In order to implement reply buffer limits introduced in 2.6 and useful
to close the connection under user-selected circumastances of big output
buffers (for instance slow consumers in pub/sub, a blocked slave, and so
forth) Redis takes a counter with the amount of used memory in objects
inside the output list stored into c->reply.

The computation was broken in the function setDeferredMultiBulkLength(),
in the case the object was glued with the next one. This caused the
c->reply_bytes field to go out of sync, be subtracted more than needed,
and wrap back near to ULONG_MAX values.

This commit fixes this bug and adds an assertion that is able to trap
this class of problems.

This problem was discovered looking at the INFO output of an unrelated
issue (issue #547).

Because Redis 2.6 introduced new integer encodings it is no longer true
that if two entries have a different encoding they are not equal.

An old ziplist can be loaded from an RDB file generated with Redis 2.4,
in this case for instance a small unsigned integers is encoded with a
16 bit encoding, while in Redis 2.6 a more specific 8 bit encoding
format is used.

Because of this bug hashes ended with duplicated values or fields lookup
failed, causing many bad behaviors.
This in turn caused a crash while converting the ziplist encoded hash into
a real hash table because an assertion was raised on duplicated elements.

This commit fixes issue #547.

Many thanks to Pinterest's Marty Weiner and colleagues for discovering
the problem and helping us in the debugging process.

Right there is a mix of help entries ending with periods or
without periods. This standardizes the end of command as without
periods, which seems to be the general custom in most unix tools,
at least.

The new fuzzy tester also removes elements from the hash instead of just
adding random fields. This should increase the probability to find bugs
in the implementations of the hash type internal representations.

The ziplist -> hashtable conversion code is triggered every time an hash
value must be promoted to a full hash table because the number or size of
elements reached the threshold.

If a problem in the ziplist causes the same field to be present
multiple times, the assertion of successful addition of the element
inside the hash table will fail, crashing server with a failed
assertion, but providing little information about the problem.

This code adds a new logging function to perform the hex dump of binary
data, and makes sure that the ziplist -> hashtable conversion code uses
this new logging facility to dump the content of the ziplist when the
assertion fails.

This change was originally made in order to investigate issue #547.

A new stress test was added to stress test the code converting a ziplist
into an hash table.

In this commit also randomValue helper function was modified to also
return negative values.

wait_for_condition is now used instead of the usual "after 1000" (that
is the way to sleep in Tcl). This should avoid to find the replica in
a state where it is loading the RDB in memory, returning -LOADING error.

This test used to fail when running the test over valgrind, due to the
added latencies.

(additional commit notes by antirez@gmail.com):

The rdbIsObjectType() macro was not updated when the new RDB object type
of ziplist encoded hashes was added.

As a result RESTORE, that uses rdbLoadObjectType(), failed when a
ziplist encoded hash was loaded.
This does not affected normal RDB loading because in that case we use
the lower-level function rdbLoadType().

The commit also adds a regression test.

Improved comments to make clear that rdbLoadType() just loads a
general TYPE in the context of RDB that can be an object type or an
expire type, end-of-file, and so forth.

While rdbLoadObjectType() enforces that the type is a valid Object Type
otherwise it returns -1.

In the issue #529 an user reported a bug that can be triggered with the
following code:

flushdb
set a
"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"
bitop or x a b

The bug was introduced with the speed optimization in commit 8bbc0768
that specializes every BITOP operation loop up to the minimum length of
the input strings.

However the computation of the minimum length contained an error when a
non existing key was present in the input, after a key that was non zero
length.

This commit fixes the bug and adds a regression test for it.

Commit 33e1db36 modified the name of a
few INFO fields. This commit changes the Redis test to account for this
changes.

Migration information moved at the end of the file as now they start to
be too long to stay at the top, but a warning was added at the top of
the file to remember the user to check.

Added information about INFO fields that changed name between 2.4 and
2.6.

The 'persistence' section of INFO output now contains additional four
fields related to RDB and AOF persistence:

 rdb_last_bgsave_time_sec       Duration of latest BGSAVE in sec.
 rdb_current_bgsave_time_sec    Duration of current BGSAVE in sec.
 aof_last_rewrite_time_sec      Duration of latest AOF rewrite in sec.
 aof_current_rewrite_time_sec   Duration of current AOF rewrite in sec.

The 'current' fields are set to -1 if a BGSAVE / AOF rewrite is not in
progress. The 'last' fileds are set to -1 if no previous BGSAVE / AOF
rewrites were performed.

Additionally a few fields in the persistence section were renamed for
consistency:

 changes_since_last_save -> rdb_changes_since_last_save
 bgsave_in_progress -> rdb_bgsave_in_progress
 last_save_time -> rdb_last_save_time
 last_bgsave_status -> rdb_last_bgsave_status
 bgrewriteaof_in_progress -> aof_rewrite_in_progress
 bgrewriteaof_scheduled -> aof_rewrite_scheduled

After the renaming, fields in the persistence section start with rdb_ or
aof_ prefix depending on the persistence method they describe.
The field 'loading' and related fields are not prefixed because they are
unique for both the persistence methods.

This commit adds a fast-path to the BITOP that can be used for all the
bytes from 0 to the minimal length of the string, and if there are
at max 16 input keys.

Often the intersected bitmaps are roughly the same size, so this
optimization can provide a 10x speed boost to most real world usages
of the command.

Bytes are processed four full words at a time, in loops specialized
for the specific BITOP sub-command, without the need to check for
length issues with the inputs (since we run this algorithm only as far
as there is data from all the keys at the same time).

The remaining part of the string is intersected in the usual way using
the slow but generic algorith.

It is possible to do better than this with inputs that are not roughly
the same size, sorting the input keys by length, by initializing the
result string in a smarter way, and noticing that the final part of the
output string composed of only data from the longest string does not
need any proecessing since AND, OR and XOR against an empty string does
not alter the output (zero in the first case, and the original string in
the other two cases).

More implementations will be implemented later likely, but this should
be enough to release Redis 2.6-RC4 with bitops merged in.

Note: this commit also adds better testing for BITOP NOT command, that
is currently the faster and hard to optimize further since it just
flips the bits of a single input string.

A bug in the implementation caused BITOP to crash the server if at least
one one of the source objects was integer encoded.

The new implementation takes an additional array of Redis objects
pointers and calls getDecodedObject() to get a reference to a string
encoded object, and then uses decrRefCount() to release the object.

Tests modified to cover the regression and improve coverage.

At Redis's default optimization level the command is now much faster,
always using a constant-time bit manipualtion technique to count bits
instead of GCC builtin popcount, and unrolling the loop.

The current implementation performance is 1.5GB/s in a MBA 11" (1.8 Ghz
i7) compiled with both GCC and clang.

The algorithm used is described here:

http://graphics.stanford.edu/~seander/bithacks.html

bitop.c contains the "Bit related string operations" so it seems more
logical to call it bitops instead of bitop.
This also makes it matching the name of the test (unit/bitops.tcl).

Fuzzing tests of BITCOUNT / BITOP are iterated multiple times.
The new BITCOUNT fuzzing test uses random strings in a wider interval of
lengths including zero-len strings.

We run the array by 32 bit words instead of processing it byte per byte.
If the code is compiled using GCC __builtin_popcount() builtin function
is used instead.

The low level popualtion counting function is now separated from the
BITCOUNT command implementation, so that the low level function can be
further optimized and eventually used in other contexts if needed.

All the general string operations are implemented in t_string.c, however
the bit operations, while targeting the string type, are better served
in a specific file where we have the implementations of the following
four commands and helper functions:

    GETBIT
    SETBIT
    BITOP
    BITCOUNT

In the future this file will probably contain more code related to
making the BITOP and BITCOUNT operations faster.

The Redis implementation is tested against Tcl implementations of the
same operation. Both fuzzing and testing of specific aspects of the
commands behavior are performed.

The motivation for this new commands is to be search in the usage of
Redis for real time statistics. See the article "Fast real time metrics
using Redis".

http://blog.getspool.com/2011/11/29/fast-easy-realtime-metrics-using-redis-bitmaps/

In general Redis strings when used as bitmaps using the SETBIT/GETBIT
command provide a very space-efficient and fast way to store statistics.
For instance in a web application with users, every user can be
associated with a key that shows every day in which the user visited the
web service. This information can be really valuable to extract user
behaviour information.

With Redis bitmaps doing this is very simple just saying that a given
day is 0 (the data the service was put online) and all the next days are
1, 2, 3, and so forth. So with SETBIT it is possible to set the bit
corresponding to the current day every time the user visits the site.

It is possible to take the count of the bit sets on the run, this is
extremely easy using a Lua script. However a fast bit count native
operation can be useful, especially if it can operate on ranges, or when
the string is small like in the case of days (even if you consider many
years it is still extremely little data).

For this reason BITOP was introduced. The command counts the number of
bits set to 1 in a string, with optional range:

BITCOUNT key [start end]

The start/end parameters are similar to GETRANGE. If omitted the whole
string is tested.

Population counting is more useful when bit-level operations like AND,
OR and XOR are avaialble. For instance I can test multiple users to see
the number of days three users visited the site at the same time. To do
this we can take the AND of all the bitmaps, and then count the set bits.

For this reason the BITOP command was introduced:

BITOP [AND|OR|XOR|NOT] dest_key src_key1 src_key2 src_key3 ... src_keyN

In the special case of NOT (that inverts the bits) only one source key
can be passed.

The judicious use of BITCOUNT and BITOP combined can lead to interesting
use cases with very space efficient representation of data.

The implementation provided is still not tested and optimized for speed,
next commits will introduce unit tests. Later the implementation will be
profiled to see if it is possible to gain an important amount of speed
without making the code much more complex.

The INFO output, persistence section, already contained the field
describing the size of the current AOF buffer to flush on disk. However
the other AOF buffer, used to accumulate changes during an AOF rewrite,
was not mentioned in the INFO output.

This commit introduces a new field called aof_rewrite_buffer_length with
the length of the rewrite buffer.

During the AOF rewrite process, the parent process needs to accumulate
the new writes in an in-memory buffer: when the child will terminate the
AOF rewriting process this buffer (that ist the difference between the
dataset when the rewrite was started, and the current dataset) is
flushed to the new AOF file.

We used to implement this buffer using an sds.c string, but sds.c has a
2GB limit. Sometimes the dataset can be big enough, the amount of writes
so high, and the rewrite process slow enough that we overflow the 2GB
limit, causing a crash, documented on github by issue #504.

In order to prevent this from happening, this commit introduces a new
system to accumulate writes, implemented by a linked list of blocks of
10 MB each, so that we also avoid paying the reallocation cost.

Note that theoretically modern operating systems may implement realloc()
simply as a remaping of the old pages, thus with very good performances,
see for instance the mremap() syscall on Linux. However this is not
always true, and jemalloc by default avoids doing this because there are
issues with the current implementation of mremap().

For this reason we are using a linked list of blocks instead of a single
block that gets reallocated again and again.

The changes in this commit lacks testing, that will be performed before
merging into the unstable branch. This fix will not enter 2.4 because it
is too invasive. However 2.4 will log a warning when the AOF rewrite
buffer is near to the 2GB limit.

The user @jokea noticed that the following line of code into
replication.c made little sense:

    addReplySds(slave,sdsempty());

Investigating a bit I found that this was introduced by commit 6208b3a7
three years ago in the early stages of Redis. The code apparently is not
useful at all, so I'm removing it.

This change will not be backported into 2.4 so that in the rare case
this should introduce a bug, we'll have a chance to detect it into the
development branch. However following the code path it seems like the
code is not useful at all, so the risk is truly small.

The list of things to do is since long time in two places:

1) Github issues.
2) I've a private TOOD list of random ideas, what makes sense is later
moved to github issues. So github is anyway the true source of things to
do.

This makes the code more readable, it is still not the case to split the
file itself into three different files, but the logical separation
improves the readability especially since new commits are going to
introduce an additional section.

Due to a change in the format of the bug report in case of crash of
failed assertion the test suite was no longer able to properly log it.
Instead just a protocol error was logged by the Redis TCL client that
provided no clue about the actual problem.

This commit resolves the issue by logging everything from the first line
of the log including the string REDIS BUG REPORT, till the end of the
file.

Weeks ago trying to fix an harmless GCC warning I introduced a bug in
the ziplist-encoded implementations of sorted sets.

The bug completely broke zuiNext() iterator, that is used in the
ZINTERSTORE and ZUNIONSTORE implementation, so those two commands are no
longer reliable starting from Redis version 2.4.12 and latest 2.6.0-RC
releases.

This commit fixes the problem and adds a regression test.

In the commit upgrading jemalloc to version 3.0.0 I added the old
version of Jemalloc in the 'jemalloc.orig' directory for an error.
This commit removes the not useful version of jemalloc.

Full changelog here:

http://www.canonware.com/cgi-bin/gitweb.cgi?p=jemalloc.git;a=blob_plain;f=ChangeLog;hb=master

Notable improvements from the point of view of Redis:

1) Bugfixing.
2) Support for Valgrind.
3) Support for OSX Lion, FreeBSD.

Fix `install` target on OSX (see #495)

Support for Illumos event ports