The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.

Fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

Partially fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

Partially fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

This version of the IDCT is used by the VP6 decoder.
Signed-off-by: NPeter Ross <pross@xvid.org>

Signed-off-by: NPeter Ross <pross@xvid.org>

This is also used by the VP6 decoder.
Signed-off-by: NPeter Ross <pross@xvid.org>

Reviewed-by: NMark Thompson <sw@jkqxz.net>
Signed-off-by: NFuwei Tang <fuweix.tang@intel.com>
Signed-off-by: NZhong Li <zhong.li@intel.com>

QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.

It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose

Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: NMark Thompson <sw@jkqxz.net>
Signed-off-by: NZhong Li <zhong.li@intel.com>

New fade curve value 'nofade' passes audio samples as-is.
Primarily useful in carrying out acrossfade without fades.

Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: NDerek Buitenhuis <derek.buitenhuis@gmail.com>

Smarter improvements for this error message were suggested in the past
but this is certainly an improvement.

Swap width and height when do clock/cclock rotation
Add reversal/hflip/vflip options

ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128
-hwaccel_output_format vaapi -i input.264 -vf "transpose_vaapi=clock_flip"
-c:v h264_vaapi output.h264
Signed-off-by: NZachary Zhou <zachary.zhou@intel.com>
Signed-off-by: NMark Thompson <sw@jkqxz.net>

The reference picture sets are now constructed directly from the DPB
information.

No supported encode driver requires the pool to be fixed-size, so just
remove this constraint.

This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available.  At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.

It also adds flags to explicitly track the available features of the
different codecs.  The new structure also allows open-GOP support, so
that is now available for codecs which can do it.

Now memcpy can be avoided for NAL units containing escapes, too.

Particularly improves performance for files with hardcoded black bars.
For such a file, time spent in cbs_h2645_split_fragment went down from
369410 decicycles to 327677 decicycles. (It were 379114 decicycles when
every NAL unit was copied.)
Signed-off-by: NAndreas Rheinhardt <andreas.rheinhardt@googlemail.com>

This is in preparation for a patch for cbs_h2645. Now the packet's
rbsp_buffer can be owned by an AVBuffer.
Signed-off-by: NAndreas Rheinhardt <andreas.rheinhardt@googlemail.com>

Signed-off-by: NLou Logan <lou@lrcd.com>
Signed-off-by: NKieran O Leary <kieran.o.leary@gmail.com>

This allows the underlying files to change their duration on subsequent
avformat context opens.

An example use case where this matters:

ffconcat version 1.0
file dummy.mxf
file dummy.mxf

ffmpeg -re -stream_loop -1 -i dummy.ffconcat -f sdl2 none

The user can seamlessly change the input by atomically replacing dummy.mxf.

v2: Set ConcatFile duration in read_header for all segments with known
durations because from now on we always recalculate the start time in
open_file, and an instant seek could have caused unset ConcatFile durations.
Signed-off-by: NMarton Balint <cus@passwd.hu>

Signed-off-by: NMarton Balint <cus@passwd.hu>

Signed-off-by: NMarton Balint <cus@passwd.hu>

Fix ticket #7663
Reviewed-by: NCarl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: NHendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: NZhong Li <zhong.li@intel.com>

Optimize put_hevc_qpel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11.4%(2.01x to 2.24x, tested on loongson 3A3000).
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Optimize put_hevc_qpel_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11%(1.81x to 2.01x, tested on loongson 3A3000).
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

The compiled libavcodec/tests/codec_desc was left out of that dir's
.gitignore when the test was added, so it shows up in 'git status'
as an untracked file if it's been built.
Signed-off-by: NFeRD (Frank Dana) <ferdnyc@gmail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

For low latency streaming even milliseconds matter!

if 0 is encountered in the LUT then decompress() will continue to output 0 bytes but never read more data.
Without a specification it is impossible to say if this is invalid or a feature.
None of the valid prosumer files tested cause a 0 to be read, so it is likely
not a intended feature.

Fixes: Timeout
Fixes: 11266/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_PROSUMER_fuzzer-5681827423977472

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Fixes: Assertion failure
Fixes: 11898/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-5759794191794176

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: NMichael Niedermayer <michael@niedermayer.cc>

This is strongly based on code by Marton Balint, and depends on the previous commit

Fixes: Timeout
Fixes: 11502/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920
Before: Executed clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920 in 11209 ms
After:  Executed clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WCMV_fuzzer-5664893810769920 in  4104 ms

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegReviewed-by: NMarton Balint <cus@passwd.hu>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>