qmk build system

25f293d4 · huangjimin · 3f3b4f15 · 25f293d4 · 25f293d4 · 25f293d4
10 changed file
--- a/arch/Makefile
+++ b/arch/Makefile
@@ -41,7 +41,7 @@ endif
 endif

 # arch src should be specify by bp
-LSRCS:=$(subst $(QTOP)/$(LOCALDIR)/,, ${ARCH_LSCRS})
+LSRCS := $(subst $(QTOP)/$(LOCALDIR)/,, ${ARCH_LSCRS})
 include ${QTOP}/qmk/generic/Make.tpl


--- a/board/Linux_Posix/hello_world/Makefile
+++ b/board/Linux_Posix/hello_world/Makefile
@@ -20,6 +20,7 @@ ifeq ($(QTOP),)
 $(error Please run this in a tree)
 endif
 LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
+export QTOP

 ####################################################################

@@ -30,10 +31,9 @@ TREE_LIB_ENABLE=1
 lib=
 subdirs =

-include ${QTOP}/qmk/generic/Make.tpl

 all::
-	make -C ${QTOP}/arch
+	make -C ${QTOP}/arch BP=Linux_Posix
 	make -C ${QTOP}/kernel
 	make -C ${QTOP}/osal
 	make -C ${QTOP}/net
@@ -44,6 +44,7 @@ LD_A_FILES += $(LIBDIR)/libkernel.a
 LD_A_FILES += $(LIBDIR)/libhello_world.a
 LD_A_FILES += $(LIBDIR)/libcmsis_os.a
 LDFLAGS += -lpthread
+
 include ${QTOP}/qmk/generic/Make.exec


--- a/board/Linux_Posix/hello_world/inc/lwipopts.h
+++ b/board/Linux_Posix/hello_world/inc/lwipopts.h
+/**
+  ******************************************************************************
+  * @file    lwipopts.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    31-July-2013
+  * @brief   lwIP Options Configuration.
+  *          This file is based on Utilities\lwip_v1.4.1\src\include\lwip\opt.h
+  *          and contains the lwIP configuration for the STM32F4x7 demonstration.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software
+  * distributed under the License is distributed on an "AS IS" BASIS,
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+#ifndef __LWIPOPTS_H__
+#define __LWIPOPTS_H__
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#define SYS_LIGHTWEIGHT_PROT 1
+
+/**
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#define NO_SYS 0
+
+/**
+ * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
+ * Mainly for compatibility to old versions.
+ */
+#define NO_SYS_NO_TIMERS 0
+
+/* ---------- Memory options ---------- */
+/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
+   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
+   byte alignment -> define MEM_ALIGNMENT to 2. */
+#define MEM_ALIGNMENT 4
+
+/* MEM_SIZE: the size of the heap memory. If the application will send
+a lot of data that needs to be copied, this should be set high. */
+#define MEM_SIZE (5 * 1024)
+
+/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
+   sends a lot of data out of ROM (or other static memory), this
+   should be set high. */
+#define MEMP_NUM_PBUF 25
+/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+   per active UDP "connection". */
+#define MEMP_NUM_UDP_PCB 4
+/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
+   connections. */
+#define MEMP_NUM_TCP_PCB 6
+/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
+   connections. */
+#define MEMP_NUM_TCP_PCB_LISTEN 6
+/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
+   segments. */
+#define MEMP_NUM_TCP_SEG 150
+/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
+   timeouts. */
+#define MEMP_NUM_SYS_TIMEOUT 6
+
+/* ---------- Pbuf options ---------- */
+/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */
+#define PBUF_POOL_SIZE 25
+/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
+#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS + 40 + PBUF_LINK_ENCAPSULATION_HLEN + PBUF_LINK_HLEN)
+
+/* ---------- TCP options ---------- */
+#define LWIP_TCP 1
+#define TCP_TTL 255
+
+/* Controls if TCP should queue segments that arrive out of
+   order. Define to 0 if your device is low on memory. */
+#define TCP_QUEUE_OOSEQ 0
+
+/* TCP Maximum segment size. */
+#define TCP_MSS (1500 - 40) /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */
+
+/* TCP sender buffer space (bytes). */
+#define TCP_SND_BUF (7 * TCP_MSS)
+
+/*  TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+  as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */
+
+#define TCP_SND_QUEUELEN (8 * TCP_SND_BUF / TCP_MSS)
+
+/* TCP receive window. */
+#define TCP_WND (9 * TCP_MSS)
+
+/* ---------- ICMP options ---------- */
+#define LWIP_ICMP 1
+
+/* ---------- DHCP options ---------- */
+/* Define LWIP_DHCP to 1 if you want DHCP configuration of
+   interfaces. DHCP is not implemented in lwIP 0.5.1, however, so
+   turning this on does currently not work. */
+#define LWIP_DHCP 1
+
+/* ---------- UDP options ---------- */
+#define LWIP_UDP 1
+#define UDP_TTL 255
+
+/* ---------- Statistics options ---------- */
+#define LWIP_STATS 0
+#define LWIP_PROVIDE_ERRNO 1
+
+/* ---------- link callback options ---------- */
+/* LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#define LWIP_NETIF_LINK_CALLBACK 0
+/*
+   --------------------------------------
+   ---------- Checksum options ----------
+   --------------------------------------
+*/
+
+/*
+The STM32F4x7 allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware:
+ - To use this feature let the following define uncommented.
+ - To disable it and process by CPU comment the  the checksum.
+*/
+#define CHECKSUM_BY_HARDWARE
+//#undef CHECKSUM_BY_HARDWARE
+
+#ifdef CHECKSUM_BY_HARDWARE
+/* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/
+#define CHECKSUM_GEN_IP 0
+/* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/
+#define CHECKSUM_GEN_UDP 0
+/* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/
+#define CHECKSUM_GEN_TCP 0
+/* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/
+#define CHECKSUM_CHECK_IP 0
+/* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/
+#define CHECKSUM_CHECK_UDP 0
+/* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/
+#define CHECKSUM_CHECK_TCP 0
+/* CHECKSUM_CHECK_ICMP==0: Check checksums by hardware for incoming ICMP packets.*/
+#define CHECKSUM_GEN_ICMP 0
+#else
+/* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/
+#define CHECKSUM_GEN_IP 1
+/* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/
+#define CHECKSUM_GEN_UDP 1
+/* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/
+#define CHECKSUM_GEN_TCP 1
+/* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/
+#define CHECKSUM_CHECK_IP 1
+/* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/
+#define CHECKSUM_CHECK_UDP 1
+/* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/
+#define CHECKSUM_CHECK_TCP 1
+/* CHECKSUM_CHECK_ICMP==1: Check checksums by hardware for incoming ICMP packets.*/
+#define CHECKSUM_GEN_ICMP 1
+#endif
+
+#define LWIP_TCPIP_CORE_LOCKING 1
+
+/*
+   ----------------------------------------------
+   ---------- Sequential layer options ----------
+   ----------------------------------------------
+*/
+/**
+ * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
+ */
+#define LWIP_NETCONN 1
+
+/*
+   ------------------------------------
+   ---------- Socket options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
+ */
+#define LWIP_SOCKET 1
+
+/*
+   ---------------------------------
+   ---------- OS options ----------
+   ---------------------------------
+*/
+
+#define DEFAULT_UDP_RECVMBOX_SIZE       10
+#define DEFAULT_TCP_RECVMBOX_SIZE       10
+#define DEFAULT_ACCEPTMBOX_SIZE         10
+#define DEFAULT_THREAD_STACKSIZE        1024 * 2
+
+#define TCPIP_THREAD_NAME               "lwip"
+#define TCPIP_THREAD_STACKSIZE          1024
+#define TCPIP_MBOX_SIZE                 10
+#define TCPIP_THREAD_PRIO               1
+
+#define LWIP_DNS_API_DECLARE_STRUCTS        1
+#define LWIP_DNS                                1
+
+/** DNS server IP address */
+#ifndef DNS_SERVER_ADDRESS
+#define DNS_SERVER_ADDRESS(ipaddr)        (ip4_addr_set_u32(ipaddr, ipaddr_addr("208.67.222.222"))) /* resolver1.opendns.com */
+#endif
+
+/*
+   ----------------------------------------
+   ---------- Lwip Debug options ----------
+   ----------------------------------------
+*/
+#define LWIP_DEBUG 0
+
+#define ethernet_with_mac 1
+
+#endif /* __LWIPOPTS_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- a/board/Linux_Posix/hello_world/inc/tos_config.h
+++ b/board/Linux_Posix/hello_world/inc/tos_config.h
@@ -2,12 +2,13 @@
 #define _TOS_CONFIG_H_

 #include "stddef.h"
+#include "stdint.h"

 #define TOS_CFG_TASK_PRIO_MAX 10u // 配置TencentOS tiny默认支持的最大优先级数量

 #define TOS_CFG_ROUND_ROBIN_EN 1u // 配置TencentOS tiny的内核是否开启时间片轮转

-#define TOS_CFG_OBJECT_VERIFY 0u // 配置TencentOS tiny是否校验指针合法
+#define TOS_CFG_OBJECT_VERIFY_EN 1u // 配置TencentOS tiny是否校验指针合法

 #define TOS_CFG_EVENT_EN 1u // TencentOS tiny 事件模块功能宏

@@ -19,8 +20,12 @@

 #define TOS_CFG_MUTEX_EN 1u // 配置TencentOS tiny是否开启互斥锁模块

-#define TOS_CFG_QUEUE_EN 1u // 配置TencentOS tiny是否开启队列模块
+#define TOS_CFG_MESSAGE_QUEUE_EN        1u
+#define TOS_CFG_MAIL_QUEUE_EN           1u

+#define TOS_CFG_PRIORITY_MESSAGE_QUEUE_EN	1u
+
+#define TOS_CFG_PRIORITY_MAIL_QUEUE_EN	1u
 #define TOS_CFG_TIMER_EN 1u // 配置TencentOS tiny是否开启软件定时器模块

 #define TOS_CFG_SEM_EN 1u // 配置TencentOS tiny是否开启信号量模块
@@ -43,4 +48,4 @@

 #define TOS_CFG_TIMER_AS_PROC 1u // 配置是否将TIMER配置成函数模式

-#endif
\ No newline at end of file
+#endif
--- a/board/Linux_Posix/mqtt_demo/Makefile
+++ b/board/Linux_Posix/mqtt_demo/Makefile
+###################################################################
+#automatic detection QTOP and LOCALDIR
+CUR_DIR := $(patsubst %/,%,$(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
+TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
+        echo $$QTOP;\
+        else\
+        cd $(CUR_DIR); while /usr/bin/test ! -e qmk ; do \
+        dir=`cd ../;pwd`;                       \
+        if [ "$$dir" = "/" ] ; then             \
+           echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
+           exit 1;                              \
+        fi ;                                    \
+        cd $$dir;                               \
+        done ;                                  \
+        pwd;                                    \
+        fi)
+QTOP ?= $(realpath ${TRYQTOP})
+
+ifeq ($(QTOP),)
+$(error Please run this in a tree)
+endif
+LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
+export QTOP
+
+####################################################################
+
+
+export BP=Linux_Posix
+
+TREE_LIB_ENABLE=1
+lib=
+subdirs =
+
+CFGFLAGS += -I$(CUR_DIR)/inc
+CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
+CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/wrapper/include
+CFGFLAGS += -I$(QTOP)/components/connectivity/Eclipse-Paho-MQTT/3rdparty/include
+
+all::
+	make -C ${QTOP}/arch BP=Linux_Posix
+	make -C ${QTOP}/kernel
+	make -C ${QTOP}/osal
+	make -C ${QTOP}/net
+	make -C ${QTOP}/devices
+	make -C ${QTOP}/components/connectivity/Eclipse-Paho-MQTT
+
+exec = 
+LD_A_FILES += $(LIBDIR)/libarch.a
+LD_A_FILES += $(LIBDIR)/libkernel.a
+LD_A_FILES += $(LIBDIR)/libhello_world.a
+LD_A_FILES += $(LIBDIR)/libcmsis_os.a
+LD_A_FILES += $(LIBDIR)/libEclipse-Paho-MQTT.a
+LD_A_FILES += $(LIBDIR)/libsal_module_wrapper.a
+LDFLAGS += -lpthread
+
+include ${QTOP}/qmk/generic/Make.exec
+
+
--- a/board/Linux_Posix/mqtt_demo/inc/mqtt_config.h
+++ b/board/Linux_Posix/mqtt_demo/inc/mqtt_config.h
@@ -11,7 +11,7 @@
 #define MQTT_SUBSCRIBE_TOPIC    "$product/$dev/$sub"
 #define MQTT_PUBLISH_TOPIC      "$product/$dev/$pub"

-#error please replace yourself server configuration
+//#error please replace yourself server configuration
 /**
 * 1. run python tool
 * ```

--- a/components/connectivity/Eclipse-Paho-MQTT/Makefile
+++ b/components/connectivity/Eclipse-Paho-MQTT/Makefile
+###################################################################
+#automatic detection QTOP and LOCALDIR
+CUR_DIR := $(realpath $(dir $(realpath $(firstword $(MAKEFILE_LIST)))))
+TRYQTOP := $(shell if [ -n "$$QTOP" ] ; then\
+        echo $$QTOP;\
+        else\
+        cd $(CUR_DIR); while /usr/bin/test ! -d qmk ; do \
+        dir=`cd ../;pwd`;                       \
+        if [ "$$dir" = "/" ] ; then             \
+           echo Cannot find QTOP in $(firstword $(MAKEFILE_LIST)) 1>&2; \
+           exit 1;                              \
+        fi ;                                    \
+        cd $$dir;                               \
+        done ;                                  \
+        pwd;                                    \
+        fi)
+QTOP ?= $(realpath ${TRYQTOP})
+
+ifeq ($(QTOP),)
+$(error Please run this in a tree)
+endif
+LOCALDIR = $(patsubst %/,%,$(subst $(realpath $(QTOP))/,,$(CUR_DIR)))
+
+####################################################################
+
+
+TREE_LIB_ENABLE=1
+lib=
+subdirs=
+
+CFGFLAGS += -I$(CUR_DIR)/3rdparty/include 
+CFGFLAGS += -I$(CUR_DIR)/wrapper/include 
+CFGFLAGS += -I$(QTOP)/net/sal_module_wrapper
+
+LSRCS_DIR   += 3rdparty/src 
+LSRCS_DIR   += wrapper/src
+
+
+
+include ${QTOP}/qmk/generic/Make.tpl
+
+
--- a/qmk/arch-pack/ap.linux.posix.gcc
+++ b/qmk/arch-pack/ap.linux.posix.gcc
@@ -4,5 +4,5 @@ CFGFLAGS += -I${QTOP}/arch/linux/posix/gcc



-ARCH_LSCRS = $(wildcard ${QTOP}/arch/linux/posix/gcc/*.c)
+ARCH_LSCRS := $(wildcard ${QTOP}/arch/linux/posix/gcc/*.c)
 ARCH_LSCRS += $(wildcard ${QTOP}/arch/linux/common/*.c)
--- a/qmk/generic/Make.exec
+++ b/qmk/generic/Make.exec
@@ -6,13 +6,15 @@

 .SECONDARY:: ${LD_O_FILES}

+include $(QTOP)/qmk/generic/Make.tpl
+
 ifeq (,$(strip $(exec)))
 exec = $(shell basename $(shell dirname $(realpath $(firstword $(MAKEFILE_LIST)))))
 endif

 OUTDIR = ${BLDDIR}/out

-targetexec = ${OUTDIR}/${exec}
+targetexec = ${OUTDIR}/${exec}.elf

 all:: ${OUTDIR}/.tree ${targetexec}

@@ -31,8 +33,12 @@ endif
 _LD_START_GROUP := -Wl,--start-group
 _LD_END_GROUP := -Wl,--end-group

-$(targetexec): $(OUTDIR)/strip/.tree ${LD_O_FILES}
-	@rm -f $@       # Prevent core dump if currently running
+ifeq (,$(strip ${OBJCOPY}))
+OBJCOPY=$(subst strip,objcopy,$(STRIP))
+endif
+
+$(targetexec): $(OUTDIR)/.tree ${LD_O_FILES}
+	@/bin/rm -f $@       # Prevent core dump if currently running
 	@$(ECHO) "[$(BP)] LINK    $@" # This is needed for error parsing
 	$(Q)/bin/ls  $(LIBDIR)
 	$(Q)$(CC) \
@@ -40,17 +46,23 @@ $(targetexec): $(OUTDIR)/strip/.tree ${LD_O_FILES}
 	-L${LIBDIR}  \
 	$(_LD_START_GROUP) $(LD_O_FILES) $(LD_A_FILES) 	$(LD_L_LISTS) $(LDFLAGS) $(_LD_END_GROUP) \
 	$(LD_INFO_OPTS)
-	$(CP) $@ $(QTOP)
-	$(Q)$(STRIP) --strip-debug $@ -o $(OUTDIR)/strip/$(notdir $@)
-
+	$(Q)$(STRIP) --strip-debug $@ -o $(OUTDIR)/$(basename $(notdir $@)).strip
+	$(Q)$(OBJCOPY) -O binary -S $@ $(OUTDIR)/$(basename $(notdir $@)).bin
+	$(Q)$(OBJCOPY) -O ihex $@ $(OUTDIR)/$(basename $(notdir $@)).hex
+	$(CP) $(OUTDIR)/$(basename $(notdir $@)).* $(LIBDIR)/
+	@$(ECHO) -e "[$(BP)] INFO    [$(BP)] INFO    \e[1;32mLINK OK,OK,OK!!!\e[m"
+	@$(ECHO) -e "\e[1;32m$$(/bin/ls $(LIBDIR)/$(basename $(notdir $@)).*)\e[m"
+	

 install:: all

 clean::
 	$(Q)$(RM) ${BOBJS}
 	$(Q)$(RM) $(filter %.a ,$(LD_A_FILES))
-	$(Q)$(RM) ${bldroot_exec}
+	$(Q)$(RM) $(OUTDIR)/$(basename $(notdir ${targetexec})).*
+	$(Q)$(RM) $(LIBDIR)/$(basename $(notdir ${targetexec})).*

 distclean:: clean
        
 .PHONY: $(targetexec)
+
--- a/qmk/generic/Make.tpl
+++ b/qmk/generic/Make.tpl
@@ -96,7 +96,6 @@ BLD_SUFFIX := .tos
 endif

 BLDROOT = ${QTOP}/${QTOPBUILD}/$(if ${BLDCONFIG},${BLDCONFIG}/)${BP}.$(notdir  $(firstword $(CC)))${BLD_SUFFIX}
-#$(info BLDROOT=$(BLDROOT))


 ifdef LOCALDIR
@@ -106,13 +105,12 @@ BLDDIR = ${BLDROOT}
 endif

 LIBDIR = ${BLDROOT}
-OUTDIR = ${BLDROOT}/out
+


 #
 # In each directory, build a list of local sources, objects, and headers
 #
-
 ifeq (,$(strip ${LSRCS})) # LSRCS
 ifeq (,$(filter n no NO 0,$(TREE_LIB_ENABLE))) #  TREE_LIB_ENABLE yes

@@ -132,7 +130,12 @@ ifneq (,$(strip ${LSRCS_EXCLUDE_FILES}))
 $(info "ignore LSRCS_EXCLUDE_FILES source files: ${LSRCS_EXCLUDE_FILES}")
 endif

+ifndef LSRCS
 LSRCS   = $(filter-out $(patsubst ./%,%,${LSRCS_EXCLUDE_FILES}),${LSRCS_ALL})
+else
+$(info $(shell echo -e "[$(BP)] INFO    LSRCS is defined by users, LSRCS=$(LSRCS)"))
+endif
+
 LOBJS	=	$(addsuffix .o, $(basename ${LSRCS}))
 BOBJS	= 	$(addprefix ${BLDDIR}/,${LOBJS})