In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Document removal of no-aes, no-hmac, no-rsa, no-sha and no-md5.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In Travis, do --strict-warnings on BUILDONLY configurations. This
ensures that the tests run even if --strict-warnings fail, and avoids
hiding unrelated test failures.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Rijndael is an old name for AES.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

This removes all scripts that deal with MINFO as well, since that's
only used by mk1mf.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Borland C++ 4.5 is very old and our "support" for it is already
non-existent, we might as well remove it.
Reviewed-by: NRich Salz <rsalz@openssl.org>

- Remove duplicate entry
- Add author for SSL_CIPHER query functions
- Note HKDF support in CHANGES and NEWS

[ci skip]
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Update the CHANGES and NEWS files with information about the recently added
AFALG engine and pipelining.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

* Perform ALPN after the SNI callback; the SSL_CTX may change due to
  that processing
* Add flags to indicate that we actually sent ALPN, to properly error
  out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Add functions to determine authentication, key-exchange, FIPS and AEAD.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

* Perform ALPN after the SNI callback; the SSL_CTX may change due to
  that processing
* Add flags to indicate that we actually sent ALPN, to properly error
  out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

 - Always prefer forward-secure handshakes.
 - Consistently order ECDSA above RSA.
 - Next, always prefer AEADs to non-AEADs, irrespective of strength.
 - Within AEADs, prefer GCM > CHACHA > CCM for a given strength.
 - Prefer TLS v1.2 ciphers to legacy ciphers.
 - Remove rarely used DSS, IDEA, SEED, CAMELLIA, CCM from the default
   list to reduce ClientHello bloat.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NBen Laurie <ben@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Change the ECC default curve list to be this, in order: x25519, secp256r1,
secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

RC4 based ciphersuites in libssl have been disabled by default. They can
be added back by building OpenSSL with the "enable-weak-ssl-ciphers"
Configure option at compile time.
Reviewed-by: NRich Salz <rsalz@openssl.org>

1) Simplify code with better PACKET methods.

2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.

3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.

4) Send an alert on ALPN protocol mismatch.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

The ubsec engine is now considered obsolete and therefore has been
removed.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The SRP user database lookup method SRP_VBASE_get_by_user had confusing
memory management semantics; the returned pointer was sometimes newly
allocated, and sometimes owned by the callee. The calling code has no
way of distinguishing these two cases.

Specifically, SRP servers that configure a secret seed to hide valid
login information are vulnerable to a memory leak: an attacker
connecting with an invalid username can cause a memory leak of around
300 bytes per connection.

Servers that do not configure SRP, or configure SRP but do not configure
a seed are not vulnerable.

In Apache, the seed directive is known as SSLSRPUnknownUserSeed.

To mitigate the memory leak, the seed handling in SRP_VBASE_get_by_user
is now disabled even if the user has configured a seed.

Applications are advised to migrate to SRP_VBASE_get1_by_user. However,
note that OpenSSL makes no strong guarantees about the
indistinguishability of valid and invalid logins. In particular,
computations are currently not carried out in constant time.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

We were kinda sorta using a mix of $disabled{"static-engine" and
$disabled{"dynamic-engine"} in Configure.  Let's avoid confusion,
choose one of them and stick to it.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

INSTALL_PREFIX is a confusing name, as there's also --prefix.
Instead, tag along with the rest of the open source world and adopt
the Makefile variable DESTDIR to designate the desired staging
directory.

The Configure option --install_prefix is removed, the only way to
designate a staging directory is with the Makefile variable (this is
also implemented for VMS' descrip.mms et al).
Reviewed-by: NRich Salz <rsalz@openssl.org>

To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.

This addresses RT 3647
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add utility macros REF_ASSERT_NOT and REF_PRINT_COUNT
This is also RT 4181
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>