commit 57a0da28ced8707cb9f79f071a016b9d005caf5a upstream.

Unaligned AIO must be serialized because the zeroing of partial blocks
of unaligned AIO can result in data corruption in case it's overlapping
another in flight IO.

Currently we wait for all unwritten extents before we submit unaligned
AIO which protects data in case of unaligned AIO is following overlapping
IO. However if a unaligned AIO is followed by overlapping aligned AIO we
can still end up corrupting data.

To fix this, we must make sure that the unaligned AIO is the only IO in
flight by waiting for unwritten extents conversion not just before the
IO submission, but right after it as well.

This problem can be reproduced by xfstest generic/538
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit ddefc033eecf23f1e8b81d0663c5db965adf5516 upstream

The commit referenced below introduced device locking around save and
restore of state for each device during a PCI bus "try" reset, making
it decidely non-"try" and prone to deadlock in the event that a device
is already locked.  Restore __pci_reset_bus() and __pci_reset_slot()
to their advertised locking semantics by pushing the save and restore
functions into the branch where the entire tree is already locked.
Extend the helper function names with "_locked" and update the comment
to reflect this calling requirement.

Fixes: b014e96d ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NZhiyuan Hou <zhiyuan2048@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

lkp-build bot reported the following link error with ipv6 disabled:

ld: net/hookers/hookers.o:(.data+0x40): undefined reference to `ipv6_specific'
ld: net/hookers/hookers.o:(.data+0x78): undefined reference to `ipv6_mapped'
ld: net/hookers/hookers.o:(.data+0xe8): undefined reference to `inet6_stream_ops'

Fixed this issue by adding IS_ENABLED(CONFIG_IPV6) check.
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 0769663b4f580566ef6cdf366f3073dbe8022c39 upstream.

According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.

Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 45ac486ecf2dc998e25cf32f0cabf2deaad875be upstream.

Currently nfs42_proc_copy_file_range() can not return EAGAIN.

Fixes: e4648aa4 ("NFS recover from destination server reboot for copies")
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

Fixes: 60448d43 ("writeback: add memcg_blkcg_link tree")
Signed-off-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

net/hookers/hookers.c:194:44-45: WARNING: Use ARRAY_SIZE

 Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element

Semantic patch information:
 This makes an effort to find cases where ARRAY_SIZE can be used such as
 where there is a division of sizeof the array by the sizeof its first
 element or by any indexed element or the element type. It replaces the
 division of the two sizeofs by ARRAY_SIZE.

Generated by: scripts/coccinelle/misc/array_size.cocci

[ caspar: remove redundant parentheses ]

Fixes: 3c74cfbb ("net: kernel hookers service for toa module")
CC: George Zhang <georgezhang@linux.alibaba.com>
Signed-off-by: Nkbuild test robot <lkp@intel.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

read/write_cr0() are used in net/hookers.c, but they are only available
on x86 platform. Adding a depend-on fields in Kconfig to disable this
feature in other platforms.
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 592acbf16821288ecdc4192c47e3774a4c48bb64 upstream.

This commit zeroes out the unused memory region in the buffer_head
corresponding to the extent metablock after writing the extent header
and the corresponding extent node entries.

This is done to prevent random uninitialized data from getting into
the filesystem when the extent block is synced.

This fixes CVE-2019-11833.
Signed-off-by: NSriram Rajagopalan <sriramr@arista.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Wrap cgroup writeback v1 logic to prevent build errors without
CONFIG_CGROUPS or CONFIG_CGROUP_WRITEBACK.
Reported-by: Nkbuild test robot <lkp@intel.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

Since now variable 'flags' is not used anymore, remove it as well.
Otherwise there is a compile warning "unused variable 'flags'".

Fixes: e1843f01 ("NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter")
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

When a waiter is waked by CB_NOTIFY_LOCK, it will retry
nfs4_proc_setlk(). The waiter may fail to nfs4_proc_setlk() and sleep
again. However, the waiter is already removed from clp->cl_lock_waitq
when handling CB_NOTIFY_LOCK in nfs4_wake_lock_waiter(). So any
subsequent CB_NOTIFY_LOCK won't wake this waiter anymore. We should
put the waiter back to clp->cl_lock_waitq before retrying.

Cc: stable@vger.kernel.org #4.9+
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Commit b7dbcc0e "NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter"
found this bug. However it didn't fix it.

This commit replaces schedule_timeout() with wait_woken() and
default_wake_function() with woken_wake_function() in function
nfs4_retry_setlk() and nfs4_wake_lock_waiter(). wait_woken() uses
memory barriers in its implementation to avoid potential race condition
when putting a process into sleeping state and then waking it up.

Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks")
Cc: stable@vger.kernel.org #4.9+
Signed-off-by: NYihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

So far writeback control is supported for cgroup v1 interface. However
it also has some restrictions, so introduce a new kernel boot parameter
to control the behavior which is disabled by default. Users can enable
the writeback control for cgroup v1 with the command line "cgwb_v1".
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

There might have tons of files queued in the writeback, awaiting for
writing back. Unfortunately, the writeback's cgroup has been dead. In
this case, we reassociate the inode with another writeback, but we
possibly can't because the writeback associated with the dead cgroup is
the only valid one. In this case, the new writeback is allocated,
initialized and associated with the inode in the non-stopping fashion
until all data resident in the inode's page cache are flushed to disk.
It causes unnecessary high system load.

This fixes the issue by enforce moving the inode to root cgroup when the
previous binding cgroup becomes dead. With it, no more unnecessary
writebacks are created, populated and the system load decreased by about
6x in the test case we carried out:
    Without the patch: 30% system load
    With the patch:    5%  system load
Signed-off-by: Nluanshi <zhangliguang@linux.alibaba.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb
switch may not go to the workqueue after synchronize_rcu(). Thus
previous scheduled switches was not finished even flushing the
workqueue, which will cause a NULL pointer dereferenced followed below.

VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds.  Have a nice day...
BUG: unable to handle kernel NULL pointer dereference at 0000000000000278
[<ffffffff8126a303>] evict+0xb3/0x180
[<ffffffff8126a760>] iput+0x1b0/0x230
[<ffffffff8127c690>] inode_switch_wbs_work_fn+0x3c0/0x6a0
[<ffffffff810a5b2e>] worker_thread+0x4e/0x490
[<ffffffff810a5ae0>] ? process_one_work+0x410/0x410
[<ffffffff810ac056>] kthread+0xe6/0x100
[<ffffffff8173c199>] ret_from_fork+0x39/0x50

Replace the synchronize_rcu() call with a rcu_barrier() to wait for all
pending callbacks to finish. And inc isw_nr_in_flight after call_rcu()
in inode_switch_wbs() to make more sense.
Suggested-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Acked-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

We have gotten a WARNNING when releasing blkcg_css:

[332489.681635] WARNING: CPU: 55 PID: 14859 at lib/list_debug.c:56 __list_del_entry+0x81/0xc0
[332489.682191] list_del corruption, ffff883e6b94d450->prev is LIST_POISON2 (dead000000000200)
......
[332489.683895] CPU: 55 PID: 14859 Comm: kworker/55:2 Tainted: G
[332489.684477] Hardware name: Inspur SA5248M4/X10DRT-PS, BIOS 4.05A
10/11/2016
[332489.685061] Workqueue: cgroup_destroy css_release_work_fn
[332489.685654]  ffffc9001d92bd28 ffffffff81380042 ffffc9001d92bd78
0000000000000000
[332489.686269]  ffffc9001d92bd68 ffffffff81088f8b 0000003800000000
ffff883e6b94d4a0
[332489.686867]  ffff883e6b94d400 ffffffff81ce8fe0 ffff88375b24f400
ffff883e6b94d4a0
[332489.687479] Call Trace:
[332489.688078]  [<ffffffff81380042>] dump_stack+0x63/0x81
[332489.688681]  [<ffffffff81088f8b>] __warn+0xcb/0xf0
[332489.689276]  [<ffffffff8108900f>] warn_slowpath_fmt+0x5f/0x80
[332489.689877]  [<ffffffff8139e7c1>] __list_del_entry+0x81/0xc0
[332489.690481]  [<ffffffff81125552>] css_release_work_fn+0x42/0x140
[332489.691090]  [<ffffffff810a2db9>] process_one_work+0x189/0x420
[332489.691693]  [<ffffffff810a309e>] worker_thread+0x4e/0x4b0
[332489.692293]  [<ffffffff810a3050>] ? process_one_work+0x420/0x420
[332489.692905]  [<ffffffff810a9616>] kthread+0xe6/0x100
[332489.693504]  [<ffffffff810a9530>] ? kthread_park+0x60/0x60
[332489.694099]  [<ffffffff817184e1>] ret_from_fork+0x41/0x50
[332489.694722] ---[ end trace 0cf869c4a5cfba87 ]---
......

This is caused by calling css_get after the css is killed by another
thread described below:

           Thread 1                       Thread 2
cgroup_rmdir
  -> kill_css
    -> percpu_ref_kill_and_confirm
      -> css_killed_ref_fn

css_killed_work_fn
  -> css_put
    -> css_release
                                        wb_get_create
					  -> find_blkcg_css
					    -> css_get
					  -> css_put
					    -> css_release (double free)
    -> css_release_workfn
      -> css_free_work_fn
       -> blkcg_css_free

When doublefree happened, it may free the memory still used by
other threads and cause a kernel panic.

Fix this by using css_tryget_online in find_blkcg_css while will return
false if the css is killed.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Here we add a global radix tree to link memcg and blkcg that the user
attach the tasks to when using cgroup v1, which is used for writeback
cgroup.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

We found that it return success when we set IMMUTABLE_FL flag to a file in
docker even though the docker didn't have the capability
CAP_LINUX_IMMUTABLE.

The commit d1d04ef8 ("ovl: stack file ops") and dab5ca8f ("ovl: add
lsattr/chattr support") implemented chattr operations on a regular overlay
file. ovl_real_ioctl() overridden the current process's subjective
credentials with ofs->creator_cred which have the capability
CAP_LINUX_IMMUTABLE so that it will return success in
vfs_ioctl()->cap_capable().

Fix this by checking the capability before cred overridden. And here we
only care about APPEND_FL and IMMUTABLE_FL, so get these information from
inode.

[SzM: move check and call to underlying fs inside inode locked region to
prevent two such calls from racing with each other]
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream.

Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.

WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...

Call Trace:
 alloc_pages_current+0xb1/0x1e0
 kmalloc_order+0x1f/0x60
 kmalloc_order_trace+0x1d/0x120
 fb_alloc_cmap_gfp+0x85/0x2b0
 fb_set_user_cmap+0xff/0x370
 do_fb_ioctl+0x949/0xa20
 fb_ioctl+0xdd/0x120
 do_vfs_ioctl+0x186/0x1070
 ksys_ioctl+0x89/0xa0
 __x64_sys_ioctl+0x74/0xb0
 do_syscall_64+0xc8/0x550
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit cf84807f6dd0be5214378e66460cfc9187f532f9 upstream

To fix following divide-by-zero error found by Syzkaller:

  divide error: 0000 [#1] SMP PTI
  CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:fb_var_to_videomode+0xae/0xc0
  Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
  RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246
  RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10
  RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100
  R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000
  FS:  00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0
  Call Trace:
   fb_set_var+0x257/0x390
   ? lookup_fast+0xbb/0x2b0
   ? fb_open+0xc0/0x140
   ? chrdev_open+0xa6/0x1a0
   do_fb_ioctl+0x445/0x5a0
   do_vfs_ioctl+0x92/0x5f0
   ? __alloc_fd+0x3d/0x160
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x5b/0x190
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f20548258d7
  Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48

It can be triggered easily with following test code:

  #include <linux/fb.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  int main(void)
  {
          struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
          int fd = open("/dev/fb0", O_RDWR);
          if (fd < 0)
                  return 1;

          if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
                  return 1;

          return 0;
  }
Signed-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

LVS fullnat will replace network traffic's source ip with its local ip,
and thus the backend servers cannot obtain the real client ip.

To solve this, LVS has introduced the tcp option address (TOA) to store
the essential ip address information in the last tcp ack packet of the
3-way handshake, and the backend servers need to retrieve it from the
packet header.

In this patch, we have introduced the sk_toa_data member in the sock
structure to hold the TOA information. There used to be an in-tree
module for TOA managing, whereas it has now been maintained as an
standalone module.

In this case, the toa module should register its hook function(s) using
the provided interfaces in the hookers module.

TOA in sock structure:

	__be32 sk_toa_data[16];

The hookers module only provides the sk_toa_data placeholder, and the
toa module can use this variable through the layout it needs.

Hook interfaces:

The hookers module replaces the kernel's syn_recv_sock and getname
handler with a stub that chains the toa module's hook function(s) to the
original handling function. The hookers module allows hook functions to
be installed and uninstalled in any order.

toa module:

The external toa module will be provided in separate RPM package.

[xuyu@linux.alibaba.com: amend commit log]
Signed-off-by: NGeorge Zhang <georgezhang@linux.alibaba.com>
Signed-off-by: NXu Yu <xuyu@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 1f23816b8eb8fdc39990abe166c10a18c16f6b21 upstream.

In commit 88c85538, "virtio-blk: add discard and write zeroes features
to specification" (https://github.com/oasis-tcs/virtio-spec), the virtio
block specification has been extended to add VIRTIO_BLK_T_DISCARD and
VIRTIO_BLK_T_WRITE_ZEROES commands.  This patch enables support for
discard and write zeroes in the virtio-blk driver when the device
advertises the corresponding features, VIRTIO_BLK_F_DISCARD and
VIRTIO_BLK_F_WRITE_ZEROES.
Signed-off-by: NChangpeng Liu <changpeng.liu@intel.com>
Signed-off-by: NDaniel Verkamp <dverkamp@chromium.org>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Unstable tsc will trigger clocksource watchdog and disable itself, as a
result other clocksource will be elected as the current clocksource
which will result in performace issue on our servers.

RHEL7 also disabled this feature for some issues, see changelog:
[x86] disable clocksource watchdog (Prarit Bhargava) [914709]
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

This reverts commit 76d3b851.

The returned value for check_tsc_warp() is useless now, remove it.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

This reverts commit cc4db268.

When we do hot-add and enable vCPU, the time inside the VM jumps and
then VM stucks.
The dmesg shows like this:
[   48.402948] CPU2 has been hot-added
[   48.413774] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   48.415155] kvm-clock: cpu 2, msr 6b615081, secondary cpu clock
[   48.453690] TSC ADJUST compensate: CPU2 observed 139318776350 warp.  Adjust: 139318776350
[  102.060874] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
[  102.060874] clocksource:                       'kvm-clock' wd_now: 1cb1cfc4bf8 wd_last: 1be9588f1fe mask: ffffffffffffffff
[  102.060874] clocksource:                       'tsc' cs_now: 207d794f7e cs_last: 205a32697a mask: ffffffffffffffff
[  102.060874] tsc: Marking TSC unstable due to clocksource watchdog
[  102.070188] KVM setup async PF for cpu 2
[  102.071461] kvm-stealtime: cpu 2, msr 13ba95000
[  102.074530] Will online and init hotplugged CPU: 2

This is because the TSC for the newly added VCPU is initialized to 0
while others are ahead. Guest will do the TSC ADJUST compensate and
cause the time jumps.

Commit bd8fab39("KVM: x86: fix maintaining of kvm_clock stability
on guest CPU hotplug") can fix this problem.  However, the host kernel
version may be older, so do not ajust TSC if sync test fails, just mark
it unstable.
Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

ECI may have an use case that configuring each device mapper disk
throttling policy just under root blkio cgroup, but actually using them
in different containers.
Since hierarchical throttling is now only supported on cgroup v2 and ECI
uses cgroup v1, so we have to enable hierarchical throttling on cgroup
v1.
This is ported from redhat 7u, and a year ago Jiufei already ported it
to alikernel 4.9 as well. So I think this change should be acceptable.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

Prior to xdragon platform 20181230 release (e.g. 0930 release),
vring_use_dma_api() is required to return 'true' unconditionally.

Introduce a new kernel boot parameter called "vring_force_dma_api" to
control the behavior, boot xdragon host with "vring_force_dma_api"
command line to make ENI hotplug work, so that normal ECS hosts keep the
original behavior.
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NEryu Guan <eguan@linux.alibaba.com>

Cherry-pick from clear-linux patches:
https://github.com/clearlinux-pkgs/linux-kvm/0104-give-rdrand-some-credit.patch

try to credit rdrand/rdseed with some entropy

In VMs but even modern hardware, we're super starved for entropy, and while we can
and do wear a tin foil hat, it's very hard to argue that
rdrand and rdtsc add zero entropy.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

Cherry-pick from kata-container patches:
https://github.com/kata-containers/packaging/tree/master/kernel/patches/0001-NO-UPSTREAM-9P-always-use-cached-inode-to-fill-in-v9.patch

So that if in cache=none mode, we don't have to lookup server that
might not support open-unlink-fstat operation.

fixes https://github.com/01org/cc-oci-runtime/issues/47
fixes https://github.com/01org/cc-oci-runtime/issues/1062Signed-off-by: NJulio Montes <julio.montes@intel.com>
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: NEryu Guan <eguan@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Cherry-pick from kata-container patches:
https://github.com/kata-containers/packaging/tree/master/kernel/patches/0002-Compile-in-evged-always.patch

We need evged for NEMU (and in general for hw reduced)

The config option cannot be set normally since it breaks all
regular systems, and hardware reduced is really a runtime choice.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NEryu Guan <eguan@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit f456767d3391e9f7d9d25a2e7241d75676dc19da upstream.

Add new code to count canceled pending cluster reservations on bigalloc
file systems and to reduce the cluster reservation count on all file
systems using delayed allocation.  This replaces old code in
ext4_da_page_release_reservations that was incorrect.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 9fe671496b6c286f9033aedfc1718d67721da0ae upstream.

Modify ext4_ext_remove_space() and the code it calls to correct the
reserved cluster count for pending reservations (delayed allocated
clusters shared with allocated blocks) when a block range is removed
from the extent tree.  Pending reservations may be found for the clusters
at the ends of written or unwritten extents when a block range is removed.
If a physical cluster at the end of an extent is freed, it's necessary
to increment the reserved cluster count to maintain correct accounting
if the corresponding logical cluster is shared with at least one
delayed and unwritten extent as found in the extents status tree.

Add a new function, ext4_rereserve_cluster(), to reapply a reservation
on a delayed allocated cluster sharing blocks with a freed allocated
cluster.  To avoid ENOSPC on reservation, a flag is applied to
ext4_free_blocks() to briefly defer updating the freeclusters counter
when an allocated cluster is freed.  This prevents another thread
from allocating the freed block before the reservation can be reapplied.

Redefine the partial cluster object as a struct to carry more state
information and to clarify the code using it.

Adjust the conditional code structure in ext4_ext_remove_space to
reduce the indentation level in the main body of the code to improve
readability.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit b6bf9171ef5c37b66d446378ba63af5339a56a97 upstream.

Ext4 does not always reduce the reserved cluster count by the number
of clusters allocated when mapping a delayed extent.  It sometimes
adds back one or more clusters after allocation if delalloc blocks
adjacent to the range allocated by ext4_ext_map_blocks() share the
clusters newly allocated for that range.  However, this overcounts
the number of clusters needed to satisfy future mapping requests
(holding one or more reservations for clusters that have already been
allocated) and premature ENOSPC and quota failures, etc., result.

Ext4 also does not reduce the reserved cluster count when allocating
clusters for non-delayed allocated writes that have previously been
reserved for delayed writes.  This also results in overcounts.

To make it possible to handle reserved cluster accounting for
fallocated regions in the same manner as used for other non-delayed
writes, do the reserved cluster accounting for them at the time of
allocation.  In the current code, this is only done later when a
delayed extent sharing the fallocated region is finally mapped.

Address comment correcting handling of unsigned long long constant
from Jan Kara's review of RFC version of this patch.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 0b02f4c0d6d9e2c611dfbdd4317193e9dca740e6 upstream.

The code in ext4_da_map_blocks sometimes reserves space for more
delayed allocated clusters than it should, resulting in premature
ENOSPC, exceeded quota, and inaccurate free space reporting.

Fix this by checking for written and unwritten blocks shared in the
same cluster with the newly delayed allocated block.  A cluster
reservation should not be made for a cluster for which physical space
has already been allocated.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 1dc0aa46e74a3366e12f426b7caaca477853e9c3 upstream.

Add new pending reservation mechanism to help manage reserved cluster
accounting.  Its primary function is to avoid the need to read extents
from the disk when invalidating pages as a result of a truncate, punch
hole, or collapse range operation.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit ad431025aecda85d3ebef5e4a3aca5c1c681d0c7 upstream.

Ext4 contains a few functions that are used to search for delayed
extents or blocks in the extents status tree.  Rather than duplicate
code to add new functions to search for extents with different status
values, such as written or a combination of delayed and unwritten,
generalize the existing code to search for caller-specified extents
status values.  Also, move this code into extents_status.c where it
is better associated with the data structures it operates upon, and
where it can be more readily used to implement new extents status tree
functions that might want a broader scope for i_es_lock.

Three missing static specifiers in RFC version of patch reported and
fixed by Fengguang Wu <fengguang.wu@intel.com>.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: NJiufei Xue <jiufei.xue@linux.alibaba.com>

commit 95310e348a321b45fb746c176961d4da72344282 upstream

Fix a minor typo in the MDS documentation: "eanbled" -> "enabled".
Reported-by: NJeff Bastian <jbastian@redhat.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>