Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 12
Star 1
Fork 0
R
raspberrypi-kernel

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 3f55f20e 编写于 作者: O openeuler-ci-bot 提交者： Gitee
浏览文件
操作

!7 arch/arm64/boot/dts/overlays 软连接到 arch/arm/boot/dts/overlays 

Merge pull request !7 from woqidaideshi/master
上级 7d1ed3ae 2bdbde1e
展开全部 隐藏空白更改
内联 并排
Showing with 1 addition and 18024 deletion
arch/arm64/boot/dts/overlays 0 → 120000
浏览文件 @ 3f55f20e
../../../arm/boot/dts/overlays
\ No newline at end of file
arch/arm64/boot/dts/overlays/Makefile 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
# Overlays for the Raspberry Pi platform
dtbo-$(CONFIG_ARCH_BCM2835) += \
act-led.dtbo \
adau1977-adc.dtbo \
adau7002-simple.dtbo \
ads1015.dtbo \
ads1115.dtbo \
ads7846.dtbo \
adv7282m.dtbo \
adv728x-m.dtbo \
akkordion-iqdacplus.dtbo \
allo-boss-dac-pcm512x-audio.dtbo \
allo-digione.dtbo \
allo-katana-dac-audio.dtbo \
allo-piano-dac-pcm512x-audio.dtbo \
allo-piano-dac-plus-pcm512x-audio.dtbo \
anyspi.dtbo \
apds9960.dtbo \
applepi-dac.dtbo \
at86rf233.dtbo \
audioinjector-addons.dtbo \
audioinjector-ultra.dtbo \
audioinjector-wm8731-audio.dtbo \
audiosense-pi.dtbo \
audremap.dtbo \
balena-fin.dtbo \
bmp085_i2c-sensor.dtbo \
dht11.dtbo \
dionaudio-loco.dtbo \
dionaudio-loco-v2.dtbo \
disable-bt.dtbo \
disable-wifi.dtbo \
dpi18.dtbo \
dpi24.dtbo \
draws.dtbo \
dwc-otg.dtbo \
dwc2.dtbo \
enc28j60.dtbo \
enc28j60-spi2.dtbo \
exc3000.dtbo \
fe-pi-audio.dtbo \
goodix.dtbo \
googlevoicehat-soundcard.dtbo \
gpio-fan.dtbo \
gpio-ir.dtbo \
gpio-ir-tx.dtbo \
gpio-key.dtbo \
gpio-no-bank0-irq.dtbo \
gpio-no-irq.dtbo \
gpio-poweroff.dtbo \
gpio-shutdown.dtbo \
hd44780-lcd.dtbo \
hdmi-backlight-hwhack-gpio.dtbo \
hifiberry-amp.dtbo \
hifiberry-dac.dtbo \
hifiberry-dacplus.dtbo \
hifiberry-dacplusadc.dtbo \
hifiberry-dacplusadcpro.dtbo \
hifiberry-dacplusdsp.dtbo \
hifiberry-dacplushd.dtbo \
hifiberry-digi.dtbo \
hifiberry-digi-pro.dtbo \
hy28a.dtbo \
hy28b.dtbo \
hy28b-2017.dtbo \
i-sabre-q2m.dtbo \
i2c-bcm2708.dtbo \
i2c-gpio.dtbo \
i2c-mux.dtbo \
i2c-pwm-pca9685a.dtbo \
i2c-rtc.dtbo \
i2c-rtc-gpio.dtbo \
i2c-sensor.dtbo \
i2c0.dtbo \
i2c0-bcm2708.dtbo \
i2c1.dtbo \
i2c1-bcm2708.dtbo \
i2c3.dtbo \
i2c4.dtbo \
i2c5.dtbo \
i2c6.dtbo \
i2s-gpio28-31.dtbo \
ilitek251x.dtbo \
imx219.dtbo \
iqaudio-codec.dtbo \
iqaudio-dac.dtbo \
iqaudio-dacplus.dtbo \
iqaudio-digi-wm8804-audio.dtbo \
irs1125.dtbo \
jedec-spi-nor.dtbo \
justboom-both.dtbo \
justboom-dac.dtbo \
justboom-digi.dtbo \
ltc294x.dtbo \
max98357a.dtbo \
mbed-dac.dtbo \
mcp23017.dtbo \
mcp23s17.dtbo \
mcp2515-can0.dtbo \
mcp2515-can1.dtbo \
mcp3008.dtbo \
mcp3202.dtbo \
mcp342x.dtbo \
media-center.dtbo \
merus-amp.dtbo \
midi-uart0.dtbo \
midi-uart1.dtbo \
miniuart-bt.dtbo \
mmc.dtbo \
mpu6050.dtbo \
mz61581.dtbo \
ov5647.dtbo \
papirus.dtbo \
pi3-act-led.dtbo \
pi3-disable-bt.dtbo \
pi3-disable-wifi.dtbo \
pi3-miniuart-bt.dtbo \
pibell.dtbo \
piglow.dtbo \
piscreen.dtbo \
piscreen2r.dtbo \
pisound.dtbo \
pitft22.dtbo \
pitft28-capacitive.dtbo \
pitft28-resistive.dtbo \
pitft35-resistive.dtbo \
pps-gpio.dtbo \
pwm.dtbo \
pwm-2chan.dtbo \
pwm-ir-tx.dtbo \
qca7000.dtbo \
rotary-encoder.dtbo \
rpi-backlight.dtbo \
rpi-cirrus-wm5102.dtbo \
rpi-dac.dtbo \
rpi-display.dtbo \
rpi-ft5406.dtbo \
rpi-poe.dtbo \
rpi-proto.dtbo \
rpi-sense.dtbo \
rpi-tv.dtbo \
rra-digidac1-wm8741-audio.dtbo \
sc16is750-i2c.dtbo \
sc16is752-i2c.dtbo \
sc16is752-spi1.dtbo \
sdhost.dtbo \
sdio.dtbo \
sdtweak.dtbo \
sh1106-spi.dtbo \
smi.dtbo \
smi-dev.dtbo \
smi-nand.dtbo \
spi-gpio35-39.dtbo \
spi-gpio40-45.dtbo \
spi-rtc.dtbo \
spi0-cs.dtbo \
spi0-hw-cs.dtbo \
spi1-1cs.dtbo \
spi1-2cs.dtbo \
spi1-3cs.dtbo \
spi2-1cs.dtbo \
spi2-2cs.dtbo \
spi2-3cs.dtbo \
spi3-1cs.dtbo \
spi3-2cs.dtbo \
spi4-1cs.dtbo \
spi4-2cs.dtbo \
spi5-1cs.dtbo \
spi5-2cs.dtbo \
spi6-1cs.dtbo \
spi6-2cs.dtbo \
ssd1306.dtbo \
ssd1306-spi.dtbo \
ssd1351-spi.dtbo \
superaudioboard.dtbo \
sx150x.dtbo \
tc358743.dtbo \
tc358743-audio.dtbo \
tinylcd35.dtbo \
tpm-slb9670.dtbo \
uart0.dtbo \
uart1.dtbo \
uart2.dtbo \
uart3.dtbo \
uart4.dtbo \
uart5.dtbo \
udrc.dtbo \
upstream.dtbo \
vc4-fkms-v3d.dtbo \
vc4-kms-kippah-7inch.dtbo \
vc4-kms-v3d.dtbo \
vga666.dtbo \
w1-gpio.dtbo \
w1-gpio-pullup.dtbo \
w5500.dtbo \
wittypi.dtbo
targets += dtbs dtbs_install
targets += $(dtbo-y)
always := $(dtbo-y)
clean-files := *.dtbo
arch/arm64/boot/dts/overlays/README 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/act-led-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
from the VPU. There is a special driver for this with a separate DT node,
which has the unfortunate consequence of breaking the act_led_gpio and
act_led_activelow dtparams.
This overlay changes the GPIO controller back to the standard one and
restores the dtparams.
*/
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&act_led>;
frag0: __overlay__ {
gpios = <&gpio 0 0>;
};
};
__overrides__ {
gpio = <&frag0>,"gpios:4";
activelow = <&frag0>,"gpios:8";
};
};
arch/arm64/boot/dts/overlays/adau1977-adc-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for ADAU1977 ADC
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
adau1977: codec@11 {
compatible = "adi,adau1977";
reg = <0x11>;
reset-gpios = <&gpio 5 0>;
AVDD-supply = <&vdd_3v3_reg>;
};
};
};
fragment@1 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@2 {
target = <&sound>;
__overlay__ {
compatible = "adi,adau1977-adc";
i2s-controller = <&i2s>;
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/adau7002-simple-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
adau7002_codec: adau7002-codec {
#sound-dai-cells = <0>;
compatible = "adi,adau7002";
/* IOVDD-supply = <&supply>;*/
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
sound_overlay: __overlay__ {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "adau7002";
simple-audio-card,bitclock-slave = <&dailink0_slave>;
simple-audio-card,frame-slave = <&dailink0_slave>;
simple-audio-card,widgets =
"Microphone", "Microphone Jack";
simple-audio-card,routing =
"PDM_DAT", "Microphone Jack";
status = "okay";
simple-audio-card,cpu {
sound-dai = <&i2s>;
};
dailink0_slave: simple-audio-card,codec {
sound-dai = <&adau7002_codec>;
};
};
};
__overrides__ {
card-name = <&sound_overlay>,"simple-audio-card,name";
};
};
arch/arm64/boot/dts/overlays/ads1015-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* 2016 - Erik Sejr
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
/* ----------- ADS1015 ------------ */
fragment@0 {
target = <&i2c_arm>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ads1015: ads1015 {
compatible = "ti,ads1015";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x48>;
};
};
};
fragment@1 {
target-path = "i2c_arm/ads1015";
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
channel_a: channel_a {
reg = <4>;
ti,gain = <2>;
ti,datarate = <4>;
};
};
};
fragment@2 {
target-path = "i2c_arm/ads1015";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_b: channel_b {
reg = <5>;
ti,gain = <2>;
ti,datarate = <4>;
};
};
};
fragment@3 {
target-path = "i2c_arm/ads1015";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_c: channel_c {
reg = <6>;
ti,gain = <2>;
ti,datarate = <4>;
};
};
};
fragment@4 {
target-path = "i2c_arm/ads1015";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_d: channel_d {
reg = <7>;
ti,gain = <2>;
ti,datarate = <4>;
};
};
};
__overrides__ {
addr = <&ads1015>,"reg:0";
cha_enable = <0>,"=1";
cha_cfg = <&channel_a>,"reg:0";
cha_gain = <&channel_a>,"ti,gain:0";
cha_datarate = <&channel_a>,"ti,datarate:0";
chb_enable = <0>,"=2";
chb_cfg = <&channel_b>,"reg:0";
chb_gain = <&channel_b>,"ti,gain:0";
chb_datarate = <&channel_b>,"ti,datarate:0";
chc_enable = <0>,"=3";
chc_cfg = <&channel_c>,"reg:0";
chc_gain = <&channel_c>,"ti,gain:0";
chc_datarate = <&channel_c>,"ti,datarate:0";
chd_enable = <0>,"=4";
chd_cfg = <&channel_d>,"reg:0";
chd_gain = <&channel_d>,"ti,gain:0";
chd_datarate = <&channel_d>,"ti,datarate:0";
};
};
arch/arm64/boot/dts/overlays/ads1115-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* TI ADS1115 multi-channel ADC overlay
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c_arm>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ads1115: ads1115 {
compatible = "ti,ads1115";
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x48>;
};
};
};
fragment@1 {
target-path = "i2c_arm/ads1115";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_a: channel_a {
reg = <4>;
ti,gain = <1>;
ti,datarate = <7>;
};
};
};
fragment@2 {
target-path = "i2c_arm/ads1115";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_b: channel_b {
reg = <5>;
ti,gain = <1>;
ti,datarate = <7>;
};
};
};
fragment@3 {
target-path = "i2c_arm/ads1115";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_c: channel_c {
reg = <6>;
ti,gain = <1>;
ti,datarate = <7>;
};
};
};
fragment@4 {
target-path = "i2c_arm/ads1115";
__dormant__ {
#address-cells = <1>;
#size-cells = <0>;
channel_d: channel_d {
reg = <7>;
ti,gain = <1>;
ti,datarate = <7>;
};
};
};
__overrides__ {
addr = <&ads1115>,"reg:0";
cha_enable = <0>,"=1";
cha_cfg = <&channel_a>,"reg:0";
cha_gain = <&channel_a>,"ti,gain:0";
cha_datarate = <&channel_a>,"ti,datarate:0";
chb_enable = <0>,"=2";
chb_cfg = <&channel_b>,"reg:0";
chb_gain = <&channel_b>,"ti,gain:0";
chb_datarate = <&channel_b>,"ti,datarate:0";
chc_enable = <0>,"=3";
chc_cfg = <&channel_c>,"reg:0";
chc_gain = <&channel_c>,"ti,gain:0";
chc_datarate = <&channel_c>,"ti,datarate:0";
chd_enable = <0>,"=4";
chd_cfg = <&channel_d>,"reg:0";
chd_gain = <&channel_d>,"ti,gain:0";
chd_datarate = <&channel_d>,"ti,datarate:0";
};
};
arch/arm64/boot/dts/overlays/ads7846-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Generic Device Tree overlay for the ADS7846 touch controller
*
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&spi0>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&spidev0>;
__overlay__ {
status = "disabled";
};
};
fragment@2 {
target = <&spidev1>;
__overlay__ {
status = "disabled";
};
};
fragment@3 {
target = <&gpio>;
__overlay__ {
ads7846_pins: ads7846_pins {
brcm,pins = <255>; /* illegal default value */
brcm,function = <0>; /* in */
brcm,pull = <0>; /* none */
};
};
};
fragment@4 {
target = <&spi0>;
__overlay__ {
/* needed to avoid dtc warning */
#address-cells = <1>;
#size-cells = <0>;
ads7846: ads7846@1 {
compatible = "ti,ads7846";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&ads7846_pins>;
spi-max-frequency = <2000000>;
interrupts = <255 2>; /* high-to-low edge triggered */
interrupt-parent = <&gpio>;
pendown-gpio = <&gpio 255 0>;
/* driver defaults */
ti,x-min = /bits/ 16 <0>;
ti,y-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <0x0FFF>;
ti,y-max = /bits/ 16 <0x0FFF>;
ti,pressure-min = /bits/ 16 <0>;
ti,pressure-max = /bits/ 16 <0xFFFF>;
ti,x-plate-ohms = /bits/ 16 <400>;
};
};
};
__overrides__ {
cs = <&ads7846>,"reg:0";
speed = <&ads7846>,"spi-max-frequency:0";
penirq = <&ads7846_pins>,"brcm,pins:0", /* REQUIRED */
<&ads7846>,"interrupts:0",
<&ads7846>,"pendown-gpio:4";
penirq_pull = <&ads7846_pins>,"brcm,pull:0";
swapxy = <&ads7846>,"ti,swap-xy?";
xmin = <&ads7846>,"ti,x-min;0";
ymin = <&ads7846>,"ti,y-min;0";
xmax = <&ads7846>,"ti,x-max;0";
ymax = <&ads7846>,"ti,y-max;0";
pmin = <&ads7846>,"ti,pressure-min;0";
pmax = <&ads7846>,"ti,pressure-max;0";
xohms = <&ads7846>,"ti,x-plate-ohms;0";
};
};
arch/arm64/boot/dts/overlays/adv7282m-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// SPDX-License-Identifier: GPL-2.0-only
// Definitions for Analog Devices ADV7282-M video to CSI2 bridge on VC I2C bus
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c_vc>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
adv728x: adv728x@21 {
compatible = "adi,adv7282-m";
reg = <0x21>;
status = "okay";
clock-frequency = <24000000>;
port {
adv728x_0: endpoint {
remote-endpoint = <&csi1_ep>;
clock-lanes = <0>;
data-lanes = <1>;
link-frequencies =
/bits/ 64 <297000000>;
mclk-frequency = <12000000>;
};
};
};
};
};
fragment@1 {
target = <&csi1>;
__overlay__ {
status = "okay";
port {
csi1_ep: endpoint {
remote-endpoint = <&adv728x_0>;
};
};
};
};
fragment@2 {
target = <&i2c0_pins>;
__dormant__ {
brcm,pins = <28 29>;
brcm,function = <4>; /* alt0 */
};
};
fragment@3 {
target = <&i2c0_pins>;
__overlay__ {
brcm,pins = <44 45>;
brcm,function = <5>; /* alt1 */
};
};
fragment@4 {
target = <&i2c0_pins>;
__dormant__ {
brcm,pins = <0 1>;
brcm,function = <4>; /* alt0 */
};
};
fragment@5 {
target = <&i2c_vc>;
__overlay__ {
status = "okay";
};
};
__overrides__ {
i2c_pins_0_1 = <0>,"-2-3+4";
i2c_pins_28_29 = <0>,"+2-3-4";
addr = <&adv728x>,"reg:0";
};
};
arch/arm64/boot/dts/overlays/adv728x-m-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// SPDX-License-Identifier: GPL-2.0-only
// Definitions for Analog Devices ADV728[0|1|2]-M video to CSI2 bridges on VC
// I2C bus
#include "adv7282m-overlay.dts"
/{
compatible = "brcm,bcm2835";
// Fragment numbers deliberately high to avoid conflicts with the
// included adv7282m overlay file.
fragment@101 {
target = <&adv728x>;
__dormant__ {
compatible = "adi,adv7280-m";
};
};
fragment@102 {
target = <&adv728x>;
__dormant__ {
compatible = "adi,adv7281-m";
};
};
fragment@103 {
target = <&adv728x>;
__dormant__ {
compatible = "adi,adv7281-ma";
};
};
__overrides__ {
adv7280m = <0>, "+101";
adv7281m = <0>, "+102";
adv7281ma = <0>, "+103";
};
};
arch/arm64/boot/dts/overlays/akkordion-iqdacplus-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for Digital Dreamtime Akkordion using IQaudIO DAC+ or DACZero
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pcm5122@4c {
#sound-dai-cells = <0>;
compatible = "ti,pcm5122";
reg = <0x4c>;
AVDD-supply = <&vdd_3v3_reg>;
DVDD-supply = <&vdd_3v3_reg>;
CPVDD-supply = <&vdd_3v3_reg>;
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
frag2: __overlay__ {
compatible = "iqaudio,iqaudio-dac";
card_name = "Akkordion";
dai_name = "IQaudIO DAC";
dai_stream_name = "IQaudIO DAC HiFi";
i2s-controller = <&i2s>;
status = "okay";
};
};
__overrides__ {
24db_digital_gain = <&frag2>,"iqaudio,24db_digital_gain?";
};
};
arch/arm64/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Definitions for Allo Boss DAC board
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target-path = "/clocks";
__overlay__ {
boss_osc: boss_osc {
compatible = "allo,dac-clk";
#clock-cells = <0>;
};
};
};
fragment@1 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@2 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pcm5122@4d {
#sound-dai-cells = <0>;
compatible = "ti,pcm5122";
clocks = <&boss_osc>;
reg = <0x4d>;
status = "okay";
};
};
};
fragment@3 {
target = <&sound>;
boss_dac: __overlay__ {
compatible = "allo,boss-dac";
i2s-controller = <&i2s>;
mute-gpios = <&gpio 6 1>;
status = "okay";
};
};
__overrides__ {
24db_digital_gain = <&boss_dac>,"allo,24db_digital_gain?";
slave = <&boss_dac>,"allo,slave?";
};
};
arch/arm64/boot/dts/overlays/allo-digione-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for Allo DigiOne
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wm8804@3b {
#sound-dai-cells = <0>;
compatible = "wlf,wm8804";
reg = <0x3b>;
PVDD-supply = <&vdd_3v3_reg>;
DVDD-supply = <&vdd_3v3_reg>;
status = "okay";
wlf,reset-gpio = <&gpio 17 0>;
};
};
};
fragment@2 {
target = <&sound>;
__overlay__ {
compatible = "allo,allo-digione";
i2s-controller = <&i2s>;
status = "okay";
clock44-gpio = <&gpio 5 0>;
clock48-gpio = <&gpio 6 0>;
};
};
};
arch/arm64/boot/dts/overlays/allo-katana-dac-audio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Definitions for Allo Katana DAC boards
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
cpu_port: port {
cpu_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
bitclock-master = <&codec_endpoint>;
frame-master = <&codec_endpoint>;
dai-format = "i2s";
};
};
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
allo-katana-codec@30 {
#sound-dai-cells = <0>;
compatible = "allo,allo-katana-codec";
reg = <0x30>;
port {
codec_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
};
};
};
fragment@2 {
target = <&sound>;
katana_dac: __overlay__ {
compatible = "audio-graph-card";
label = "Allo Katana";
dais = <&cpu_port>;
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Definitions for Allo Piano DAC (2.0/2.1) boards
*
* NB. The Piano DAC 2.1 board contains 2x TI PCM5142 DAC's. One DAC is stereo
* (left/right) and the other provides a subwoofer output, using DSP on the
* chip for digital high/low pass crossover.
* The initial support for this hardware, that doesn't require any codec driver
* modifications, uses only one DAC chip for stereo (left/right) output, the
* chip with 0x4c slave address. The other chip at 0x4d is currently ignored!
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pcm5142@4c {
#sound-dai-cells = <0>;
compatible = "ti,pcm5142";
reg = <0x4c>;
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
piano_dac: __overlay__ {
compatible = "allo,piano-dac";
i2s-controller = <&i2s>;
status = "okay";
};
};
__overrides__ {
24db_digital_gain =
<&piano_dac>,"allo,24db_digital_gain?";
};
};
arch/arm64/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for Piano DAC
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
allo_pcm5122_4c: pcm5122@4c {
#sound-dai-cells = <0>;
compatible = "ti,pcm5122";
reg = <0x4c>;
status = "okay";
};
allo_pcm5122_4d: pcm5122@4d {
#sound-dai-cells = <0>;
compatible = "ti,pcm5122";
reg = <0x4d>;
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
piano_dac: __overlay__ {
compatible = "allo,piano-dac-plus";
audio-codec = <&allo_pcm5122_4c &allo_pcm5122_4d>;
i2s-controller = <&i2s>;
mute1-gpios = <&gpio 6 1>;
mute2-gpios = <&gpio 25 1>;
status = "okay";
};
};
__overrides__ {
24db_digital_gain =
<&piano_dac>,"allo,24db_digital_gain?";
glb_mclk =
<&piano_dac>,"allo,glb_mclk?";
};
};
arch/arm64/boot/dts/overlays/anyspi-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Universal device tree overlay for SPI devices
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&spidev0>;
__dormant__ {
status = "disabled";
};
};
fragment@1 {
target = <&spidev1>;
__dormant__ {
status = "disabled";
};
};
fragment@2 {
target-path = "spi1/spidev@0";
__dormant__ {
status = "disabled";
};
};
fragment@3 {
target-path = "spi1/spidev@1";
__dormant__ {
status = "disabled";
};
};
fragment@4 {
target-path = "spi1/spidev@2";
__dormant__ {
status = "disabled";
};
};
fragment@5 {
target-path = "spi2/spidev@0";
__dormant__ {
status = "disabled";
};
};
fragment@6 {
target-path = "spi2/spidev@1";
__dormant__ {
status = "disabled";
};
};
fragment@7 {
target-path = "spi2/spidev@2";
__dormant__ {
status = "disabled";
};
};
fragment@8 {
target = <&spi0>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_00: anyspi@0 {
reg = <0>;
spi-max-frequency = <500000>;
};
};
};
fragment@9 {
target = <&spi0>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_01: anyspi@1 {
reg = <1>;
spi-max-frequency = <500000>;
};
};
};
fragment@10 {
target = <&spi1>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_10: anyspi@0 {
reg = <0>;
spi-max-frequency = <500000>;
};
};
};
fragment@11 {
target = <&spi1>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_11: anyspi@1 {
reg = <1>;
spi-max-frequency = <500000>;
};
};
};
fragment@12 {
target = <&spi1>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_12: anyspi@2 {
reg = <2>;
spi-max-frequency = <500000>;
};
};
};
fragment@13 {
target = <&spi2>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_20: anyspi@0 {
reg = <0>;
spi-max-frequency = <500000>;
};
};
};
fragment@14 {
target = <&spi2>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_21: anyspi@1 {
reg = <1>;
spi-max-frequency = <500000>;
};
};
};
fragment@15 {
target = <&spi2>;
__dormant__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
anyspi_22: anyspi@2 {
reg = <2>;
spi-max-frequency = <500000>;
};
};
};
__overrides__ {
spi0-0 = <0>, "+0+8";
spi0-1 = <0>, "+1+9";
spi1-0 = <0>, "+2+10";
spi1-1 = <0>, "+3+11";
spi1-2 = <0>, "+4+12";
spi2-0 = <0>, "+5+13";
spi2-1 = <0>, "+6+14";
spi2-2 = <0>, "+7+15";
dev = <&anyspi_00>,"compatible",
<&anyspi_01>,"compatible",
<&anyspi_10>,"compatible",
<&anyspi_11>,"compatible",
<&anyspi_12>,"compatible",
<&anyspi_20>,"compatible",
<&anyspi_21>,"compatible",
<&anyspi_22>,"compatible";
speed = <&anyspi_00>, "spi-max-frequency:0",
<&anyspi_01>, "spi-max-frequency:0",
<&anyspi_10>, "spi-max-frequency:0",
<&anyspi_11>, "spi-max-frequency:0",
<&anyspi_12>, "spi-max-frequency:0",
<&anyspi_20>, "spi-max-frequency:0",
<&anyspi_21>, "spi-max-frequency:0",
<&anyspi_22>, "spi-max-frequency:0";
};
};
arch/arm64/boot/dts/overlays/apds9960-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for APDS-9960 ambient light and gesture sensor
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c1>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&gpio>;
__overlay__ {
apds9960_pins: apds9960_pins@39 {
brcm,pins = <4>;
brcm,function = <0>;
};
};
};
fragment@2 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
apds9960: apds@39 {
compatible = "avago,apds9960";
reg = <0x39>;
status = "okay";
};
};
};
fragment@3 {
target = <&i2c1>;
__overlay__ {
apds9960_irq: apds@39 {
#interrupt-cells=<2>;
interrupt-parent = <&gpio>;
interrupts = <4 1>;
};
};
};
__overrides__ {
gpiopin = <&apds9960_pins>,"brcm,pins:0",
<&apds9960_irq>,"interrupts:0";
noints = <0>,"!1!3";
};
};
arch/arm64/boot/dts/overlays/applepi-dac-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
simple-audio-card,name = "ApplePi-DAC";
status = "okay";
playback_link: simple-audio-card,dai-link@1 {
format = "i2s";
p_cpu_dai: cpu {
sound-dai = <&i2s>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
p_codec_dai: codec {
sound-dai = <&codec_out>;
};
};
};
};
fragment@1 {
target-path = "/";
__overlay__ {
codec_out: pcm1794a-codec {
#sound-dai-cells = <0>;
compatible = "ti,pcm1794a";
status = "okay";
};
};
};
fragment@2 {
target = <&i2s>;
__overlay__ {
#sound-dai-cells = <0>;
status = "okay";
};
};
};
/*
Written by: Leonid Ayzenshtat
Company: Orchard Audio (www.orchardaudio.com)
compile with:
dtc -@ -H epapr -O dtb -o ApplePi-DAC.dtbo -W no-unit_address_vs_reg ApplePi-DAC.dts
*/
arch/arm64/boot/dts/overlays/at86rf233-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/* Overlay for Atmel AT86RF233 IEEE 802.15.4 WPAN transceiver on spi0.0 */
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&spi0>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
lowpan0: at86rf233@0 {
compatible = "atmel,at86rf233";
reg = <0>;
interrupt-parent = <&gpio>;
interrupts = <23 4>; /* active high */
reset-gpio = <&gpio 24 1>;
sleep-gpio = <&gpio 25 1>;
spi-max-frequency = <3000000>;
xtal-trim = /bits/ 8 <0xf>;
};
};
};
fragment@1 {
target = <&spidev0>;
__overlay__ {
status = "disabled";
};
};
fragment@2 {
target = <&gpio>;
__overlay__ {
lowpan0_pins: lowpan0_pins {
brcm,pins = <23 24 25>;
brcm,function = <0 1 1>; /* in out out */
};
};
};
__overrides__ {
interrupt = <&lowpan0>, "interrupts:0",
<&lowpan0_pins>, "brcm,pins:0";
reset = <&lowpan0>, "reset-gpio:4",
<&lowpan0_pins>, "brcm,pins:4";
sleep = <&lowpan0>, "sleep-gpio:4",
<&lowpan0_pins>, "brcm,pins:8";
speed = <&lowpan0>, "spi-max-frequency:0";
trim = <&lowpan0>, "xtal-trim.0";
};
};
arch/arm64/boot/dts/overlays/audioinjector-addons-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for audioinjector.net audio add on soundcard
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
cs42448_mclk: codec-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <49152000>;
};
};
};
fragment@2 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
cs42448: cs42448@48 {
#sound-dai-cells = <0>;
compatible = "cirrus,cs42448";
reg = <0x48>;
clocks = <&cs42448_mclk>;
clock-names = "mclk";
status = "okay";
};
};
};
fragment@3 {
target = <&sound>;
snd: __overlay__ {
compatible = "ai,audioinjector-octo-soundcard";
mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>,
<&gpio 24 0>;
reset-gpios = <&gpio 5 0>;
i2s-controller = <&i2s>;
codec = <&cs42448>;
status = "okay";
};
};
__overrides__ {
non-stop-clocks = <&snd>, "non-stop-clocks?";
};
};
arch/arm64/boot/dts/overlays/audioinjector-ultra-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for audioinjector.net audio add on soundcard
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
cs4265: cs4265@4e {
#sound-dai-cells = <0>;
compatible = "cirrus,cs4265";
reg = <0x4e>;
reset-gpios = <&gpio 5 0>;
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
__overlay__ {
compatible = "simple-audio-card";
i2s-controller = <&i2s>;
status = "okay";
simple-audio-card,name = "audioinjector-ultra";
simple-audio-card,widgets =
"Line", "OUTPUTS",
"Line", "INPUTS";
simple-audio-card,routing =
"OUTPUTS","LINEOUTL",
"OUTPUTS","LINEOUTR",
"OUTPUTS","SPDIFOUT",
"LINEINL","INPUTS",
"LINEINR","INPUTS",
"MICL","INPUTS",
"MICR","INPUTS";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound_master>;
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,cpu {
sound-dai = <&i2s>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
};
sound_master: simple-audio-card,codec {
sound-dai = <&cs4265>;
system-clock-frequency = <12288000>;
};
};
};
};
arch/arm64/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for audioinjector.net audio add on soundcard
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wm8731@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8731";
reg = <0x1a>;
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
__overlay__ {
compatible = "ai,audioinjector-pi-soundcard";
i2s-controller = <&i2s>;
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/audiosense-pi-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for audiosense add on soundcard
/dts-v1/;
/plugin/;
#include <dt-bindings/pinctrl/bcm2835.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
codec_reg_1v8: codec-reg-1v8 {
compatible = "regulator-fixed";
regulator-name = "tlv320aic3204_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};
fragment@2 {
target = <&gpio>;
__overlay__ {
codec_rst: codec-rst {
brcm,pins = <26>;
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
};
};
fragment@3 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
/* audio external oscillator */
codec_osc: codec_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12000000>; /* 12 MHz */
};
codec: tlv320aic32x4@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
clocks = <&codec_osc>;
clock-names = "mclk";
iov-supply = <&vdd_3v3_reg>;
ldoin-supply = <&vdd_3v3_reg>;
gpio-controller;
#gpio-cells = <2>;
reset-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
};
fragment@4 {
target = <&sound>;
__overlay__ {
compatible = "as,audiosense-pi";
i2s-controller = <&i2s>;
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/audremap-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&audio_pins>;
frag0: __overlay__ {
};
};
fragment@1 {
target = <&audio_pins>;
__overlay__ {
brcm,pins = < 12 13 >;
brcm,function = < 4 >; /* alt0 alt0 */
};
};
fragment@2 {
target = <&audio_pins>;
__dormant__ {
brcm,pins = < 18 19 >;
brcm,function = < 2 >; /* alt5 alt5 */
};
};
__overrides__ {
swap_lr = <&frag0>, "swap_lr?";
enable_jack = <&frag0>, "enable_jack?";
pins_12_13 = <0>,"+1-2";
pins_18_19 = <0>,"-1+2";
};
};
arch/arm64/boot/dts/overlays/balena-fin-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&mmcnr>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&sdio_pins>;
bus-width = <4>;
brcm,overclock-50 = <35>;
status = "okay";
};
};
fragment@1 {
target = <&gpio>;
__overlay__ {
sdio_pins: sdio_pins {
brcm,pins = <34 35 36 37 38 39>;
brcm,function = <7>; /* ALT3 = SD1 */
brcm,pull = <0 2 2 2 2 2>;
};
power_ctrl_pins: power_ctrl_pins {
brcm,pins = <40>;
brcm,function = <1>; // out
};
};
};
fragment@2 {
target-path = "/";
__overlay__ {
// We should switch to mmc-pwrseq-sd8787 after making it
// compatible with sd8887
// Currently that module requires two GPIOs to function since it
// targets a slightly different chip
power_ctrl: power_ctrl {
compatible = "gpio-poweroff";
gpios = <&gpio 40 1>;
force;
pinctrl-names = "default";
pinctrl-0 = <&power_ctrl_pins>;
};
i2c_soft: i2c@0 {
compatible = "i2c-gpio";
gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
i2c-gpio,delay-us = <5>;
i2c-gpio,scl-open-drain;
i2c-gpio,sda-open-drain;
#address-cells = <1>;
#size-cells = <0>;
};
sd8xxx-wlan {
drvdbg = <0x6>;
drv_mode = <0x1>;
cfg80211_wext = <0xf>;
sta_name = "wlan";
wfd_name = "p2p";
cal_data_cfg = "none";
};
};
};
fragment@3 {
target = <&i2c_soft>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
gpio_expander: gpio_expander@20 {
compatible = "nxp,pca9554";
gpio-controller;
#gpio-cells = <2>;
reg = <0x20>;
status = "okay";
};
// rtc clock
ds1307: ds1307@68 {
compatible = "dallas,ds1307";
reg = <0x68>;
status = "okay";
};
// RGB LEDs (>= v1.1.0)
pca9633: pca9633@62 {
compatible = "nxp,pca9633";
reg = <0x62>;
#address-cells = <1>;
#size-cells = <0>;
red@0 {
label = "red";
reg = <0>;
linux,default-trigger = "none";
};
green@1 {
label = "green";
reg = <1>;
linux,default-trigger = "none";
};
blue@2 {
label = "blue";
reg = <2>;
linux,default-trigger = "none";
};
unused@3 {
label = "unused";
reg = <3>;
linux,default-trigger = "none";
};
};
};
};
};
arch/arm64/boot/dts/overlays/bmp085_i2c-sensor-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for BMP085/BMP180 digital barometric pressure and temperature sensors from Bosch Sensortec
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c_arm>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
default-oversampling = <3>;
status = "okay";
};
};
};
};
arch/arm64/boot/dts/overlays/dht11-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Overlay for the DHT11/21/22 humidity/temperature sensor modules.
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target-path = "/";
__overlay__ {
dht11: dht11@0 {
compatible = "dht11";
pinctrl-names = "default";
pinctrl-0 = <&dht11_pins>;
gpios = <&gpio 4 0>;
status = "okay";
};
};
};
fragment@1 {
target = <&gpio>;
__overlay__ {
dht11_pins: dht11_pins@0 {
brcm,pins = <4>;
brcm,function = <0>; // in
brcm,pull = <0>; // off
};
};
};
__overrides__ {
gpiopin = <&dht11_pins>,"brcm,pins:0",
<&dht11_pins>, "reg:0",
<&dht11>,"gpios:4",
<&dht11>,"reg:0";
};
};
arch/arm64/boot/dts/overlays/dionaudio-loco-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Definitions for Dion Audio LOCO DAC-AMP
/*
* PCM5242 DAC (in hardware mode) and TPA3118 AMP.
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
pcm5102a-codec {
#sound-dai-cells = <0>;
compatible = "ti,pcm5102a";
status = "okay";
};
};
};
fragment@2 {
target = <&sound>;
__overlay__ {
compatible = "dionaudio,loco-pcm5242-tpa3118";
i2s-controller = <&i2s>;
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/dionaudio-loco-v2-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/*
* Definitions for Dion Audio LOCO-V2 DAC-AMP
* eg. dtoverlay=dionaudio-loco-v2
*
* PCM5242 DAC (in software mode) and TPA3255 AMP.
*/
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&sound>;
frag0: __overlay__ {
compatible = "dionaudio,dionaudio-loco-v2";
i2s-controller = <&i2s>;
status = "okay";
};
};
fragment@1 {
target = <&i2s>;
__overlay__ {
status = "okay";
};
};
fragment@2 {
target = <&i2c1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
pcm5122@4c {
#sound-dai-cells = <0>;
compatible = "ti,pcm5122";
reg = <0x4d>;
status = "okay";
};
};
};
__overrides__ {
24db_digital_gain = <&frag0>,"dionaudio,24db_digital_gain?";
};
};
arch/arm64/boot/dts/overlays/disable-bt-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15.
To disable the systemd service that initialises the modem so it doesn't use
the UART:
sudo systemctl disable hciuart
*/
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&uart1>;
__overlay__ {
status = "disabled";
};
};
fragment@1 {
target = <&uart0>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
};
fragment@2 {
target = <&uart0_pins>;
__overlay__ {
brcm,pins;
brcm,function;
brcm,pull;
};
};
fragment@3 {
target = <&bt_pins>;
__overlay__ {
brcm,pins;
brcm,function;
brcm,pull;
};
};
fragment@4 {
target-path = "/aliases";
__overlay__ {
serial0 = "/soc/serial@7e201000";
serial1 = "/soc/serial@7e215040";
};
};
};
arch/arm64/boot/dts/overlays/disable-wifi-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&mmc>;
__overlay__ {
status = "disabled";
};
};
fragment@1 {
target = <&mmcnr>;
__overlay__ {
status = "disabled";
};
};
};
arch/arm64/boot/dts/overlays/dpi18-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
// There is no DPI driver module, but we need a platform device
// node (that doesn't already use pinctrl) to hang the pinctrl
// reference on - leds will do
fragment@0 {
target = <&fb>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&dpi18_pins>;
};
};
fragment@1 {
target = <&vc4>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&dpi18_pins>;
};
};
fragment@2 {
target = <&gpio>;
__overlay__ {
dpi18_pins: dpi18_pins {
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20
21>;
brcm,function = <6>; /* alt2 */
brcm,pull = <0>; /* no pull */
};
};
};
};
arch/arm64/boot/dts/overlays/dpi24-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
// There is no DPI driver module, but we need a platform device
// node (that doesn't already use pinctrl) to hang the pinctrl
// reference on - leds will do
fragment@0 {
target = <&fb>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&dpi24_pins>;
};
};
fragment@1 {
target = <&vc4>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&dpi24_pins>;
};
};
fragment@2 {
target = <&gpio>;
__overlay__ {
dpi24_pins: dpi24_pins {
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27>;
brcm,function = <6>; /* alt2 */
brcm,pull = <0>; /* no pull */
};
};
};
};
arch/arm64/boot/dts/overlays/dwc-otg-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&usb>;
__overlay__ {
compatible = "brcm,bcm2708-usb";
status = "okay";
};
};
};
arch/arm64/boot/dts/overlays/dwc2-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&usb>;
#address-cells = <1>;
#size-cells = <1>;
dwc2_usb: __overlay__ {
compatible = "brcm,bcm2835-usb";
dr_mode = "otg";
g-np-tx-fifo-size = <32>;
g-rx-fifo-size = <558>;
g-tx-fifo-size = <512 512 512 512 512 256 256>;
status = "okay";
};
};
__overrides__ {
dr_mode = <&dwc2_usb>, "dr_mode";
g-np-tx-fifo-size = <&dwc2_usb>,"g-np-tx-fifo-size:0";
g-rx-fifo-size = <&dwc2_usb>,"g-rx-fifo-size:0";
};
};
arch/arm64/boot/dts/overlays/enc28j60-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
// Overlay for the Microchip ENC28J60 Ethernet Controller
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
target = <&spi0>;
__overlay__ {
/* needed to avoid dtc warning */
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
eth1: enc28j60@0{
compatible = "microchip,enc28j60";
reg = <0>; /* CE0 */
pinctrl-names = "default";
pinctrl-0 = <&eth1_pins>;
interrupt-parent = <&gpio>;
interrupts = <25 0x2>; /* falling edge */
spi-max-frequency = <12000000>;
status = "okay";
};
};
};
fragment@1 {
target = <&spidev0>;
__overlay__ {
status = "disabled";
};
};
fragment@2 {
target = <&gpio>;
__overlay__ {
eth1_pins: eth1_pins {
brcm,pins = <25>;
brcm,function = <0>; /* in */
brcm,pull = <0>; /* none */
};
};
};
__overrides__ {
int_pin = <&eth1>, "interrupts:0",
<&eth1_pins>, "brcm,pins:0";
speed = <&eth1>, "spi-max-frequency:0";
};
};
arch/arm64/boot/dts/overlays/gpio-no-bank0-irq-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/ {
compatible = "brcm,bcm2835";
fragment@0 {
// Configure the gpio pin controller
target = <&gpio>;
__overlay__ {
interrupts = <255 255>, <2 18>;
};
};
};
arch/arm64/boot/dts/overlays/i2c-bcm2708-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
/dts-v1/;
/plugin/;
/{
compatible = "brcm,bcm2835";
fragment@0 {
target = <&i2c_arm>;
__overlay__ {
compatible = "brcm,bcm2708-i2c";
};
};
};
arch/arm64/boot/dts/overlays/i2c0-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/i2c1-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/i2c3-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/i2c4-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/i2c5-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/i2c6-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/mmc-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/pwm-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/sdio-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/smi-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
arch/arm64/boot/dts/overlays/udrc-overlay.dts 已删除 100644 → 0
浏览文件 @ 7d1ed3ae
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或