提交 4a71b90d 编写于 作者: B Ben Laurie

Add support for 3DES CBCM mode.

上级 436d318c
......@@ -5,6 +5,12 @@
Changes between 0.9.1c and 0.9.2
*) Add support for Triple DES Cipher Block Chaining with Output Feedback
Masking (CBCM). In the absence of test vectors, the best I have been able
to do is check that the decrypt undoes the encrypt, so far. Send me test
vectors if you have them.
[Ben Laurie]
*) Correct caclulation of key length for export ciphers (too much space was
allocated for null ciphers). This has not been tested!
[Ben Laurie]
......
......@@ -30,14 +30,15 @@ LIBSRC= cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c \
qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c \
des_enc.c fcrypt_b.c read2pwd.c \
fcrypt.c xcbc_enc.c \
str2key.c cfb64ede.c ofb64ede.c supp.c
str2key.c cfb64ede.c ofb64ede.c supp.c ede_cbcm_enc.c
LIBOBJ= set_key.o ecb_enc.o cbc_enc.o \
ecb3_enc.o cfb64enc.o cfb64ede.o cfb_enc.o ofb64ede.o \
enc_read.o enc_writ.o ofb64enc.o \
ofb_enc.o str2key.o pcbc_enc.o qud_cksm.o rand_key.o \
${DES_ENC} read2pwd.o \
fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o cbc_cksm.o supp.o
fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o cbc_cksm.o supp.o \
ede_cbcm_enc.o
SRC= $(LIBSRC)
......
......@@ -318,7 +318,7 @@ int argc;
char *argv[];
{
int i,j,err=0;
des_cblock in,out,outin,iv3;
des_cblock in,out,outin,iv3,iv2;
des_key_schedule ks,ks2,ks3;
unsigned char cbc_in[40];
unsigned char cbc_out[40];
......@@ -328,6 +328,58 @@ char *argv[];
int num;
char *str;
printf("Doing cbcm\n");
if ((j=des_key_sched((C_Block *)cbc_key,ks)) != 0)
{
printf("Key error %d\n",j);
err=1;
}
if ((j=des_key_sched((C_Block *)cbc2_key,ks2)) != 0)
{
printf("Key error %d\n",j);
err=1;
}
if ((j=des_key_sched((C_Block *)cbc3_key,ks3)) != 0)
{
printf("Key error %d\n",j);
err=1;
}
memset(cbc_out,0,40);
memset(cbc_in,0,40);
i=strlen((char *)cbc_data)+1;
/* i=((i+7)/8)*8; */
memcpy(iv3,cbc_iv,sizeof(cbc_iv));
memset(iv2,'\0',sizeof iv2);
des_ede3_cbcm_encrypt(cbc_data,cbc_out,16L,ks,ks2,ks3,iv3,iv2,
DES_ENCRYPT);
des_ede3_cbcm_encrypt(&cbc_data[16],&cbc_out[16],i-16,ks,ks2,ks3,
iv3,iv2,DES_ENCRYPT);
/* if (memcmp(cbc_out,cbc3_ok,
(unsigned int)(strlen((char *)cbc_data)+1+7)/8*8) != 0)
{
printf("des_ede3_cbc_encrypt encrypt error\n");
err=1;
}
*/
memcpy(iv3,cbc_iv,sizeof(cbc_iv));
memset(iv2,'\0',sizeof iv2);
des_ede3_cbcm_encrypt(cbc_out,cbc_in,i,ks,ks2,ks3,iv3,iv2,DES_DECRYPT);
if (memcmp(cbc_in,cbc_data,strlen(cbc_data)+1) != 0)
{
int n;
printf("des_ede3_cbcm_encrypt decrypt error\n");
for(n=0 ; n < i ; ++n)
printf(" %02x",cbc_data[n]);
printf("\n");
for(n=0 ; n < i ; ++n)
printf(" %02x",cbc_in[n]);
printf("\n");
err=1;
}
printf("Doing ecb\n");
for (i=0; i<NUM_TESTS; i++)
{
......
/* ede_cbcm_enc.c */
/* Written by Ben Laurie <ben@algroup.co.uk> for the OpenSSL
* project 13 Feb 1999.
*/
/* ====================================================================
* Copyright (c) 1999 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/*
This is an implementation of Triple DES Cipher Block Chaining with Output
Feedback Masking, by Coppersmith, Johnson and Matyas, (IBM and Certicom).
*/
#include "des_locl.h"
void des_ede3_cbcm_encrypt(const unsigned char *input,unsigned char *output,
long length,
des_key_schedule ks1,des_key_schedule ks2,
des_key_schedule ks3,
des_cblock ivec1,des_cblock ivec2,
int enc)
{
register DES_LONG tin0,tin1;
register DES_LONG tout0,tout1,xor0,xor1,m0,m1;
register unsigned char *in,*out;
register long l=length;
DES_LONG tin[2];
unsigned char *iv1,*iv2;
in=(unsigned char *)input;
out=(unsigned char *)output;
iv1=(unsigned char *)ivec1;
iv2=(unsigned char *)ivec2;
if (enc)
{
c2l(iv1,m0);
c2l(iv1,m1);
c2l(iv2,tout0);
c2l(iv2,tout1);
for (l-=8; l>=-7; l-=8)
{
tin[0]=m0;
tin[1]=m1;
des_encrypt(tin,ks3,1);
m0=tin[0];
m1=tin[1];
if(l < 0)
{
c2ln(in,tin0,tin1,l+8);
}
else
{
c2l(in,tin0);
c2l(in,tin1);
}
tin0^=tout0;
tin1^=tout1;
tin[0]=tin0;
tin[1]=tin1;
des_encrypt(tin,ks1,1);
tin[0]^=m0;
tin[1]^=m1;
des_encrypt(tin,ks2,0);
tin[0]^=m0;
tin[1]^=m1;
des_encrypt(tin,ks1,1);
tout0=tin[0];
tout1=tin[1];
l2c(tout0,out);
l2c(tout1,out);
}
iv1=(unsigned char *)ivec1;
l2c(m0,iv1);
l2c(m1,iv1);
iv2=(unsigned char *)ivec2;
l2c(tout0,iv2);
l2c(tout1,iv2);
}
else
{
register DES_LONG t0,t1;
c2l(iv1,m0);
c2l(iv1,m1);
c2l(iv2,xor0);
c2l(iv2,xor1);
for (l-=8; l>=-7; l-=8)
{
tin[0]=m0;
tin[1]=m1;
des_encrypt(tin,ks3,1);
m0=tin[0];
m1=tin[1];
c2l(in,tin0);
c2l(in,tin1);
t0=tin0;
t1=tin1;
tin[0]=tin0;
tin[1]=tin1;
des_encrypt(tin,ks1,0);
tin[0]^=m0;
tin[1]^=m1;
des_encrypt(tin,ks2,1);
tin[0]^=m0;
tin[1]^=m1;
des_encrypt(tin,ks1,0);
tout0=tin[0];
tout1=tin[1];
tout0^=xor0;
tout1^=xor1;
if(l < 0)
{
l2cn(tout0,tout1,out,l+8);
}
else
{
l2c(tout0,out);
l2c(tout1,out);
}
xor0=t0;
xor1=t1;
}
iv1=(unsigned char *)ivec1;
l2c(m0,iv1);
l2c(m1,iv1);
iv2=(unsigned char *)ivec2;
l2c(xor0,iv2);
l2c(xor1,iv2);
}
tin0=tin1=tout0=tout1=xor0=xor1=0;
tin[0]=tin[1]=0;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册