc16is752>,"interrupts:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sdhost-overlay.dts b/arch/arm64/boot/dts/overlays/sdhost-overlay.dts deleted file mode 100644 index 0b72b4eeac8877e7a432690f210aabf17031de81..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sdhost-overlay.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Provide backwards compatible aliases for the old sdhost dtparams. */ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sdhost>; - frag0: __overlay__ { - brcm,overclock-50 = <0>; - brcm,pio-limit = <1>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&mmc>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&mmcnr>; - __overlay__ { - status = "disabled"; - }; - }; - - __overrides__ { - overclock_50 = <&frag0>,"brcm,overclock-50:0"; - force_pio = <&frag0>,"brcm,force-pio?"; - pio_limit = <&frag0>,"brcm,pio-limit:0"; - debug = <&frag0>,"brcm,debug?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sdio-overlay.dts b/arch/arm64/boot/dts/overlays/sdio-overlay.dts deleted file mode 100644 index 873e490563797a8d0b5c7c7eb12c12da892b008f..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sdio-overlay.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Enable SDIO from MMC interface via various GPIO groups */ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&mmcnr>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&mmc>; - sdio_ovl: __overlay__ { - pinctrl-0 = <&sdio_ovl_pins>; - pinctrl-names = "default"; - non-removable; - bus-width = <4>; - status = "okay"; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - sdio_ovl_pins: sdio_ovl_pins { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = <7>; /* ALT3 = SD1 */ - brcm,pull = <0 2 2 2 2 2>; - }; - }; - }; - - fragment@3 { - target = <&sdio_ovl_pins>; - __dormant__ { - brcm,pins = <22 23 24 25>; - brcm,pull = <0 2 2 2>; - }; - }; - - fragment@4 { - target = <&sdio_ovl_pins>; - __dormant__ { - brcm,pins = <34 35 36 37>; - brcm,pull = <0 2 2 2>; - }; - }; - - fragment@5 { - target = <&sdio_ovl_pins>; - __dormant__ { - brcm,pins = <34 35 36 37 38 39>; - brcm,pull = <0 2 2 2 2 2>; - }; - }; - - fragment@6 { - target-path = "/aliases"; - __overlay__ { - mmc1 = "/soc/mmc@7e300000"; - }; - }; - - __overrides__ { - poll_once = <&sdio_ovl>,"non-removable?"; - bus_width = <&sdio_ovl>,"bus-width:0"; - sdio_overclock = <&sdio_ovl>,"brcm,overclock-50:0"; - gpios_22_25 = <0>,"=3"; - gpios_34_37 = <0>,"=4"; - gpios_34_39 = <0>,"=5"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sdtweak-overlay.dts b/arch/arm64/boot/dts/overlays/sdtweak-overlay.dts deleted file mode 100644 index 38157d2f9bf3b15ba45d1a05f050c120b1a30cdc..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sdtweak-overlay.dts +++ /dev/null @@ -1,25 +0,0 @@ -/dts-v1/; -/plugin/; - -/* Provide backwards compatible aliases for the old sdhost dtparams. */ - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sdhost>; - frag0: __overlay__ { - brcm,overclock-50 = <0>; - brcm,pio-limit = <1>; - }; - }; - - __overrides__ { - overclock_50 = <&frag0>,"brcm,overclock-50:0"; - force_pio = <&frag0>,"brcm,force-pio?"; - pio_limit = <&frag0>,"brcm,pio-limit:0"; - debug = <&frag0>,"brcm,debug?"; - enable = <&frag0>,"status"; - poll_once = <&frag0>,"non-removable?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sh1106-spi-overlay.dts b/arch/arm64/boot/dts/overlays/sh1106-spi-overlay.dts deleted file mode 100644 index 70d7bb6faee94e5033226d4d45d269ab74275a06..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sh1106-spi-overlay.dts +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Device Tree overlay for SH1106 based SPI OLED display - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - sh1106_pins: sh1106_pins { - brcm,pins = <25 24>; - brcm,function = <1 1>; /* out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - sh1106: sh1106@0{ - compatible = "sinowealth,sh1106"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&sh1106_pins>; - - spi-max-frequency = <4000000>; - bgr = <0>; - bpp = <1>; - rotate = <0>; - fps = <25>; - buswidth = <8>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - debug = <0>; - - sinowealth,height = <64>; - sinowealth,width = <128>; - sinowealth,page-offset = <0>; - }; - }; - }; - - __overrides__ { - speed = <&sh1106>,"spi-max-frequency:0"; - rotate = <&sh1106>,"rotate:0"; - fps = <&sh1106>,"fps:0"; - debug = <&sh1106>,"debug:0"; - dc_pin = <&sh1106>,"dc-gpios:4", - <&sh1106_pins>,"brcm,pins:4"; - reset_pin = <&sh1106>,"reset-gpios:4", - <&sh1106_pins>,"brcm,pins:0"; - height = <&sh1106>,"sinowealth,height:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/smi-dev-overlay.dts b/arch/arm64/boot/dts/overlays/smi-dev-overlay.dts deleted file mode 100644 index bafab6c92506d4ffdd191fedfb3ba403f0f815cf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/smi-dev-overlay.dts +++ /dev/null @@ -1,20 +0,0 @@ -// Description: Overlay to enable character device interface for SMI. -// Author: Luke Wren - -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&soc>; - __overlay__ { - smi_dev { - compatible = "brcm,bcm2835-smi-dev"; - smi_handle = <&smi>; - status = "okay"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/smi-nand-overlay.dts b/arch/arm64/boot/dts/overlays/smi-nand-overlay.dts deleted file mode 100644 index ae1e50329d660201ae50a866262123cfdce0ed5e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/smi-nand-overlay.dts +++ /dev/null @@ -1,66 +0,0 @@ -// Description: Overlay to enable NAND flash through -// the secondary memory interface -// Author: Luke Wren - -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&smi>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&smi_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&soc>; - __overlay__ { - nand: flash@0 { - compatible = "brcm,bcm2835-smi-nand"; - smi_handle = <&smi>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - - partition@0 { - label = "stage2"; - // 128k - reg = <0 0x20000>; - read-only; - }; - partition@1 { - label = "firmware"; - // 16M - reg = <0x20000 0x1000000>; - read-only; - }; - partition@2 { - label = "root"; - // 2G (will need to use 64 bit for >=4G) - reg = <0x1020000 0x80000000>; - }; - }; - }; - }; - - fragment@2 { - target = <&gpio>; - __overlay__ { - smi_pins: smi_pins { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 - 12 13 14 15>; - /* Alt 1: SMI */ - brcm,function = <5 5 5 5 5 5 5 5 5 5 5 - 5 5 5 5 5>; - /* /CS, /WE and /OE are pulled high, as they are - generally active low signals */ - brcm,pull = <2 2 2 2 2 2 2 2 0 0 0 0 0 0 0 0>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/smi-overlay.dts b/arch/arm64/boot/dts/overlays/smi-overlay.dts deleted file mode 100644 index bb8c7830df23f3150842fc79329e4a7de1d4e5b7..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/smi-overlay.dts +++ /dev/null @@ -1,37 +0,0 @@ -// Description: Overlay to enable the secondary memory interface peripheral -// Author: Luke Wren - -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&smi>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&smi_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - smi_pins: smi_pins { - /* Don't configure the top two address bits, as - these are already used as ID_SD and ID_SC */ - brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 24 25>; - /* Alt 1: SMI */ - brcm,function = <5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 - 5 5 5 5 5 5 5 5 5>; - /* /CS, /WE and /OE are pulled high, as they are - generally active low signals */ - brcm,pull = <2 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 - 0 0 0 0 0 0 0>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi-gpio35-39-overlay.dts b/arch/arm64/boot/dts/overlays/spi-gpio35-39-overlay.dts deleted file mode 100644 index a132b8637c313e794c63db8d2861e2b6c1671e15..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi-gpio35-39-overlay.dts +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Device tree overlay to move spi0 to gpio 35 to 39 on CM - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - cs-gpios = <&gpio 36 1>, <&gpio 35 1>; - }; - }; - - fragment@1 { - target = <&spi0_cs_pins>; - __overlay__ { - brcm,pins = <36 35>; - }; - }; - - fragment@2 { - target = <&spi0_pins>; - __overlay__ { - brcm,pins = <37 38 39>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi-gpio40-45-overlay.dts b/arch/arm64/boot/dts/overlays/spi-gpio40-45-overlay.dts deleted file mode 100644 index 9ebcaf1b5ea07c8fc782a5b535537c225d07b8c0..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi-gpio40-45-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Boot EEPROM overlay - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&spi0_cs_pins>; - __overlay__ { - brcm,pins = <45 44 43>; - brcm,function = <1>; /* output */ - status = "okay"; - }; - }; - - fragment@2 { - target = <&spi0_pins>; - __overlay__ { - brcm,pins = <40 41 42>; - brcm,function = <3>; /* alt4 */ - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi-rtc-overlay.dts b/arch/arm64/boot/dts/overlays/spi-rtc-overlay.dts deleted file mode 100644 index 9664afc9845c96d2b2555cf861b682b7e392c9c4..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi-rtc-overlay.dts +++ /dev/null @@ -1,33 +0,0 @@ -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spi0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - rtc-pcf2123@0 { - compatible = "nxp,rtc-pcf2123"; - spi-max-frequency = <5000000>; - spi-cs-high = <1>; - reg = <0>; - }; - }; - }; - - __overrides__ { - pcf2123 = <0>, "=0=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi0-cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi0-cs-overlay.dts deleted file mode 100644 index ff41439a483af666845f1b665af207207e814ace..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi0-cs-overlay.dts +++ /dev/null @@ -1,29 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0_cs_pins>; - frag0: __overlay__ { - brcm,pins = <8 7>; - }; - }; - - fragment@1 { - target = <&spi0>; - frag1: __overlay__ { - cs-gpios = <&gpio 8 1>, <&gpio 7 1>; - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&frag0>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi0-hw-cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi0-hw-cs-overlay.dts deleted file mode 100644 index 168a0dc80ad1a7b8dcb92a27d82caed208cd5af6..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi0-hw-cs-overlay.dts +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Device tree overlay to re-enable hardware CS for SPI0 - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - cs-gpios = <0>, <0>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&spi0_cs_pins>; - __overlay__ { - brcm,pins = <8 7>; - brcm,function = <4>; /* alt0 */ - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi1-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi1-1cs-overlay.dts deleted file mode 100644 index ea2794bc5fd5d4c096762dc38c7d247d74dabb0b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi1-1cs-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi1_pins: spi1_pins { - brcm,pins = <19 20 21>; - brcm,function = <3>; /* alt4 */ - }; - - spi1_cs_pins: spi1_cs_pins { - brcm,pins = <18>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi1>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins &spi1_cs_pins>; - cs-gpios = <&gpio 18 1>; - status = "okay"; - - spidev1_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev1_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi1-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi1-2cs-overlay.dts deleted file mode 100644 index dab34ee79ae283b7a022a12ac009f288c704dabf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi1-2cs-overlay.dts +++ /dev/null @@ -1,69 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi1_pins: spi1_pins { - brcm,pins = <19 20 21>; - brcm,function = <3>; /* alt4 */ - }; - - spi1_cs_pins: spi1_cs_pins { - brcm,pins = <18 17>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi1>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins &spi1_cs_pins>; - cs-gpios = <&gpio 18 1>, <&gpio 17 1>; - status = "okay"; - - spidev1_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev1_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev1_0>,"status"; - cs1_spidev = <&spidev1_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi1-3cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi1-3cs-overlay.dts deleted file mode 100644 index bc7e7d04324bdb5f8445e218210077850e4fafff..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi1-3cs-overlay.dts +++ /dev/null @@ -1,81 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi1_pins: spi1_pins { - brcm,pins = <19 20 21>; - brcm,function = <3>; /* alt4 */ - }; - - spi1_cs_pins: spi1_cs_pins { - brcm,pins = <18 17 16>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi1>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins &spi1_cs_pins>; - cs-gpios = <&gpio 18 1>, <&gpio 17 1>, <&gpio 16 1>; - status = "okay"; - - spidev1_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev1_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev1_2: spidev@2 { - compatible = "spidev"; - reg = <2>; /* CE2 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi1_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&spi1_cs_pins>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs2_pin = <&spi1_cs_pins>,"brcm,pins:8", - <&frag1>,"cs-gpios:28"; - cs0_spidev = <&spidev1_0>,"status"; - cs1_spidev = <&spidev1_1>,"status"; - cs2_spidev = <&spidev1_2>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi2-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi2-1cs-overlay.dts deleted file mode 100644 index 2a29750462af85ee675d4e7673df4cab7c2f1a92..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi2-1cs-overlay.dts +++ /dev/null @@ -1,57 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi2_pins: spi2_pins { - brcm,pins = <40 41 42>; - brcm,function = <3>; /* alt4 */ - }; - - spi2_cs_pins: spi2_cs_pins { - brcm,pins = <43>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi2>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins &spi2_cs_pins>; - cs-gpios = <&gpio 43 1>; - status = "okay"; - - spidev2_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev2_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi2-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi2-2cs-overlay.dts deleted file mode 100644 index 642678fc9ddd5f1b5f3e3548ccff36166564562d..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi2-2cs-overlay.dts +++ /dev/null @@ -1,69 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi2_pins: spi2_pins { - brcm,pins = <40 41 42>; - brcm,function = <3>; /* alt4 */ - }; - - spi2_cs_pins: spi2_cs_pins { - brcm,pins = <43 44>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi2>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins &spi2_cs_pins>; - cs-gpios = <&gpio 43 1>, <&gpio 44 1>; - status = "okay"; - - spidev2_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev2_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev2_0>,"status"; - cs1_spidev = <&spidev2_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi2-3cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi2-3cs-overlay.dts deleted file mode 100644 index 28d40c6c3c379e63e750bd6d4193c0525139a571..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi2-3cs-overlay.dts +++ /dev/null @@ -1,81 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&gpio>; - __overlay__ { - spi2_pins: spi2_pins { - brcm,pins = <40 41 42>; - brcm,function = <3>; /* alt4 */ - }; - - spi2_cs_pins: spi2_cs_pins { - brcm,pins = <43 44 45>; - brcm,function = <1>; /* output */ - }; - }; - }; - - fragment@1 { - target = <&spi2>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins &spi2_cs_pins>; - cs-gpios = <&gpio 43 1>, <&gpio 44 1>, <&gpio 45 1>; - status = "okay"; - - spidev2_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev2_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev2_2: spidev@2 { - compatible = "spidev"; - reg = <2>; /* CE2 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&aux>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cs0_pin = <&spi2_cs_pins>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&spi2_cs_pins>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs2_pin = <&spi2_cs_pins>,"brcm,pins:8", - <&frag1>,"cs-gpios:28"; - cs0_spidev = <&spidev2_0>,"status"; - cs1_spidev = <&spidev2_1>,"status"; - cs2_spidev = <&spidev2_2>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi3-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi3-1cs-overlay.dts deleted file mode 100644 index 335af8637051b397f98547497575861079a7cbbb..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi3-1cs-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi3_cs_pins>; - frag0: __overlay__ { - brcm,pins = <0>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi3>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins &spi3_cs_pins>; - cs-gpios = <&gpio 0 1>; - status = "okay"; - - spidev3_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev3_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi3-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi3-2cs-overlay.dts deleted file mode 100644 index ce65da27f767069dd6b431c314c3066edb816904..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi3-2cs-overlay.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi3_cs_pins>; - frag0: __overlay__ { - brcm,pins = <0 24>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi3>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins &spi3_cs_pins>; - cs-gpios = <&gpio 0 1>, <&gpio 24 1>; - status = "okay"; - - spidev3_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev3_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&frag0>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev3_0>,"status"; - cs1_spidev = <&spidev3_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi4-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi4-1cs-overlay.dts deleted file mode 100644 index 85d70b40352b14e06229bc6e828e326b69d3fb40..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi4-1cs-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi4_cs_pins>; - frag0: __overlay__ { - brcm,pins = <4>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi4>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi4_pins &spi4_cs_pins>; - cs-gpios = <&gpio 4 1>; - status = "okay"; - - spidev4_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev4_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi4-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi4-2cs-overlay.dts deleted file mode 100644 index 8bc2215a6a7e97c40d335a8a5abafdd8a1674944..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi4-2cs-overlay.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi4_cs_pins>; - frag0: __overlay__ { - brcm,pins = <4 25>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi4>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi4_pins &spi4_cs_pins>; - cs-gpios = <&gpio 4 1>, <&gpio 25 1>; - status = "okay"; - - spidev4_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev4_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&frag0>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev4_0>,"status"; - cs1_spidev = <&spidev4_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi5-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi5-1cs-overlay.dts deleted file mode 100644 index c0f8cb8510eeeab0ca2444122c135b241f098365..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi5-1cs-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi5_cs_pins>; - frag0: __overlay__ { - brcm,pins = <12>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi5>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi5_pins &spi5_cs_pins>; - cs-gpios = <&gpio 12 1>; - status = "okay"; - - spidev5_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev5_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi5-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi5-2cs-overlay.dts deleted file mode 100644 index 7758b9c00b4e9b93232ceb498776a27d67d4fcce..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi5-2cs-overlay.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi5_cs_pins>; - frag0: __overlay__ { - brcm,pins = <12 26>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi5>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi5_pins &spi5_cs_pins>; - cs-gpios = <&gpio 12 1>, <&gpio 26 1>; - status = "okay"; - - spidev5_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev5_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&frag0>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev5_0>,"status"; - cs1_spidev = <&spidev5_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi6-1cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi6-1cs-overlay.dts deleted file mode 100644 index 8c8a953eca01f1accdc1a5d1b4e94aeaeebd43bf..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi6-1cs-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi6_cs_pins>; - frag0: __overlay__ { - brcm,pins = <18>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi6>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi6_pins &spi6_cs_pins>; - cs-gpios = <&gpio 18 1>; - status = "okay"; - - spidev6_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs0_spidev = <&spidev6_0>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/spi6-2cs-overlay.dts b/arch/arm64/boot/dts/overlays/spi6-2cs-overlay.dts deleted file mode 100644 index 2ff897f21aedb5cbe201356e73ae253896bc8bb1..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/spi6-2cs-overlay.dts +++ /dev/null @@ -1,56 +0,0 @@ -/dts-v1/; -/plugin/; - - -/ { - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&spi6_cs_pins>; - frag0: __overlay__ { - brcm,pins = <18 27>; - brcm,function = <1>; /* output */ - }; - }; - - fragment@1 { - target = <&spi6>; - frag1: __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&spi6_pins &spi6_cs_pins>; - cs-gpios = <&gpio 18 1>, <&gpio 27 1>; - status = "okay"; - - spidev6_0: spidev@0 { - compatible = "spidev"; - reg = <0>; /* CE0 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - - spidev6_1: spidev@1 { - compatible = "spidev"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <125000000>; - status = "okay"; - }; - }; - }; - - __overrides__ { - cs0_pin = <&frag0>,"brcm,pins:0", - <&frag1>,"cs-gpios:4"; - cs1_pin = <&frag0>,"brcm,pins:4", - <&frag1>,"cs-gpios:16"; - cs0_spidev = <&spidev6_0>,"status"; - cs1_spidev = <&spidev6_1>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ssd1306-overlay.dts b/arch/arm64/boot/dts/overlays/ssd1306-overlay.dts deleted file mode 100644 index 84cf10e489d3c62b00524eb4c9d4ccd6ee4a1f1c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ssd1306-overlay.dts +++ /dev/null @@ -1,36 +0,0 @@ -// Overlay for SSD1306 128x64 and 128x32 OLED displays -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - ssd1306: oled@3c{ - compatible = "solomon,ssd1306fb-i2c"; - reg = <0x3c>; - solomon,width = <128>; - solomon,height = <64>; - solomon,page-offset = <0>; - }; - }; - }; - - __overrides__ { - address = <&ssd1306>,"reg:0"; - width = <&ssd1306>,"solomon,width:0"; - height = <&ssd1306>,"solomon,height:0"; - offset = <&ssd1306>,"solomon,page-offset:0"; - normal = <&ssd1306>,"solomon,segment-no-remap?"; - sequential = <&ssd1306>,"solomon,com-seq?"; - remapped = <&ssd1306>,"solomon,com-lrremap?"; - inverted = <&ssd1306>,"solomon,com-invdir?"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ssd1306-spi-overlay.dts b/arch/arm64/boot/dts/overlays/ssd1306-spi-overlay.dts deleted file mode 100644 index 74635705273eb25261d99f973a92a4b5cee73bd2..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ssd1306-spi-overlay.dts +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Device Tree overlay for SSD1306 based SPI OLED display - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - ssd1306_pins: ssd1306_pins { - brcm,pins = <25 24>; - brcm,function = <1 1>; /* out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - ssd1306: ssd1306@0{ - compatible = "solomon,ssd1306"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1306_pins>; - - spi-max-frequency = <10000000>; - bgr = <0>; - bpp = <1>; - rotate = <0>; - fps = <25>; - buswidth = <8>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - debug = <0>; - - solomon,height = <64>; - solomon,width = <128>; - solomon,page-offset = <0>; - }; - }; - }; - - __overrides__ { - speed = <&ssd1306>,"spi-max-frequency:0"; - rotate = <&ssd1306>,"rotate:0"; - fps = <&ssd1306>,"fps:0"; - debug = <&ssd1306>,"debug:0"; - dc_pin = <&ssd1306>,"dc-gpios:4", - <&ssd1306_pins>,"brcm,pins:4"; - reset_pin = <&ssd1306>,"reset-gpios:4", - <&ssd1306_pins>,"brcm,pins:0"; - height = <&ssd1306>,"solomon,height:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/ssd1351-spi-overlay.dts b/arch/arm64/boot/dts/overlays/ssd1351-spi-overlay.dts deleted file mode 100644 index 0eb1451b36c07a2aa905fc0af6ac26c2f3578d74..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/ssd1351-spi-overlay.dts +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Device Tree overlay for SSD1351 based SPI OLED display - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - ssd1351_pins: ssd1351_pins { - brcm,pins = <25 24>; - brcm,function = <1 1>; /* out out */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - ssd1351: ssd1351@0{ - compatible = "solomon,ssd1351"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1351_pins>; - - spi-max-frequency = <4500000>; - bgr = <0>; - bpp = <16>; - rotate = <0>; - fps = <25>; - buswidth = <8>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - debug = <0>; - - solomon,height = <128>; - solomon,width = <128>; - solomon,page-offset = <0>; - }; - }; - }; - - __overrides__ { - speed = <&ssd1351>,"spi-max-frequency:0"; - rotate = <&ssd1351>,"rotate:0"; - fps = <&ssd1351>,"fps:0"; - debug = <&ssd1351>,"debug:0"; - dc_pin = <&ssd1351>,"dc-gpios:4", - <&ssd1351_pins>,"brcm,pins:4"; - reset_pin = <&ssd1351>,"reset-gpios:4", - <&ssd1351_pins>,"brcm,pins:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/superaudioboard-overlay.dts b/arch/arm64/boot/dts/overlays/superaudioboard-overlay.dts deleted file mode 100644 index bad61535981e9ee2a81a8934b1fde883e3143e34..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/superaudioboard-overlay.dts +++ /dev/null @@ -1,73 +0,0 @@ -// Definitions for SuperAudioBoard -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&sound>; - __overlay__ { - compatible = "simple-audio-card"; - i2s-controller = <&i2s>; - status = "okay"; - - simple-audio-card,name = "SuperAudioBoard"; - - simple-audio-card,widgets = - "Line", "Line In", - "Line", "Line Out"; - - simple-audio-card,routing = - "Line Out","AOUTA+", - "Line Out","AOUTA-", - "Line Out","AOUTB+", - "Line Out","AOUTB-", - "AINA","Line In", - "AINB","Line In"; - - simple-audio-card,format = "i2s"; - - simple-audio-card,bitclock-master = <&sound_master>; - simple-audio-card,frame-master = <&sound_master>; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - - sound_master: simple-audio-card,codec { - sound-dai = <&cs4271>; - system-clock-frequency = <24576000>; - }; - }; - }; - - fragment@1 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - cs4271: cs4271@10 { - #sound-dai-cells = <0>; - compatible = "cirrus,cs4271"; - reg = <0x10>; - status = "okay"; - reset-gpio = <&gpio 26 0>; /* Pin 26, active high */ - }; - }; - }; - __overrides__ { - gpiopin = <&cs4271>,"reset-gpio:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/sx150x-overlay.dts b/arch/arm64/boot/dts/overlays/sx150x-overlay.dts deleted file mode 100644 index 1d1069345da21e6cce51f94642ff7a7613818020..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/sx150x-overlay.dts +++ /dev/null @@ -1,1706 +0,0 @@ -// Definitions for SX150x I2C GPIO Expanders from Semtech - -// dtparams: -// sx150-- - Enables SX150X device on I2C# with slave address . may be 1-9. -// may be 0 or 1. Permissible values of (which is denoted in hex) -// depend on the device variant. -// For SX1501, SX1502, SX1504 and SX1505, may be 20 or 21. -// For SX1503 and SX1506, may be 20. -// For SX1507 and SX1509, may be 3E, 3F, 70 or 71. -// For SX1508, may be 20, 21, 22 or 23. -// sx150---int-gpio - Integer, enables interrupts on SX150X device on I2C# with slave address , -// specifies the GPIO pin to which NINT output of SX150X is connected. -// -// -// Example 1: A single SX1505 device on I2C#1 with its slave address set to 0x20 and NINT output connected to GPIO25: -// dtoverlay=sx150x:sx1505-1-20,sx1505-1-20-int-gpio=25 -// -// Example 2: Two SX1507 devices on I2C#0 with their slave addresses set to 0x3E and 0x70 (interrupts not used): -// dtoverlay=sx150x:sx1507-0-3E,sx1507-0-70 - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - // Enable I2C#0 interface - fragment@0 { - target = <&i2c0>; - __dormant__ { - status = "okay"; - }; - }; - - // Enable I2C#1 interface - fragment@1 { - target = <&i2c1>; - __dormant__ { - status = "okay"; - }; - }; - - // Enable a SX1501 on I2C#0 at slave addr 0x20 - fragment@2 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1501_0_20: sx150x@20 { - compatible = "semtech,sx1501q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1501-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1501 on I2C#1 at slave addr 0x20 - fragment@3 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1501_1_20: sx150x@20 { - compatible = "semtech,sx1501q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1501-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1501 on I2C#0 at slave addr 0x21 - fragment@4 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1501_0_21: sx150x@21 { - compatible = "semtech,sx1501q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1501-0-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1501 on I2C#1 at slave addr 0x21 - fragment@5 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1501_1_21: sx150x@21 { - compatible = "semtech,sx1501q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1502 on I2C#0 at slave addr 0x20 - fragment@6 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1502_0_20: sx150x@20 { - compatible = "semtech,sx1502q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1502-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1502 on I2C#1 at slave addr 0x20 - fragment@7 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1502_1_20: sx150x@20 { - compatible = "semtech,sx1502q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1502-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1502 on I2C#0 at slave addr 0x21 - fragment@8 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1502_0_21: sx150x@21 { - compatible = "semtech,sx1502q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1502-0-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1502 on I2C#1 at slave addr 0x21 - fragment@9 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1502_1_21: sx150x@21 { - compatible = "semtech,sx1502q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1501-1-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1503 on I2C#0 at slave addr 0x20 - fragment@10 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1503_0_20: sx150x@20 { - compatible = "semtech,sx1503q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1503-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1503 on I2C#1 at slave addr 0x20 - fragment@11 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1503_1_20: sx150x@20 { - compatible = "semtech,sx1503q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1503-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1504 on I2C#0 at slave addr 0x20 - fragment@12 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1504_0_20: sx150x@20 { - compatible = "semtech,sx1504q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1504-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1504 on I2C#1 at slave addr 0x20 - fragment@13 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1504_1_20: sx150x@20 { - compatible = "semtech,sx1504q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1504 on I2C#0 at slave addr 0x21 - fragment@14 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1504_0_21: sx150x@21 { - compatible = "semtech,sx1504q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1504-0-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1504 on I2C#1 at slave addr 0x21 - fragment@15 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1504_1_21: sx150x@21 { - compatible = "semtech,sx1504q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1504-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1505 on I2C#0 at slave addr 0x20 - fragment@16 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1505_0_20: sx150x@20 { - compatible = "semtech,sx1505q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1505-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1505 on I2C#1 at slave addr 0x20 - fragment@17 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1505_1_20: sx150x@20 { - compatible = "semtech,sx1505q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1505-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1505 on I2C#0 at slave addr 0x21 - fragment@18 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1505_0_21: sx150x@21 { - compatible = "semtech,sx1505q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1505-0-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1505 on I2C#1 at slave addr 0x21 - fragment@19 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1505_1_21: sx150x@21 { - compatible = "semtech,sx1505q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1505-1-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1506 on I2C#0 at slave addr 0x20 - fragment@20 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1506_0_20: sx150x@20 { - compatible = "semtech,sx1506q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1506-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1506 on I2C#1 at slave addr 0x20 - fragment@21 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1506_1_20: sx150x@20 { - compatible = "semtech,sx1506q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1506-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#0 at slave addr 0x3E - fragment@22 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_0_3E: sx150x@3E { - compatible = "semtech,sx1507q"; - reg = <0x3E>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3E-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#1 at slave addr 0x3E - fragment@23 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_1_3E: sx150x@3E { - compatible = "semtech,sx1507q"; - reg = <0x3E>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3E-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#0 at slave addr 0x3F - fragment@24 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_0_3F: sx150x@3F { - compatible = "semtech,sx1507q"; - reg = <0x3F>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507_0_3F-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#1 at slave addr 0x3F - fragment@25 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_1_3F: sx150x@3F { - compatible = "semtech,sx1507q"; - reg = <0x3F>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507_1_3F-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#0 at slave addr 0x70 - fragment@26 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_0_70: sx150x@70 { - compatible = "semtech,sx1507q"; - reg = <0x70>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507-0-70-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#1 at slave addr 0x70 - fragment@27 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_1_70: sx150x@70 { - compatible = "semtech,sx1507q"; - reg = <0x70>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507-1-70-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#0 at slave addr 0x71 - fragment@28 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_0_71: sx150x@71 { - compatible = "semtech,sx1507q"; - reg = <0x71>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507-0-71-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1507 on I2C#1 at slave addr 0x71 - fragment@29 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1507_1_71: sx150x@71 { - compatible = "semtech,sx1507q"; - reg = <0x71>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1507-1-71-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#0 at slave addr 0x20 - fragment@30 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_0_20: sx150x@20 { - compatible = "semtech,sx1508q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-0-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#1 at slave addr 0x20 - fragment@31 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_1_20: sx150x@20 { - compatible = "semtech,sx1508q"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-1-20-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#0 at slave addr 0x21 - fragment@32 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_0_21: sx150x@21 { - compatible = "semtech,sx1508q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-0-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#1 at slave addr 0x21 - fragment@33 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_1_21: sx150x@21 { - compatible = "semtech,sx1508q"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-1-21-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#0 at slave addr 0x22 - fragment@34 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_0_22: sx150x@22 { - compatible = "semtech,sx1508q"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-0-22-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#1 at slave addr 0x22 - fragment@35 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_1_22: sx150x@22 { - compatible = "semtech,sx1508q"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-1-22-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#0 at slave addr 0x23 - fragment@36 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_0_23: sx150x@23 { - compatible = "semtech,sx1508q"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-0-23-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1508 on I2C#1 at slave addr 0x23 - fragment@37 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1508_1_23: sx150x@23 { - compatible = "semtech,sx1508q"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1508-1-23-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#0 at slave addr 0x3E - fragment@38 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_0_3E: sx150x@3E { - compatible = "semtech,sx1509q"; - reg = <0x3E>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3E-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#1 at slave addr 0x3E - fragment@39 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_1_3E: sx150x@3E { - compatible = "semtech,sx1509q"; - reg = <0x3E>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3E-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#0 at slave addr 0x3F - fragment@40 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_0_3F: sx150x@3F { - compatible = "semtech,sx1509q"; - reg = <0x3F>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509_0_3F-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#1 at slave addr 0x3F - fragment@41 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_1_3F: sx150x@3F { - compatible = "semtech,sx1509q"; - reg = <0x3F>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509_1_3F-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#0 at slave addr 0x70 - fragment@42 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_0_70: sx150x@70 { - compatible = "semtech,sx1509q"; - reg = <0x70>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509-0-70-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#1 at slave addr 0x70 - fragment@43 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_1_70: sx150x@70 { - compatible = "semtech,sx1509q"; - reg = <0x70>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509-1-70-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#0 at slave addr 0x71 - fragment@44 { - target = <&i2c0>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_0_71: sx150x@71 { - compatible = "semtech,sx1509q"; - reg = <0x71>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509-0-71-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable a SX1509 on I2C#1 at slave addr 0x71 - fragment@45 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - sx1509_1_71: sx150x@71 { - compatible = "semtech,sx1509q"; - reg = <0x71>; - gpio-controller; - #gpio-cells = <2>; - #interrupt-cells = <2>; - interrupts = <25 2>; /* 1st word overwritten by sx1509-1-71-int-gpio parameter - 2nd word is 2 for falling-edge triggered */ - status = "okay"; - }; - }; - }; - - // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x20 - fragment@46 { - target = <&sx1501_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x20 - fragment@47 { - target = <&sx1501_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1501 on I2C#0 at slave addr 0x21 - fragment@48 { - target = <&sx1501_0_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_21_pins>; - }; - }; - - // Enable interrupts for a SX1501 on I2C#1 at slave addr 0x21 - fragment@49 { - target = <&sx1501_1_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_21_pins>; - }; - }; - - // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x20 - fragment@50 { - target = <&sx1502_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x20 - fragment@51 { - target = <&sx1502_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1502 on I2C#0 at slave addr 0x21 - fragment@52 { - target = <&sx1502_0_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_21_pins>; - }; - }; - - // Enable interrupts for a SX1502 on I2C#1 at slave addr 0x21 - fragment@53 { - target = <&sx1502_1_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_21_pins>; - }; - }; - - // Enable interrupts for a SX1503 on I2C#0 at slave addr 0x20 - fragment@54 { - target = <&sx1503_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1503 on I2C#1 at slave addr 0x20 - fragment@55 { - target = <&sx1503_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x20 - fragment@56 { - target = <&sx1504_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x20 - fragment@57 { - target = <&sx1504_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1504 on I2C#0 at slave addr 0x21 - fragment@58 { - target = <&sx1504_0_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_21_pins>; - }; - }; - - // Enable interrupts for a SX1504 on I2C#1 at slave addr 0x21 - fragment@59 { - target = <&sx1504_1_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_21_pins>; - }; - }; - - // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x20 - fragment@60 { - target = <&sx1505_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x20 - fragment@61 { - target = <&sx1505_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1505 on I2C#0 at slave addr 0x21 - fragment@62 { - target = <&sx1505_0_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_21_pins>; - }; - }; - - // Enable interrupts for a SX1505 on I2C#1 at slave addr 0x21 - fragment@63 { - target = <&sx1505_1_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_21_pins>; - }; - }; - - // Enable interrupts for a SX1506 on I2C#0 at slave addr 0x20 - fragment@64 { - target = <&sx1506_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1506 on I2C#1 at slave addr 0x20 - fragment@65 { - target = <&sx1506_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3E - fragment@66 { - target = <&sx1507_0_3E>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_3E_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3E - fragment@67 { - target = <&sx1507_1_3E>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_3E_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x3F - fragment@68 { - target = <&sx1507_0_3F>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_3F_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x3F - fragment@69 { - target = <&sx1507_1_3F>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_3F_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x70 - fragment@70 { - target = <&sx1507_0_70>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_70_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x70 - fragment@71 { - target = <&sx1507_1_70>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_70_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#0 at slave addr 0x71 - fragment@72 { - target = <&sx1507_0_71>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_71_pins>; - }; - }; - - // Enable interrupts for a SX1507 on I2C#1 at slave addr 0x71 - fragment@73 { - target = <&sx1507_1_71>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_71_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x20 - fragment@74 { - target = <&sx1508_0_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_20_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x20 - fragment@75 { - target = <&sx1508_1_20>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_20_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x21 - fragment@76 { - target = <&sx1508_0_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_21_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x21 - fragment@77 { - target = <&sx1508_1_21>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_21_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x22 - fragment@78 { - target = <&sx1508_0_22>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_22_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x22 - fragment@79 { - target = <&sx1508_1_22>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_22_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#0 at slave addr 0x23 - fragment@80 { - target = <&sx1508_0_23>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_23_pins>; - }; - }; - - // Enable interrupts for a SX1508 on I2C#1 at slave addr 0x23 - fragment@81 { - target = <&sx1508_1_23>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_23_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3E - fragment@82 { - target = <&sx1509_0_3E>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_3E_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3E - fragment@83 { - target = <&sx1509_1_3E>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_3E_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x3F - fragment@84 { - target = <&sx1509_0_3F>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_3F_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x3F - fragment@85 { - target = <&sx1509_1_3F>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_3F_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x70 - fragment@86 { - target = <&sx1509_0_70>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_70_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x70 - fragment@87 { - target = <&sx1509_1_70>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_70_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#0 at slave addr 0x71 - fragment@88 { - target = <&sx1509_0_71>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_0_71_pins>; - }; - }; - - // Enable interrupts for a SX1509 on I2C#1 at slave addr 0x71 - fragment@89 { - target = <&sx1509_1_71>; - __dormant__ { - interrupt-parent = <&gpio>; - interrupt-controller; - pinctrl-names = "default"; - pinctrl-0 = <&sx150x_1_71_pins>; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x20 - // Configure as a input with no pull-up/down - fragment@90 { - target = <&gpio>; - __dormant__ { - sx150x_0_20_pins: sx150x_0_20_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-20-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x20 - // Configure as a input with no pull-up/down - fragment@91 { - target = <&gpio>; - __dormant__ { - sx150x_1_20_pins: sx150x_1_20_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-20-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x21 - // Configure as a input with no pull-up/down - fragment@92 { - target = <&gpio>; - __dormant__ { - sx150x_0_21_pins: sx150x_0_21_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-21-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x21 - // Configure as a input with no pull-up/down - fragment@93 { - target = <&gpio>; - __dormant__ { - sx150x_1_21_pins: sx150x_1_21_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-21-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x22 - // Configure as a input with no pull-up/down - fragment@94 { - target = <&gpio>; - __dormant__ { - sx150x_0_22_pins: sx150x_0_22_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-22-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x22 - // Configure as a input with no pull-up/down - fragment@95 { - target = <&gpio>; - __dormant__ { - sx150x_1_22_pins: sx150x_1_22_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-22-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x23 - // Configure as a input with no pull-up/down - fragment@96 { - target = <&gpio>; - __dormant__ { - sx150x_0_23_pins: sx150x_0_23_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-23-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x23 - // Configure as a input with no pull-up/down - fragment@97 { - target = <&gpio>; - __dormant__ { - sx150x_1_23_pins: sx150x_1_23_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-23-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3E - // Configure as a input with no pull-up/down - fragment@98 { - target = <&gpio>; - __dormant__ { - sx150x_0_3E_pins: sx150x_0_3E_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-3E-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3E - // Configure as a input with no pull-up/down - fragment@99 { - target = <&gpio>; - __dormant__ { - sx150x_1_3E_pins: sx150x_1_3E_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-3E-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x3F - // Configure as a input with no pull-up/down - fragment@100 { - target = <&gpio>; - __dormant__ { - sx150x_0_3F_pins: sx150x_0_3F_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-3F-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x3F - // Configure as a input with no pull-up/down - fragment@101 { - target = <&gpio>; - __dormant__ { - sx150x_1_3F_pins: sx150x_1_3F_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-3F-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x70 - // Configure as a input with no pull-up/down - fragment@102 { - target = <&gpio>; - __dormant__ { - sx150x_0_70_pins: sx150x_0_70_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-70-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x70 - // Configure as a input with no pull-up/down - fragment@103 { - target = <&gpio>; - __dormant__ { - sx150x_1_70_pins: sx150x_1_70_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-70-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#0 interface at slave addr 0x71 - // Configure as a input with no pull-up/down - fragment@104 { - target = <&gpio>; - __dormant__ { - sx150x_0_71_pins: sx150x_0_71_pins { - brcm,pins = <0>; /* overwritten by sx150x-0-71-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - // Configure GPIO pin connected to NINT output of a SX150x on I2C#1 interface at slave addr 0x71 - // Configure as a input with no pull-up/down - fragment@105 { - target = <&gpio>; - __dormant__ { - sx150x_1_71_pins: sx150x_1_71_pins { - brcm,pins = <0>; /* overwritten by sx150x-1-71-int-gpio parameter */ - brcm,function = <0>; - brcm,pull = <0>; - }; - }; - }; - - __overrides__ { - sx1501-0-20 = <0>,"+0+2"; - sx1501-1-20 = <0>,"+1+3"; - sx1501-0-21 = <0>,"+0+4"; - sx1501-1-21 = <0>,"+1+5"; - sx1502-0-20 = <0>,"+0+6"; - sx1502-1-20 = <0>,"+1+7"; - sx1502-0-21 = <0>,"+0+8"; - sx1502-1-21 = <0>,"+1+9"; - sx1503-0-20 = <0>,"+0+10"; - sx1503-1-20 = <0>,"+1+11"; - sx1504-0-20 = <0>,"+0+12"; - sx1504-1-20 = <0>,"+1+13"; - sx1504-0-21 = <0>,"+0+14"; - sx1504-1-21 = <0>,"+1+15"; - sx1505-0-20 = <0>,"+0+16"; - sx1505-1-20 = <0>,"+1+17"; - sx1505-0-21 = <0>,"+0+18"; - sx1505-1-21 = <0>,"+1+19"; - sx1506-0-20 = <0>,"+0+20"; - sx1506-1-20 = <0>,"+1+21"; - sx1507-0-3E = <0>,"+0+22"; - sx1507-1-3E = <0>,"+1+23"; - sx1507-0-3F = <0>,"+0+24"; - sx1507-1-3F = <0>,"+1+25"; - sx1507-0-70 = <0>,"+0+26"; - sx1507-1-70 = <0>,"+1+27"; - sx1507-0-71 = <0>,"+0+28"; - sx1507-1-71 = <0>,"+1+29"; - sx1508-0-20 = <0>,"+0+30"; - sx1508-1-20 = <0>,"+1+31"; - sx1508-0-21 = <0>,"+0+32"; - sx1508-1-21 = <0>,"+1+33"; - sx1508-0-22 = <0>,"+0+34"; - sx1508-1-22 = <0>,"+1+35"; - sx1508-0-23 = <0>,"+0+36"; - sx1508-1-23 = <0>,"+1+37"; - sx1509-0-3E = <0>,"+0+38"; - sx1509-1-3E = <0>,"+1+39"; - sx1509-0-3F = <0>,"+0+40"; - sx1509-1-3F = <0>,"+1+41"; - sx1509-0-70 = <0>,"+0+42"; - sx1509-1-70 = <0>,"+1+43"; - sx1509-0-71 = <0>,"+0+44"; - sx1509-1-71 = <0>,"+1+45"; - sx1501-0-20-int-gpio = <0>,"+46+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1501_0_20>,"interrupts:0"; - sx1501-1-20-int-gpio = <0>,"+47+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1501_1_20>,"interrupts:0"; - sx1501-0-21-int-gpio = <0>,"+48+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1501_0_21>,"interrupts:0"; - sx1501-1-21-int-gpio = <0>,"+49+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1501_1_21>,"interrupts:0"; - sx1502-0-20-int-gpio = <0>,"+50+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1502_0_20>,"interrupts:0"; - sx1502-1-20-int-gpio = <0>,"+51+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1502_1_20>,"interrupts:0"; - sx1502-0-21-int-gpio = <0>,"+52+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1502_0_21>,"interrupts:0"; - sx1502-1-21-int-gpio = <0>,"+53+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1502_1_21>,"interrupts:0"; - sx1503-0-20-int-gpio = <0>,"+54+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1503_0_20>,"interrupts:0"; - sx1503-1-20-int-gpio = <0>,"+55+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1503_1_20>,"interrupts:0"; - sx1504-0-20-int-gpio = <0>,"+56+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1504_0_20>,"interrupts:0"; - sx1504-1-20-int-gpio = <0>,"+57+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1504_1_20>,"interrupts:0"; - sx1504-0-21-int-gpio = <0>,"+58+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1504_0_21>,"interrupts:0"; - sx1504-1-21-int-gpio = <0>,"+59+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1504_1_21>,"interrupts:0"; - sx1505-0-20-int-gpio = <0>,"+60+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1505_0_20>,"interrupts:0"; - sx1505-1-20-int-gpio = <0>,"+61+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1505_1_20>,"interrupts:0"; - sx1505-0-21-int-gpio = <0>,"+62+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1505_0_21>,"interrupts:0"; - sx1505-1-21-int-gpio = <0>,"+63+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1505_1_21>,"interrupts:0"; - sx1506-0-20-int-gpio = <0>,"+64+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1506_0_20>,"interrupts:0"; - sx1506-1-20-int-gpio = <0>,"+65+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1506_1_20>,"interrupts:0"; - sx1507-0-3E-int-gpio = <0>,"+66+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1507_0_3E>,"interrupts:0"; - sx1507-1-3E-int-gpio = <0>,"+67+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0"; - sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0"; - sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0"; - sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0"; - sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0"; - sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0"; - sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0"; - sx1508-0-20-int-gpio = <0>,"+74+90", <&sx150x_0_20_pins>,"brcm,pins:0", <&sx1508_0_20>,"interrupts:0"; - sx1508-1-20-int-gpio = <0>,"+75+91", <&sx150x_1_20_pins>,"brcm,pins:0", <&sx1508_1_20>,"interrupts:0"; - sx1508-0-21-int-gpio = <0>,"+76+92", <&sx150x_0_21_pins>,"brcm,pins:0", <&sx1508_0_21>,"interrupts:0"; - sx1508-1-21-int-gpio = <0>,"+77+93", <&sx150x_1_21_pins>,"brcm,pins:0", <&sx1508_1_21>,"interrupts:0"; - sx1508-0-22-int-gpio = <0>,"+78+94", <&sx150x_0_22_pins>,"brcm,pins:0", <&sx1508_0_22>,"interrupts:0"; - sx1508-1-22-int-gpio = <0>,"+79+95", <&sx150x_1_22_pins>,"brcm,pins:0", <&sx1508_1_22>,"interrupts:0"; - sx1508-0-23-int-gpio = <0>,"+80+96", <&sx150x_0_23_pins>,"brcm,pins:0", <&sx1508_0_23>,"interrupts:0"; - sx1508-1-23-int-gpio = <0>,"+81+97", <&sx150x_1_23_pins>,"brcm,pins:0", <&sx1508_1_23>,"interrupts:0"; - sx1509-0-3E-int-gpio = <0>,"+82+98", <&sx150x_0_3E_pins>,"brcm,pins:0", <&sx1509_0_3E>,"interrupts:0"; - sx1509-1-3E-int-gpio = <0>,"+83+99", <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1509_1_3E>,"interrupts:0"; - sx1509-0-3F-int-gpio = <0>,"+84+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1509_0_3F>,"interrupts:0"; - sx1509-1-3F-int-gpio = <0>,"+85+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1509_1_3F>,"interrupts:0"; - sx1509-0-70-int-gpio = <0>,"+86+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1509_0_70>,"interrupts:0"; - sx1509-1-70-int-gpio = <0>,"+87+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1509_1_70>,"interrupts:0"; - sx1509-0-71-int-gpio = <0>,"+88+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1509_0_71>,"interrupts:0"; - sx1509-1-71-int-gpio = <0>,"+89+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1509_1_71>,"interrupts:0"; - }; -}; - diff --git a/arch/arm64/boot/dts/overlays/tc358743-audio-overlay.dts b/arch/arm64/boot/dts/overlays/tc358743-audio-overlay.dts deleted file mode 100644 index 047695bb0c7152e3a54bec3f620dca3ee259ccae..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/tc358743-audio-overlay.dts +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions to add I2S audio from the Toshiba TC358743 HDMI to CSI2 bridge. -// Requires tc358743 overlay to have been loaded to actually function. -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - tc358743_codec: tc358743-codec { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dir"; - status = "okay"; - }; - }; - }; - - fragment@2 { - target = <&sound>; - sound_overlay: __overlay__ { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "tc358743"; - simple-audio-card,bitclock-master = <&dailink0_slave>; - simple-audio-card,frame-master = <&dailink0_slave>; - status = "okay"; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - dailink0_slave: simple-audio-card,codec { - sound-dai = <&tc358743_codec>; - }; - }; - }; - - __overrides__ { - card-name = <&sound_overlay>,"simple-audio-card,name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/tc358743-overlay.dts b/arch/arm64/boot/dts/overlays/tc358743-overlay.dts deleted file mode 100644 index 2a1a3a80de49376d579eb71576bdd0edf28bc3c2..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/tc358743-overlay.dts +++ /dev/null @@ -1,116 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Definitions for Toshiba TC358743 HDMI to CSI2 bridge on VC I2C bus -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2c_vc>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - tc358743@0f { - compatible = "toshiba,tc358743"; - reg = <0x0f>; - status = "okay"; - - clocks = <&tc358743_clk>; - clock-names = "refclk"; - - tc358743_clk: bridge-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - }; - - port { - tc358743: endpoint { - remote-endpoint = <&csi1_ep>; - clock-lanes = <0>; - clock-noncontinuous; - link-frequencies = - /bits/ 64 <486000000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&csi1>; - __overlay__ { - status = "okay"; - - port { - csi1_ep: endpoint { - remote-endpoint = <&tc358743>; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c_vc>; - __overlay__ { - tc358743@0f { - port { - endpoint { - data-lanes = <1 2>; - }; - }; - }; - }; - }; - - fragment@3 { - target = <&i2c_vc>; - __dormant__ { - tc358743@0f { - port { - endpoint { - data-lanes = <1 2 3 4>; - }; - }; - }; - }; - }; - - fragment@4 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <28 29>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@5 { - target = <&i2c0_pins>; - __overlay__ { - brcm,pins = <44 45>; - brcm,function = <5>; /* alt1 */ - }; - }; - fragment@6 { - target = <&i2c0_pins>; - __dormant__ { - brcm,pins = <0 1>; - brcm,function = <4>; /* alt0 */ - }; - }; - fragment@7 { - target = <&i2c_vc>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - i2c_pins_0_1 = <0>,"-4-5+6"; - i2c_pins_28_29 = <0>,"+4-5-6"; - 4lane = <0>, "-2+3"; - link-frequency = <&tc358743>,"link-frequencies#0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/tinylcd35-overlay.dts b/arch/arm64/boot/dts/overlays/tinylcd35-overlay.dts deleted file mode 100644 index 254ac2e0a21443a182d9b3008d2dfb58fcf1b212..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/tinylcd35-overlay.dts +++ /dev/null @@ -1,222 +0,0 @@ -/* - * tinylcd35-overlay.dts - * - * ------------------------------------------------- - * www.tinlylcd.com - * ------------------------------------------------- - * Device---Driver-----BUS GPIO's - * display tinylcd35 spi0.0 25 24 18 - * touch ads7846 spi0.1 5 - * rtc ds1307 i2c1-0068 - * rtc pcf8563 i2c1-0051 - * keypad gpio-keys --------- 17 22 27 23 28 - * - * - * TinyLCD.com 3.5 inch TFT - * - * Version 001 - * 5/3/2015 -- Noralf Trønnes Initial Device tree framework - * 10/3/2015 -- tinylcd@gmail.com added ds1307 support. - * - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - tinylcd35_pins: tinylcd35_pins { - brcm,pins = <25 24 18>; - brcm,function = <1>; /* out */ - }; - tinylcd35_ts_pins: tinylcd35_ts_pins { - brcm,pins = <5>; - brcm,function = <0>; /* in */ - }; - keypad_pins: keypad_pins { - brcm,pins = <4 17 22 23 27>; - brcm,function = <0>; /* in */ - brcm,pull = <1>; /* down */ - }; - }; - }; - - fragment@4 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - tinylcd35: tinylcd35@0{ - compatible = "neosec,tinylcd"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&tinylcd35_pins>, - <&tinylcd35_ts_pins>; - - spi-max-frequency = <48000000>; - rotate = <270>; - fps = <20>; - bgr; - buswidth = <8>; - reset-gpios = <&gpio 25 0>; - dc-gpios = <&gpio 24 0>; - led-gpios = <&gpio 18 1>; - debug = <0>; - - init = <0x10000B0 0x80 - 0x10000C0 0x0A 0x0A - 0x10000C1 0x01 0x01 - 0x10000C2 0x33 - 0x10000C5 0x00 0x42 0x80 - 0x10000B1 0xD0 0x11 - 0x10000B4 0x02 - 0x10000B6 0x00 0x22 0x3B - 0x10000B7 0x07 - 0x1000036 0x58 - 0x10000F0 0x36 0xA5 0xD3 - 0x10000E5 0x80 - 0x10000E5 0x01 - 0x10000B3 0x00 - 0x10000E5 0x00 - 0x10000F0 0x36 0xA5 0x53 - 0x10000E0 0x00 0x35 0x33 0x00 0x00 0x00 0x00 0x35 0x33 0x00 0x00 0x00 - 0x100003A 0x55 - 0x1000011 - 0x2000001 - 0x1000029>; - }; - - tinylcd35_ts: tinylcd35_ts@1 { - compatible = "ti,ads7846"; - reg = <1>; - status = "disabled"; - - spi-max-frequency = <2000000>; - interrupts = <5 2>; /* high-to-low edge triggered */ - interrupt-parent = <&gpio>; - pendown-gpio = <&gpio 5 0>; - ti,x-plate-ohms = /bits/ 16 <100>; - ti,pressure-max = /bits/ 16 <255>; - }; - }; - }; - - /* RTC */ - - fragment@5 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; - }; - }; - - fragment@6 { - target = <&i2c1>; - __dormant__ { - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - ds1307: ds1307@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - status = "okay"; - }; - }; - }; - - /* - * Values for input event code is found under the - * 'Keys and buttons' heading in include/uapi/linux/input.h - */ - fragment@7 { - target-path = "/soc"; - __overlay__ { - keypad: keypad { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&keypad_pins>; - status = "disabled"; - autorepeat; - - button@17 { - label = "GPIO KEY_UP"; - linux,code = <103>; - gpios = <&gpio 17 0>; - }; - button@22 { - label = "GPIO KEY_DOWN"; - linux,code = <108>; - gpios = <&gpio 22 0>; - }; - button@27 { - label = "GPIO KEY_LEFT"; - linux,code = <105>; - gpios = <&gpio 27 0>; - }; - button@23 { - label = "GPIO KEY_RIGHT"; - linux,code = <106>; - gpios = <&gpio 23 0>; - }; - button@4 { - label = "GPIO KEY_ENTER"; - linux,code = <28>; - gpios = <&gpio 4 0>; - }; - }; - }; - }; - - __overrides__ { - speed = <&tinylcd35>,"spi-max-frequency:0"; - rotate = <&tinylcd35>,"rotate:0"; - fps = <&tinylcd35>,"fps:0"; - debug = <&tinylcd35>,"debug:0"; - touch = <&tinylcd35_ts>,"status"; - touchgpio = <&tinylcd35_ts_pins>,"brcm,pins:0", - <&tinylcd35_ts>,"interrupts:0", - <&tinylcd35_ts>,"pendown-gpio:4"; - xohms = <&tinylcd35_ts>,"ti,x-plate-ohms;0"; - rtc-pcf = <0>,"=5"; - rtc-ds = <0>,"=6"; - keypad = <&keypad>,"status"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/tpm-slb9670-overlay.dts b/arch/arm64/boot/dts/overlays/tpm-slb9670-overlay.dts deleted file mode 100644 index e69188503ca33070169f80ac89aea3b334c8af2a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/tpm-slb9670-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Device Tree overlay for the Infineon SLB9670 Trusted Platform Module add-on - * boards, which can be used as a secure key storage and hwrng. - * available as "Iridium SLB9670" by Infineon and "LetsTrust TPM" by pi3g. - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - slb9670: slb9670@1 { - compatible = "infineon,slb9670"; - reg = <1>; /* CE1 */ - #address-cells = <1>; - #size-cells = <0>; - spi-max-frequency = <32000000>; - status = "okay"; - }; - - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart0-overlay.dts b/arch/arm64/boot/dts/overlays/uart0-overlay.dts deleted file mode 100644 index 73d563bbaabfa7d60b3250689fbe6dbe3b49745b..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart0-overlay.dts +++ /dev/null @@ -1,32 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart0>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - uart0_pins: uart0_pins { - brcm,pins = <14 15>; - brcm,function = <4>; /* alt0 */ - brcm,pull = <0 2>; - }; - }; - }; - - __overrides__ { - txd0_pin = <&uart0_pins>,"brcm,pins:0"; - rxd0_pin = <&uart0_pins>,"brcm,pins:4"; - pin_func = <&uart0_pins>,"brcm,function:0"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart1-overlay.dts b/arch/arm64/boot/dts/overlays/uart1-overlay.dts deleted file mode 100644 index 986d725a265295a7a116c86f8325df190328a47f..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart1-overlay.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&uart1>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - uart1_pins: uart1_pins { - brcm,pins = <14 15>; - brcm,function = <2>; /* alt5 */ - brcm,pull = <0 2>; - }; - }; - }; - - fragment@2 { - target-path = "/chosen"; - __overlay__ { - bootargs = "8250.nr_uarts=1"; - }; - }; - - __overrides__ { - txd1_pin = <&uart1_pins>,"brcm,pins:0"; - rxd1_pin = <&uart1_pins>,"brcm,pins:4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart2-overlay.dts b/arch/arm64/boot/dts/overlays/uart2-overlay.dts deleted file mode 100644 index 9face240aca1f12c22705d9f86fb5c80819707a3..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart2-overlay.dts +++ /dev/null @@ -1,27 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&uart2>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&uart2_pins>; - __dormant__ { - brcm,pins = <0 1 2 3>; - brcm,pull = <0 2 2 0>; - }; - }; - - __overrides__ { - ctsrts = <0>,"=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart3-overlay.dts b/arch/arm64/boot/dts/overlays/uart3-overlay.dts deleted file mode 100644 index ae9f9fe5ea1db21bdb4beeedf8ab155b1b3af12a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart3-overlay.dts +++ /dev/null @@ -1,27 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&uart3>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&uart3_pins>; - __dormant__ { - brcm,pins = <4 5 6 7>; - brcm,pull = <0 2 2 0>; - }; - }; - - __overrides__ { - ctsrts = <0>,"=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart4-overlay.dts b/arch/arm64/boot/dts/overlays/uart4-overlay.dts deleted file mode 100644 index ac004ffbadbf8458675ad968f56369dd60c7522a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart4-overlay.dts +++ /dev/null @@ -1,27 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&uart4>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&uart4_pins>; - __dormant__ { - brcm,pins = <8 9 10 11>; - brcm,pull = <0 2 2 0>; - }; - }; - - __overrides__ { - ctsrts = <0>,"=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/uart5-overlay.dts b/arch/arm64/boot/dts/overlays/uart5-overlay.dts deleted file mode 100644 index 04eaf376effe6a6bcf9f00e4aad48f558e274143..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/uart5-overlay.dts +++ /dev/null @@ -1,27 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2711"; - - fragment@0 { - target = <&uart5>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&uart5_pins>; - __dormant__ { - brcm,pins = <12 13 14 15>; - brcm,pull = <0 2 2 0>; - }; - }; - - __overrides__ { - ctsrts = <0>,"=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/udrc-overlay.dts b/arch/arm64/boot/dts/overlays/udrc-overlay.dts deleted file mode 100644 index ae7c37996894a9349815dd89768462c870d95581..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/udrc-overlay.dts +++ /dev/null @@ -1,128 +0,0 @@ -#include -/* - * Device tree overlay for the Universal Digital Radio Controller - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - fragment@0 { - target = <&i2s>; - __overlay__ { - clocks = <&clocks BCM2835_CLOCK_PCM>; - clock-names = "pcm"; - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - udrc0_ldoin: udrc0_ldoin { - compatible = "regulator-fixed"; - regulator-name = "ldoin"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - }; - - fragment@2 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - clocks = <&clocks BCM2835_CLOCK_VPU>; - clock-frequency = <400000>; - - tlv320aic32x4: tlv320aic32x4@18 { - compatible = "ti,tlv320aic32x4"; - #sound-dai-cells = <0>; - reg = <0x18>; - status = "okay"; - - clocks = <&clocks BCM2835_CLOCK_GP0>; - clock-names = "mclk"; - assigned-clocks = <&clocks BCM2835_CLOCK_GP0>; - assigned-clock-rates = <25000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpclk0_pin &aic3204_reset>; - - reset-gpios = <&gpio 13 0>; - - iov-supply = <&udrc0_ldoin>; - ldoin-supply = <&udrc0_ldoin>; - }; - }; - }; - - fragment@3 { - target = <&sound>; - snd: __overlay__ { - compatible = "simple-audio-card"; - i2s-controller = <&i2s>; - status = "okay"; - - simple-audio-card,name = "udrc"; - simple-audio-card,format = "i2s"; - - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - - simple-audio-card,widgets = - "Line", "Line In", - "Line", "Line Out"; - - simple-audio-card,routing = - "IN1_R", "Line In", - "IN1_L", "Line In", - "CM_L", "Line In", - "CM_R", "Line In", - "Line Out", "LOR", - "Line Out", "LOL"; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic32x4>; - }; - }; - }; - - fragment@4 { - target = <&gpio>; - __overlay__ { - gpclk0_pin: gpclk0_pin { - brcm,pins = <4>; - brcm,function = <4>; - }; - - aic3204_reset: aic3204_reset { - brcm,pins = <13>; - brcm,function = <1>; - brcm,pull = <1>; - }; - - aic3204_gpio: aic3204_gpio { - brcm,pins = <26>; - }; - }; - }; - - __overrides__ { - alsaname = <&snd>, "simple-audio-card,name"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/upstream-overlay.dts b/arch/arm64/boot/dts/overlays/upstream-overlay.dts deleted file mode 100644 index 96837d962188cb05c16748ab0ea3f6909aa1a662..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/upstream-overlay.dts +++ /dev/null @@ -1,131 +0,0 @@ -// redo: ovmerge -c vc4-kms-v3d-overlay.dts,cma-96 dwc2-overlay.dts,dr_mode=otg - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "brcm,bcm2835"; - fragment@0 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=256M"; - }; - }; - fragment@1 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=192M"; - }; - }; - fragment@2 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=128M"; - }; - }; - fragment@3 { - target-path = "/chosen"; - __overlay__ { - bootargs = "cma=96M"; - }; - }; - fragment@4 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=64M"; - }; - }; - fragment@5 { - target = <&i2c2>; - __overlay__ { - status = "okay"; - }; - }; - fragment@6 { - target = <&fb>; - __overlay__ { - status = "disabled"; - }; - }; - fragment@7 { - target = <&pixelvalve0>; - __overlay__ { - status = "okay"; - }; - }; - fragment@8 { - target = <&pixelvalve1>; - __overlay__ { - status = "okay"; - }; - }; - fragment@9 { - target = <&pixelvalve2>; - __overlay__ { - status = "okay"; - }; - }; - fragment@10 { - target = <&hvs>; - __overlay__ { - status = "okay"; - }; - }; - fragment@11 { - target = <&hdmi>; - __overlay__ { - status = "okay"; - }; - }; - fragment@12 { - target = <&v3d>; - __overlay__ { - status = "okay"; - }; - }; - fragment@13 { - target = <&vc4>; - __overlay__ { - status = "okay"; - }; - }; - fragment@14 { - target = <&clocks>; - __overlay__ { - claim-clocks = ; - }; - }; - fragment@15 { - target = <&vec>; - __overlay__ { - status = "okay"; - }; - }; - fragment@16 { - target = <&txp>; - __overlay__ { - status = "okay"; - }; - }; - fragment@17 { - target = <&hdmi>; - __dormant__ { - dmas; - }; - }; - fragment@18 { - target = <&usb>; - #address-cells = <1>; - #size-cells = <1>; - __overlay__ { - compatible = "brcm,bcm2835-usb"; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; - g-rx-fifo-size = <558>; - g-tx-fifo-size = <512 512 512 512 512 256 256>; - status = "okay"; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/vc4-fkms-v3d-overlay.dts b/arch/arm64/boot/dts/overlays/vc4-fkms-v3d-overlay.dts deleted file mode 100644 index d9af97c8414f03940b36be6ffece6f99eb0ac3b9..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +++ /dev/null @@ -1,81 +0,0 @@ -/* - * vc4-fkms-v3d-overlay.dts - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/chosen"; - __overlay__ { - bootargs = "cma=256M"; - }; - }; - - fragment@1 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=192M"; - }; - }; - - fragment@2 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=128M"; - }; - }; - - fragment@3 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=96M"; - }; - }; - - fragment@4 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=64M"; - }; - }; - - fragment@5 { - target = <&fb>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@6 { - target = <&firmwarekms>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@7 { - target = <&v3d>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@8 { - target = <&vc4>; - __overlay__ { - status = "okay"; - }; - }; - - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; - cma-128 = <0>,"-0-1+2-3-4"; - cma-96 = <0>,"-0-1-2+3-4"; - cma-64 = <0>,"-0-1-2-3+4"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts b/arch/arm64/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts deleted file mode 100644 index b03394844abd9b226bf3d7b901f1ce68efc8c33c..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts +++ /dev/null @@ -1,43 +0,0 @@ -/* - * vc4-kms-v3d-overlay.dts - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - panel: panel { - compatible = "ontat,yx700wv03", "simple-panel"; - - port { - panel_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&dpi>; - __overlay__ { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&dpi_18bit_gpio0>; - - port { - dpi_out: endpoint@0 { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/vc4-kms-v3d-overlay.dts b/arch/arm64/boot/dts/overlays/vc4-kms-v3d-overlay.dts deleted file mode 100644 index c5f687e8bcb9a881ee75015692e2cfe8ff8dbc61..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/vc4-kms-v3d-overlay.dts +++ /dev/null @@ -1,152 +0,0 @@ -/* - * vc4-kms-v3d-overlay.dts - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/chosen"; - __overlay__ { - bootargs = "cma=256M"; - }; - }; - - fragment@1 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=192M"; - }; - }; - - fragment@2 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=128M"; - }; - }; - - fragment@3 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=96M"; - }; - }; - - fragment@4 { - target-path = "/chosen"; - __dormant__ { - bootargs = "cma=64M"; - }; - }; - - fragment@5 { - target = <&i2c2>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@6 { - target = <&fb>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@7 { - target = <&pixelvalve0>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@8 { - target = <&pixelvalve1>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@9 { - target = <&pixelvalve2>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@10 { - target = <&hvs>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@11 { - target = <&hdmi>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@12 { - target = <&v3d>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@13 { - target = <&vc4>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@14 { - target = <&clocks>; - __overlay__ { - claim-clocks = < - BCM2835_PLLD_DSI0 - BCM2835_PLLD_DSI1 - BCM2835_PLLH_AUX - BCM2835_PLLH_PIX - >; - }; - }; - - fragment@15 { - target = <&vec>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@16 { - target = <&txp>; - __overlay__ { - status = "okay"; - }; - }; - - fragment@17 { - target = <&hdmi>; - __dormant__ { - dmas; - }; - }; - - __overrides__ { - cma-256 = <0>,"+0-1-2-3-4"; - cma-192 = <0>,"-0+1-2-3-4"; - cma-128 = <0>,"-0-1+2-3-4"; - cma-96 = <0>,"-0-1-2+3-4"; - cma-64 = <0>,"-0-1-2-3+4"; - audio = <0>,"!17"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/vga666-overlay.dts b/arch/arm64/boot/dts/overlays/vga666-overlay.dts deleted file mode 100644 index a4968d180a5d057f66639e43a055424dcbd4578a..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/vga666-overlay.dts +++ /dev/null @@ -1,30 +0,0 @@ -/dts-v1/; -/plugin/; - -/{ - compatible = "brcm,bcm2835"; - - // There is no VGA driver module, but we need a platform device - // node (that doesn't already use pinctrl) to hang the pinctrl - // reference on - leds will do - - fragment@0 { - target = <&leds>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&vga666_pins>; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - vga666_pins: vga666_pins { - brcm,pins = <2 3 4 5 6 7 8 9 10 11 12 - 13 14 15 16 17 18 19 20 21>; - brcm,function = <6>; /* alt2 */ - brcm,pull = <0>; /* no pull */ - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/w1-gpio-overlay.dts b/arch/arm64/boot/dts/overlays/w1-gpio-overlay.dts deleted file mode 100644 index f44e325bc1f2ed288b177a9fb9178b423f21397e..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/w1-gpio-overlay.dts +++ /dev/null @@ -1,40 +0,0 @@ -// Definitions for w1-gpio module (without external pullup) -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - - w1: onewire@0 { - compatible = "w1-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&w1_pins>; - gpios = <&gpio 4 0>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - w1_pins: w1_pins@0 { - brcm,pins = <4>; - brcm,function = <0>; // in (initially) - brcm,pull = <0>; // off - }; - }; - }; - - __overrides__ { - gpiopin = <&w1>,"gpios:4", - <&w1>,"reg:0", - <&w1_pins>,"brcm,pins:0", - <&w1_pins>,"reg:0"; - pullup; // Silently ignore unneeded parameter - }; -}; diff --git a/arch/arm64/boot/dts/overlays/w1-gpio-pullup-overlay.dts b/arch/arm64/boot/dts/overlays/w1-gpio-pullup-overlay.dts deleted file mode 100644 index 953c6a1aeab978d5e92e1123c2056f25956876b0..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/w1-gpio-pullup-overlay.dts +++ /dev/null @@ -1,42 +0,0 @@ -// Definitions for w1-gpio module (with external pullup) -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/"; - __overlay__ { - - w1: onewire@0 { - compatible = "w1-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&w1_pins>; - gpios = <&gpio 4 0>, <&gpio 5 1>; - status = "okay"; - }; - }; - }; - - fragment@1 { - target = <&gpio>; - __overlay__ { - w1_pins: w1_pins@0 { - brcm,pins = <4 5>; - brcm,function = <0 1>; // in out - brcm,pull = <0 0>; // off off - }; - }; - }; - - __overrides__ { - gpiopin = <&w1>,"gpios:4", - <&w1>,"reg:0", - <&w1_pins>,"brcm,pins:0", - <&w1_pins>,"reg:0"; - extpullup = <&w1>,"gpios:16", - <&w1_pins>,"brcm,pins:4"; - pullup; // Silently ignore unneeded parameter - }; -}; diff --git a/arch/arm64/boot/dts/overlays/w5500-overlay.dts b/arch/arm64/boot/dts/overlays/w5500-overlay.dts deleted file mode 100644 index 4d3e662967530859b561b4862664bdee611ebdf1..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/w5500-overlay.dts +++ /dev/null @@ -1,63 +0,0 @@ -// Overlay for the Wiznet w5500 Ethernet Controller -/dts-v1/; -/plugin/; - -/ { - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&spidev0>; - __overlay__ { - status = "disabled"; - }; - }; - - fragment@1 { - target = <&spidev1>; - __dormant__ { - status = "disabled"; - }; - }; - - fragment@2 { - target = <&spi0>; - __overlay__ { - /* needed to avoid dtc warning */ - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - eth1: w5500@0{ - compatible = "wiznet,w5500"; - reg = <0>; /* CE0 */ - pinctrl-names = "default"; - pinctrl-0 = <ð1_pins>; - interrupt-parent = <&gpio>; - interrupts = <25 0x8>; - spi-max-frequency = <30000000>; -// local-mac-address = [aa bb cc dd ee ff]; - status = "okay"; - }; - }; - }; - - fragment@3 { - target = <&gpio>; - __overlay__ { - eth1_pins: eth1_pins { - brcm,pins = <25>; - brcm,function = <0>; /* in */ - brcm,pull = <0>; /* none */ - }; - }; - }; - - __overrides__ { - int_pin = <ð1>, "interrupts:0", - <ð1_pins>, "brcm,pins:0"; - speed = <ð1>, "spi-max-frequency:0"; - cs = <ð1>, "reg:0", - <0>, "!0=1"; - }; -}; diff --git a/arch/arm64/boot/dts/overlays/wittypi-overlay.dts b/arch/arm64/boot/dts/overlays/wittypi-overlay.dts deleted file mode 100644 index 71ce806186deb678ff1e51baf3df875e3b208bab..0000000000000000000000000000000000000000 --- a/arch/arm64/boot/dts/overlays/wittypi-overlay.dts +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Device Tree overlay for Witty Pi extension board by UUGear - * - */ - -/dts-v1/; -/plugin/; - -/ { - - compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&leds>; - __overlay__ { - compatible = "gpio-leds"; - wittypi_led: wittypi_led { - label = "wittypi_led"; - linux,default-trigger = "default-on"; - gpios = <&gpio 17 0>; - }; - }; - }; - - fragment@1 { - target = <&i2c1>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - rtc: ds1337@68 { - compatible = "dallas,ds1337"; - reg = <0x68>; - wakeup-source; - }; - }; - }; - - __overrides__ { - led_gpio = <&wittypi_led>,"gpios:4"; - led_trigger = <&wittypi_led>,"linux,default-trigger"; - }; - -};