The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven.  Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure.  The same protocol version constraints
are now applied in all code paths.  It is now much easier to add
new protocol versions without reworking the protocol selection
logic.

In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...).  Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

After openssl_zalloc, cleanup more "set to 0/NULL" assignments.
Many are from github feedback.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Add support for loading verify and chain stores in SSL_CONF.

Commands to set verify mode and client CA names.

Add documentation.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add SSL_use_certiicate_chain file functions: this is works the same
way as SSL_CTX_use_certificate_chain_file but for an SSL structure.

Update SSL_CONF code to use the new function.
Update docs.
Update ordinals.
Reviewed-by: NRich Salz <rsalz@openssl.org>

For the various string-compare routines (strcmp, strcasecmp, str.*cmp)
use "strcmp()==0" instead of "!strcmp()"
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add command line switch entries to table and return SSL_CONF_TYPE_NONE for
them in SSL_CONF_cmd_value_type.

Update docs.
Reviewed-by: NRich Salz <rsalz@openssl.org>

For a local variable:
        TYPE *p;
Allocations like this are "risky":
        p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption.  Instead do this:
        p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add OSSL_NELEM macro to e_os.h to determine the number of elements in an
array.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This is merges the old "rsalz-monolith" branch over to master.  The biggest
change is that option parsing switch from cascasding 'else if strcmp("-foo")'
to a utility routine and somethin akin to getopt.  Also, an error in the
command line no longer prints the full summary; use -help (or --help :)
for that.  There have been many other changes and code-cleanup, see
bullet list below.

Special thanks to Matt for the long and detailed code review.

TEMPORARY:
        For now, comment out CRYPTO_mem_leaks() at end of main

Tickets closed:
        RT3515: Use 3DES in pkcs12 if built with no-rc2
        RT1766: s_client -reconnect and -starttls broke
        RT2932: Catch write errors
        RT2604: port should be 'unsigned short'
        RT2983: total_bytes undeclared #ifdef RENEG
        RT1523: Add -nocert to fix output in x509 app
        RT3508: Remove unused variable introduced by b09eb246
        RT3511: doc fix; req default serial is random
        RT1325,2973: Add more extensions to c_rehash
        RT2119,3407: Updated to dgst.pod
        RT2379: Additional typo fix
        RT2693: Extra include of string.h
        RT2880: HFS is case-insensitive filenames
        RT3246: req command prints version number wrong

Other changes; incompatibilities marked with *:
        Add SCSV support
        Add -misalign to speed command
        Make dhparam, dsaparam, ecparam, x509 output C in proper style
        Make some internal ocsp.c functions void
        Only display cert usages with -help in verify
        Use global bio_err, remove "BIO*err" parameter from functions
        For filenames, - always means stdin (or stdout as appropriate)
        Add aliases for -des/aes "wrap" ciphers.
        *Remove support for IISSGC (server gated crypto)
        *The undocumented OCSP -header flag is now "-header name=value"
        *Documented the OCSP -header flag
Reviewed-by: NMatt Caswell <matt@openssl.org>

This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free
BIO_free BIO_free_all BIO_vfree
Reviewed-by: NMatt Caswell <matt@openssl.org>

Support loading of key and certificate from the same file if
SSL_CONF_FLAG_REQUIRE_PRIVATE is set. This is done by remembering the
filename used for each certificate type and attempting to load a private
key from the file when SSL_CONF_CTX_finish is called.

Update docs.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: NMatt Caswell <matt@openssl.org>

Suggested by John Foley <foleyj@cisco.com>.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

RT#3625
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

The only support for SSLv2 left is receiving a SSLv2 compatible client hello.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

(cherry picked from commit 1f44dac24d1cb752b1a06be9091bb03a88a8598e)

PR#3172

Add -ecdh_single option to set SSL_OP_SINGLE_ECDH_USE on the command line.
(cherry picked from commit f14a4a861d2d221ed565a75441a218f85b8db530)

Extend SSL_CONF to return command value types.

Add certificate and key options.

Update documentation.