[bsp][renesas] Add preliminary ethernet support. (#7204)

bsp/renesas/libraries/HAL_Drivers/SConscript

@@ -50,6 +50,9 @@ if GetDepend(['BSP_USING_ONCHIP_FLASH']):
 if GetDepend(['BSP_USING_PWM']):
     src += ['drv_pwm.c']
 
+if GetDepend(['BSP_USING_ETH']):
+    src += ['drv_eth.c']
+
 if GetDepend(['BSP_USING_CAN']):
     src += ['drv_can.c']
 

bsp/renesas/libraries/HAL_Drivers/drv_eth.c

+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-19     SummerGift   first version
+ * 2018-12-25     zylx         fix some bugs
+ * 2019-06-10     SummerGift   optimize PHY state detection process
+ * 2019-09-03     xiaofan      optimize link change detection process
+ */
+
+#include "drv_config.h"
+#include "drv_eth.h"
+#include <hal_data.h>
+#include <netif/ethernetif.h>
+#include <lwipopts.h>
+
+/*
+* Emac driver uses CubeMX tool to generate emac and phy's configuration,
+* the configuration files can be found in CubeMX_Config folder.
+*/
+
+/* debug option */
+//#define ETH_RX_DUMP
+//#define ETH_TX_DUMP
+#define MINIMUM_ETHERNET_FRAME_SIZE               (60U)
+#define ETH_MAX_PACKET_SIZE 1514
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.eth"
+#ifdef DRV_DEBUG
+    #define DBG_LVL               DBG_LOG
+#else
+    #define DBG_LVL               DBG_INFO
+#endif /* DRV_DEBUG */
+#include <rtdbg.h>
+
+#define MAX_ADDR_LEN 6
+
+#undef PHY_FULL_DUPLEX
+#define PHY_LINK         (1 << 0)
+#define PHY_100M         (1 << 1)
+#define PHY_FULL_DUPLEX  (1 << 2)
+
+struct rt_ra6m3_eth
+{
+    /* inherit from ethernet device */
+    struct eth_device parent;
+#ifndef PHY_USING_INTERRUPT_MODE
+    rt_timer_t poll_link_timer;
+#endif
+
+    /* interface address info, hw address */
+    rt_uint8_t  dev_addr[MAX_ADDR_LEN];
+};
+
+static rt_uint8_t *Rx_Buff, *Tx_Buff;
+//static  ETH_HandleTypeDef EthHandle;
+static struct rt_ra6m3_eth ra6m3_eth_device;
+
+#if defined(ETH_RX_DUMP) || defined(ETH_TX_DUMP)
+#define __is_print(ch) ((unsigned int)((ch) - ' ') < 127u - ' ')
+static void dump_hex(const rt_uint8_t *ptr, rt_size_t buflen)
+{
+    unsigned char *buf = (unsigned char *)ptr;
+    int i, j;
+
+    for (i = 0; i < buflen; i += 16)
+    {
+        rt_kprintf("%08X: ", i);
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%02X ", buf[i + j]);
+            else
+                rt_kprintf("   ");
+        rt_kprintf(" ");
+
+        for (j = 0; j < 16; j++)
+            if (i + j < buflen)
+                rt_kprintf("%c", __is_print(buf[i + j]) ? buf[i + j] : '.');
+        rt_kprintf("\n");
+    }
+}
+#endif
+
+extern void phy_reset(void);
+/* EMAC initialization function */
+static rt_err_t rt_ra6m3_eth_init(rt_device_t dev)
+{
+    fsp_err_t res;
+
+    res = R_ETHER_Open(&g_ether0_ctrl, &g_ether0_cfg);
+    if (res != FSP_SUCCESS)
+        LOG_W("R_ETHER_Open failed!, res = %d", res);
+    return RT_EOK;
+}
+
+static rt_err_t rt_ra6m3_eth_open(rt_device_t dev, rt_uint16_t oflag)
+{
+    LOG_D("emac open");
+    return RT_EOK;
+}
+
+static rt_err_t rt_ra6m3_eth_close(rt_device_t dev)
+{
+    LOG_D("emac close");
+    return RT_EOK;
+}
+
+static rt_ssize_t rt_ra6m3_eth_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
+{
+    LOG_D("emac read");
+    rt_set_errno(-RT_ENOSYS);
+    return 0;
+}
+
+static rt_ssize_t rt_ra6m3_eth_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
+{
+    LOG_D("emac write");
+    rt_set_errno(-RT_ENOSYS);
+    return 0;
+}
+
+static rt_err_t rt_ra6m3_eth_control(rt_device_t dev, int cmd, void *args)
+{
+    switch (cmd)
+    {
+    case NIOCTL_GADDR:
+        /* get mac address */
+        if (args)
+        {
+            SMEMCPY(args, ra6m3_eth_device.dev_addr, 6);
+        }
+        else
+        {
+            return -RT_ERROR;
+        }
+        break;
+
+    default :
+        break;
+    }
+
+    return RT_EOK;
+}
+
+/* ethernet device interface */
+/* transmit data*/
+rt_err_t rt_ra6m3_eth_tx(rt_device_t dev, struct pbuf *p)
+{
+    fsp_err_t res;
+    struct pbuf *q;
+    uint8_t *buffer = Tx_Buff;
+    uint32_t framelength = 0;
+    uint32_t bufferoffset = 0;
+    uint32_t byteslefttocopy = 0;
+    uint32_t payloadoffset = 0;
+    bufferoffset = 0;
+
+    LOG_D("send frame len : %d", p->tot_len);
+
+    /* copy frame from pbufs to driver buffers */
+    for (q = p; q != NULL; q = q->next)
+    {
+        /* Get bytes in current lwIP buffer */
+        byteslefttocopy = q->len;
+        payloadoffset = 0;
+
+        /* Check if the length of data to copy is bigger than Tx buffer size*/
+        while ((byteslefttocopy + bufferoffset) > ETH_TX_BUF_SIZE)
+        {
+            /* Copy data to Tx buffer*/
+            SMEMCPY((uint8_t *)((uint8_t *)buffer + bufferoffset), (uint8_t *)((uint8_t *)q->payload + payloadoffset), (ETH_TX_BUF_SIZE - bufferoffset));
+
+            byteslefttocopy = byteslefttocopy - (ETH_TX_BUF_SIZE - bufferoffset);
+            payloadoffset = payloadoffset + (ETH_TX_BUF_SIZE - bufferoffset);
+            framelength = framelength + (ETH_TX_BUF_SIZE - bufferoffset);
+            bufferoffset = 0;
+        }
+
+        /* Copy the remaining bytes */
+        SMEMCPY((uint8_t *)((uint8_t *)buffer + bufferoffset), (uint8_t *)((uint8_t *)q->payload + payloadoffset), byteslefttocopy);
+        bufferoffset = bufferoffset + byteslefttocopy;
+        framelength = framelength + byteslefttocopy;
+    }
+
+
+#ifdef ETH_TX_DUMP
+    dump_hex(buffer, p->tot_len);
+#endif
+#ifdef ETH_RX_DUMP
+    if (p)
+    {
+        LOG_E("******p buf frame *********");
+        for (q = p; q != NULL; q = q->next)
+        {
+            dump_hex(q->payload, q->len);
+        }
+
+    }
+#endif
+    res = R_ETHER_Write(&g_ether0_ctrl, buffer, p->tot_len);//>MINIMUM_ETHERNET_FRAME_SIZE?p->tot_len:MINIMUM_ETHERNET_FRAME_SIZE);
+    if (res != FSP_SUCCESS)
+        LOG_W("R_ETHER_Write failed!, res = %d", res);
+    return RT_EOK;
+}
+
+/* receive data*/
+struct pbuf *rt_ra6m3_eth_rx(rt_device_t dev)
+{
+    struct pbuf *p = NULL;
+    struct pbuf *q = NULL;
+    uint32_t len = 0;
+    uint8_t *buffer = Rx_Buff;
+    fsp_err_t res;
+
+    res = R_ETHER_Read(&g_ether0_ctrl, buffer, &len);
+    if (res != FSP_SUCCESS)
+        LOG_D("R_ETHER_Read failed!, res = %d", res);
+
+    uint32_t bufferoffset = 0;
+    uint32_t payloadoffset = 0;
+    uint32_t byteslefttocopy = 0;
+
+    LOG_D("receive frame len : %d", len);
+
+    if (len > 0)
+    {
+        /* We allocate a pbuf chain of pbufs from the Lwip buffer pool */
+        p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
+    }
+
+#ifdef ETH_RX_DUMP
+    if (p)
+    {
+        dump_hex(buffer, p->tot_len);
+    }
+#endif
+
+    if (p != NULL)
+    {
+        bufferoffset = 0;
+        for (q = p; q != NULL; q = q->next)
+        {
+            byteslefttocopy = q->len;
+            payloadoffset = 0;
+
+            /* Check if the length of bytes to copy in current pbuf is bigger than Rx buffer size*/
+            while ((byteslefttocopy + bufferoffset) > ETH_RX_BUF_SIZE)
+            {
+                /* Copy data to pbuf */
+                SMEMCPY((uint8_t *)((uint8_t *)q->payload + payloadoffset), (uint8_t *)((uint8_t *)buffer + bufferoffset), (ETH_RX_BUF_SIZE - bufferoffset));
+
+                byteslefttocopy = byteslefttocopy - (ETH_RX_BUF_SIZE - bufferoffset);
+                payloadoffset = payloadoffset + (ETH_RX_BUF_SIZE - bufferoffset);
+                bufferoffset = 0;
+            }
+            /* Copy remaining data in pbuf */
+            SMEMCPY((uint8_t *)((uint8_t *)q->payload + payloadoffset), (uint8_t *)((uint8_t *)buffer + bufferoffset), byteslefttocopy);
+            bufferoffset = bufferoffset + byteslefttocopy;
+        }
+    }
+
+#ifdef ETH_RX_DUMP
+    if (p)
+    {
+        LOG_E("******p buf frame *********");
+        for (q = p; q != NULL; q = q->next)
+        {
+            dump_hex(q->payload, q->len);
+        }
+
+    }
+#endif
+
+
+    return p;
+}
+
+static void phy_linkchange()
+{
+    static uint32_t phy_speed = 0;
+    uint32_t phy_speed_new = 0;
+    fsp_err_t res;
+
+    uint32_t p_local_pause;
+    uint32_t p_partner_pause;
+
+    res = R_ETHER_LinkProcess(&g_ether0_ctrl);
+    if (res != FSP_SUCCESS)
+        LOG_D("R_ETHER_LinkProcess failed!, res = %d", res);
+
+    res = R_ETHER_PHY_LinkStatusGet(&g_ether_phy0_ctrl);
+    if (res != FSP_SUCCESS)
+        LOG_D("R_ETHER_PHY_LinkStatusGet failed!, res = %d", res);
+
+    if(res == FSP_ERR_ETHER_PHY_ERROR_LINK)
+    {
+        LOG_D("link down");
+        eth_device_linkchange(&ra6m3_eth_device.parent, RT_FALSE);
+        return;
+    }
+
+    res = R_ETHER_PHY_LinkPartnerAbilityGet(&g_ether_phy0_ctrl,
+                                        &phy_speed_new,
+                                        &p_local_pause,
+                                        &p_partner_pause);
+    if (res != FSP_SUCCESS)
+    LOG_D("R_ETHER_PHY_LinkPartnerAbilityGet failed!, res = %d", res);
+
+    if(res == FSP_ERR_ETHER_PHY_ERROR_LINK)
+    {
+        LOG_I("link down");
+        eth_device_linkchange(&ra6m3_eth_device.parent, RT_FALSE);
+        return;
+    }
+
+    if (phy_speed != phy_speed_new)
+    {
+        phy_speed = phy_speed_new;
+        if (phy_speed != ETHER_PHY_LINK_SPEED_NO_LINK)
+        {
+            LOG_D("link up");
+            if (phy_speed == ETHER_PHY_LINK_SPEED_100H || phy_speed == ETHER_PHY_LINK_SPEED_100F)
+            {
+                LOG_D("100Mbps");
+            }
+            else
+            {
+                LOG_D("10Mbps");
+            }
+
+            if (phy_speed == ETHER_PHY_LINK_SPEED_100F || phy_speed == ETHER_PHY_LINK_SPEED_10F)
+            {
+                LOG_D("full-duplex");
+            }
+            else
+            {
+                LOG_D("half-duplex");
+            }
+
+            /* send link up. */
+            LOG_I("link up");
+            eth_device_linkchange(&ra6m3_eth_device.parent, RT_TRUE);
+        }
+        else
+        {
+            LOG_D("link down");
+            eth_device_linkchange(&ra6m3_eth_device.parent, RT_FALSE);
+        }
+    }
+}
+
+void user_ether0_callback(ether_callback_args_t * p_args)
+{
+    rt_err_t result;
+        result = eth_device_ready(&(ra6m3_eth_device.parent));
+        if (result != RT_EOK)
+            rt_kprintf("RX err =%d\n", result);
+}
+
+/* Register the EMAC device */
+static int rt_hw_ra6m3_eth_init(void)
+{
+    rt_err_t state = RT_EOK;
+
+    /* Prepare receive and send buffers */
+    Rx_Buff = (rt_uint8_t *)rt_calloc(1, ETH_MAX_PACKET_SIZE);
+    if (Rx_Buff == RT_NULL)
+    {
+        LOG_E("No memory");
+        state = -RT_ENOMEM;
+        goto __exit;
+    }
+
+    Tx_Buff = (rt_uint8_t *)rt_calloc(1, ETH_MAX_PACKET_SIZE);
+    if (Tx_Buff == RT_NULL)
+    {
+        LOG_E("No memory");
+        state = -RT_ENOMEM;
+        goto __exit;
+    }
+
+    /* OUI 00-80-E1 STMICROELECTRONICS. */
+    ra6m3_eth_device.dev_addr[0] = 0x00;
+    ra6m3_eth_device.dev_addr[1] = 0x80;
+    ra6m3_eth_device.dev_addr[2] = 0xE1;
+    /* generate MAC addr from 96bit unique ID (only for test). */
+    ra6m3_eth_device.dev_addr[3] = (10 + 4);
+    ra6m3_eth_device.dev_addr[4] = (10 + 2);
+    ra6m3_eth_device.dev_addr[5] = (10 + 0);
+
+    ra6m3_eth_device.parent.parent.init       = rt_ra6m3_eth_init;
+    ra6m3_eth_device.parent.parent.open       = rt_ra6m3_eth_open;
+    ra6m3_eth_device.parent.parent.close      = rt_ra6m3_eth_close;
+    ra6m3_eth_device.parent.parent.read       = rt_ra6m3_eth_read;
+    ra6m3_eth_device.parent.parent.write      = rt_ra6m3_eth_write;
+    ra6m3_eth_device.parent.parent.control    = rt_ra6m3_eth_control;
+    ra6m3_eth_device.parent.parent.user_data  = RT_NULL;
+
+    ra6m3_eth_device.parent.eth_rx     = rt_ra6m3_eth_rx;
+    ra6m3_eth_device.parent.eth_tx     = rt_ra6m3_eth_tx;
+
+    /* register eth device */
+    state = eth_device_init(&(ra6m3_eth_device.parent), "e0");
+    if (RT_EOK == state)
+    {
+        LOG_D("emac device init success");
+    }
+    else
+    {
+        LOG_E("emac device init faild: %d", state);
+        state = -RT_ERROR;
+        goto __exit;
+    }
+
+    ra6m3_eth_device.poll_link_timer = rt_timer_create("phylnk", (void (*)(void*))phy_linkchange,
+                                        NULL, RT_TICK_PER_SECOND, RT_TIMER_FLAG_PERIODIC);
+    if (!ra6m3_eth_device.poll_link_timer || rt_timer_start(ra6m3_eth_device.poll_link_timer) != RT_EOK)
+    {
+        LOG_E("Start link change detection timer failed");
+    }
+__exit:
+    if (state != RT_EOK)
+    {
+        if (Rx_Buff)
+        {
+            rt_free(Rx_Buff);
+        }
+
+        if (Tx_Buff)
+        {
+            rt_free(Tx_Buff);
+        }
+
+    }
+
+    return state;
+}
+INIT_DEVICE_EXPORT(rt_hw_ra6m3_eth_init);

bsp/renesas/libraries/HAL_Drivers/drv_eth.h

+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-12-25     zylx         first version
+ */
+
+#ifndef __DRV_ETH_H__
+#define __DRV_ETH_H__
+
+#include <rtthread.h>
+#include <rthw.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* The PHY basic control register */
+#define PHY_BASIC_CONTROL_REG       0x00U
+#define PHY_RESET_MASK              (1<<15)
+#define PHY_AUTO_NEGOTIATION_MASK   (1<<12)
+
+/* The PHY basic status register */
+#define PHY_BASIC_STATUS_REG        0x01U
+#define PHY_LINKED_STATUS_MASK      (1<<2)
+#define PHY_AUTONEGO_COMPLETE_MASK  (1<<5)
+
+/* The PHY ID one register */
+#define PHY_ID1_REG                 0x02U
+/* The PHY ID two register */
+#define PHY_ID2_REG                 0x03U
+/* The PHY auto-negotiate advertise register */
+#define PHY_AUTONEG_ADVERTISE_REG   0x04U
+
+
+#ifdef PHY_USING_LAN8720A
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x1DU
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x1EU
+#define PHY_LINK_DOWN_MASK          (1<<4)
+#define PHY_AUTO_NEGO_COMPLETE_MASK (1<<6)
+
+/*  The PHY status register. */
+#define PHY_Status_REG              0x1FU
+#define PHY_10M_MASK                (1<<2)
+#define PHY_100M_MASK               (1<<3)
+#define PHY_FULL_DUPLEX_MASK        (1<<4)
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   ((sr) & PHY_100M_MASK)
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+
+#elif defined(PHY_USING_DM9161CEP)
+#define PHY_Status_REG              0x11U
+#define PHY_10M_MASK                ((1<<12) || (1<<13))
+#define PHY_100M_MASK               ((1<<14) || (1<<15))
+#define PHY_FULL_DUPLEX_MASK        ((1<<15) || (1<<13))
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   ((sr) & PHY_100M_MASK)
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x15U
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x15U
+#define PHY_LINK_CHANGE_FLAG        (1<<2)
+#define PHY_LINK_CHANGE_MASK        (1<<9)
+#define PHY_INT_MASK                0
+
+#elif defined(PHY_USING_DP83848C)
+#define PHY_Status_REG              0x10U
+#define PHY_10M_MASK                (1<<1)
+#define PHY_FULL_DUPLEX_MASK        (1<<2)
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   (!PHY_Status_SPEED_10M(sr))
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x12U
+#define PHY_LINK_CHANGE_FLAG        (1<<13)
+/*  The PHY interrupt control register. */
+#define PHY_INTERRUPT_CTRL_REG      0x11U
+#define PHY_INTERRUPT_EN            ((1<<0)|(1<<1))
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x12U
+#define PHY_INT_MASK                (1<<5)
+#endif
+
+#ifdef PHY_USING_LAN8742A
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x1DU
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x1EU
+#define PHY_LINK_DOWN_MASK          (1<<4)
+#define PHY_AUTO_NEGO_COMPLETE_MASK (1<<6)
+
+/*  The PHY status register. */
+#define PHY_Status_REG              0x1FU
+#define PHY_10M_MASK                (1<<2)
+#define PHY_100M_MASK               (1<<3)
+#define PHY_FULL_DUPLEX_MASK        (1<<4)
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   ((sr) & PHY_100M_MASK)
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+#endif /* PHY_USING_LAN8742A */
+
+#endif /* __DRV_ETH_H__ */

bsp/renesas/ra6m3-ek/board/Kconfig

@@ -122,6 +122,13 @@ menu "Hardware Drivers Config"
             select BSP_USING_SPI0
             default n
 
+        config BSP_USING_ETH
+            bool "Enable Ethernet"
+            select RT_USING_SAL
+            select RT_USING_LWIP
+            select RT_USING_NETDEV
+            default n
+
         menuconfig BSP_USING_LVGL
             bool "Enable LVGL for LCD"
             select PKG_USING_LVGL