Skip to content

R
rt-thread

RT-Thread / rt-thread
9 个月 前同步成功

通知 752
Star 8909
Fork 4735
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 05481094 编写于 作者: F FindYGL
浏览文件
操作

修改之前BSP版本存在的一些问题，使之符合规范

上级 f1a13e1f
隐藏空白更改
内联 并排
Showing with 181 addition and 168 deletion
bsp/stm32/stm32f103-dofly-lyc8/.config
浏览文件 @ 05481094
......@@ -320,7 +320,7 @@ CONFIG_SOC_SERIES_STM32F1=y
#
# Hardware Drivers Config
#
CONFIG_SOC_STM32F103c8=y
CONFIG_SOC_STM32F103C8=y
#
# Onboard Peripheral Drivers
......@@ -329,8 +329,10 @@ CONFIG_SOC_STM32F103c8=y
#
# On-chip Peripheral Drivers
#
# CONFIG_BSP_USING_GPIO is not set
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_UART1_RX_USING_DMA is not set
#
# Board extended module Drivers
......
bsp/stm32/stm32f103-dofly-lyc8/README.md
浏览文件 @ 05481094
# STM32F103 霸道开发板 BSP 说明
# STM32F103 德飞莱开发板 BSP 说明
## 简介
......@@ -26,7 +26,6 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
- MCU：STM32F103C8T6，主频 72MHz，64KB FLASH ，20KB RAM
- 常用外设
- LED：1个普通LED，LED1（红色，PB8）
- 常用接口：USB 转串口
- 调试接口，标准 JTAG/SWD
## 外设支持
......@@ -35,16 +34,16 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- |
| USB 转串口 | 支持 | |
| 红色LED | 支持 | 使用PB8 |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PB15 ---> PIN: 0, 1...47|
| UART | 支持 | UART1 |
| SPI | 暂不支持 | |
| I2C | 暂不支持 | |
| RTC | 暂不支持 | |
| PWM | 暂不支持 | |
| **扩展模块** | **支持情况** | **备注** |
| | | |
| SPI | 暂不支持 | 即将支持 |
| I2C | 暂不支持 | 即将支持 |
| ADC | 暂不支持 | 即将支持 |
| PWM | 暂不支持 | 即将支持 |
| **扩展模块** | **支持情况** | **备注** |
| | | |
## 使用说明
......@@ -88,7 +87,7 @@ msh >
```
### 进阶使用
此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 ADC、PWM等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
1. 在 bsp 下打开 env 工具。
......
bsp/stm32/stm32f103-dofly-lyc8/board/Kconfig
浏览文件 @ 05481094
menu "Hardware Drivers Config"
config SOC_STM32F103c8
config SOC_STM32F103C8
bool
select SOC_SERIES_STM32F1
default y
......@@ -16,11 +16,21 @@ menu "On-chip Peripheral Drivers"
select RT_USING_PIN
default y
config BSP_USING_UART1
bool "Enable UART1"
select RT_USING_SERIAL
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_UART1
bool "Enable UART1"
default y
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
endif
endmenu
menu "Board extended module Drivers"
......
bsp/stm32/stm32f103-dofly-lyc8/board/linker_scripts/link.lds
浏览文件 @ 05481094
......@@ -5,7 +5,7 @@
/* Program Entry, set to mark it as "used" and avoid gc */
MEMORY
{
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 128KB flash */
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
RAM (rw) : ORIGIN = 0x20000000, LENGTH = 20k /* 20K sram */
}
ENTRY(Reset_Handler)
......
bsp/stm32/stm32f103-dofly-lyc8/project.uvoptx
浏览文件 @ 05481094
......@@ -127,7 +127,7 @@
<tRSysVw>1</tRSysVw>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<nTsel>3</nTsel>
<nTsel>5</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
......@@ -138,7 +138,7 @@
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
<pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
</DebugOpt>
<TargetDriverDllRegistry>
<SetRegEntry>
......@@ -149,7 +149,7 @@
<SetRegEntry>
<Number>0</Number>
<Key>JL2CM3</Key>
<Name>-U4294967295 -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("ST TMC") -D01(16410041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
<Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
</SetRegEntry>
<SetRegEntry>
<Number>0</Number>
......@@ -203,7 +203,7 @@
</Target>
<Group>
<GroupName>Applications</GroupName>
<GroupName>Kernel</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
......@@ -215,207 +215,207 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>applications\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
<FilenameWithoutPath>clock.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>board\board.c</PathWithFileName>
<FilenameWithoutPath>board.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\components.c</PathWithFileName>
<FilenameWithoutPath>components.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
<FilenameWithoutPath>cpu.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>2</FileType>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName>
<FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\device.c</PathWithFileName>
<FilenameWithoutPath>device.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
<FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
<FilenameWithoutPath>idle.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
<FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
<FilenameWithoutPath>ipc.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>2</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
<FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
<FilenameWithoutPath>irq.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Kernel</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
<FilenameWithoutPath>clock.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
<FilenameWithoutPath>kservice.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\components.c</PathWithFileName>
<FilenameWithoutPath>components.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
<FilenameWithoutPath>cpu.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
<FilenameWithoutPath>mempool.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\device.c</PathWithFileName>
<FilenameWithoutPath>device.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\object.c</PathWithFileName>
<FilenameWithoutPath>object.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>12</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
<FilenameWithoutPath>idle.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
<FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>13</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
<FilenameWithoutPath>ipc.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
<FilenameWithoutPath>signal.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>14</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
<FilenameWithoutPath>irq.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
<FilenameWithoutPath>thread.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>1</GroupNumber>
<FileNumber>15</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
<FilenameWithoutPath>kservice.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
<FilenameWithoutPath>timer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Applications</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<GroupNumber>2</GroupNumber>
<FileNumber>16</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath>
<PathWithFileName>applications\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>17</FileNumber>
......@@ -423,8 +423,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
<FilenameWithoutPath>mempool.c</FilenameWithoutPath>
<PathWithFileName>board\board.c</PathWithFileName>
<FilenameWithoutPath>board.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -435,20 +435,20 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\object.c</PathWithFileName>
<FilenameWithoutPath>object.c</FilenameWithoutPath>
<PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName>
<FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>19</FileNumber>
<FileType>1</FileType>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
<FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
<PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName>
<FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -459,8 +459,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
<FilenameWithoutPath>signal.c</FilenameWithoutPath>
<PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
<FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -471,8 +471,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
<FilenameWithoutPath>thread.c</FilenameWithoutPath>
<PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
<FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -483,16 +483,16 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
<FilenameWithoutPath>timer.c</FilenameWithoutPath>
<PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
<FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
</Group>
<Group>
<GroupName>CORTEX-M3</GroupName>
<tvExp>1</tvExp>
<GroupName>cpu</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
......@@ -503,20 +503,20 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName>
<FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
<FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>24</FileNumber>
<FileType>2</FileType>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName>
<FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
<PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
<FilenameWithoutPath>div0.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -527,8 +527,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
<FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
<FilenameWithoutPath>showmem.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -539,20 +539,20 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
<FilenameWithoutPath>div0.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName>
<FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<FileType>2</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
<FilenameWithoutPath>showmem.c</FilenameWithoutPath>
<PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName>
<FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
......@@ -560,7 +560,7 @@
<Group>
<GroupName>DeviceDrivers</GroupName>
<tvExp>1</tvExp>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
......
bsp/stm32/stm32f103-dofly-lyc8/project.uvprojx
浏览文件 @ 05481094
......@@ -53,7 +53,7 @@
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation>
<BrowseInformation>0</BrowseInformation>
<ListingPath>.\build\keil\List\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
......@@ -334,7 +334,7 @@
<MiscControls></MiscControls>
<Define>STM32F103xB, USE_HAL_DRIVER</Define>
<Undefine></Undefine>
<IncludePath>applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
<IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
</VariousControls>
</Cads>
<Aads>
......@@ -367,58 +367,13 @@
<ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc>--keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<Misc> --keep *.o(.rti_fn.*) --keep *.o(FSymTab)</Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
<Groups>
<Group>
<GroupName>Applications</GroupName>
<Files>
<File>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>applications\main.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<Files>
<File>
<FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Kernel</GroupName>
<Files>
......@@ -500,18 +455,53 @@
</Files>
</Group>
<Group>
<GroupName>CORTEX-M3</GroupName>
<GroupName>Applications</GroupName>
<Files>
<File>
<FileName>cpuport.c</FileName>
<FileName>main.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
<FilePath>applications\main.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Drivers</GroupName>
<Files>
<File>
<FileName>context_rvds.S</FileName>
<FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>board\board.c</FilePath>
</File>
<File>
<FileName>stm32f1xx_hal_msp.c</FileName>
<FileType>1</FileType>
<FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
</File>
<File>
<FileName>startup_stm32f103xb.s</FileName>
<FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
<FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
</File>
<File>
<FileName>drv_gpio.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
</File>
<File>
<FileName>drv_usart.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
</File>
<File>
<FileName>drv_common.c</FileName>
<FileType>1</FileType>
<FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>cpu</GroupName>
<Files>
<File>
<FileName>backtrace.c</FileName>
<FileType>1</FileType>
......@@ -527,6 +517,16 @@
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
</File>
<File>
<FileName>cpuport.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
</File>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
</File>
</Files>
</Group>
<Group>
......
bsp/stm32/stm32f103-dofly-lyc8/rtconfig.h
浏览文件 @ 05481094
......@@ -161,12 +161,14 @@
/* Hardware Drivers Config */
#define SOC_STM32F103c8
#define SOC_STM32F103C8
/* Onboard Peripheral Drivers */
/* On-chip Peripheral Drivers */
#define BSP_USING_GPIO
#define BSP_USING_UART
#define BSP_USING_UART1
/* Board extended module Drivers */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或