diff --git a/CHANGES b/CHANGES index 1dac23ccf9a637541d430642d85ffc5d25d2ecd8..c3813ac35882734962aef49404c182d5cb146700 100644 --- a/CHANGES +++ b/CHANGES @@ -5,6 +5,9 @@ Changes between 0.9.2b and 0.9.3 + *) Remove defunct assembler files from Configure. + [Ulf Möller] + *) SPARC v8 assembler BIGNUM implementation. [Andy Polyakov ] diff --git a/Configure b/Configure index 8687e00e09fcad59b85315d6e9e596c5a4a74121..29f82e759e1d497be0ee220a86d08c7ecb05cf6f 100755 --- a/Configure +++ b/Configure @@ -8,11 +8,12 @@ eval 'exec perl -S $0 ${1+"$@"}' require 5.000; use strict; +# see INSTALL for instructions. # -# see PROBLEMS for instructions on what sort of things to do when -# tracking a bug --tjh -# -# extra options +# Configure options: +# rsaref use RSAref +# no_asm do not use assembler +# 386 generate 80386 code # -DRSAref build to use RSAref # -DNO_IDEA build with no IDEA algorithm # -DNO_RC4 build with no RC4 algorithm @@ -79,39 +80,40 @@ my %table=( #"bl-4c-ri", "$tcc:$tflags:$tlib:${bits1}BN_LLONG RC4_CHAR RC4_INDEX:$tbn_mul::", #"b2-is-ri-dp", "$tcc:$tflags:$tlib:${bits2}IDEA_SHORT RC4_INDEX DES_PTR:$tbn_mul::", -# A few of my development configs +# Our development configs "purify", "purify gcc:-g -DPURIFY -Wall:-lsocket -lnsl::::", "debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:-lefence::::", "debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -O2 -Wall -Wshadow -Werror -pipe:::::", "debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe:::::", "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", "debug-solaris-sparc-gcc","gcc:-O3 -g -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", -"dist", "cc:-O -DNOPROTO::::", +"dist", "cc:-O:::::", # Basic configs that should work on any box "gcc", "gcc:-O3::BN_LLONG:::", -"cc", "cc:-O -DNOPROTO -DNOCONST:::::", +"cc", "cc:-O:::::", -# My solaris setups +# Solaris setups "solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm", -"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", +"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::", + # DO NOT use /xO[34] on sparc with SC3.0. # It is broken, and will not pass the tests "solaris-sparc-cc","cc:-fast -O -Xa -DB_ENDIAN:\ - -lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:asm/sparc.o::", + -lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::", # SC4.0 is ok, better than gcc, except for the bignum stuff. # -fast slows things like DES down quite a lot "solaris-sparc-sc4","cc:-xO5 -Xa -DB_ENDIAN:-lsocket -lnsl:\ - BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparc.o::", + BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", "solaris-usparc-sc4","cc:-xtarget=ultra -xarch=v8plus -Xa -xO5 -DB_ENDIAN:\ -lsocket -lnsl:\ - BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparc.o::", + BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", "solaris-sparc-sc4-pic","cc:-xO5 -Xa -DB_ENDIAN -KPIC:-lsocket -lnsl:\ - BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparc.o::", + BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", # Sunos configs, assuming sparc for the gcc one. -"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::DES_UNROLL:::", +##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::DES_UNROLL:::", "sunos-gcc","gcc:-O3 -mv8::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::", # SGI configurations. If the box is rather old (r3000 cpu), you will @@ -120,22 +122,18 @@ my %table=( # I've recently done 32 and 64 bit mips assember, it make this RSA # 3 times faster, use if at all possible. #"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::", -"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:asm/mips1.o::", -"irix64-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", -"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:asm/mips1.o::", -"irix64-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", -"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN:::asm/r3000.o::", +"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::", +"irix64-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::", +"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::", +"irix64-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:::", +"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN:::::", # This is the n64 mode build. -"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:asm/mips3_64.o::", +"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:::", # HPUX config. I've been building on HPUX 9, so the options may be -# different on version 10. The pa-risc2.o assember file is 2 times -# faster than the old asm/pa-risc.o version but it may not run on old -# PA-RISC CPUs. If you have problems, swap back to the old one. -# Both were generated by gcc, so use the C version with the PA-RISC specific -# options turned on if you are using gcc. -"hpux-cc", "cc:-DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit +O4 -Wl,-a,archive::DES_PTR DES_UNROLL DES_RISC1:asm/pa-risc2.o::", -"hpux-kr-cc", "cc:-DB_ENDIAN -DNOCONST -DNOPROTO -D_HPUX_SOURCE::DES_PTR DES_UNROLL:asm/pa-risc2.o::", +# different on version 10. +"hpux-cc", "cc:-DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit +O4 -Wl,-a,archive::DES_PTR DES_UNROLL DES_RISC1:::", +##"hpux-kr-cc", "cc:-DB_ENDIAN -DNOCONST -DNOPROTO -D_HPUX_SOURCE::DES_PTR DES_UNROLL:::", "hpux-gcc", "gcc:-DB_ENDIAN -O3::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # HPUX from www.globus.org "hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::DES_PTR DES_UNROLL DES_RISC1:::", @@ -144,9 +142,14 @@ my %table=( # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with # the new compiler # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version -"alpha-gcc","gcc:-O3::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::", -"alpha-cc", "cc:-tune host -O4 -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", -"alpha164-cc", "cc:-tune host -fast -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", +"alpha-gcc","gcc:-O3::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:::", +"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::SIXTY_FOUR_BIT_LONG:::", +"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::SIXTY_FOUR_BIT_LONG:::", +# assembler versions -- currently defunct: +##"alpha-gcc","gcc:-O3::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::", +##"alpha-cc", "cc:-tune host -O4 -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", +##"alpha164-cc", "cc:-tune host -fast -readonly_strings::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", +##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::", # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the # bn86-elf.o file file since it is hand tweaked assembler. @@ -225,15 +228,17 @@ my %table=( # CygWin32 "CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:", -# Our old Ultrix box :-). -O2 breaks some of the bignum stuff (now fixed, -# it is a compiler bug, look in bug/ultrixcc.c for example code. -"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN:::asm/mips1.o:::", +# Ultrix from Bernhard Simon +"ultrix","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::::::", +# K&R C is no longer supported; you need gcc on old Ultrix installations +##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::::::", # Some OpenBSD from Bob Beck -"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::", +"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer:SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::", "OpenBSD-x86", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", "OpenBSD", "gcc:-DTERMIOS -O3 -fomit-frame-pointer::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::", "OpenBSD-mips","gcc:-O2 -DL_ENDIAN:BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::", + ); # Miscellaneous hacks: this is designed to allow environments where the "one