Skip to content

R
rt-thread

宁楠萍 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 dc4fde20 编写于 作者: L liang yongxiang
浏览文件
操作

[bsp] update uart driver and fixed typo

上级 b9c2acba
隐藏空白更改
内联 并排
Showing with 96 addition and 232 deletion
bsp/v2m-mps2/README.md
浏览文件 @ dc4fde20
......@@ -24,7 +24,7 @@ V2M-MPS2板级包支持MDK5（已测试MDK5.23~MDK5.25）
- [Windows 7: Enabling Telnet Client](https://social.technet.microsoft.com/wiki/contents/articles/910.windows-7-enabling-telnet-client.aspx)
- [Windows 10: Enabling Telnet Client](https://social.technet.microsoft.com/wiki/contents/articles/38433.windows-10-enabling-telnet-client.aspx)
打开project.uvprojx，编译，点击Debug->Start/Stop Seccion就可以进入仿真了。
打开project.uvprojx，编译，点击Debug->Start/Stop Session就可以进入仿真了。
### 3.2 如何选择其他内核
......@@ -54,7 +54,7 @@ finsh />
| 驱动 | 支持情况 | 备注 |
| ------ | ---- | :------: |
| UART | 支持 | UART0/1/2/3 |
| UART | 支持 | UART0/1/2 |
| GPIO | 未支持 | |
| LED | 未支持 | |
| BUTTOM | 未支持 | |
......
bsp/v2m-mps2/drivers/drv_uart.c
浏览文件 @ dc4fde20
......@@ -31,16 +31,14 @@
#ifndef RT_USING_DEVICE
#error "you must define RT_USING_DEVICE with uart device"
#endif
#ifndef RT_UART_RX_BUFFER_SIZE
#define RT_UART_RX_BUFFER_SIZE 16
#else
#include <rtdevice.h>
#endif
/* uart driver */
struct fvp_uart
struct v2m_uart
{
struct rt_device parent;
struct rt_serial_device serial;
CMSDK_UART_TypeDef * uart_base;
CMSDK_GPIO_TypeDef * rx_pingpio; // Pin GPIO
......@@ -49,62 +47,34 @@ struct fvp_uart
uint8_t tx_pinnum;
IRQn_Type uart_irq_rx;
IRQn_Type uart_irq_tx;
//IRQn_Type uart_irq_tx;
/* buffer for reception */
rt_uint8_t read_index, save_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
};
#ifdef RT_USING_UART0
struct fvp_uart uart0_device;
struct v2m_uart uart0_device;
#endif
#ifdef RT_USING_UART1
struct fvp_uart uart1_device;
struct v2m_uart uart1_device;
#endif
#ifdef RT_USING_UART2
struct fvp_uart uart2_device;
#endif
#ifdef RT_USING_UART3
struct fvp_uart uart3_device;
struct v2m_uart uart2_device;
#endif
static void uart_irq_handler(struct fvp_uart* uart)
static void uart_irq_handler(struct rt_serial_device *serial)
{
rt_ubase_t level;
uint32_t status;
uint8_t data;
struct v2m_uart *uart;
status = uart->uart_base->INTSTATUS;
data = uart->uart_base->DATA;
uart = (struct v2m_uart *)serial->parent.user_data;
/* enter interrupt */
rt_interrupt_enter();
level = rt_hw_interrupt_disable();
uart->rx_buffer[uart->save_index] = data;
uart->save_index ++;
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
{
uart->save_index = 0;
}
rt_hw_interrupt_enable(level);
/* invoke callback */
if (uart->parent.rx_indicate != RT_NULL)
{
rt_size_t length;
if (uart->read_index > uart->save_index)
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
else
length = uart->save_index - uart->read_index;
uart->parent.rx_indicate(&uart->parent, length);
}
status = uart->uart_base->INTSTATUS;
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
uart->uart_base->INTCLEAR = status;
/* leave interrupt */
......@@ -114,223 +84,144 @@ static void uart_irq_handler(struct fvp_uart* uart)
#ifdef RT_USING_UART0
void UART0RX_Handler(void)
{
uart_irq_handler(&uart0_device);
uart_irq_handler(&uart0_device.serial);
}
#endif
#ifdef RT_USING_UART1
void UART1RX_Handler(void)
{
uart_irq_handler(&uart1_device);
uart_irq_handler(&uart1_device.serial);
}
#endif
#ifdef RT_USING_UART2
void UART2RX_Handler(void)
{
uart_irq_handler(&uart2_device);
uart_irq_handler(&uart2_device.serial);
}
#endif
#ifdef RT_USING_UART3
void UART3RX_Handler(void)
static rt_err_t v2m_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
uart_irq_handler(&uart3_device);
}
#endif
struct v2m_uart *uart;
static rt_err_t rt_uart_init (rt_device_t dev)
{
struct fvp_uart* uart;
RT_ASSERT(dev != RT_NULL);
uart = (struct fvp_uart *)dev;
RT_ASSERT(serial != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
uart->rx_pingpio->ALTFUNCSET |= (1u << uart->rx_pinnum);
uart->tx_pingpio->ALTFUNCSET |= (1u << uart->tx_pinnum);
uart = (struct v2m_uart *)serial->parent.user_data;
uart->uart_base->BAUDDIV = SystemCoreClock / cfg->baud_rate;
uart->uart_base->CTRL = CMSDK_UART_CTRL_TXEN_Msk | CMSDK_UART_CTRL_RXEN_Msk | CMSDK_UART_CTRL_RXIRQEN_Msk;
uart->uart_base->BAUDDIV = SystemCoreClock / 115200;
uart->rx_pingpio->ALTFUNCSET |= (1u << uart->rx_pinnum);
uart->tx_pingpio->ALTFUNCSET |= (1u << uart->tx_pinnum);
return RT_EOK;
}
static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
static rt_err_t v2m_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct fvp_uart* uart;
RT_ASSERT(dev != RT_NULL);
uart = (struct fvp_uart *)dev;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Enable the UART Interrupt */
NVIC_EnableIRQ(uart->uart_irq_rx);
}
return RT_EOK;
struct v2m_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct v2m_uart *)serial->parent.user_data;
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* disable rx irq */
NVIC_DisableIRQ(uart->uart_irq_rx);
break;
case RT_DEVICE_CTRL_SET_INT:
/* enable rx irq */
NVIC_EnableIRQ(uart->uart_irq_rx);
break;
}
return RT_EOK;
}
static rt_err_t rt_uart_close(rt_device_t dev)
static int v2m_putc(struct rt_serial_device *serial, char c)
{
struct fvp_uart* uart;
RT_ASSERT(dev != RT_NULL);
uart = (struct fvp_uart *)dev;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Disable the UART Interrupt */
NVIC_DisableIRQ(uart->uart_irq_rx);
}
return RT_EOK;
struct v2m_uart *uart;
RT_ASSERT(serial != RT_NULL);
uart = (struct v2m_uart *)serial->parent.user_data;
while (uart->uart_base->STATE & CMSDK_UART_STATE_TXBF_Msk);
uart->uart_base->DATA = c;
return 1;
}
static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
static int v2m_getc(struct rt_serial_device *serial)
{
struct fvp_uart* uart = (struct fvp_uart *)dev;
rt_uint8_t *ptr;
rt_size_t length;
RT_ASSERT(dev != RT_NULL);
RT_ASSERT(buffer != RT_NULL);
int ch;
struct v2m_uart *uart;
ptr = (rt_uint8_t *) buffer;
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->read_index != uart->save_index)
{
*ptr = uart->rx_buffer[uart->read_index];
uart->read_index ++;
if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
uart->read_index = 0;
}
else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr ++;
size --;
}
RT_ASSERT(serial != RT_NULL);
uart = (struct v2m_uart *)serial->parent.user_data;
length = (rt_uint32_t)ptr - (rt_uint32_t)buffer;
return length;
ch = -1;
if (uart->uart_base->STATE & CMSDK_UART_STATE_RXBF_Msk)
ch = uart->uart_base->DATA & 0xff;
return ch;
}
static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
static const struct rt_uart_ops v2m_uart_ops =
{
char *ptr = (char*) buffer;
struct fvp_uart* uart = (struct fvp_uart *)dev;
RT_ASSERT(dev != RT_NULL);
RT_ASSERT(buffer != RT_NULL);
if (dev->open_flag & RT_DEVICE_FLAG_STREAM)
{
/* stream mode */
while (size)
{
if (*ptr == '\n')
{
while (uart->uart_base->STATE & CMSDK_UART_STATE_TXBF_Msk);
uart->uart_base->DATA = '\r';
}
while (uart->uart_base->STATE & CMSDK_UART_STATE_TXBF_Msk);
uart->uart_base->DATA = *ptr;
ptr++;
size--;
}
}
else
{
while (size)
{
while (uart->uart_base->STATE & CMSDK_UART_STATE_TXBF_Msk);
uart->uart_base->DATA = *ptr;
ptr++;
size--;
}
}
return (rt_size_t)ptr - (rt_size_t)buffer;
}
v2m_configure,
v2m_control,
v2m_putc,
v2m_getc,
};
int rt_hw_usart_init(void)
{
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef RT_USING_UART0
{
struct fvp_uart* uart;
struct v2m_uart* uart;
/* get uart device */
uart = &uart0_device;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
uart->uart_base = CMSDK_UART0;
uart->uart_irq_rx = UART0RX_IRQn;
uart->read_index = 0;
uart->save_index = 0;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
/* device interface */
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
rt_device_register(&uart->parent, "uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
uart->serial.ops = &v2m_uart_ops;
uart->serial.config = config;
rt_hw_serial_register(&uart->serial,
"uart0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif /* RT_USING_UART1 */
#endif /* RT_USING_UART0 */
#ifdef RT_USING_UART1
{
struct fvp_uart* uart;
struct v2m_uart* uart;
/* get uart device */
uart = &uart1_device;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
uart->uart_base = CMSDK_UART1;
uart->uart_irq_rx = UART1RX_IRQn;
uart->read_index = 0;
uart->save_index = 0;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
/* device interface */
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
rt_device_register(&uart->parent, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
rt_hw_serial_register(&uart->serial,
"uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif /* RT_USING_UART1 */
#ifdef RT_USING_UART2
{
struct fvp_uart* uart;
struct v2m_uart* uart;
/* get uart device */
uart = &uart2_device;
......@@ -338,21 +229,11 @@ int rt_hw_usart_init(void)
/* device initialization */
uart->uart_base = CMSDK_UART2;
uart->uart_irq_rx = UART2RX_IRQn;
uart->read_index = 0;
uart->save_index = 0;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
/* device interface */
uart->parent.type = RT_Device_Class_Char;
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
rt_device_register(&uart->parent, "uart2", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
rt_hw_serial_register(&uart->serial,
"uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif /* RT_USING_UART2 */
return 0;
......
bsp/v2m-mps2/project.uvoptx
浏览文件 @ dc4fde20
......@@ -148,24 +148,7 @@
<Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000)</Name>
</SetRegEntry>
</TargetDriverDllRegistry>
<Breakpoint>
<Bp>
<Number>0</Number>
<Type>0</Type>
<LineNumber>150</LineNumber>
<EnabledFlag>1</EnabledFlag>
<Address>2206</Address>
<ByteObject>0</ByteObject>
<HtxType>0</HtxType>
<ManyObjects>0</ManyObjects>
<SizeOfObject>0</SizeOfObject>
<BreakByAccess>0</BreakByAccess>
<BreakIfRCount>1</BreakIfRCount>
<Filename>..\..\src\components.c</Filename>
<ExecCommand></ExecCommand>
<Expression>\\rtthread_v2m_mps2\../../src/components.c\150</Expression>
</Bp>
</Breakpoint>
<Breakpoint/>
<Tracepoint>
<THDelay>0</THDelay>
</Tracepoint>
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或