fsl_flexram.h

/*
 * Copyright 2017 NXP
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of the copyright holder nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _FSL_FLEXRAM_H_
#define _FSL_FLEXRAM_H_

#include "fsl_common.h"

/*!
 * @addtogroup flexram
 * @{
 */

/******************************************************************************
 * Definitions.
 *****************************************************************************/

/*! @name Driver version */
/*@{*/
/*! @brief Driver version 2.0.1. */
#define FSL_FLEXRAM_DRIVER_VERSION (MAKE_VERSION(2U, 0U, 1U))
/*@}*/

/*! @brief flexram write read sel */
enum _flexram_wr_rd_sel
{
    kFLEXRAM_Read = 0U,  /*!< read */
    kFLEXRAM_Write = 1U, /*!< write */
};

/*! @brief Interrupt status flag mask */
enum _flexram_interrupt_status
{
    kFLEXRAM_OCRAMAccessError = FLEXRAM_INT_STATUS_OCRAM_ERR_STATUS_MASK,    /*!< ocram access unallocated address */
    kFLEXRAM_DTCMAccessError = FLEXRAM_INT_STATUS_DTCM_ERR_STATUS_MASK,      /*!< dtcm access unallocated address */
    kFLEXRAM_ITCMAccessError = FLEXRAM_INT_STATUS_ITCM_ERR_STATUS_MASK,      /*!< itcm access unallocated address */
    kFLEXRAM_OCRAMMagicAddrMatch = FLEXRAM_INT_STATUS_OCRAM_MAM_STATUS_MASK, /*!< ocram maigc address match */
    kFLEXRAM_DTCMMagicAddrMatch = FLEXRAM_INT_STATUS_DTCM_MAM_STATUS_MASK,   /*!< dtcm maigc address match */
    kFLEXRAM_ITCMMagicAddrMatch = FLEXRAM_INT_STATUS_ITCM_MAM_STATUS_MASK,   /*!< itcm maigc address match */

    kFLEXRAM_InterruptStatusAll = 0x3FU, /*!< all the interrupt status mask */
};

/*! @brief FLEXRAM TCM access mode
* Fast access mode expected to be finished in 1-cycle
* Wait access mode expected to be finished in 2-cycle
* Wait access mode is a feature of the flexram and it should be used when
* the cpu clock too fast to finish tcm access in 1-cycle.
* Normally, fast mode is the default mode, the efficiency of the tcm access will better.
*/
typedef enum _flexram_tcm_access_mode
{
    kFLEXRAM_TCMAccessFastMode = 0U, /*!< fast access mode */
    kFLEXRAM_TCMAccessWaitMode = 1U, /*!< wait access mode */
} flexram_tcm_access_mode_t;

/*! @brief FLEXRAM bank type */
enum _flexram_bank_type
{
    kFLEXRAM_BankNotUsed = 0U, /*!< bank is not used */
    kFLEXRAM_BankOCRAM = 1U,   /*!< bank is OCRAM */
    kFLEXRAM_BankDTCM = 2U,    /*!< bank is DTCM */
    kFLEXRAM_BankITCM = 3U,    /*!< bank is ITCM */
};

/*! @brief FLEXRAM tcm support size */
enum _flexram_tcm_size
{
    kFLEXRAM_TCMSize32KB = 32 * 1024U,   /*!< TCM total size 32KB */
    kFLEXRAM_TCMSize64KB = 64 * 1024U,   /*!< TCM total size 64KB */
    kFLEXRAM_TCMSize128KB = 128 * 1024U, /*!< TCM total size 128KB */
    kFLEXRAM_TCMSize256KB = 256 * 1024U, /*!< TCM total size 256KB */
    kFLEXRAM_TCMSize512KB = 512 * 1024U, /*!< TCM total size 512KB */
};

/*! @brief FLEXRAM bank allocate source */
typedef enum _flexram_bank_allocate_src
{
    kFLEXRAM_BankAllocateThroughHardwareFuse = 0U, /*!< allocate ram through hardware fuse value */
    kFLEXRAM_BankAllocateThroughBankCfg = 1U,      /*!< allocate ram through FLEXRAM_BANK_CFG */
} flexram_bank_allocate_src_t;

/*! @brief FLEXRAM allocate ocram, itcm, dtcm size */
typedef struct _flexram_allocate_ram
{
    const uint8_t ocramBankNum; /*!< ocram banknumber which the SOC support */
    const uint8_t dtcmBankNum;  /*!< dtcm bank number to allocate, the number should be power of 2 */
    const uint8_t itcmBankNum;  /*!< itcm bank number to allocate, the number should be power of 2 */
} flexram_allocate_ram_t;
/*!
 * @name Initialization and deinitialization
 * @{
 */

/*!
 * @brief FLEXRAM module initialization function.
 *
 * @param base FLEXRAM base address.
 */
void FLEXRAM_Init(FLEXRAM_Type *base);

/*!
 * @brief Deinitializes the FLEXRAM.
 *
 */
void FLEXRAN_Deinit(FLEXRAM_Type *base);

/* @} */

/*!
 * @name Status
 * @{
 */
/*!
 * @brief FLEXRAM module get interrupt status.
 *
 * @param base FLEXRAM base address.
 */
static inline uint32_t FLEXRAM_GetInterruptStatus(FLEXRAM_Type *base)
{
    return base->INT_STATUS & kFLEXRAM_InterruptStatusAll;
}

/*!
 * @brief FLEXRAM module clear interrupt status.
 *
 * @param base FLEXRAM base address.
 * @param status status to clear.
 */
static inline void FLEXRAM_ClearInterruptStatus(FLEXRAM_Type *base, uint32_t status)
{
    base->INT_STATUS |= status;
}

/*!
 * @brief FLEXRAM module enable interrupt status.
 *
 * @param base FLEXRAM base address.
 * @param status status to enable.
 */
static inline void FLEXRAM_EnableInterruptStatus(FLEXRAM_Type *base, uint32_t status)
{
    base->INT_STAT_EN |= status;
}

/*!
 * @brief FLEXRAM module disable interrupt status.
 *
 * @param base FLEXRAM base address.
 * @param status status to disable.
 */
static inline void FLEXRAM_DisableInterruptStatus(FLEXRAM_Type *base, uint32_t status)
{
    base->INT_STAT_EN &= ~status;
}

/* @} */

/*!
 * @name Interrupts
 * @{
 */

/*!
 * @brief FLEXRAM module enable interrupt.
 *
 * @param base FLEXRAM base address.
 * @param status status interrupt to enable.
 */
static inline void FLEXRAM_EnableInterruptSignal(FLEXRAM_Type *base, uint32_t status)
{
    base->INT_SIG_EN |= status;
}

/*!
 * @brief FLEXRAM module disable interrupt.
 *
 * @param base FLEXRAM base address.
 * @param status status interrupt to disable.
 */
static inline void FLEXRAM_DisableInterruptSignal(FLEXRAM_Type *base, uint32_t status)
{
    base->INT_SIG_EN &= ~status;
}
/* @} */

/*!
 * @name functional
 * @{
 */

/*!
 * @brief FLEXRAM module set TCM read access mode
 *
 * @param base  FLEXRAM base address.
 * @param mode  access mode.
 */
static inline void FLEXRAM_SetTCMReadAccessMode(FLEXRAM_Type *base, flexram_tcm_access_mode_t mode)
{
    base->TCM_CTRL &= ~FLEXRAM_TCM_CTRL_TCM_RWAIT_EN_MASK;
    base->TCM_CTRL |= mode;
}

/*!
 * @brief FLEXRAM module set TCM write access mode
 *
 * @param base  FLEXRAM base address.
 * @param mode  access mode.
 */
static inline void FLEXRAM_SetTCMWriteAccessMode(FLEXRAM_Type *base, flexram_tcm_access_mode_t mode)
{
    base->TCM_CTRL &= ~FLEXRAM_TCM_CTRL_TCM_WWAIT_EN_MASK;
    base->TCM_CTRL |= mode;
}

/*!
 * @brief FLEXRAM module force ram clock on
 *
 * @param base  FLEXRAM base address.
 * @param enable enable or disable clock force on.
 */
static inline void FLEXRAM_EnableForceRamClockOn(FLEXRAM_Type *base, bool enable)
{
    if (enable)
    {
        base->TCM_CTRL |= FLEXRAM_TCM_CTRL_FORCE_CLK_ON_MASK;
    }
    else
    {
        base->TCM_CTRL &= ~FLEXRAM_TCM_CTRL_FORCE_CLK_ON_MASK;
    }
}

/*!
 * @brief FLEXRAM OCRAM magic addr configuration
 * When read/write access hit magic address, it will generate interrupt
 * @param magicAddr magic address.
 * @param rwsel read write select, 0 read access , 1 write access
 */
static inline void FLEXRAM_SetOCRAMMagicAddr(FLEXRAM_Type *base, uint16_t magicAddr, uint32_t rwSel)
{
    base->OCRAM_MAGIC_ADDR =
        FLEXRAM_OCRAM_MAGIC_ADDR_OCRAM_WR_RD_SEL(rwSel) | FLEXRAM_OCRAM_MAGIC_ADDR_OCRAM_MAGIC_ADDR(magicAddr >> 3U);
}

/*!
 * @brief FLEXRAM DTCM magic addr configuration
 * When read/write access hit magic address, it will generate interrupt
 * @param magicAddr magic address.
 * @param rwsel read write select, 0 read access , 1 write access
 */
static inline void FLEXRAM_SetDTCMMagicAddr(FLEXRAM_Type *base, uint16_t magicAddr, uint32_t rwSel)
{
    base->DTCM_MAGIC_ADDR =
        FLEXRAM_DTCM_MAGIC_ADDR_DTCM_WR_RD_SEL(rwSel) | FLEXRAM_DTCM_MAGIC_ADDR_DTCM_MAGIC_ADDR(magicAddr >> 3U);
}

/*!
 * @brief FLEXRAM ITCM magic addr configuration
 * When read/write access hit magic address, it will generate interrupt
 * @param magicAddr magic address.
 * @param rwsel read write select, 0 read access , 1 write access
 */
static inline void FLEXRAM_SetITCMMagicAddr(FLEXRAM_Type *base, uint16_t magicAddr, uint32_t rwSel)
{
    base->ITCM_MAGIC_ADDR =
        FLEXRAM_ITCM_MAGIC_ADDR_ITCM_WR_RD_SEL(rwSel) | FLEXRAM_ITCM_MAGIC_ADDR_ITCM_MAGIC_ADDR(magicAddr >> 3U);
}

/*!
 * @brief FLEXRAM allocate on-chip ram for OCRAM,ITCM,DTCM
 * This function is independent of FLEXRAM_Init, it can be called directly if ram re-allocate
 * is needed.
 * @param config allocate configuration.
 * @retval kStatus_InvalidArgument the argument is invalid
 * 		   kStatus_Success allocate success
 */
status_t FLEXRAM_AllocateRam(flexram_allocate_ram_t *config);

/*!
 * @brief FLEXRAM set allocate on-chip ram source
 * @param src bank config source select value.
 */
static inline void FLEXRAM_SetAllocateRamSrc(flexram_bank_allocate_src_t src)
{
    IOMUXC_GPR->GPR16 &= ~IOMUXC_GPR_GPR16_FLEXRAM_BANK_CFG_SEL_MASK;
    IOMUXC_GPR->GPR16 |= IOMUXC_GPR_GPR16_FLEXRAM_BANK_CFG_SEL(src);
}

/*! @}*/

#endif